Faurecia Clarion Electronics M303 CAR DVD PLAYER User Manual M303 manual Enghish 20121225 indd
Clarion Co Ltd CAR DVD PLAYER M303 manual Enghish 20121225 indd
UserManual.wiki
>
Faurecia Clarion Electronics
>
M303 User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![English4USB Port• The USB memory sticks must be recognized as “USB mass storage class” to work properly. Some models may not operate correctly. When the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage. When using an USB memory stick, we recommend that you backup your data stored on it before using a personal computer etc.• Data fi les may be broken when using USB memory sticks in the following situation: When disconnecting the USB memory stick or turning the power off during reading data. When affected by static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed.• Connecting with the computer is not covered.Front Panel / GeneralitiesFor a longer service life, be sure to read the following cautions.• Do not allow any liquids on the unit from drinks, umbrellas, etc. Doing so may damage the internal circuitry.• Do not disassemble or modify the unit in any way. Doing so may result in damage.• Do not let cigarettes burn the display. Doing so may damage or deform the body.• If a problem should occur, have the unit inspected at your store of purchase.• The remote control unit may not work if the remote control sensor is exposed to direct sunlight.Remove the DCPThe control panel can be detached to prevent theft. When detaching the control panel, keep it in the safety place and prevent scratches.We recommend taking the DCP (DETACHABLE CONTROL PANEL) with you when leaving the boat.1. Press the [SRC / ] button (1 sec.) to turn off the power.2. Deeply push in [OPEN] button to unlock the DCP.3. Hold the side popped out, remove the DCP.Attach the DCP1. Hold the DCP and ensure that the panel faces towards you. Set the right side of the DCP into the DCP bracket. 2. Press the left side of the DCP until it locks.INFORMATION FOR USERS:Changes or modifications to this product unapproved by the manufacturer will void the warranty and will violate FCC approval.Cleaning the body• Use a soft, dry cloth and gently wipe off any dirt or dust. • For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. • Do not use benzene, thinner, boat cleaner, etc., as these substances may damage the body or cause the paint to peel. Also, leaving rubber or plastic products in contact with the body for long periods of time may cause stains.Hold the DCP, as shown in the fi gure below, and put it into the supplied DCP case. Storing the DCP in the DCP CaseCAUTION• The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or subject it to strong shocks.• Once the [OPEN] button is pressed and DCP is unlocked, vibrations can cause the DCP to fall.• The connector for the main unit and DCP is extremely important. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.Note:If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.DCP caseDCP P/N:12707100xxxxFCC ID: AX2M303IC: 419C-M303Bluetooth QD ID No.: B017789TX-1141B-A](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-5.png)
![English53. CONTROLSOperational Panel[ SRC / ] Button• Power / Toggle the audio source[BAND / ] Button• RADIO mode – Select tuner band• BT mode – Dial / Answer / Transfer call / Redial (long press)• SiriusXM mode – Select tuner band / Select category (long press)[MENU / ] Button• MP3/WMA mode – Search function.• CD mode – No function.• RADIO mode – No function.• AUX mode – No function.• USB mode – Search function• iPod mode – iPod menu• Pandora mode – Station select• BT mode – Terminate call• SiriusXM mode – Replay mode / Direct select, Alert list, MyMusic list (long press) [ ] Button• Press to eject disc.[ , ] Buttons• Previous / next track• Search (long press)• Pandora mode – Station up-down / skip track ([ ] long press)[Open] Button• Unlock the front panel.[PS / AS] Button• Scan play / Preset scan • Auto memory store (long press)• SiriusXM mode – Channel scan (in current category) / Preset scan (long press)[ ] Button• Sound effect setting[VOLUME] Knob • Adjust volume level / Confi rm (press) • Pandora mode – Bookmark track / Artist-(long press) • SiriusXM mode – Add Artist Alert / Add Song Alert (long press)Names of ButtonsNames of ButtonsNotes for use of Optional Remote ControlInserting the Battery1. Slide remote control unit’s rear cover in the direction shown.2. Insert battery (CR2025) into insertion guides with printed side (+) up.3. Press battery into compartment as shown.4. Replace and slide cover until it clicks into place.1. Aim the remote control at the remote sensor on the unit.2. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer.3. DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly.4. Use “button shaped” lithium battery “CR2025” (3V) only.5. DO NOT subject battery to recharge, disassemble, heat or dispose in fire or water.6. Insert the battery in proper direction according to the (+) and (-) polarities.7. Store the battery in a place where children cannot reach to avoid the risk of accident.Insertion guide[ SRC / ] [DISP] [ISR] Disc Slot[ / ][1~6][ ][OPEN] [VOLUME][PS/AS][MIC][BAND / ] [MENU / ][ISR] Button • Recall ISR station stored in memory and store current station in ISR memory (long press) • iTunes Tagging (When connected with SiriusXM-Connect™ Vehicle Tuner and displayed “TAG” on display at SiriusXM - mode.)[1~6] Buttons • [1] Button: Scan play / Preset station 1 / Pandora mode - Create new station by Artist / by Track (long press) • [2] Button: Repeat play / Preset station 2. • [3] Button: Random play / Preset station 3. • [4] Button: Play / Pause / Top play (long press) / Preset station 4. • [5] Button: Previous folder / Preset station 5. 10 tracks down (long press Thumbs down(Pandora mode) • [6] Button: Next folder / Preset station 6. 10 tracks up (long press) / Thumbs up (Pandora mode)[DISP] Button• Display switch • System setup (long press)[ MIC ] Hole• Internal microphone](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-6.png)
![English6Remote Control (RCX001: Sold separately)[SRC / ] Button• Toggle the audio source• Power on / Power off (long press)[ , ] Buttons• Preset station up / down• Previous / next track• Search (long press)• Pandora mode – Station up-down / skip track ([ ] long press)[SCN/PS/AS] Button• Scan play / Preset scan• Auto memory store (long press)• Pandora mode – Thumbs down• SiriusXM mode– Channel scan (in current category) / Preset scan (long press)[BAND/TOP] Button• CD/MP3/WMA/USB mode – Top play (long press)• RADIO mode – Select tuner band• SiriusXM mode – Select tuner band, quit Replay (Replay mode) / Select category (long press)[ , ] Buttons• Volume up / down[ ] Button• Play / Pause• SirusXM mode – Replay mode[ISR] Button• Recall ISR station stored in memory and store current station in ISR memory (long press)• iTunes Tagging (When connected with SiriusXM Vehicle Tuner and displayed “TAG” on display at SiriusXM - mode.)[DISP] Button• Display switch[RDM] Button• Random play• Pandora mode – Thumbs up[RPT] Button• Repeat play• Pandora mode – Bookmark track / Artist (long press)[MUTE] Button• Mute the volume[ , ][ ][DISP][ISR][RDM][RPT][ , ][MUTE][SCN/PS/AS][SRC / ] [BAND/TOP]Optional Wired Remote Control Unit OperationsFollowing operations are enabled by remote control with the separately sold Wired Remote Control Unit MW1 (shown below) or MW4.Note:If the remote control is connected with this unit while the power on, please restart this unit again to confi rm the normal display.