Faurecia Clarion Electronics FZ501 CAR AUDIO User Manual
Clarion Co Ltd CAR AUDIO
UserManual.wiki
>
Faurecia Clarion Electronics
>
FZ501 User Manual
user manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![English6[CONTROL] Knob• Power on (press)• Power off (press “2.sec.” -> rotate it select “POWER OFF“ ->press)• Adjust volume level (rotate)• Toggle the audio source (press)• Previous/Next Search (press - left/right )• Select tuner band (press - up)(1sec.)• MP3/WMA mode – Search function.• BT mode – Terminate call• RADIO mode – PTY select.• AUX mode – No function.• USB mode – Search function• iPod mode – iPod menu3. CONTROLSOperational PanelNames of Button[CONTROL] [RESET] USB Slot AUX Jack](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-7.png)
![7EnglishRemote ControlNotes of remote control usingReplacing the lithium battery of remote control unit.When the range of the operation of the card remote control becomes short or no functions while operating. Replace the battery with a new lithium battery. Make sure the battery Polarity replacement is correct.1. Pull out the battery holder while pressing the stopper. 2. Insert the button-type battery with the stamped(+) mark facing upward. Insert the battery holder into the remote control.[SRC] Button• Toggle the audio source[ , ] Buttons• Preset station up / down• Previous / next track• Search (long press)[SCN/PS/AS] Button• Scan play / Preset scan• Auto memory store (long press)[BAND/TOP] Button• Select tuner band• Top play (long press)[ , ] Buttons• Volume up / down[ ] Button• Play / Pause[ISR] Button• Recall ISR station stored in memory• Store current station in ISR memory (long press)• iTunes Tagging (when connected with HD Radio tuner)[DISP] Button• Display switch[RDM] Button • Random play[RPT] Button • Repeat play[MUTE] Button• Mute the volume[1~6] Buttons • [1] Button: Scan play / Preset station 1. • [2] Button: Repeat play / Preset station 2. • [3] Button: Random play / Preset station 3. • [4] Button: Play / Pause / Top play (long press) / Preset station 4. • [5] Button: Previous folder / Preset station 5. 10 tracks down (long press) • [6] Button: Next folder / Preset station 6. 10 tracks up (long press)[SOUND] Button • Sound effect setting(CR2025)CR 2025[ , ][ISR][AF/RPT][SOUND][RDM][ , ][DISP][1~6] [MUTE][SCN/PS/AS][ ][BAND/TOP]](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-8.png)
![English8Volume adjustmentTurn the [CONTROL] knob on the front panel.The adjustable range of volume is 0 to 40.CAUTIONWhile driving, keep the volume level at which external sounds can be heard.Playing source selectionPress [CONTROL] knob on the front panel repeatedly to choose desired playing source.Notes:• Playing source selection means selecting work mode, such as HD RADIO mode, and AUX mode, etc.Display system timePress the [DISP] button on the remote control to switch the display information, system time and playing source.RESETNote:* When the [RESET] button is pressed,frequencies of radio stations, titles, etc.stored in memory are cleared.5. OPERATIONSBasic OperationsNote:• Refer to the diagrams in “3. CONTROLS” when reading this chapter.CAUTIONWhen the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.Power on / offNotes:• Start the engine before using this unit.• Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.1. Start the engine. The power button / knob illumination on the unit will light up. Engine ON position2. Press the [CONTROL] knob on the front panel to turn on the power under standby mode. The unit goes back to the last status after power on.3. Press the [CONTROL] knob on the front panel to turn off the power.MutePress the [MUTE] button on the remote control to mute the volume from the unit.Note: Doing the operation above again or adjusting volume will release muting.RESET](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-9.png)
