Feitian Technologies FTS03 ePayPOS600 User Manual ePayPOS600 Introduction

Download:
Mirror Download [FCC.gov]
Document ID	4119747
Application ID	piHlEELBly0Yrjdt0OBOnQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.35kB (354391 bits)
Date Submitted	2018-12-27 00:00:00
Date Available	2018-12-27 00:00:00
Creation Date	2018-11-16 09:58:33
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-12-27 10:03:45
Document Title	Microsoft Word - ePayPOS600 Introduction
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclks161

ePayPOS600 Introduction
V1.0
Feitian Technologies Co., Ltd.
www.FTsafe.com
ePayPOS600 Introduction
Content
Chapter 1. ePayPOS600 Product Introduction ....................................................................................................i
1.1 Product Introduction........................................................................................................................................ i
1.2 Product Appearance ........................................................................................................................................ i
1.3 Specifications .................................................................................................................................................. ii
1.3.1 Dimensions ..................................................................................................................................................................... ii
1.3.2 Keypad ............................................................................................................................................................................ ii
1.3.3 Screen ............................................................................................................................................................................ iii
1.3.4 Communication Interface .............................................................................................................................................. iii
1.3.5 Battery and Power Source ............................................................................................................................................. iii
1.3.6 Buzzer ............................................................................................................................................................................ iii
1.3.7 Contact IC card Reader .................................................................................................................................................. iii
1.3.8 Contactless IC Card Reader ............................................................................................................................................ iii
1.3.9 Magnetic Stripe Card Reader......................................................................................................................................... iii
1.3.10 LED Indicators .............................................................................................................................................................. iv
1.3.11 Features ....................................................................................................................................................................... iv
1.4 Certifications .................................................................................................................................................. iv
1.5 Compatibility ............................................................................................................................................. iv
1.6 Installation ..................................................................................................................................................... iv
1.7 FCC Statement ............................................................................................................................................. viii
Feitian Technologies Co., Ltd.
www.FTsafe.com
ii
ePayPOS600 Introduction
Chapter 1.ePayPOS600 Product Introduction
1.1 Product Introduction
Feitiane Pay POS600 is am POS product with PCIPTS4.1certification.It has a stylish and tiny design. Connect with
smart phone or tabletvia Bluetooth interface,you can easily and quickly complete the payment process.It can a
chieve payment progress any time any where which provide send users with a new experience of payment.
This product uses a brand new software structure,user can deployapplications directly on the phone or
tablet and other intelligentter minals,rapid application development,simple deployment and easy to
extend.Application can beupgraded remotely,lower the following cost of development and maintenance.
Thefeaturesofthisproduct:
Compact
The appearance is compact and portable,suitable for mobile use.
Powerful
Support magnetic stripe card,contact card and contact less card.Support Micro USB and Bluetooth.
Support iOS/Android/Windows system.
Certified
PCI4.1,EMVL1&L2,PayPass,PayWavecertified
Remoteupgrading
Firmware can be upgraded remotely,reducing the cost of late development and maintenance.
1.2 Product Appearance
The ePayPOS600 product appearanceis shown as follows:
Feitian Technologies Co., Ltd.
www.FTsafe.com
ePayPOS600 Introduction
Figure 1ePayPOS600appearance figure
1.3 Specifications
1.3.1 Dimensions
59mm(W)x12.4mm(H)x113.6mm(L)
1.3.2 Keypad
ePayPOS600hasan built‐in passwordkeyboard, thekeys aredescribedin thefollowing table.
Table1ePayPOS600keyboard
Description
Name
0~9 Number Keys
1. To inputnumbersfrom 0 to 9,amount, password,etc
2. Thenumber keys 2,8,4,6 respectively for up,down, left,right
* menu
#menu
function menu
Feitian Technologies Co., Ltd.
www.FTsafe.com
ii
ePayPOS600 Introduction
To cancel current operation
OK
To confirm currentoperation
1.3.3 Screen
Uses 128x64 LCD with backlight,supports both Chinese and English.
1.3.4 Communication Interface
MicroUSB
When the device is connected to the host(forexample,PC) through this interface,this
interface provides twofunctions such as charging and data transfer.
Bluetooth 4.2
This device can be connected to smart phone or tablet through this interface.
1.3.5 Battery and Power Source
Built‐in rechargeable(through Micro USB) lithium battery,500mAh/3.7V,with charge protection.
1.3.6 Buzzer
Notify the user by beeping when needed.
1.3.7 Contact IC card Reader
Support contact IC card(ISO/IEC7816‐1/2/3/4ChipCard),TypeA/B/C.When inserting the
ICcard, please let the chip side to ward the side of the screen.
1.3.8 Contactless IC Card Reader
Supprt contactless IC card(ISO/IEC14443TypeA,ISO/IEC14443TypeB, working frequency 13.56MHz)
1.3.9 Magnetic Stripe Card Reader
The magnetic stripe card must be compliant withISO7812standard.The magnetic strip card
reader can read data from magnetic track1,2,3 at the same time,support bi‐directional swipe,swipe
speed ranges from 10mm/s to100mm/s.The life cycle is over 300,000times.The magnetic stripe must
be backward when swiping card.
Feitian Technologies Co., Ltd.
www.FTsafe.com
iii
ePayPOS600 Introduction
1.3.10 LED Indicators
The ePayPOS600 comes with four LED indicators, respectively, red, green, yellow and blue.
1.3.11 Features

Tamper‐proof and anti‐power‐down protection;

Support DUKPT key systems

RSA、AES、3DES、SHA‐1、SHA‐256；Support RSA, AES, 3DES,SHA‐1, SHA‐256

Support SM2, SM3, SM4

Physical tamper‐proof has self‐destruction function;