[MENU/BAND][ENTER][ [ /SOURCE]][ ], [ ][ ][ ][ ], [ ]IR-Receiver[ /SOURCE] button• Press the [ /SOURCE] button to turn the power on and press and hold it (1 sec.) to turn the power off.• Each time the [ /SOURCE] button is pressed, the mode switches.Note:• If the above equipment is not connected, corresponding mode cannot be selected.[ENTER] button• ALL mode – Answer (incoming) / Transfer call (During talking -> press)• RADIO mode – No function• USB mode – Confi rm (in Menu mode)• iPod mode – Confi rm (in Menu mode)• AUX mode – No function• Pandora mode – Bookmark track / Artist (long press) / Confi rm (in Menu mode)• SiriusXM mode – Jump to Alert ch / Confi rm ch (in Search mode)• BT mode – Answer (incoming) / Call (from CALL LIST) / Transfer call (During talking -> press)[ ], [ ] buttons• Press the [ ] button to increase the volume.• Press the [ ] button to decrease the volume.[ ], [ ] buttons• RADIO mode – Station up - down /Seek up - down (long press)• USB mode – Previous - next track / Fast forward-reverse (long press) • iPod mode – Previous - next track / Fast forward-reverse (long press) • AUX mode – No functionCAUTIONLower the volume level before powering the source unit off. The source unit stores the last volume setting.WARNINGEXPOSING THE UNIT TO WATER WITH THE FRONT PANEL OPEN WILL CAUSE DAMAGE OR UNIT MALFUNCTION!](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-7.png)
![English7Handling DiscsHandling• New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.• Never stick labels on the surface of the disc or mark the surface with a pencil or pen.• Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the player or it may damage the player.• Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.• To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.• Do not use commercially available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.Storage• Do not expose discs to direct sunlight or any heat source.• Do not expose discs to excess humidity or dust.• Do not expose discs to direct heat from heaters.Cleaning• To remove fi ngermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the circumference.• Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs.• After using special disc cleaner, let the disc dry off well before playing it.On Discs• Never turn off the power and remove the unit from the boat with a disc loaded.CAUTIONFor your safety, the driver should not insert or eject a disc while driving.Ball-point pen Roughness4. CAUTIONS ON HANDLINGOptional Wired Remote Control Unit Operations• Pandora mode – Station up - down / skip track ( : Long press)• SiriusXM mode – Station up - down / Station fast up-down – (Long press) / Move cursor (direct mode)• BT(A2DP) mode – Previous - next track / Fast forward - reverse (long press)• BT(HFP) mode – Select list (in CALL LIST) / Answer ( : incoming) / Terminal call ( ) / Transfer call (During talking -> : press)• Press the [ ] or [ ] button to tune in a station for seek tuning or manual tuning (Radio mode / Satellite mode only).[ ], [ ] buttons• RADIO mode – Preset station up / down• USB mode – Select (in Folder search mode)• iPod mode – Select (in Menu mode)• AUX mode – No function• Pandora mode – Thumbs up ( ) / Thumbs down( ) / Select Serch mode / Select station (in Search mode) • SiriusXM mode – Preset channel up-down / Category up-down (in Category mode) / Numeric up-down (Direct mode)• BT mode – Redial (Press -> “ENT”) / Select CALL LIST (in Menu mode)[MENU/BAND] button• Each time the button is pressed, the band switches in the following order: Radio : FM1 -> FM2 -> FM3 -> AM -> FM1..... SiriusXM mode - SXM1 -> SXM2 -> SXM3 -> SXM1• Press and hold the button to enter the Category browsing, Direct Select, Alert List or My Music List mode (SiriusXM mode). During SiriusXM Replay mode - Exit from Replay mode. • Press and hold the button, it will start from the first track. (in CD/MP3/WMA and USB modes)• Press the [MENU] button to enter the list search mode. (in CD/MP3/WMA and USB modes)[ ] button• RADIO mode – Mute ON-OFF• USB mode – Play-Pause• iPod mode – Play-Pause• AUX mode – No function• Pandora mode – Play-Pause• SiriusXM mode – Replay mode / Play/ Pause (in Instant replay mode)• BT(A2DP) mode – Play-Pause• BT(HFP) mode – No functionIR-Receiver• Receiver for optional IR remote control unit. (Operating range: 30° in all directions)](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-8.png)
![English85. OPERATIONSBasic OperationsNote:• Refer to the diagrams in “3. CONTROLS” when reading this chapter.CAUTIONWhen the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.Power on / offNotes:• Start the engine before using this unit.• Be careful about using this unit for a long time without running the engine. If you drain the battery too far, you may not be able to start the engine and this can reduce the service life of the battery.1. Start the engine. The power button / knob illumination on the unit will light up.Engine ON position2. Press the [SRC / ] button on the front panel or the remote control to turn on the power under standby mode. The unit goes back to the last status after power on.3. Press and hold the [SRC / ] button on the front panel or the remote control to turn off the power.MutePress the [MUTE] button on the remote control to mute the volume from the unit.Note: Doing the operation above again or adjusting volume will release muting.Volume adjustmentRotate the [VOLUME] knob on the front panel or press the [ ] or [ ] button on the remote control.The adjustable range of volume is 0 to 40.CAUTIONWhile driving, keep the volume level at which external sounds can still be heard.Playing source selectionPress [SRC / ] button on the front panel or remote control repeatedly to choose desired playing source.Note:Playing source selection means selecting which mode, such as DISC mode, RADIO mode and AUX mode.Display system timePress the [DISP] button on the front panel or remote control to switch the display information from clock, station information (radio mode), or track information (CD mode).RESETIf you have following problems, please press [RESET] button.• Unit can not power on• Nothing happens when buttons are pressed• Display is not accurateNote:* When the [RESET] button is pressed, preset radio stations, audio setting, etc.stored in memory are retained. RESETSystem SetupDELETE (BT mode)1. Rotate the [VOLUME] knob to choose the paired mobile phone name from the pairing list.2. Press and hold the [VOLUME] knob to confi rm. DISCONNECT (BT mode)Disconnect currently connected mobile phone.1. Rotate the [VOLUME] knob, mobile phone displays are currently connected.2. Press and hold the [VOLUME] knob to disconnect.MIC GAIN (BT mode)Rotate the [VOLUME] knob to choose Mic gain: -5,-4,-3,-2,-1,0,1, 2, 3, 4, 5.You can change the gain of MIC when a telephone partner cannot hear your voice.MIC SEL (BT mode)Rotate the [VOLUME] knob to choose Microphone EXTERNAL or INTERNAL.TONE SEL (BT mode)You can get mobile phone ring tone from the speaker.Rotate the [VOLUME] knob to choose AUTO or INTERNAL.• AUTO: Mobile phone ring tone from the speaker.