![9EnglishAt all mode, press and hold [CONTROL] knob (2sec.), and rotate the [CONTROL] knob choose ADJUST, then press the [CONTROL] knob to enter system setup. Press [CONTROL] knob (left / right) to select options, rotate the [CONTROL] knob to adjust. CLOCKPress the [CONTROL] knob (right) to choose minute, and rotate the [CONTROL] knob set minute.Press the [CONTROL] knob (left) to choose hour, and rotate the [CONTROL] knob set hour.PASSWORD (SIRIUS mode)Press the [CONTROL] knob to enter old password, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to confirm after input all 4 digit. Then input a new 4-digit number as above. (Original password: 0000)LOCK (SIRIUS mode)Press the [CONTROL] knob to lock current station, rotate the [CONTROL] the knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Long press the knob to confirm after input all 4 digit password.UNLOCK (SIRIUS mode)Press the [CONTROL] knob to unlock all locked stations, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to conrm after input all 4 digit password.UNSKIP (SIRIUS mode)Press and hold the [CONTROL] knob to unskip all channels. DX/LO (RADIO mode)Rotate the [CONTROL] knob to choose radio local or distant at RADIO mode.• LO: Only stations with strong signal can be received.• DX: Stations with strong and weak signals can be received.System SetupPCH MEMO (RADIO mode)Rotate the [CONTROL] knob to choose PCH 1 / PCH 2 / PCH 3 / PCH 4 / PCH 5 or PCH 6, press and hold [CONTROL] knob (2sec.) to store it in the memory.AUX SENS (AUX mode)Rotate the [CONTROL] knob to choose AUX Input sensitivity LOW, MID or HIGH at AUX mode.AUTO CON (BT mode): ON/OFFRotate the [CONTROL] knob to choose AUTO CON ON or OFF.PIN CODEPress the [CONTROL] knob, rotate the [CONTROL] knob to select a digit, press the [CONTROL] knob (left / right) to move the cursor. Press the [CONTROL] knob to conrm.The PIN CODE default setting is “ 0000 “.MIC SEL (BT mode)Rotate the [VOLUME] knob to choose microphone EXTERNAL or INTERNAL.MIC GAIN (BT mode)Rotate the [VOLUME] knob to choose Mic gain: 1, 2, 3, 4, 5.You can change the gain of MIC when a telephone partner cannot hear your voice.SCRN SVR: ON/OFFRotate the [CONTROL] knob to choose SCRN SVR (screen saver) ON or OFF.SCROLL: ON/OFFFor track information that is longer than the display panel:When SCROLL is ON, the LCD will display ID3 TAG information cyclely, e.g.: TRACK->FOLDER->FILE->ALBUM->TITLE->ARTIST->TRACK->...When SCROLL is OFF, the LCD will display one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by press [DISP] button on the remote control.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-10.png)
![English10System SetupHD Radio OperationsS-CTRL (IPOD mode) : ON/OFFRotate the [CONTROL] knob to choose S-CTRL (Simple control) ON or OFF.* Refer to P15.DIMMER: ON/OFFRotate the [CONTROL] knob to choose DIMMER ON or OFF.• ON: LCD dimmer is active when small light of vehicle is turned ON.• OFF: LCD always maximum brightness regardless of the vehicle small light.REAR/S-WRotate the [CONTROL] knob to choose REAR or S-WOOFER(SUB-WOOFER).SW PHASERotate the [CONTROL] knob to choose REVERSE or NORMAL.BEEP: ON/OFFRotate the [CONTROL] knob to choose button beep sound ON or OFF.SOUNDPress the [CONTROL] knob to enter sound effect setting mode. First press shows current EQ. Rotate the [CONTROL] knob to changes BEAT EQ in this order:OFF -> B-BOOST -> IMPACT -> EXCITE -> CUSTOMRotate the [CONTROL] knob to changes CUSTOM, and press the [CONTROL] knob, the press [CONTROL] knob (right/left)to select it including: BASS-G -> BASS-F -> BASS-Q -> MID-G -> MID-F -> MID-Q -> TREBLE-G -> TREBLE-F, rotate the [CONTROL] knob to select a value.BASS-G / MID-G / TREBLE-G: (-7)- (+7)BASS-F: 50 / 100 / 200BASS-Q / TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0MID-F: 500 / 1K / 2K MID-Q: 0.7 / 1.0 / 1.4 / 2.0TREBLE-F: 5K / 10K / 15KThen press [CONTROL] knob (left / right) to select USER preset including:BALANCE -> FADER -> M-B EX ->HPF(high pass fillter) -> LPF(low pass filter) -> S-W VOL (Subwoofer Volume), rotate the [CONTROL] knob to select a value.BALANCE:LEFT 1-7->CENTER->RIGHT 1-7FADER:FRONT 1-7->CENTER->REAR 1-7M-B EX: ON/OFFHPF: THROUGH/60/90/120LPF: THROUGH/60/90/120SUBW VOL: (-6)-(+6)About HD Radio™ technologyHD Radio technology allows CD-quality digital broadcasting of your local AM and FM radio stations. HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting. With multicasting, you can receive up to eight additional multicast channels: HD1~HD8. With an HD Radio tuner connected, you will receive HD Radio digital broadcasts automatically when tuned to a station that offers HD Radio technology. NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting. You can receive both analog and digital stations with the unit.Accessing radio modePress the [CONTROL] knob or [SRC] button on the remote control to switch to the HD RADIO source, and HD icon will illuminate.Select a bandPress and hold the [CONTROL] knob (up 2sec.) on the panel or [BAND/TOP] button on the remote control to change between three FM and one AM bands. Each band stores up to six preset stations.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-11.png)