Support red evelopment;
1.4 Certifications

PCI PTS 4.1 certified;

EMV L1/L2;

EMV Contactless L1;

PBOC3.0 L1/L2;

MasterCard PayPass;

Visa PayWave;
1.5 Compatibility

iOS 6.0 or later;

Android 4.3 or later;

Windows XP or late
1.6 Installation
Step 1. Charging the device
• Insert the USB charging cable into the micro‐USB socket at the bottom end of the device.
• Connect the other end of the USB charging cable into a powered USB socket.
• A charging symbol will appear over the battery symbol in the top right hand corner of the device during
Feitian Technologies Co., Ltd.
www.FTsafe.com
iv
ePayPOS600 Introduction
charging.
• Charging of the battery will typically take between 2 and 4 hours, whilst not in use.
• Battery condition is indicated in the display when the device is switched on.
• The terminal is fitted with an internal rechargeable battery which cannot be removed or replaced. This
battery should be charged for at least 3 hours when using the terminal for the first time. It is recommended that
the battery is charged to at least 40% of its capacity every 4 months.
Step 2. Turning on the device
• Hold down the power button until the display illuminates.
• If required, remove the protective film from the display.
Step 3. Mobile payment application and pairing
Please follow the instructions provided by your bank or service provider to download the mobile application
onto your mobile device and to pair it with the SPm3.
Step 4. Performing a chip card sale transaction with PIN
• When prompted, insert the customer’s chip card into the slot at the right hand side of the device with the
chip facing upwards.
• Follow the instructions provided by your bank or service provider to complete the transaction.
Step 5. Performing a magnetic stripe transaction
• During device operation you may be prompted to read a presented card by means of the magnetic stripe.
• The magnetic stripe reader is a slot positioned on the top of the device. Swipe the card in a single smooth
motion from left to right.
• Follow the instructions provided by your bank or service provider to complete the transaction.
Step 6. Performing a contactless transaction
• Transactions may be completed using a contactless card or enabled product. The device will display the
Feitian Technologies Co., Ltd.
www.FTsafe.com
ePayPOS600 Introduction
contactless symbol on the display.
• To read a contactless card it must be positioned in close proximity to the device over the contactless symbol.
Once detected the four LEDs at the top of the device will go green and there will be a confirmation beep.
• Follow the instructions provided by your bank or service provider to complete the transaction
Troubleshooting
In the unlikely event you experience issues with this product, please follow the guidelines below. If this does
not resolve the issue, please visit www.spirepayments.com or your solution provider for further assistance.
No display
• Charge the device with the supplied USB cable.
• Ensure the USB socket being used is powered.
Poor battery life
• Ensure the power is being supplied during charging.
• Check battery charge indicator is at maximum
• Charge for 2 to 4 hours to ensure a full charge whilst not in use.
Pairing problems
• Refer to pairing instructions.
Cannot read Cards
• Ensure the magnetic stripe card has been swiped in the correct orientation.
• Ensure the chip card has been inserted in the correct orientation.
• Check the contactless symbol is on the device display. Ensure the contactless card has been placed at a
distance of 0 to 4 cm from the device display.
• Test with another card of the same type.
Feitian Technologies Co., Ltd.
www.FTsafe.com
vi
ePayPOS600 Introduction
Caution and Safety Instructions
• Do not attempt to disassemble, modify, service or repair any part.
• Do not use if damaged or with signs of tampering.
• Only use the device with supplied or manufacturer‐certified accessories.
• To avoid the potential hazard of electrical shock do not use in wet environments or during an electrical
storm.
• Do not use in proximity of potentially flammable gases or substances.
• Ensure cables used do not cause a trip hazard or risk the device being dropped on to a hard surface.
• Do not expose to excessive heat or cold. Only operate between 0 °C and 40 °C.
• Before cleaning, disconnect from the electrical outlet. Use only a dry or dampened soft cloth.
• Do not immerse, use liquids, sprays or aerosol cleaners. Clean all spillages quickly.
• This device is intended for handheld use only or in an approved cradle/stand.
• Dispose any part in an environmentally sound manner and in accordance with local laws.
• Spire Payments will not be held liable for any damage resulting from user operation that does not comply
with the above‐stated guidance.
• If the device will be stored/unused for extended periods of time, then it is imperative that the battery be
recharged every six months or sooner to at least 30–40% of maximum charge while the terminal is in ‘OFF’
position.
• Only operate the Reset button if the screen is unresponsive or frozen and does not react to holding down
the power on/off key
Frequency bands
• Maximum radio frequency power transmitted in the frequency bands in which this radio equipment
operates is below the limit values specified in the corresponding Harmonized Standards.
• The frequency bands and peak power applicable to this radio equipment are: Bluetooth: 2.402 GHz – 2.480GHz
, 0dBm; NFC: 13.56 MHz.
Feitian Technologies Co., Ltd.
www.FTsafe.com
vii
ePayPOS600 Introduction
1.7 FCC Statement
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The device
can be used in portable exposure condition without restriction.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device,pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Feitian Technologies Co., Ltd.
www.FTsafe.com
viii

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclks161
Create Date                     : 2018:11:16 09:58:33+08:00
Modify Date                     : 2018:12:27 10:03:45-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - ePayPOS600 Introduction
Creator                         : baclks161
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:12:27 10:03:45-08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:cb2a63b0-ff25-4626-95e8-c01e35c60daa
Instance ID                     : uuid:2eeb1e11-1654-4a70-a43c-bed0d252080d
Page Count                      : 10

EXIF Metadata provided by EXIF.tools