• INTERNAL: The unit original ring tone from the speaker.AUTO ANS (BT mode)To answer incoming calls automatically.Rotate the [VOLUME] knob to choose AUTO ANS ON or OFF.AUTO CON: ON/OFF (BT mode)Automatically connects the mobile phone was last connected.Rotate the [VOLUME] knob to choose AUTO CON ON or OFF.PIN CODE Rotate and press the [VOLUME] knob to choose a 4-digit password. Press the [VOLUME] knob more than 1 seconds to confi rm.The PIN CODE default setting is “ 0000 ”.SCRN SVR: ON/OFFRotate the [VOLUME] knob to choose SCRN SVR (screen saver) ON or OFF.In any mode, press and hold [DISP] button to enter system setup. Press [ ] or [ ] button to select options, rotate the [VOLUME] knob to adjust.CLOCKPress the [VOLUME] knob to enter clock setting mode, rotate the [VOLUME] knob to set clock, press [ ] or [ ] button to select hour or minute, press and hold the [VOLUME] knob to confi rm.DX/LO (RADIO mode)Rotate the [VOLUME] knob to choose radio local or distant at RADIO mode.• LO: Only stations with strong signal can be received.• DX: Stations with strong and weak signals can be received.AUX SENS (AUX mode)Rotate the [VOLUME] knob to choose AUX Input sensitivity LOW, MID or HIGH at AUX mode.PARENTAL PASSWORD (SiriusXM mode)Change parental password. Original code is “0000”LOCK CH (SiriusXM mode)Lock the current channelUNLOCK CH (SiriusXM mode)Unlock current locked channel.UNLOCK ALL CH (SiriusXM mode)Unlock all parental locked channels.ALERT: ON/OFF (SiriusXM mode)Activate interruption by Artist and Song alertDELETE ALL ALERT (SiriusXM mode)Delete saved alert items for artist and song.SELECT (BT mode)This “SELECT” menu is intended to automatically paired by selecting a mobile phone was stored.This unit can store three mobile phones. The mobile phone will be stored in paired order to the unit. The fourth mobile phone can not be stored. If you want to store a fourth mobile phone, please delete unwanted mobile phone from “DELETE” menu.1. Rotate the [VOLUME] knob to choose the paired mobile phone name from the pairing list.2. Press and hold the [VOLUME] knob to confi rm.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-9.png)
![English9System SetupPress the [ ] button to enter sound effect setting mode. First press shows current EQ. Rotate the [VOLUME] knob to changes BEAT EQ in this order:OFF -> B-BOOST -> IMPACT -> EXCITE -> CUSTOMRotate the [VOLUME] knob to changes CUSTOM, and press the [VOLUME] knob, the press [ ] or [ ] button to select it including: BAS-G -> BAS-F -> BAS-Q -> MID-G -> MID-F -> MID-Q -> TRE-G -> TRE-F, rotate the [VOLUME] knob to select a value.BAS-G / MID-G / TRE-G: (-7)- (+7)BAS-F: 50 / 100 / 200BAS-Q: 0.7 / 1.0 / 1.4 / 2.0MID-F: 500 /1K / 2KMID-Q: 0.7 / 1.0 / 1.4 / 2.0Audio SetupTRE-F: 5k / 10k / 15kTRE-Q: 0.7 / 1.0 / 1.4 / 2.0Press the [ ] button, then press [ ] or [ ] button to select USER preset including:BALANCE -> FADER -> M-B EX -> HPF (high pass fi lter) -> LPF (low pass fi lter) -> SUBW VOL (Subwoofer Volume), rotate the [VOLUME] knob to select a value.BALANCE: LEFT 1-7 -> CENTER -> RIGHT 1-7FADER: FRONT 1-7 -> CENTER -> REAR 1-7M-BEX: ON / OFFHPF: THROUGH / 60 / 90 / 120LPF: THROUGH / 60 / 90 / 120SUBW VOL: (-6) - (+6)SCROLL: ON/OFFFor track information that is longer than the display panel:When SCOLL is ON, the LCD will scroll the ID3 TAG information across the display, e.g.: TRACK->FOLDER->FILE->ALBUM->TITLE->ARTIST->TRACK->...When SCROLL is OFF, the LCD will display one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by press [DISP] button.S-CTRL (iPod mode) : ON/OFFRotate the [VOLUME] knob to choose S-CTRL (Simple control) ON or OFF.* Refer to Page 12.Pandora: ON/OFFSelect OFF if the Pandora application has not been installed on your iPod touch or iPhone.DIMMER: ON/OFFRotate the [VOLUME] knob to choose DIMMER ON or OFF.• ON: LCD dimmer is active when small light of vehicle is turned ON.• OFF: LCD always maximum brightness regardless of the vehicle small light.REAR/S-WRotate the [VOLUME] knob to choose REAR or S-WOOFER (SUB-WOOFER).SW PHASERotate the [VOLUME] knob to choose SUBWOOFER phase REVERSE or NORMAL.TEL-SWRotate the [VOLUME] knob to choose MUTE, ON or OFF. • MUTE: The sound from this unit is muted during telephone calls. • OFF: This unit continues normal operation even when the cellular phone is used. • ON: You can listen to your telephone calls from the speakers connected to this unit. * When listening to your calls on your boat speakers, you can adjust the volume by turning the [VOLUME] knob. BEEP: ON/OFFRotate the [VOLUME] knob to choose button beep sound ON or OFF.12/24HRotate the [VOLUME] knob to choose time format: 12 or 24 hours.RESETLong press [ ENTER ] button. Settings will be set to the default value.TUNE AREARotate the [VOLUME] knob to choose U, K or E. • U: U.S. standard (initial setting) • K: Other countries • E: Europe standardSelect tuner as playing sourcePress [SRC / ] button once or more to enter RADIO mode.Changing the reception areaThis unit is initially set to USA frequency intervals of 10 kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.U.S. standardOther countriesEurope standardAMFrequency spacing 10 kHz 9 kHz 9 kHzFrequency range530 to 1,710 kHz531 to 1,629kHz531 to 1,602 kHzFMFrequency spacing 200kHz 50kHz 50kHzFrequency range87.9 to 107.9MHz87.5 to 108 MHz87.5 to 108 MHzSetting the reception area* All station preset memories are lost when the reception area is changed.1. Press and hold the [DISP] button.2. Press the [ ] or [ ] button to select “TUN AREA”3. Rotate the [VOLUME] knob to select: • U: U.S. standard (initial setting) • K: Other countries • E: Europe standard4. Press and hold the [VOLUME] knob to store the selecting. • The unit will turn off after setting.Selecting the radio bandPress the [BAND / ] button on the panel or on the remote control to select one radio band among FM1, FM2, FM3, AM.Manual tuningDuring manual tuning, the frequency will be changed in steps.Press the [ ] or [ ] button on the panel to tune in a lower / higher station.Press the [ ] or [ ] button on the remote control to select preset stations.Auto tuningPress and hold the [ ] or [ ] button to seek a lower / higher station.To stop searching, repeat the operation above or press other buttons having radio functions.Note:When a station is received, searching stops and the station is played.Radio OperationsPreset scanPreset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.1. Press the [PS/AS] button.2. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station.Note: Be careful not to press and hold the [PS/AS] button for 1 second or longer, otherwise the auto store function will begin and the unit starts storing stations.Auto storeOnly stations with suffi cient signal strength will be detected and stored in the memory.Press and hold the [PS/AS] button (1 sec.) to start automatic station search.To stop auto store, press other buttons having radio functions.Notes:1. After auto store, the previous stored stations will be overwritten.2. The unit has 4 bands, such as FM1, FM2, FM3 and AM. FM3 and AM can store by AS function. Each band can store 6 stations, M303 can store 24 stations in total.Manual storeWhen one expected radio station has been detected, press and hold number button 1-6 to store it in the memory.Recall the stored stationsPress one numeric button among 1 to 6 on the panel to select the corresponding stored station.Local seekingWhen LOCAL seeking is ON, only those radio stations with strong radio signal could be received.To select LOCAL function, press and hold the [ DISP ] button on the front panel, then press [ ] button repeatedly until LO or DX displays on the screen, and rotate the [VOLUME] knob to select Local or Distant mode.Note:The number of radio stations that can be received will decrease after the local seeking mode is ON.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-10.png)
