Fellowes Laminator Cosmic2 125 Users Manual
Fellowes-Cosmic2-95-Laminator-With-Pouch-Starter-Kit-Users-Manual-118660 fellowes-cosmic2-95-laminator-with-pouch-starter-kit-users-manual-118660
Fellowes-Cosmic2-125-Laminator-With-Pouch-Starter-Kit-Users-Manual-118661 fellowes-cosmic2-125-laminator-with-pouch-starter-kit-users-manual-118661
Cosmic2 125 to the manual cbe9a7a0-cbc8-4a47-bf64-1826500f3827
2015-02-02
: Fellowes Fellowes-Laminator-Cosmic2-125-Users-Manual-411477 fellowes-laminator-cosmic2-125-users-manual-411477 fellowes pdf
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
Personal Laminator 3 3 E Please read these instructions before use. F Veuillez lire ces instructions avant l’utilisation. S Lea estas instrucciones antes del usarlo. 4 4 INDEX LAMINATOR CONTROLS / QUICK START GUIDE 3 ENGLISH 4-5 FRANCAIS 6-7 ESPAÑOL 8-9 LAMINATOR CONTROLS I A H D 3 4 F E G B C 3 4 QUICK START GUIDE 2 1 3 4 7 8 ” 20 3 3 4 5 6 3 9 4 4 4 3 3 11 10 3 3 4 4 12 4 3 4 3 ENGLISH E LAMINATOR CONTROLS A B C D E On / off switch Standby button & LED Pouch selection buttons ( ) Release lever ( Carry handle , 3 Mil, 4 Mil) F G H I Pouch / document entry slot Entry support shelf Pouch / document exit Cooling system vents CAPABILITIES Performance Entry width Pouch thickness (min) Pouch thickness (max) Warm up time (estimate) Cool down time Lamination speed (+/- 5%) Number of rollers Ready indication Release lever Clear Path / Anti-jam engine Cold lamination 125 = 12.5” / 318mm 95 = 9.5” / 240mm 3 Mil (per side) 4 Mil (per side) 5-6 minutes 60-90 minutes approx. 12”/min (fixed speed) 2 Light & beep Yes Yes Yes Technical Data Voltage / Frequency / Current(Amps) Wattage Dimensions (HxWxD) Net weight Max document thickness (laminating capacity) 125 = 110-120V AC, 60Hz, 4.2A 95 = 110-120V AC, 60Hz, 3.5A 125 = 480 Watts 95 = 430 Watts 125 = 4.3” x 22.4” x 6.1” 95 = 4.3” x 17.7” x 5.7” 125 = 4.4lb 95 = 3.7lb .040” / 1 mm IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE - The machine is for indoor use only. Plug the machine into an easily accessible socket. - To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket. DO ensure the machine is on a stable surface. DO test laminate scrap sheets and set the machine before final laminations. DO remove staples and other metal articles prior to laminating. DO keep the machine away from heat and water sources. DO turn off the machine after each use. DO unplug the machine when not in use for an extended period. DO use pouches designed for use at the appropriate settings. DO keep away from pets, while in use. DO ensure self-adhesive pouches are only used with the cold setting. DO NOT leave the power cord in contact with hot surfaces. DO NOT leave power cord hanging from cupboards or shelves. DO NOT use appliance if the power cord is damaged. DO NOT attempt to open or otherwise repair the machine. DO NOT exceed the machines quoted performance. DO NOT allow children to use this machine without adult supervision. DO NOT laminate sharp or metal objects (eg: staples, paper clips). DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot settings. DO NOT laminate with self-adhesive pouches on hot settings. DO NOT laminate an empty pouch. FEATURES & TIPS ‘Safe Start’ function When switched on, the machine has a default ‘Safe Start’ function which is set to the cold pouch setting. You may select other hot temperature settings if required. The machine will warm-up and alert the user when it is ready. 