Fandom Connect Operating INSTAD Buzz RF In Stadium Transmission System User Manual ST100NT x

Download:
Mirror Download [FCC.gov]
Document ID	3720961
Application ID	HnzU/E7IKFJefXtSOJS1lg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.9kB (111212 bits)
Date Submitted	2018-01-19 00:00:00
Date Available	2018-01-19 00:00:00
Creation Date	2018-01-11 21:10:22
Producing Software	Nitro PDF PrimoPDF
Document Lastmod	2018-01-12 09:22:21
Document Title	Microsoft Word - ST100NT_User Manual.docx
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	Mark

RF In Stadium Transmission System
User’s Manual
Network Transmitter
Model: ST100NT
2018-01-11
Charge Battery Pack
Unit contains a 7.2V NiMH 3000mAh battery pack. Quick charge with a charger designed for NiMH cells
using a current of 1.5A within +10°C to +40°C. Battery pack is not charged when connected to external
12VDC power. Battery pack must be removed and charged separately.
Install Antennas
Attach provided antennas. Hand Tighten only.
•
•
902-928 MHz RP-SMA: Nearson S1551AH-915S (no stripes)
433 MHz RP-SMA: Linx ANT-433-CW-QW (red stripes)
Switch On
Push the power switch to the ON position. Unit boots in 5 seconds. Heartbeat 1Hz pulse red ring LED
indicates the unit is running and ready for operation.
Switch On Master Controller
Toggle power switch to the ON position on the mating ST100MC Master Controller. Wait 20 seconds for
the unit to boot.
Set Frequency
Unit supports operation from 430.87 to 436.87 MHz in 50kHz steps. See Appendix A for complete
channel list. Use ST100MC Master Controller to configure the operating frequency and visual blinking
pattern parameters using USB connection with terminal emulation program. 9600/n/8/1.
Push Activation Button
Press any of the keypad buttons on the Master Controller to generate the activation signal. Signal is
generated for 4.8s.
Specifications
Frequency: 902-928 MHz control network, 430.87 – 436.87 MHz activation channel (121 selectable).
Rated Power: 1W (902-928 MHz control network), -15dBm EIRP average (433 MHz)
Battery Life: 75h continuous (+10°C to +40°C). -20% derating at 0°C, -50% derating at -10°C. Sleep
mode extends time between charges in the case of longer duration installs.
Appendix A: Channels
Channel
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Freq (MHz)
430.87
430.92
430.97
431.02
431.07
431.12
431.17
431.22
431.27
431.32
431.37
431.42
431.47
431.52
431.57
431.62
431.67
431.72
431.77
431.82
431.87
431.92
431.97
432.02
432.07
432.12
432.17
432.22
432.27
432.32
432.37
432.42
432.47
432.52
432.57
432.62
432.67
432.72
432.77
432.82
Channel
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
Freq (MHz)
432.92
432.97
433.02
433.07
433.12
433.17
433.22
433.27
433.32
433.37
433.42
433.47
433.52
433.57
433.62
433.67
433.72
433.77
433.82
433.87
433.92
433.97
434.02
434.07
434.12
434.17
434.22
434.27
434.32
434.37
434.42
434.47
434.52
434.57
434.62
434.67
434.72
434.77
434.82
434.87
Channel
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
Freq (MHz)
434.92
434.97
435.02
435.07
435.12
435.17
435.22
435.27
435.32
435.37
435.42
435.47
435.52
435.57
435.62
435.67
435.72
435.77
435.82
435.87
435.92
435.97
436.02
436.07
436.12
436.17
436.22
436.27
436.32
436.37
436.42
436.47
436.52
436.57
436.62
436.67
436.72
436.77
436.82
436.87
Appendix B: Regulatory Statements
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
This radio transmitter (IC: 11838A-INSTAD) has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
Dipole (2.0 dBi), 90° articulated, RP-SMA, 204mm, 902-928 MHz, p/n: S1551AH-915S
¼ Wave (3.3 dBi), RP-SMA, 173mm, 433 MHz, p/n: ANT-433-CW-QW

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Author                          : Mark
Create Date                     : 2018:01:11 21:10:22+05:00
Modify Date                     : 2018:01:12 09:22:21-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Mark
Title                           : Microsoft Word - ST100NT_User Manual.docx
Creator Tool                    : PrimoPDF http://www.primopdf.com
Metadata Date                   : 2018:01:12 09:22:21-05:00
Producer                        : Nitro PDF PrimoPDF
Document ID                     : uuid:e13580c3-ba38-49c2-a03d-8bb30a4fc2b4
Instance ID                     : uuid:9cd92a2b-be17-4c99-834e-852940e0d1a6
Page Count                      : 4

EXIF Metadata provided by EXIF.tools