Faurecia Clarion Electronics PF3292 Car Audio User Manual
Clarion Co Ltd Car Audio
UserManual.wiki
>
Faurecia Clarion Electronics
>
PF3292 User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![SUBARU Standard model Operation 100126.doc - 6 / 183 - ２． OUTLINE ・ This operation specification is the operation specification of SUBARU ZN4/PD5（Standard). ・ This operation specification is the standard specification for all densinations of SUBARU ZN4/PD5（Standard). ・ For the control connent of setting microcontroller, please refer to [ZN4/PD5_MICON Specification]. ・ This operation specification is also the test specification. ・ Please check the box if you have checked the item. ２-１． Destination / Model Set Name Outline Car Model Set Destination Note PF-3292 North America（U） For Left Handle PF-3293 Europe（E） For Right Handle PF-3294 Europe（E） For Left Handle ZN4（IMPREZA） PF-3295 Australia（A） For Right Handle PF-3297 North America（U） For Left Handle PF-3298 Europe（E） For Right Handle PF-3299 Europe（E） For Left Handle Standard 2DIN 1CD PD5（FORESTER） PF-3300 Australia（A） For Right Handle ２-２． Warning ・ Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.. ・ This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). ・ This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-6.png)
![SUBARU Standard model Operation 100126.doc - 59 / 183 - ５-５-８． Switch the Title Function Switch the XM title Operation of button Touch the "TEXT" key (operation when KEY ON) Destination North America ・ Europe ・ Australia ・ Common Detail If you touch the "TEXT" key, the title will display like following. Default setting is displaying the channel number. 「CH NUMBER」 → 「CH NAME」 → 「TITLE」 → 「NAME」 → 「CATEGORY」 → 「CH NUMBER」 When you switch the title, it will display [CH NUMBER], [CH NAME], [TITLE], [NAME] and [CATEGORY] 3seconds for each, and then display the title. 10 characters information will be supported. (8&16 characters will be not) The "TEXT" key will be effective in scan mode. The "TEXT" key will be not effective in Category Search Mode. The "TEXT" key will be not effective while displaying RADIO ID. The "TEXT" key will be not effective while adjusting Volume/Audio/Menu.。](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-59.png)
![SUBARU Standard model Operation 100126.doc - 69 / 183 - ５-６-８． Switch the Title Function Switch Sirius title Operation of button Touch the "TEXT" key for less than 0.5sec. Destination North America ・ Europe ・ Australia ・ Common Detail If you touch the "TEXT" key, the title will display like following. Initial setting is displaying the channel number. 「CH NUMBER」 → 「CH NAME」 → 「TITLE」 → 「NAME」 → 「CATEGORY」 → 「CH NUMBER」 When you switch the title, it will display [CH NUMBER],[CH NAME],[TITLE],[NAME] and [CATEGORY] 3seconds for each, and then display the title. 10 characters information will be supported. (Same as XM. The information more than 10 characters will be truncated) The "TEXT" key will be effective in scan mode. The "TEXT" key will be not effective in Category Search Mode. The "TEXT" key will be effective while displaying RADIO ID. The "TEXT" key will be not effective while adjusting Volume/Audio/Menu.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-69.png)
![SUBARU Standard model Operation 100126.doc - 98 / 183 - ５-８-１３． Switch to TITLE （CD/USB） Function Switch to TITLE （CD/USB） Operation of button Touch the TEXT key for less than 0.5 Destination North America ・ Europe ・ Australia Detail It will switch to next title mode like following if you touch the TEXT key for less than 0.5sec in CD Mode. Initial setting is displaying P-TIME. It will go to display the last mode when connects next time even when ACC（POWER） OFF/ON, NO DISC/NO DEVICE. It will display the mode name for 3sec then display the title if you switch to Displaying TITLE Mode. It will display [NO TITLE] if there is no title. The TEXT key is effective in every trick play mode. The TEXT key is not effective when displaying VOLUME / AUDIO / MENU / iPod LIST screen. It will keep the last display mode for each media mode.（Such as display mode of ARTIST TITLE, ALBUM TITLE.） ■ When displaying CD-DA It will switch to next title mode like following no matter whether there is CD-TEXT or not when playing CD-DA. P-TIME → DISC TITLE → ARTIST TITLE → TRACK TITLE → P-TIME It will display TRACK ARTIST for ARTIST TITLE, if there is no TRACK ARTIST it display DISC ARTIST instead. It willdisplay [NO TITLE] when there is neither TRACK ARTIST nor DISC ARTIST. ■ When playing DISC/MSC MP3/WMA/AAC It will switch to next title display like following when playing DISC/MSC MP3/WMA/AAC. It will display [ROOT] for folder name if you select ROOT folder (the top layer). It will also display the extension when displys FILE TITLE. P-TIME → FOLDER TITLE → FILE TITLE → P-TIME ■ When playing iPod It will display the information of the track playing now. It will display the conent which is got from iPod. P-TIME → ARTIST TITLE → ALBUM TITLE → SONG TITLE → P-TIME ※ It does not support to display chapter name.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-98.png)