![English10SiriusXM Satallite Radio Operations SiriusXM Satallite Radio OperationsEverything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. To start listening to the SiriusXM™ Satellite Radio, A SiriusXM Vehicle Tuner (purchased separately) and Subscription are required. Displaying the Radio IDBefore you listen to satellite radio, you must subscribe to the service using the SiriusXM Radio ID number. 1. Press [SRC / ] button to activate SiriusXM-mode.2. Press [ ] or [ ] to select channel “0”. The unit displays Radio ID.Notes:1. The Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner.2. Please note that the SiriusXM Radio ID does not include the letters I, O, S or F.3. Activate the SiriusXM Connect Vehicle Tuner using one of the two methods below: • Online: Go to “www.siriusxm.com/activatenow”. • Phone: Call 1-800-XM-RADIO (1-800-967-2346). • To activate SiriusXM Canada service go to www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner, or call 1-877-438-9677Storing Channel Presets1. Press [BAND / ] to select the desired band you want to store the preset in. There are 3 Satellite Radio Preset bands. Each press of [BAND / ] changes the band: SXM1 -> SXM2 -> SXM3 -> SXM12. Tune to the desired channel and then press and hold one of the preset buttons (1 through 6), to store the channel. 3. Repeat the procedure to store up to 5 other channels on to the same band.Note:• A total of 18 channels can be stored in the preset memory, 6 channels for each band (SXM1,SXM2 and SXM3).Tuning Channels using Presets1. Press [BAND / ] to select the desired band of Presets you wish to access.2. Press the preset button (1 through 6) that has your desired Satellite Radio channel stored in memory.Category Browsing1. Press and hold [BAND / ] to activate the Category Browsing mode.2. Rotate the [VOLUME] knob to select desired category.3. Press [ ] or [ ] to select desired channel within the selected Category. You can see channel name, channel number, artist, title or content by pressing [DISP].4. Press [VOLUME] to tune to selected channel.Note:If no operation is perfprmed for 10 seconds, the Category Browsing mode is canceled.Preset scanPreset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.1. Press and hold the [PS/AS] button.2. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station.Channel scan (in current category)Channel scan receives the channel (in current category) in order. This function is useful when searching for a desired channel in current category.1. Press the [PS/AS] button.2. When a desired channel is tuned in, press the [PS/AS] button again to continue receiving that channel.Note:• Be careful not to press and hold the [PS/AS] button for 1 second or longer, otherwise the preset scan function will begin and the unit starts scaning presets.Artist & Song AlertsWhile listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. The radio will display an Alert message when a matching artist or song is found on another channel. Then you can choose if you want to tune to that favorite or you can ignore it and stay on your current channel. Information on setting up the Artist and Song alerts is described below.1. While listening to favorite song, press [VOLUME] knob to add the artist or press and hold [VOLUME] knob to add the song to the “Artist & Song Alerts” list. 2. Rotate [VOLUME] knob and select “YES”, and press [VOLUME] knob to store item.3. Rotate [VOLUME] knob and select “NO”, and press [VOLUME] knob to quit.4. You can manage the stored Alert memory setting. Press and hold [MENU / ] and rotate [VOLUME] knob to select “ALERT LIST”. Press [VOLUME] knob to display stored alert items. Rotate and press [VOLUME] knob to select desired alert item. Then select “ON” to activate alert, “OFF” to deactivate or “DELETE” to delete this item. (press and hold [VOLUME] knob) You can also activate and deactivate Alert function in System Setup menu.Notes:• You can store up to 50 items for Artist & Song Alerts. “XU(sed)/YE(mpty)” is displayed when the new item is stored. X is the total number of song titles or artist names stored in memory, and Y is the total number memory locations still available for storage. • If either the artists or song title is not available, “NO SONG” or “NO ARTIST” will be displayed.• If you try to store item when memory is full, “MEMORY FULL” is displayed. If you want to store another, please delete existing alert item.Receiving and Tuning to an AlertWhenever a stored artist or song is playing on another channel alert message, “ART ALERT” or “SNG ALERT” appears on the unit display.To tune to artist or song identifi ed by the alert, press [VOLUME] knob.Notes:• If no operation is performed for 5 seconds, the unit returns to normal mode.• Artist name and Song title which you have stored and which are currently playing will be displayed in category called “MY MUSIC” in search mode.My Music searchYou can access the channel which is broadcasting the contents in the activated Alert list.1. Press and hold [MENU / ], and rotate [VOLUME] knob to select “MY MUSIC LIST”.2. Press [VOLUME] knob to display matched songs which are currently broadcasted3. Rotate [VOLUME] knob to select desired song, and press [VOLUME] to tune to that channel.Note:• If there is no matched songs broadcasted, it displays “MEM EMPTY”. SiriusXM Replay™ functionThe Replay feature allows you to pause, rewind, and replay up to 60 minutes of live SiriusXM Satellite Radio.1. While listening to a SiriusXM channel, press [MENU / ] to enter Replay mode. The display will show“PAUSE” when entering this mode.2. Press [ ] to resume playback of the stored audio from the point at which it was paused. During playback,the SiriusXM Tuner will continue to store the channel audio until you exit the Replay mode.During REPLAY playback:• Fast rewind: Press and hold [ ].• Fast forward: Press and hold [ ].• Returning to the beginning of the current song: Press [ ].(If you press [ ] in the first 2 seconds of a song,you return to the beginning of the previous song.)• Advancing to the beginning of the next song: press [ ].3. Press [MENU / ]] to fi nish Replay mode.Notes:• If you continue to press the [ ] button until the end,the Replay mode is canceled, and the unit will change to live SiriusXM radio mode. • If you change channels while in Replay mode, the unit will exit Replay mode to live Satellite mode and clear the Replay memory. • Replay mode is being kept when you change the source other than SiriusXM mode.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-11.png)