![11EnglishHD Radio OperationsTuning- Seek TuningPress and hold the [CONTROL] knob (left / right) on the panel or [ , ] buttons on the remote control to seek the next/previous station automatically. - Manual TuningPress the [CONTROL] knob (left / right) on the panel or [ , ] buttons on the remote control to move the radio frequency number up or down one step.HD Radio multicast channelsTo tune to an HD Radio multicast channel, tune to the main signal and then press the [CONTROL] knob on the panel. PTY and SUB CH are displayed. Select PTY or SUB CH by rotate [CONTROL] knob and push to conrm.• Select PTY type from the category list by rotate [CONTROL] knob and push.• Select SUB CH by rotate [CONTROL] knob and push.• Multi channel is available when a digital signal is detected, the DIGITAL icon will illuminate. If the digital signal becomes unavailable, the unit will revert to Analog reception.Preset stationsUp to six stations on each band can be stored as presets, which can then be instantly recalled by pressing the associated preset button. To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for presets on the other four bands.NOTE: Multicast stations can be stored as presets, but the unit must be in Digital or Auto reception mode to receive them.Preset scanPress [SCN/PS/AS] button on the remote control to scan and play all preset stations for 10 seconds each. Press [SCN/PS/AS] button on the remote control again to stop scanning and play the current station.Automatic store (AS)Press the [CONTROL] knob (down 2 sec.) or [SCN/PS/AS] button on the remote control to select six strong stations and store them in the FM3 or AM band using the Auto Store feature. After entering the stations into memory, the unit will automatically stop at each station for ve seconds, allowing you to preview each selection. When using the Auto Store feature, the new stations replace any stations already stored in preset memory.Note:You can stop the Auto Store function at any time by pressing the [CONTROL] knob (down 2 sec.) or [SCN/PS/AS] button on the remote control again.Satellite Radio ModeListeners can subscribe to SIRIUS® Radio on the Web by visiting www.sirius.com, or by calling (888) 539-SIRIUS. Customers should have their SIRIUS ID ready (SIRIUS ID is located on the SCC1: SIRIUS Connect Vehicle Tuner, solid separately). Customers can listen to music samples by tuning to channel 184.Accessing satellite radio modePress the [CONTROL] knob or [SRC] button on the remote control to switch to the SAT source. Displaying the Identication (ID) CodeBefore you listen to satellite radio, you must](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-12.png)
![English12The unit offers iTunes® Tagging, which allows the user to "Tag" songs playing on HD Radio™ stations for purchase later through iTunes. When press ISR button, the unit stores the title and artist song information that can then be transferred to your iPod when connected to the unit. A list titled "Tagged" will appear in iTunes, allowing you the option to purchase your tagged songs.Note:“iTunes® Tagging” function works by connecting THD301 (sold separately).iPod compatibilityFor detailed information on the playable iPod models, see our home page: www.clarion.comiTunes® TaggingSatellite Radio Modesubscribe to the service using your radio’s identification number. To display the radio ID, use the [CONTROL] knob (left) or [ ] tuning button on the remote control to tune to channel “000”. The screen displays the radio ID where the channel name is usually displayed.Check SCC1-SIRIUS Connect Vehicle TUNERIf SIRIUS tuner is not connected, “NO TUNER” will appear on the LCD.Select a bandPress the the [CONTROL] knob (up 2sec.) on the panel or [BAND/TOP] button on the remote control to change between three SAT bands (SR1, SR2 and SR3). Each band stores up to six preset stations.Select a stationPress the [CONTROL] knob (left / right) on the panel or [ , ] buttons on the remote control to tune to another station. Preset modeSix numbered preset buttons store and recall stations for each band. Preset scanShort press the [SCN/PS/AS] button on the remote control to start category scanning.Long press the [SCN/PS/AS] button (1 sec.) on the remote control to start preset station scanning for 10 seconds each.Storing a station1. Select a band (if needed), then select a station.2. Press and hold a preset button (numbers 1-6) on the remote control.3. The preset number and station is displayed and highlighted.Recalling a station1. Select a band (if needed).2. Press a remote control preset button (numbers 1-6) to select the corresponding stored station.Category and Channel searchTo access Category and Channel Search mode, press the [CONTROL] knob (up 2sec.) on the panel or [BAND/TOP] button on the remote control more than 1 second. 