4 • Always put the item to be laminated into the appropriate sized pouch. • Always test laminate with a similar size and thickness before final process. • ‘Release’ function To remove or re-align a pouch during lamination, activate the release lever located at the rear of the machine. The pouch can only be removed from the entry slot when the lever is activated. Prepare pouch and item for lamination. Place item within pouch centered and touching the leading sealed edge. Ensure the pouch is not too large for the item. • If required, trim excess material from around the item after lamination and cooling. • For best results, use Fellowes ® brand pouches: 3 Mil and 4 Mil. • When working with different pouch thickness’ (temperature settings) it is recommended to first start with the thinnest pouches. • For self-adhesive (cold pouches) only use the cold setting. • This machine does not need a carrier to laminate. It is a carrier-free mechanism. SETTING UP THE LAMINATOR 1. Ensure the machine is on a stable surface. 2. 3. Plug the machine into an easily accessible main socket. 9. Place the document into the open pouch. Ensure the document is centered against the sealed edge. Use the appropriate pouch size for the document. 10. Ensure the pouch enters the machine sealed edge first. Keep the pouch straight and central within the slot, not on an angle. Use the entry markings as a guide. 11. Upon exit, the laminated pouch may be hot and soft. To prevent jamming remove the pouch immediately. Place pouch on to a flat surface to cool. Take care when handling a hot pouch. 12. To release a pouch during lamination, activate the release lever located at the rear of the machine. Gently pull pouch out of machine. Check there is enough clear space (min 20”) behind the machine to allow items to pass through freely. HOW TO LAMINATE 4. Switch the power on (located at the rear of the machine). 5. The ‘Safe Start’ function will automatically select the cold setting. 6. For cold lamination, select the cold setting only. 7. For hot lamination, choose the pouch thickness setting as required. The ‘Wait’ symbol will flash during warm-up or cool-down periods. 8. When the machine is ready, the flashing ‘Wait’ symbol will stop flashing and remain on. A signal will sound. NEED HELP? Let our experts help you with a solution. Customer Service... www.fellowes.com Always call Fellowes before contacting your place of purchase, see the rear cover for contact details. TROUBLESHOOTING Problem Possible cause Solution No control panel illumination Machine not switched on Switch on machine at rear next to plug inlet and at the wall socket Item may be too thick to laminate Check pass through thickness is correctly selected and pass through again Temperature setting may be incorrect Check pouch thickness is correctly selected and pass through again Pouch has waves or bubbles Temperature setting may be incorrect Check pouch thickness is correctly selected and pass through again Pouch is lost in the machine Pouch is jammed Pouch does not completely seal the item Pouch was used ‘open end’ first Jamming Pouch was not centered on entry Operate the release lever and pull out the item by hand Pouch was not straight upon entry Empty pouch was used Pouch is damaged after lamination Damaged rollers or adhesive on rollers Pass cleaning sheets through the machine to test and clean rollers STORAGE & CLEANING Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order codes #5320603) 5 FRANÇAIS F LES COMMANDES DE LA PLASTIFIEUSE A B C D E Interrupteur Marche / Arrêt Bouton Veille & DEL Boutons de sélection des pochettes ( ) Levier de libération ( Poignée de transport , 3 Mil, 4 Mil) F G H I Logement d'entrée des pochettes / documents Étiquette de support d'entrée Sortie des pochettes / documents Orifices de ventilation du système de refroidissement CAPACITÉS Performance Largeur d'entrée Épaisseur des pochettes (min) Épaisseur des pochettes (max) Temps d'échauffement (estimé) Temps de refroidissement Vitesse de plastification (+/- 5 %) Nombre de rouleaux Indication Prêt Levier de libération Moteur de chemin dégagé / anti-bourrage 125 = 12.5 po / 318 mm 95 = 9,5 po / 240 mm 3 Mil (par côté) 4 Mil (par côté) 5-6 minutes 60-90 minutes env. 12 po/min (vitesse fixe) 2 Voyant & bip Oui Oui Plastification