![English11SiriusXM Satallite Radio OperationsiTunes song taggingWith iTunes song tagging, you can tag songs you hear while listening to SiriusXM Satellite Radio. The tagging information is saved in your radio until you connect your iPod or iPhone and then the tagging information is transferred to your iPod/iPhone. When your iPod/iPhone is connected to iTunes, you will then be able to preview and purchase the song that you heard while listening to SiriusXM Satellite Radio.Information on using the iTunes song tagging feature is described below.1. A song may be tagged while listening to a SiriusXM channel if the display shows the “TAG” icon.2. Press [ISR] button while the desired song is playing.3. When completed, “STORED TAG X OF 64” is displayed. X means the number of tag stored.Notes:• During tagging, the iPod/iPhone takes priority to save the tag information.If no iPod/iPhone is connected, the tag information is saved to this unit. • This unit can store up to 64 pieces of tag information. When the memory of the unit is full, “MEMORY FULL” may be displayed. • When iPod/iPhone that doesn’t support the tagging function is connected, “TRANSFER FAIL” may be displayed.• If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to iPod/iPhone automatically.• If tag information already exists, “ALREADY TAGGED” will be displayed when you try to tag information again.• Tagging may be canceled by changing the frequency or station.• If a song is tagged and the remaining storage volume of the connected iPod/iPhone is suffi cient to hold the song’s tag information, it will be saved on the iPod/iPhone.Changing the DisplayText information, such as the channel name, artist name/feature, song/program title and content is available with each SiriusXM channel. The unit can display this text information as explained below.1. In SiriusXM mode, press [DISP] button. Each time you press this button, the display changes as shown below. Band/Channel number/channel name => Artist Name => Song Title=> Content Info => Category Name => Clock => Band/Channel number/channel name* If there is no text information,nothing will be displayed.Parental Lock / UnlockThe SiriusXM Parental Control feature allows you to control access to channels that you consider inappropriate for younger listener.When enabled, the Parental Control feature requires you to enter a password to tune to the locked channels. Information on setting up the password, setting up the channels to be locked, and the method to access the locked channels is described below.1. For setting up the password, press and hold [DISP] and press [ ] to select “PARENTAL PASSWORD”. Press [VOLUME] knob to change password. Enter old password, new password. To enter code, rotate [VOLUME] knob to decide number and [ ] or [ ] to select digit. Each time you need to press and hold [VOLUME] knob to confirm password. (Original password is “0000”)2. For setting up the channels to be locked, press and hold [DISP] during tuning to the desired channel, and select “LOCK CH” and press [VOLUME] knob to start to lock channel. You will be asked to input password. Enter password and “LOCK” will be displayed if it is successful.3. For unlocking the locked channel, press and hold [DISP], and press [ ] to select “UNLOCKCH”. Enter password and you can unlock the channel.4. For accessing the locked channels, select channel by “DIRECT SELECT”. Press and hold [MENU / ] and select “DIRECT SELECT” by pressing [VOLUME] knob. Input desired locked channel (need to input 3 digit) and input password, then you can tune to that locked channel.CD/MP3/WMA OperationsThis unit can playback MP3/WMA fi les Note:• If you play a WMA file with active DRM (Digital Rights Management), there will be no audio.To disable DRM (Digital Rights Management) When using Windows Media Player 9/10/11, click on Tool -> Options -> Copy Music tab, then under Copy settings, unclick the Check box for copy project music. Then, reconstruct fi les.Personally constructed WMA fi les are used at your own responsibility.Precautions when creating MP3/WMA fi leUsable sampling rates and bit rates1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR 2. WMA: Bit rate 8 kbps-320 kbpsFile extensions1. Always add a file extension “.MP3”, “.WMA” to MP3, WMA fi le by using single byte letters. If you add a file extension other than specified or forget to add the fi le extension, the fi le cannot be played.2. Files without MP3/WMA data will not play. The fi les will not play if you attempt to play fi les without MP3/WMA data.* When VBR fi les are played, the play time display may differ the play location.* When MP3/WMA fi les are played, a little no sound part is caused between tunes.Logical format (File system)1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or Joliet” or Apple ISO as the writing software format. Normal play may not be possible if the disc is recorded on another format.2. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 32 single byte alphabetical letters and numerals (including an extension).3. Do not affi x a name to a fi le inside a folder having the same name.Folder structureA disc with a folder having more than 8 hierarchical levels will be impossible.Number of fi les or folders1. Up to 999 files can be recognized per folder. Up to 3000 fi les can be played.2. Tracks are played in the order that they were recorded onto a disc. (Tracks may not always be played in the order displayed on the PC.)3. Some noise may occur depending on the type of encoder software used while recording.Eject functionJust pressing the [ ] button, ejects the disc .Notes:• If you force a CD into before auto reloading, this can damage the CD.• If a CD (12 cm) is left ejected for 15 seconds, the CD is automatically reloaded (Auto reload).Listening to a disc already loaded in the unitPress the [SRC / ] button to select the CD/MP3/WMA mode.When the unit enters the CD/MP3/WMA mode, play starts automatically.Loading a CD Insert a CD into the center of the CD SLOT with label facing up. The CD plays automatically after loading.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-12.png)
![English12Notes:• Never insert foreign objects into the CD SLOT.• If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.• Discs without the or TEXT mark and CD-ROMs cannot be played by this unit.• Some CD-R/CD-RW discs may not be usable.Pausing play1. Press the [ 4 ] button to pause play. “PAUSE” appears in the display.2. To resume CD play, press the [ 4 ] button again.Displaying CD titlesThis unit can display title data for MP3/WMA disc.When SCROLL is OFF, each time you press the [ DISP ] button to change the title display.MP3/WMA discTrack - > Folder -> File title -> Album -> Title -> Artist -> Track ...Notes:• If MP3/WMA disc has no ID3 TAG, “NO TITLE” appears in the display.• Only ASCII characters can be displayed in Tags.Selecting a trackTrack-up1. Press the [ ] button to move ahead to the beginning of the next track.2. Each time you press the [ ] button, the track advances ahead to the beginning of the next track.3. For MP3/WMA disc, press and hold the [ 6 ] button (1 sec.) to move ahead to +10 tracks.CD/MP3/WMA OperationsTrack-down1. Press the [ ] button to move back to the beginning of the current track.2. Press the [ ] button twice to move back to the beginning of the previous track.3. For MP3/WMA disc, press and hold the [ 5 ] button (1 sec.) to move back to -10 tracks.Fast-forward/Fast-reverseFast-forwardPress and hold the [ ] button .Fast-reversePress and hold the [ ] button .