![SUBARU Standard model Operation 100126.doc - 102 / 183 - ５-９． Operation of USB ５-９-１． USB CONNECT Function Connect to USB Media (1 USB Drive) Operation of button Connect to USB Media with USB Concave shape A Connector. Destination North America ・ Europe ・ Australia Detail It will not switch to USB Mode automatically even if it connects to USB Media. ・ In USB Mode It will display [NO DEVICE] if it connects to nothing with USB connector. It will display [USB READING] until it gets ready to play the device that connected. It will display [USB READING] no matter what it is connecting to, iPod, MSC or unsuport device. ・ Connected to MSC(Mass Storage Class) in USB Mode It will play from the first track of the first folder when it finishes USB READING. （TOP PLAY） It will play the resume when reconnected to the same MSC. Resume information will be scraped each time it connects to an iPod. ・ Connected to iPod in USB Mode It will start to play from where controlled by iPod when it finishes USB READING. （Depends on iPod） It will start to play from the first track of song category after it finishes USB READING when it is connected to an iPod that is stopped. It will start to play from the first track of song category after it finishes USB READING when it is connected to an iPod that is playing VIDEO. It will be ALL RPT Mode if it is connected in RPT Mode. It sets ALL RPT automaitically by USB Control Comand. It supports audio only for iPod. （Video is not supported.） The Logo of SUBARU will be displayed on iPod screen when connected. ※ You cannot do an operation on iPod while connected. However, Touch Pannel Model iPod will be effective. ・ Others It is able to connect to an iPod when ACC is OFF, but it cannot recognaize the device. Response latency for USB DEVICE will be 15sec when turn ACC OFF/ON. It will display [USB READING] in the time even if nothing connected with USB connector. （Specification for bad reaction device.）](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-102.png)
![SUBARU Standard model Operation 100126.doc - 103 / 183 - ５-９-２． USB DISCONNECT Function Disconnect USB Device Operation of button Disconnect USB Connector by hand Destination North America ・ Europe ・ Australia Detail It will keep USB Mode when you disconnect USB device in USB Mode. It will keep current Mode when you disconnect USB device in other mode except USB Mode. It will start USB Mode when you turn POWER ON next time if you disconnect the device when POWER is OFF. It will work like following if you replace the connected device when POWER(ACC) is OFF.（Destination for All Models） If you replace the connected device with an iPod, it will start to play from where controlled by the iPod. If you replace the connected device with a MSC (Even it is the same MSC.), it will start to play from top. It will display [USB READING] and start USB Mode when you turn POWER ON next time if you disconnect the device in USB Mode when POWER is OFF. If no device detected it will go to NO DEVICE. （It takes 15sec to confirm NO DEVICE.） Trickplay Mode will be released if you disconnect the USB device. Trickplay Mode will be kept when you turn ACC on next time if you disconnectand connect the same USB device When ACC is OFF. (It cannot detect device connectin or disconnection when ACC is OFF.)](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-103.png)
![SUBARU Standard model Operation 100126.doc - 126 / 183 - ５-９-１９． Select Category （iPod） 1/2 Function Select Category of iPod Only Audio Category is able to be selected. The iIPod may go to Stop Mode. It will display iPod MENU when it goes to Stop Mode. Operation of button Touch the LIST / BACK for less than 1.5sec ： Call iPod MENU （iPod MENU Released） Touch the LIST / BACK for less than 1.5sec ： List Back（iPod MENU Displaying） Touch the LIST / BACK for more than 1.5sec ： Release iPod MENU（iPod MENU Displaying） Turn right the TUNE key ： iPod MENU 内 UP（iPod MENU Displaying） Turn left the TUNE key ： iPod MENU 内 DOWN（iPod MENU Displaying） Touch the TUNE key ： Decide the Item（iPod MENU Displaying） Destination North America ・ Europe ・ Australia Detail It is able to select audio category of iPod in iPod MENU. It will display Playlists when you open iPod MENU.