à froid Oui Spécifications techniques Tension / Fréquence / Courant (Ampères) 125 = 110-120 V CA, 60 Hz, 4,2A 95 = 110-120 V CA, 60 Hz, 3,5A Courant 125 = 480 Watts 95 = 430 Watts Dimensions (HxLxP) 125 = 4,3 po x 22,4 po x 6,1 po 95 = 4,3 po x 17,7 po x 5,7 po Poids net 125 = 4,4 lb 95 = 3,7 lb Épaisseur maximale des documents (capacité de plastification) 0,040 po / 1 mm INSTRUCTIONS DE SÉCURITÉ IMPORTANTES - CONSERVER POUR UN USAGE FUTUR - La machine est réservée à un usage à l'intérieur. Brancher la machine dans une prise électrique facilement accessible. - Pour éviter tout risque d'électrocution - ne pas utiliser l'appareil près de l'eau, ne pas renverser d'eau sur l'appareil, le cordon d'alimentation ou la prise murale. IL FAUT s'assurer que l'appareil soit sur une surface stable. IL FAUT faire un essai de plastification sur des feuilles de rebut et ajuster l'appareil avant de plastifier les documents finaux. IL FAUT enlever les agrafes et autres pièces métalliques avant de plastifier. IL FAUT garder l'appareil loin de toutes sources de chaleur et d'eau. IL FAUT éteindre l'appareil après chaque usage. IL FAUT débrancher l'appareil quand il n'est pas utilisé pour une période prolongée. IL FAUT utiliser les pochettes conçues pour l'utilisation avec des réglages appropriés. IL FAUT garder l'appareil loin des animaux domestiques quand il est utilisé. IL FAUT s'assurer que les poches auto-adhésives ne sont utilisées qu'avec le réglage froid. IL NE FAUT PAS laisser le cordon d'alimentation en contact avec des surfaces chaudes. IL NE FAUT PASlaisser pendre le cordon d'alimentation des armoires ou des étagères. IL NE FAUT PAS utiliser l'appareil si le cordon d'alimentation est endommagé. IL NE FAUT PAS tenter d'ouvrir ou de réparer l'appareil. IL NE FAUT PAS dépasser les caractéristiques de fonctionnement citées de l'appareil. IL NE FAUT PAS laisser les jeunes enfants utiliser cette machine sans la supervision d'un adulte. IL NE FAUT PAS plastifier des objets coupants ou métalliques (ex : agrafes, trombones). IL NE FAUT PAS plastifier des documents sensibles à la chaleur (ex : billets, ultratsons, etc.) sur des supports chauds. IL NE FAUT PAS plastifier à l'aide de poches auto-adhésives sur des supports chauds. IL NE FAUT PAS plastifier une pochette vide. CARACTÉRISTIQUES & CONSEILS Fonction « Démarrage sécurisé » Lorsqu'elle est activée, la machine possède une fonction de démarrage sécurisé par défaut qui est définie sur le réglage Froid. Vous pouvez choisir des réglages de température chaude au besoin. La machine chauffe et avertit l'utilisateur lorsqu'elle est prête. Fonction « Libération » Pour retirer ou réaligner une pochette en cours de plastification, utilisez le levier de libération situé à l'arrière de la machine. La pochette ne peut être retirée du logement d'entrée que lorsque ce levier est actionné. 6 • Pour de meilleurs résultats, utilisez les pochettes de marque Fellowes® : 3 Mil et 4 Mil. • Pour les pochettes auto-adhésives (à froid), utilisez exclusivement le réglage froid. • Cette machine n'a pas besoin de carton transporteur pour plastifier. Il s'agit d'un mécanisme sans carton transporteur. • Placez toujours l'article à plastfier dans une pochette de taille appropriée. • Faites toujours un essai de plastification avec les mêmes dimensions et épaisseur avant de procéder avec les documents finaux. • Préparez la pochette et l'article à plastifier. Placez l'article au centre de la pochette et appuyez sur le bord scellé avant. Assurez-vous que la pochette n'est pas trop grande pour l'article. • Si nécessaire, coupez le matériel excédentaire autour du document après la plastification et le refroidissement. • Lorsque vous travaillez avec des pochettes d'épaisseurs différentes (nécessitant des températures différentes), il est recommandé de commencer par les pochettes les plus fines. INSTALLATION DE LA PLASTIFIEUSE 1. Assurez-vous que la machine est sur une surface stable. 