* For MP3/WMA discs, it takes some time until the start of searching and between tracks. In addition, some errors may occur in the play time.Folder SelectThis function allows you to select a folder containing MP3/WMA fi les and start playing from the fi rst track in the folder.1. Press the [ 5 ] or [ 6 ] button. Press the [ 6 ] button to move the next folder. Press the [ 5 ] button to move the previous folder.2. To select a track, press the [ ] or [ ] button.Search Function1. Press the [MENU / ] button to enter FOLD SCH mode. Press the [VOLUME] button to enter the folder list search mode.2. Turn the [VOLUME] knob to select a folder.3. Press the [VOLUME] button to enter the file list search mode. And then the track list appears in the display.4. Turn the [VOLUME] knob to select a track.5. Press the [VOLUME] knob to play.* When play back MP3 / WMA file, this function is performed in the current folder.CD/MP3/WMA OperationsTop functionThe top function resets the CD player to the fi rst track of the disc. Press and hold the [ 4 ] button (1 sec.) to play the fi rst track (track No. 1) on the disc.* In case of MP3/WMA, the fi rst track of the current folder will be played.Other various play functionsScan playThis function allows you to locate and play the fi rst 10 seconds of all the tracks recorded on a disc.Press the [ 1 ] button to perform scan play.Repeat playThis function allows you to play the current track repeatedly or play a track currently being played in the MP3/WMA folder repeatedly.CD:1. Press the [ 2 ] button once or more until “RPT ON” appears on the LCD to perform repeat play.1. Insert a USB device into the rear of the unit USB cable. When connecting a USB device, the unit will read the fi les automatically.2. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device.3. Operation is same as MP3/WMA operation.USB Operations2. Press [ 2 ] button again to cancel repeat playback, “RPT OFF” appears on the LCD. MP3/WMA:1. Press the [ 2 ] button once or more until “TRACK RPT” appears on the display to perform repeat play, and “RPT” segment lights on. 2. For MP3/WMA files, press [ 2 ] button repeatedly until “FOLD RPT” appears on the display for folder repeat play.3. Press [ 2 ] button repeatedly until “RPT OFF” appears on the display to cancel repeat playback, and “RPT” segment goes off . Random playThis function allows you to play all tracks recorded on a disc in a random order.Press the [ 3 ] button to perform random play.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-13.png)
![English13iPod & iPhone OperationsConnectConnect an iPod or iPhone to the USB connector via CCA-750 cable.When connecting a device, the unit will read the fi les automatically. The track information displays on the screen once playback start.MENUIn the S-CTRL OFF mode, press [MENU / ] button, rotate the [VOLUME] knob select “MUSIC” or “VIDEO”.Select “MUSIC”, press the [VOLUME] knob, then rotate the [VOLUME] knob to select PLAYLISTS / ARTISTS / ALBUMS / SONGS / GENRES / COMPOSERS, and press the [VOLUME] knob to confi rm. Select “VIDEO”, press the [VOLUME] knob, then rotate the [VOLUME] knob to select MOVIES / MUSIC VIDEOS / TV SHOWS / VIDEO PODCASTS / RENTALS, and press the [VOLUME] knob to confi rm. Note:VIDEO MENU item is different by the model of connected iPod and language setting.Repeat playThis function allows you to play the current track repeatedly or play all tracks in your iPod/iPhone repeatedly.1. Press the [ 2 ] button once or more until “RPT ON” appears on the LCD to perform repeat play.2. Press [ 2 ] button repeatedly until “RPT OFF” appears on the LCD to cancel repeat playback. Random playThis function allows you to play all tracks recorded on a disc in a random order.1. Press [ 3 ] button repeatedly until “RDM ALBUM” appears on the LCD for album random play.2. Press the [ 3 ] button once or more until “RDM SONG” appears on the LCD to perform random play.3. Press [ 3 ] button repeatedly until “RDM OFF” appears on the LCD to cancel random playback. Setting iPod simple control modeUse this function if you wish to operate through your iPod connected to this unit via the USB cable.* The factory default setting is “ OFF ”.1. Press and hold [ DISP ] button to enter system setup. 2. Press [ ] or [ ] button to select “ S-CTRL”. 3. Rotate the [VOLUME] knob to select “ ON ” or “ OFF ” . • ON: Operations are made through your iPod. • OFF: Operations cannot be made through your iPod.Notes:• When performing iPod operations using simple control mode, make the operations slowly. If repetitive operations are performed too quickly, unforeseen errors may occur.• When performing iPod operations using simple control mode, please do not operate the iPod and the unit at the same time, otherwise there may be unexpected event happened.• Some iPod models do not support this function. Consult your nearest Clarion dealer or website to confi rm which models do not support this function. to monitoriPod menu alphabet searchThis function searches the subfolders for desired alphabetical letters.1. Press the [MENU / ] button to select the iPod menu mode.2. Press the [VOLUME] knob to switch between categories. MUSIC: PLAYLISTS, ARTISTS, ALBUMS, SONGS, GENRES, COMPOSERS VIDEO: MOVIES, MUSIC VIDEOS, TV SHOWS, VIDEO PADCASTS, RENTALS3. Press the [VOLUME] knob. (The contents of the category are displayed.)4. Press and hold the [DISP] button (1 sec.).5. Rotate the [VOLUME] knob to select the desired letter to search.6. Press the [DISP] button again to next perform search.7. Press the [ VOLUME ] knob to confi rm.Listening to PandoraYou can listen to Pandora internet radio by connecting an iPod/iPhone that has Pandora Application already installed.To start streaming, connect the iPod/iPhone with Pandora already launched.When the unit displays “PLEASE LAUNCH Pandora APPLICATION ON MOBILE DEVICE” in Pandora mode, please launch the Pandora Application by operating the iPod/iPhone connected.1. Press the [SRC/ ] button to enter the Pandora mode.Selecting a station from listPress the [MENU / ] button and select “BY DATE” or “A-Z” by rotating the [VOLUME] knob and press the [ VOLUME ] knob.• BY DATE: List in an created date order• A-Z: List in an alphabetical orderGo to next station or previous station(an alphabetical order)Press the [ ] button on the panel or remote control to go to next station.Press the [ ] button on the panel or remote control to go to previous station.Thumbs up/downThumbs up: press the [ 6 ] button on the panel or the [RDM] button on the remote control for thumbs up. Giving a track the thumbs up will tell Pandora to play more tracks like that one. Thumbs down: press the [ 5 ] button on the panel or the [SCN] button on the remote control for thumbs down. Giving a track the thumbs down will skip to the next track (subject to skip limit), and Pandora will remember not to play that track on the station again.Notes:• You can personalize your stations by “thumbs up” or “thumbs down”.• Pandora limits the number of thumbs down allowed on their service. If you attempt to thumbs down tracks beyond the limit, the current song continues to playback.BOOKMARK artist or trackShort-press the [VOLUME] knob or the [RPT] buton on the remote control to Bookmark current track. Long-press the [VOLUME] knob or the [RPT] button on the remote control to Bookmark current artist of the track.Creating new stations Short-press the [1] button on the panel to create a new station from the current artist. Long-press the [1] button on the panel to create a new track.Note:If the name of the station you wish to create for a track title or an artist name is the same as the station name currently playing, “NOW PLAY” appears on the display and the station will not be created.SkipLong press the [ ] button on the panel or on the remote control for the next tracks in station.iPod & iPhone Operations](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-14.png)