1. Rotate the rotary knob on the panel to select the desired category.2. Press the [CONTROL] knob (left / right) on the panel or [ , ] buttons to select the channel name.Direct searchTo access Direct Search mode, press the [CONTROL] knob button on the front panel. 1. Rotate the rotary knob on the panel to select the desired direct, and press the [CONTROL] knob to conrm the selection. 2. Rotate the rotary knob on the panel or press the [ ] or [ ] button on the remote control to select the direct name, and press the knob to conrm the selection.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-13.png)
![13EnglishiTunes® TaggingNote:• iPhones can also be connected to this system and “iPod” appearing in this manual should be referred to as “iPod/iPhone”.• This system will not operate or may operate improperly with unsupported versions.Tagging musicTo begin tagging music, tune to an HD Radio station. The DIGITAL icon at the display must be illuminated, indicating a digital station is being received. TAG icon lights up when Tagging function is ready. Press the [ISR] button on the remote control. The tagging function is highly depends on the receptions of the radio station. If the channel reception is insufcient, it will effect the operation of the tagging function.“Stored Tag ## of 64” will appear in the display. The song information is saved to the unit memory until an iPod is connected. You can tag up to 64 songs before the tags must be transferred to an iPod or deleted. When the Tag memory reaches capacity (64 tags) the bottom of the screen displays “Memory Full”.Table 5: TAG MessagesTag Message ReasonST O RE D T A G # # OF 64If the Tag data is ready, and [ISR] button on the remote control is pressedSENDING TAG ## Tag data is sending to iPodMEMORY FULL Tag storage is fullDEFICIENT TAG DATATag data is not availableIPOD FULL iPod memory is fullTAG NOT SUPPORT When connect and press [ISR] button on the remote control, the iPod without Tagging functionNote:Tags saved to your iPod can be managed using the iTunes software, available at www.apple.com/itunes.Downloading tags to your iPodTo download tags to your iPod, plug an iPod into the unit. All existing tags are automatically transferred to the iPod and deleted from the head unit’s memory. If an iPod is connected when a song is tagged, the Tag will be immediately transferred to the iPod.Note:When transferring Tags to an iPod, the unit must remain in RADIO mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the “Tagged” list on the left side of the iTunes software screen. Click the “view” button for purchasing information.Note:1. How to enter the iTunes tagging function? “TAG” and “DIGITAL” light up when Tagging function is ready, press [ISR] button on the remote control to start iTunes Tagging.2. What is seen on the radio’s display to let me know I have tagged the tune? Press [ISR] button on the remote control to show “STORED TAG ## OF 64”. After connect to a iPod, the display shows “SENDING TAG ##”. If no connection, the display will show “STORED TAG ## OF 64”. You could save 64 Tag into E2PROM in total. When you connect to a iPod, Tag information will be saved in the iPod, and the data in E2PROM will be cleared.3. Then how do I get the tagged tune from my iPod to the computer? If you have install iTunes, connect your iPod to your computer and buy songs online.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-14.png)
![English141. Push the cover of the USB connector to the right. Insert a USB cable (CCA-755) into the USB connector. Insert a USB device into the USB cable. When connecting a USB device, the unit will read the les automatically.2. To remove the USB device, you should rst select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. Push the cover to the left.3. Operation is same as MP3/WMA operation.USB OperationsiPod & iPhone OperationsConnectConnect an iPod or iPhone to the USB connector via CCA-748 cable.When connecting a device, the unit will read the files automatically. The track information display on the screen once playback start.MENUIn the S-CTRL OFF mode, press the [CONTROL] knob (up), rotate the knob select “MUSIC” or “VIDEO”.Select “MUSIC”, press the [CONTROL] knob, then rotate the [CONTROL] knob to show PLAY LISTS / ARTISTS / ALBUMS / GENRES / SONGS / COMPOSERS, then press the [VOLUME] knob to conrm. Select “VIDEO”, press the [CONTROL] knob, then rotate the [CONTROL] knob to show MOVIES MUSIC VIDEO TV SGIWS VIDEO PODCASTS RENTALS, then press the [CONTROL] knob to conrm. NOTE:VIDEO MENU item is different by the model of connected iPod and language setting.Repeat playThis function allows you to play the current track repeatedly or play all tracks in your iPod/iPhone repeatedly.1. Press the [AF/RPT] button on the remote control once or more until “RPT ON” appears on the LCD to perform repeat play.2. Press [AF/RPT] button on the remote control repeatedly until “RPT OFF” appears on the LCD to cancel repeat playback. Random playThis function allows you to play all tracks in a random order.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-15.png)
![15EnglishPress the [CONTROL] knob on the panel or [SRC] button on the remote control once or more to select “AUX”.AUX is just for Audio content with 3.5mm Jack connector plugged into audio-in socket on the front panel on the right of USB connector.AUX Input sensitivity setting1. Press and hold the [CONTROL] knob (2 sec.).AUX OperationsiPod & iPhone Operations1. Press the [PTY/RDM] button on the remote control once or more until “ALBUM RDM” appears on the LCD for album random play.2. Press the [PTY/RDM] button on the remote control once or more until “SONG RDM” appears on the LCD to perform random play.3. Press the [PTY/RDM] button on the remote control once or more until “RDM OFF” appears on the LCD to cancel random playback. Setting iPod simple control modeUse this function if you wish to operate through your iPod connected to this unit via the USB cable.* The factory default setting is “ OFF “.1. press and hold [CONTROL] knob (2sec.), and rotate the [CONTROL] knob choose ADJUST, then press the [CONTROL] knob to enter system setup. 2 Press the [CONTROL] knob (left / right) to select “ S-CTRL“. 3. Rotate the [CONTROL] knob to SELECT “ ON “ or “ OFF “ . • ON: Operations are made through your iPod. • OFF: Operations cannot be made through your iPod.Notes:• When performing iPod operations using simple control mode, make the operations slowly. If repetitive operations are performed too quickly, unforeseen errors may occur.• When performing iPod operations using simple control mode, please do not operate the iPod and the unit at the same time, otherwise there may be unexpected event happened.• Some iPod models do not support this function. Consult your nearest Clarion dealer or website to conrm which models do not support this function. iPod menu alphabet searchThis function searches the subfolders for desired alphabetical letters.1. Press the [CONTROL] knob, and rotate [CONTROL] knob to select the iPod menu mode.2. Rotate the [CONTROL] knob to switch between categories. MUSIC: PLAYLISTS, ARTISTS, ALBUMS, GENRES, SONGS, COMPOSERS VIDEO: MOVIES, MUSIC VIDEOS, TV SHOWS VIDEO PODCASTS, RENTALS3. Press the [CONTROL] knob. (The contents of the category are displayed.)4. Press and hold the [CONTROL] knob (2 sec.).5. Rotate the [CONTROL] knob to select the desired letter to search.6. Press the [CONTROL] knob to perform search.2. Turn the [CONTROL] knob to select “AUX SENS”.3. If the output level of connected external audio player is “HIGH”, rotate the [CONTROL] knob and choose “LOW”. And if the output level is “LOW”,choose “HIGH”.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-16.png)
![English16Bluetooth OperationsThe Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music.Note:• Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction.• If leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction.• This system will not operate or may operate improperly with some Bluetooth audio players.• Clarion cannot guarantee the compatibility of all mobile phones together with unit.• Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call.Handsfree Operations Pairing1. Turn on Bluetooth function of your mobile phone.2. Enter mobile phone’s Bluetooth setup menu.3. Search for new Bluetooth devices.4. Select FZ501 from the pairing list on the mobile phone.5. Enter “0000” as the password (The password default setting is “ 0000 ”).6. After pairing successfully, the unit will enter Bluetooth mode automatically, and “BLUETOOTH CONNECTED” will appear on the LCD.Making a callOperation from Bluetooth menuPress the [CONTROL] knob to switch the source to “BLUETOOTH”. • Dial NumberPress the [CONTROL] knob (up),rotate the [CONTROL] knob select DIAL NUM.1. Press the [CONTROL] knob.2. Rotate the [CONTROL] knob on the front panel to switch: DIAL NUMBER / DIALLED CALL / MISSED CALL / RECEIVED CALL / MEMORY PHONEBOOK / SIM PHONEBOOK 3. Press the [CONTROL] knob to conrm the selection, “WAITING” will appear on the LCD.4. Press the [CONTROL] knob to dial.5. Press the [CONTROL] knob (right) to terminate call.