2. Branchez l'appareil dans une prise électrique facilement accessible. 9. Placez le document dans la pochette ouverte. Assurez-vous que le document est bien placé contre le bord scellé. Utilisez une pochette de la taille adaptée au document. 10. Assurez-vous que la pochette entre dans la machine par le bord scellé en premier. Gardez la pochette droite et bien centrée dans l'ouverture, et non pliée. Utilisez les marquages d'entrée comme guide. 11. À la sortie, la pochette plastifiée peut être chaude et souple. Pour éviter les bourrages, retirez immédiatement la pochette. Placez la pochette sur une surface plate et laissez-la refroidir. Soyez prudent lorsque vous manipulez une pochette chaude. 12. Pour retirer une pochette en cours de plastification, utilisez le levier de libération situé à l'arrière de la machine. Tirez doucement la pochette hors de la machine. Vérifiez qu'il y ait suffisamment d'espace libre (20 po minimum) derrière la machine pour permettre les articles de passer librement. COMMENT PLASTIFIER 4. Mettez en marche (interrupteur situé à l'arrière de l'appareil). 5. La fonction de démarrage sécurisé sélectionne automatiquement le réglage à froid. 6. Pour la plastification à froid, sélectionnez le réglage froid uniquement. 7. Pour la plastification à chaud, choisissez le paramètre d'épaisseur de pochette requis. Le symbole « Patienter » clignote pendant le temps de réchauffement et de refroidissement. 8. 3. Lorsque la machine est prête, le symbole « Patienter » cesse de clignoter et reste allumé. Un signal sonore est audible. VOUS AVEZ BESOIN D'AIDE ? Laissez nos experts vous aider avec une solution. Service clientèle... www.fellowes.com Veuillez toujours appeler Fellowes avant de contacter le magasin. Voir à l'arrière du couvercle pour les coordonnés. DÉPANNAGE Problème Cause possible Solution Pas d'éclairage du panneau de commande Machine hors tension Mettez la machine sous tension à l'aide de l'interrupteur situé à l'arrière, près de la prise d'alimentation, et assurez-vous que le cordon d'alimentation est relié à la prise murale Il est possible que l'objet soit trop épais pour être plastifié Vérifiez que l'épaisseur est correctement sélectionnez et renouvelez l'opération Le réglage de température n'est peutêtre pas correct Vérifiez que l'épaisseur de pochette est correctement sélectionnée et renouvelez l'opération La pochette présente des ondulations ou des bulles d'air Le réglage de température n'est peutêtre pas correct Vérifiez que l'épaisseur de pochette est correctement sélectionnée et renouvelez l'opération La pochette s'est égarée dans la machine La pochette a provoqué un bourrage La pochette ne scelle pas complètement l'objet La pochette a été insérée côté ouvert en avant Bourrage La pochette n'était pas centrée à l'entrée Actionnez le levier de libération et retirez l'objet à la main La pochette n'était pas droite à l'entrée Une pochette vide a été utilisée La pochette est endommagée après la plastification Rouleaux endommagés ou adhésif sur les rouleaux Passez des feuilles de nettoyage dans la machine pour tester et nettoyer les rouleaux ENTREPOSAGE & NETTOYAGE Débranchez la machine de la prise murale. Attendre que la machine se refroidisse. L'extérieur de la machine peut être nettoyé avec un linge humide. N'utilisez pas de solvants ou de matières inflammables pour nettoyer l'appareil. Des feuilles de nettoyage peuvent être utilisées avec l'appareil. Quand la machine est chaude - insérez les feuilles de nettoyage dans celle-ci pour nettoyer les rouleaux de tout résidu. Pour des performances optimales, il est recommandé d'utiliser régulièrement des feuilles de nettoyage sur la machine. (Codes de commande des feuilles de nettoyage N° 5320603) 7 ESPAÑOL S CONTROLES DE LA PLASTIFICADORA A B C D E Interruptor de encendido/apagado Botón de espera