![English14iPod & iPhone OperationsNote:• Pandora limits the number of skips allowed on their service. If you attempt to skip tracks beyond the limit, “SKIP LIMIT” is displayed.Play/PausePress the [ 4 ] button on the panel or the [ ] button on the remote control for play / pause.ConnectConnect an iPod or iPhone to the USB connector via CCA-750 cable.When connecting a device, the unit will read the files automatically. The track information displays on the screen once playback start.MENUIn the S-CTRL OFF mode, press [MENU / ] button, rotate the [VOLUME] knob to select “MUSIC” or “VIDEO”.Select “MUSIC”, press the [VOLUME] knob, then rotate the [VOLUME] knob to select PLAYLISTS / ARTISTS / ALBUMS / SONGS / GENRES / COMPOSERS, and press the [VOLUME] knob to confi rm. Select “VIDEO”, press the [VOLUME] knob, then rotate the [VOLUME] knob to select MOVIES / MUSIC VIDEOS / TV SHOWS/ VIDEO PODCASTS / RENTALS, and press the [VOLUME] knob to confi rm.Note:VIDEO MENU item is different by the model of connected iPod and language setting.Bluetooth OperationsThe Bluetooth allows you to utilize your boat’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The audio system with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music.Notes:• Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction.• If leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction.• This system will not operate or may operate improperly with some Bluetooth audio players.• Clarion cannot guarantee the compatibility of all mobile phones together with unit.• Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call.Handsfree Operations Pairing1. Turn on Bluetooth function of your mobile phone.2. Enter mobile phone’s Bluetooth setup menu.3. Search for new Bluetooth devices.4. Select M303 from the pairing list on the mobile phone.5. Enter “0000” as the password (The password default setting is “ 0000 ”).6. After pairing successfully, the unit will enter Bluetooth mode automatically, and “BLUETOOTH CONNECTED” will appear on the LCD.7. The unit can connect three units.* During pairing, depending on type of mobile phone, a six digit PIN code will be shown on both the source unit’s display and the mobile phone. In this case, please make sure that you have the same PIN code on both devices, and then confi rm on the mobile phone. Making a callOperation from Bluetooth menuPress the [SRC / ] button to switch the source to “BLUETOOTH”. Press [MENU / ] button to select a way to make outgoing call:• Dial Number1. Press the [MENU / ] button.2. Rotate the [VOLUME] knob to switch “DIAL NUMBER”. 3. Press the [VOLUME] knob to confi rm the selection.4. Rotate the [VOLUME] knob to select a number, press the knob to confirm and ready to input the next digit. Repeat the above until all numbers inputted.5. Press the [BAND / ] button to dial.6. Press [MENU / ] to terminate call.• Dialled/Missed/ ReceivedYou can search any Dialled/Missed/Received .1. Rotate the [VOLUME] knob to select “DIALLED”, “MISSED” , “RECEIVED”.2. Press the [VOLUME] knob to enter the selected call history.3. Rotate the [VOLUME] knob to scroll the contacts.4. When the contact name or mobile phone No. is displayed, press the [VOLUME] knob to call the mobile phone No. of that contact.* Press the [MENU / ] button to end the call.• Call from PhonebookYou can search the contact name in the phonebook and make call.Repeat playThis function allows you to play the current track repeatedly or play all tracks in your iPod/iPhone repeatedly.1. Press the [ 2 ] button once or more until “RPT ON” appears on the LCD to perform repeat play.2. Press [ 2 ] button repeatedly until “RPT OFF” appears on the LCD to cancel repeat playback.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-15.png)
![English15Bluetooth Operations Bluetooth Operations1. Rotate the [VOLUME] knob to select “USER PHONEBOOK” .2. Press the [VOLUME] knob to enter the selected phonebook.3. Rotate the [VOLUME] knob to scroll the contacts.4. The phone number and the name to scroll display.When the contact name is displayed, press the [VOLUME] knob to call the mobile phone No. of that contact.* Press the [MENU / ] button to end the call.Notes:• Some mobile phones may not be able to transfer data of Phonebook.• After RESET, please wait few minutes until data transferred following to the Bluetooth mode selection. During that, “PHONEBOOK UPDATING” is on the display.• RedialYou can call last dialed number.Press and hold the [BAND / ] button (1sec).• Call Transfer You can switch Handsfree call and mobile phone call. Press the [BAND / ] button during call.• Answering a call You can answer an incoming call by pressing the [BAND / ] button.* Press the [MENU / ] button to reject an incoming call.Audio Streaming OperationsWhat is audio streaming?Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their audio system wirelessly and listen to the tracks through the boat’s speakers. Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered.CAUTIONPlease avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback.Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone.System will always return to Radio mode if audio streaming is disconnected.Note:Be sure to read the chapter “Pairing” before proceeding.Play / Pause a track1. Push the [ 4 ] button to pause audio playback.2. To resume audio playback, push the [ 4 ] knob again.Selecting a trackTrack-up1. Press the [ ] button to move to the beginning of the next track.2. Each time the [ ] button is pressed, playback proceeds to another track in the advancing direction.Track-down1. Press the [ ] button to move to the beginning of the previous track.2. Each time the [ ] button is pressed, playback proceeds to previous track in the reverse direction.Note:Playing order will depend on Bluetooth audio player. When [ ] button is pressed, some A2DP devices will restart the current track depends on the duration of playback.During music streaming playback, “A2DP” will be shown on the display. When A2DP and HFP device is disconnected,“BLUETOOTH DISCONNECT” will be shown on the The rear AUX terminals of this system is provided to allow playback of sounds and music from external devices connected to this unit.Press [SRC / ] button on the panel to select “AUX”.AUX Input sensitivity setting1. Press and hold the [DISP] button (1 sec.).2. Turn the [VOLUME] knob to select “AUX SENS”.3. If the output level of connected external audio player is “HIGH”, rotate [VOLUME] knob and choose “LOW”. And if the output level is “LOW”, choose “HIGH”.AUX Operationsdisplay and return to previously selected audio source. Some Bluetooth audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play / pause status in BT MUSIC mode.ID3TAG displayDuring music streaming playback, for music information that is longer than the display panel:When SCROLL is ON, the LCD will display ID3 TAG information cyclely, e.g: ALBUM->TITLE->ARTIST...When SCROLL is OFF, the LCD will display one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by press [DISP] button.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-16.png)