• Dialled/Missed/ Received Call HistoryYou can search any Dialled/Missed/Received Call History.1. Rotate the knob to select “DIAL NUMBER”, “MISSED CALL” or “RECEIVED CALL”.2. Press the knob to enter the selected call history.3. Rotate the [CONTROL] knob to scroll the contacts.4. When the contact name or mobile phone No. is displayed, press the [CONTROL] knob to call the mobile phone No. of that contact. * Press the [CONTROL] knob (right) to end the call.• Call from PhonebookUser can search the contact name in the phonebook and make call.1. Rotate the [CONTROL] knob to select “SIM PHONE BOOK”or “MEMORY PHONE BOOK“ .2. Press the [CONTROL] knob to enter the selected phonebook.3. Rotate the [CONTROL] knob to scroll the contacts.4. When the contact name is displayed, press the [CONTROL] knob to call the mobile phone No. of that contact.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-17.png)
![17English * Press the [CONTROL] knob (right) to end the call.• Answering a callYou can answer an incoming call by pressing the [CONTROL] knob.* Press the [CONTROL] knob (right) to reject an incoming call.Audio Streaming OperationsWhat is audio streaming?Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the car’s speakers. Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered.CAUTIONPlease avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback.Audio streaming may or may not resume af t er t ele p hon e int e rru p t as t his is dependent on mobile phone.System will always return to Radio mode if audio streaming is disconnected.Note:Be sure to read the chapter “Pairing before proceeding.Play / Pause a track1. Push the [CONTROL] knob (down) to pause audio playback.2. To resume audio playback, push the [CONTROL] knob (down) again.Bluetooth OperationsSelecting a trackTrack-up1. Press the [CONTROL] knob (right) to move to the beginning of the next track.2. Each time the [CONTROL] knob (right) is pressed, playback proceeds to another track in the advancing direction.Track-down1. Press the [CONTROL] knob (left) to move the to beginning of the previous track.2. Each time the [CONTROL] knob (left) is pressed, playback proceeds to previous track in the reverse direction.Note:Playing order will depend on Bluetooth audio player. When [CONTROL] knob (left) is pressed, some A2DP devices will restart the current track depends on the duration of playback.During music streaming playback, “A2DP” will be shown on the display. Information about tracks (e.g. the elapsed playtime, songtitle, etc.) cannot be displayed on this unit. When A2DP device is disconnected, “BT DISCONNECT” will be shown on the displayand return to previously selected audio source. Some Bluetooth® audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play / pause status in BT MUSIC mode.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-18.png)
![English186. TROUBLE SHOOTINGGENERALProblem Cause MeasureUnit can not power on.Unit fuse blown. Replace with new fuse of correct rating.Car battery fuse blown. Replace with new fuse of correct rating.Unit can not power on.Nothing happens when buttons are pressed.Display is not accurate.The microprocessor has malfunctioned due to noise, etc.Turn o the power.Press the [RESET] button with a thin rod.Note:When the [RESET] button is pressed, turn othe ACC power.** When the [RESET] button is pressed,frequencies of radio stations, titles, etc. stored in memory are cleared..No/low audio output.Improper audio output connection. Check wiring and correct.Volume set too low. Increase volume level.Speakers damaged. Replace speakers.Heavily biased volume balance. Adjust the channel balance to center position.Speaker wiring is in contact with metal part of car. Insulate all speaker wiring connections.Poor sound quality or distortion.Speaker power rating does not match unit. Replace speakers.Wrong connections. Check wiring and correct.Speaker is shorted. Check wiring and correct.Tel-Mute malfunction MUTE wire is grounded. Check the MUTE wiring and correct.Unit resets itself when engine is o.Incorrect connection between ACC and Battery. Check wiring and correct.](https://usermanual.wiki/Faurecia-Clarion-Electronics/FZ501/User-Guide-1370723-Page-19.png)