y LED Botones de selección de bolsa ( , 3 Mil, 4 Mil) ) Palanca de liberación ( Asa de desplazamiento F G H I Ranura de entrada de bolsa / documento Bandeja de soporte de entrada Salida de bolsa / documento Aberturas del sistema de enfriamiento CARACTERÍSTICAS Rendimiento Ancho de entrada Grosor de la bolsa (mínimo) Grosor de la bolsa (máximo) Tiempo de calentamiento (estimado) Tiempo de enfriamiento Velocidad de plastificado (+/- 5%) Número de rodillos Indicador de Listo Palanca de liberación Clear Path / motor antiatasco Plastificado en frío 125 = 12,5” / 318 mm 95 = 9,5” / 240 mm 3 Mil (por lado) 4 Mil (por lado) 5 a 6 minutos 60 a 90 minutos aprox. 12”/min. (velocidad fija) 2 Luz y señal sonora Sí Sí Sí Información técnica Tensión / Frecuencia / Corriente (Amperios) 125 = 110-120V CA, 60Hz, 4,2A 95 = 110-120V CA, 60Hz, 3,5A Potencia 125 = 480 vatios 95 = 430 vatios Dimensiones (ancho x profundidad x altura) 125 = 4,3” x 22,4” x 6,1” 95 = 4,3” x 17,7” x 5,7” Peso neto 125 = 4,4 lb 95 = 3,7 lb Grosor máximo del documento (capacidad de plastificado) 0,040” / 1 mm INSTRUCCIONES DE SEGURIDAD IMPORTANTES - GUARDAR PARA REFERENCIA FUTURA - La máquina fue diseñada para usarse únicamente en interiores. Conecte la máquina a un tomacorriente de fácil acceso. - Para evitar una descarga eléctrica, no utilice el aparato cerca de fuentes de agua; no derrame agua sobre el aparato, el cable de alimentación o el tomacorriente. ASEGÚRESE de que la máquina se encuentre sobre una superficie estable. PRUEBE el plastificado en hojas de desecho y configure la máquina antes del plastificado final. RETIRE las grapas y otros objetos de metal antes de plastificar. MANTENGA la máquina alejada de fuentes de calor y agua. APAGUE la máquina después de cada uso. DESCONECTE la máquina del tomacorriente cuando no vaya a ser utilizada por un período prolongado. UTILICE las bolsas diseñadas para el uso con la configuración apropiada. MANTENGA la máquina alejada de mascotas cuando se esté utilizando. ASEGÚRESE de usar las bolsas autoadhesivas con la configuración en frío únicamente. NO deje el cable de alimentación en contacto con superficies calientes. NO deje el cable de alimentación colgando de armarios o repisas. NO utilice el aparato si el cable de alimentación está dañado. NO intente abrir o reparar la máquina de ninguna manera. NO supere el rendimiento previsto de la máquina. NO permita que los niños utilicen esta máquina sin la supervisión de un adulto. NO plastifique artículos afilados o de metal (p. ej., grapas, clips para papeles). NO plastifique documentos sensibles al calor (p. ej., boletos, ultrasonidos, etc.) en configuraciones en caliente. NO plastifique con bolsas autoadhesivas en configuraciones en caliente. NO plastifique una bolsa vacía. CARACTERÍSTICAS Y CONSEJOS 8 Función ‘Safe Start’ Cuando está encendida, la máquina posee una función por defecto 'Safe Start', que se programa con la configuración de bolsa en frío. Puede seleccionar otras configuraciones de temperatura en caliente si es necesario. La máquina empezará con el proceso de calentamiento y le avisará al usuario cuando esté lista. Función ‘Release’ Para quitar o volver a alinear una bolsa durante el plastificado, accione la palanca de liberación que se encuentra ubicada en la parte posterior de la máquina. La bolsa se podrá retirar de la ranura de entrada únicamente cuando la palanca esté accionada. • Esta máquina no necesita un transporte para plastificar. Es un mecanismo sin transporte. • Siempre coloque el documento a plastificar en la bolsa de tamaño adecuado. • Pruebe siempre el plastificado con un tamaño y grosor similares antes del proceso final. • Prepare la bolsa y el artículo a plastificar. Coloque el objeto centrado en la bolsa, tocando el extremo cerrado de la misma. Asegúrese de que la bolsa no sea demasiado grande para el objeto. • Para obtener mejores resultados, utilice las bolsas Fellowes®: 3 Mil y 4 Mil. • Si es necesario, retire el exceso de material alrededor del objeto tras el plastificado y el enfriamiento. • Para las bolsas autoadhesivas (en frío) utilice únicamente la configuración en frío. • Cuando trabaje con diferentes grosores de bolsa (configuraciones de temperatura), se recomienda comenzar primero con las bolsas más delgadas. CONFIGURAR LA PLASTIFICADORA 1. Asegúrese de que la máquina esté sobre una superficie estable. 