![English166. TROUBLE SHOOTINGGENERALProblem Cause MeasureUnit can not power on.Unit fuse blown. Replace with new fuse of correct rating.Boat battery fuse blown. Replace with new fuse of correct rating.Unit can not power on.Nothing happens when buttons are pressed.Display is not accurate.The microprocessor has malfunctioned due to noise, etc.Turn off the power and remove the DCP.Press the [RESET] button with a thin rod.Note:When the [RESET] button is pressed, turn off the ACC power.** When the [RESET] button is pressed,frequencies of radio stations, titles, etc. stored in memory are cleared.No/low audio output.Improper audio output connection. Check wiring and correct.Volume set too low. Increase volume level.Speakers damaged. Replace speakers.Heavily biased volume balance. Adjust the channel balance to center position.Speaker wiring is in contact with metal part of boat. Insulate all speaker wiring connections.Poor sound quality or distortion.Non-standard disc used. Use a standard disc.Speaker power rating does not match unit. Replace speakers.Wrong connections. Check wiring and correct.Speaker is shorted. Check wiring and correct.Unit resets itself when engine is off.Incorrect connection between ACC and Battery. Check wiring and correct.DISC PlayerProblem Cause MeasureDisc cannot be loaded.Another disc is already loaded. Eject the disc before loading the new one.There is an object install installed the unit. Remove the object inside the unit.Sound skips or is noisy.Compact disc is dirty. Clean the compact disc with a soft cloth.Compact disc is heavily scratched or warped.Replace with a compact disc with no scratches.Sound is bad when power is fi rst turned on.Condensation may form on the internal lens when the boat is parked in a humid place.Let dry for about 1 hour with power on.BluetoothUSBSiriusXM Advisory Messages Problem Cause MeasureUSB device cannot be inserted.The USB device has been inserted with wrong direction.Reversing the connection direction of the USB device, try it again.The USB connector is broken. Replace with a new USB device.USB device is not recognized.The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device.Connectors are loose.No sound heard with the display “No File” shown.No MP3/WMA fi le is stored in the USB device. Store these fi les properly in the USB device.Sound skips or is noisy. MP3/WMA fi les are not encoded properly. Use MP3/WMA fi les encoded properly.Problem Cause MeasureCannot pair the Bluetooth enabled device with the audio system.The device does not support the profi les required for the system. Use another device to connect.The Bluetooth function of the device is not enabled.Refer to the user manual of the device for how to enable the function.The audio quality is poor after connection with a Bluetooth-enabled device.The microphone is not correctly positioned.Adjust the position of the microphone.For example, stick the microphone onto the dashboard where close to the driver.The Bluetooth reception is poor. Move the device closer to the audio system or remove any obstacle between the device and the system.Message Description CHEK TUNER Check the SiriusXM tuner connection on the back of the unit to ensure that its correctly connected. CHK ANTENAEnsure the SiriusXM antenna cable is connected to the SiriusXM tuner correctly. Check the SiriusXM antenna wire for breaks or sharp bends. Replace the antenna if necessary. Press RESET located….. If the message remains, the antenna may have been damaged. NO SIGNAL The vehicle must be outside, and the antenna must have a clear view of the southern sky.The magnetic antenna must be mounted on the outside of the vehicle for the best reception.CHAN UNSUB This channel is not included in your SiriusXM subscription plan. Call 1-866-635-2349 to subscribe. CH UNAVAILThis channel is not a valid SiriusXM channel.The channel number has been entered incorrectly, or the channel was removed from the SiriusXM channel lineupCH LOCKEDThe selected channel has been locked by the parental controls, or a mature channel has been selected. A prompt to enter the unlock code will appear. Enter the unlock code as described on page 9. SUBSCRIPTN UPDATEDAn update to your SiriusXM subscription has been received by the SiriusXM tuner. Press any button to continue.](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-17.png)
![English177. ERROR DISPLAYSDisplay Cause MeasureERROR 3 Disc is inserted incorrectly. Eject the disc then reload it properly.The disc format is not supported. Try another disc.ERROR 5 This is a failure of deck’s mechanism. Consult your store of purchase.If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem.If an error display other than the ones described above appears, press the [RESET] button. If the problem persists, turn off the power and consult your store of purchase.* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.8. SPECIFICATIONSFM TunerFrequency range:USA : 87.9 - 107.9MHzEurope : 87.5 - 108.0MHzAustralia : 87.5 - 108.0MHzUsable sensitivity: 8dBfFrequency response: 30Hz-15kHzStereo separation: 30dB(1kHz)Signal/noise ratio: >55dBAM TunerFrequency range:USA : 530 - 1710KHzEurope : 153 - 279KHz (LW) 531 - 1602KHz (MW)Australia : 531 - 1629KHzUsable sensitivity (S/N=20dB): 30dBμCD PlayerSystem: Disc digital audio systemFrequency response: 20Hz-20kHzSignal/noise ratio: >94dBTotal harmonic distortion: Less than 0.1% (1kHz)Channel separation: >60dBMP3/WMA modeMP3 sampling rate: 8 kHz to 48 kHzMP3 bit rate: 8 kbps to 320 kbps / VBRWMA bit rate: 8 kbps to 320 kbpsLogical format: ISO9660 level 1,2 Joliet fi le systemUSBSpecifi cation: USB 1.0/2.0Playable audio format: MP3(.mp3): MPEG 1/2/Audio Layer-3 WMA(.wma): Ver 7/8/9.1/9.2BluetoothSpecifi cation: Bluetooth Ver. 2.0+EDRProfi le: HFP (Hands-free Profi le) A2DP (Advanced Audio Distribution Profi le) AVRCP (AV Remote Control Profi le) PBAP (Phone Book Access Profi le)Send/Receive Sensitivity: Class 2Audio Amplifi erMaximum power output: 192W (48W x 4)Speaker impedance: 4 (4 to 8 allowable)InputAudio input sensitivity: High: 320mV (at 1V output) Mid: 650mV (at 1V output) Low: 1.3V (at 1V output) (input impedance 10 k or greater) Aux-in level: ≤2VGeneralPower supply voltage: 14.4VDC (10.8 to 15.6V allowable), negative groundPre-Amp output voltage: 2.0V (CD play mode: 1kHz, 0dB, 10k load) Fuse: 15ADimensions of the Main Unit: 188mm Width × 58mm Height × 190mm Depth 7-2/5(width) × 2-7/25(Height) × 7-12/25(Depth)Weight of the Main Unit: 3.30lb.(1.50kg) Dimensions of the Remote Control unit: 43mm Width × 11mm Height × 113mm Depth 1-2/3(Width) × 2/5(Height) × 4-2/5(Depth)Weight of the Remote Control Unit: 1.16oz. (36g) (including battery)Note:• Specifications and design are subject to change without notice for further improvement.Power Output:18W RMS x 4 Channels at 4 and 1% THD+NSignal to Noise Ratio:95dBA (reference: 1W into 4)6-2/3” 170mm7-2/5” 188mm2-7/25” 58mm6-2/5” 163mm1/2” 14 m1-4/5” 46mm2” 50mm 7” 178mm7-12/25” 190mmm](https://usermanual.wiki/Faurecia-Clarion-Electronics/M303/User-Guide-1873009-Page-18.png)