（The list in this layer is called Top Menu.） Item order will be the following when you open the Top Menu. Playlists ⇒ Artists ⇒ Albums ⇒ Songs ⇒ Podcasts ⇒ Genres ⇒ Composers ⇒ Audiobooks ⇒ Playilists・・・ The Items are cyclical. (iPod MENU displaying) It will stop moving for 500ms when it goes from the beginning to the end or the end to the beginning.. For Example ） In Top Menu Stop at Audiobooks for 500ms when goes from Audiobooks to Playlists. Stop at Playlists for 500ms when goes from Playlists to Audiobooks It will display [NO MUSIC] if there is no item in the list you selected to go when touch the TUNE key. It will return to upper list and it is able to select list/item, if you touch the LIST / BACK key for less than 1.5sec when displaying [NO MUSIC]. （The LIST / BACK key is able to do that itself even not in dispalying [NO MUSIC]. It wiil display P-TIME temporary then goes to the main Screen and plays the track if you selected a track and touched the TUNE key. It wiil release iPod MENU automatically and display P-TIME temporary then goes to the main Screen and plays if you do no operation in 10sec when you open the list. It will return to upper list if you listback from current iPod MENU. It will display the list of what you select last time. It is able to return to main Screen at last if you touch the key till it returns to main Screen. It is unable to listback in Main Screen. （It will go to the Top MENU in iPod MENU） It will release iPod MENU Screen and go to Main Screen if you touch the LIST / BACK key for more than 1.5sec in iPod MENU Screen.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-126.png)
![SUBARU Standard model Operation 100126.doc - 130 / 183 - ５-９-２２． Display ERROR (USB) （1/2） Function Display ERROR in USB Mode Operation of button - Destination North America ・ Europe ・ Australia Detail It is able to switch other mode or adjust AUDIO when ERROR occurs. It will nothing when ERROR occurs in other mode except USB Mode.（Display ERROR only in USB Mode） ■ Bus Error It occurs when more than 1.5A overcurrent caused by USB 5V Bass shorts. It displays [CHECK DEVICE]. （Refer to Display Specification for Detail） It will return by turning ACC OFF/ON. （It will occur right away if it still shorts.） It will stop power supply automatically but display nothing when the current is between 1 to 1.5A. It will return automatically if the cause of the overcurrent removed. ■ Unsupported Device ERROR It occurs when it is connected to a device which is not supported, such as USB mouse. It also occurs when iPod is frozen or cannot communication rightly. It occurs if it is connected to an iPod which is not Object iPod. (such as iPod 4G) It displays [CHECK DEVICE]. （Refer to Display Specification for Detail） It will return when disconnect them. ■ Playing ERROR It occurs when USB communication disconnected by surge or decoding failure happens when playing.. It occurs when timeout happens for iPod responses extremely late.（Soft wait for about 60sec.） It occurs when error is notified by iPod. （iPod always responses normal command and may notify error in rare cases.） It displays [CHECK DEVICE]. （Refer to Display Specification for Detail） It will return when disconnect them. It may return automatically after displaying error because it will retry if you do nothing. （It may occurs again after retried for different eroors.） ■ iPod Recognization ERROR It will display the ERROR when error occurs when it is certifying the connecting iPod. It mainly happens with imitation iPod, Unstable iPod and so on. It displays [CHECK DEVICE]. （Refer to Display Specification for Detail） ■ HUB ERROR It occurs when it is connected to USB-HUB. Sometimes it also occus if there are both Mass Storage Class and HUB Class. It displays [CHECK DEVICE]. （Refer to Display Specification for Detail） It will return when disconnect them.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-130.png)
![SUBARU Standard model Operation 100126.doc - 140 / 183 - ５-１１． Operation of Bluetooth HFP ５-１１-１． VOICE COMMAND Function It is the function to call Menu, Phonebooks or set the setting by Voice Command. Operation of button Touch the TALK key and say effective Voice Commands. Destination North America ・ Europe ・ Australia Detail It is able to call menu or make a call by VOICE COMMAND. Only Canadian and French languages are supported for North America Destination in Voice Command. Touch the TALK key and say the Voice Command when it becomes effective. It will display “LISTENING” when you say a Voice Command. (It will end the Mode in 5sec after it cannot recognize theCommand.) It is available to registrate VOICE TAG for Mobile Phone or Phonebooks to call these functions out by Voice Command. [REPEAT] and [CANCEL] are always effective when the TALK key is effective. If you say “REPEAT” it will repeat the guidance output just before you touch the TALK key. If you say “CANCEL” it will go to to the last source from BT MENU. Some of HELP Commands are effective. If you say “HELP” it will guide to the effective Voice Command. ＶＯＩＣＥ TAG is effective for North America, Europe and Australia.](https://usermanual.wiki/Faurecia-Clarion-Electronics/PF3292/User-Guide-1240972-Page-140.png)