2. 3. Conecte la máquina a un tomacorriente de fácil acceso. 9. Coloque el documento en la bolsa abierta. Asegúrese de que el documento esté centrado contra el extremo sellado. Use el tamaño de bolsa adecuado para el documento. 10. Asegúrese de que la bolsa entre a la máquina con el extremo sellado primero. Mantenga la bolsa derecha y centrada dentro de la ranura, no en forma diagonal. Use las marcas de entrada como guía. Compruebe que haya suficiente espacio (mínimo 20 pulg.) detrás de la máquina para permitir que los objetos pasen cómodamente. CÓMO PLASTIFICAR 4. Encienda la máquina (el interruptor de encendido está ubicado en la parte posterior de la máquina). 5. La función ‘Safe Start’ seleccionará en forma automática la configuración en frío. 6. Para el plastificado en frío, seleccione la configuración en frío únicamente. 7. Para el plastificado en caliente, seleccione la configuración de grosor de bolsa, según sea necesario. El símbolo ‘Wait’ parpadeará durante los períodos de calentamiento o enfriamiento. 11. Cuando sale, la bolsa plastificada puede estar caliente y blanda. Para prevenir un atasco, retire inmediatamente la bolsa. Coloque la bolsa en una superficie lisa para que se enfríe. Tenga cuidado cuando manipule una bolsa caliente. 8. Cuando la máquina esté lista, el símbolo ‘Wait’ dejará de parpadear, la luz quedará fija y sonará una alerta. 12. Para retirar una bolsa durante el plastificado, accione la palanca de liberación que se encuentra ubicada en la parte posterior de la máquina. Retire la bolsa de la máquina con cuidado. ¿NECESITA AYUDA? Deje que nuestros expertos lo ayuden con una solución. Servicio de Atención al Cliente... www.fellowes.com Siempre llame a Fellowes antes de ponerse en contacto con el lugar de la compra. Consulte la cubierta trasera para obtener los detalles de contacto. RESOLUCIÓN DE PROBLEMAS Problema Posible causa Solución El panel de control no se ilumina La máquina no está encendida Encienda la máquina en la parte posterior junto a la entrada del cable y al tomacorriente de la pared Es posible que el artículo sea demasiado grueso para ser plastificado Revise que el grosor esté correctamente seleccionado y páselo de nuevo La configuración de temperatura puede ser incorrecta Revise que el grosor de la bolsa esté correctamente seleccionado y páselo de nuevo La bolsa tiene ondas o burbujas La configuración de temperatura puede ser incorrecta Revise que el grosor de la bolsa esté correctamente seleccionado y páselo de nuevo La bolsa se ha perdido en la máquina La bolsa está atascada La bolsa no sella el artículo por completo Se introdujo primero el ‘extremo abierto’ de la bolsa Atascos La bolsa no estaba bien centrada cuando Accione la palanca de liberación y retire el artículo con la mano se la introdujo en la máquina La bolsa no estaba derecha cuando se la introdujo en la máquina Se utilizó una bolsa vacía Después del plastificado, la bolsa queda dañada Los rodillos están dañados o tienen adhesivo Pase toallitas limpiadoras por la máquina para comprobar el correcto funcionamiento y la limpieza de los rodillos ALMACENAMIENTO Y LIMPIEZA Desconecte la máquina del tomacorriente. Deje enfriar la máquina. Se puede limpiar la parte exterior de la máquina con un trapo húmedo. No utilice disolventes ni materiales inflamables para limpiar la máquina. Se pueden utilizar toallitas limpiadoras en la máquina. Cuando la máquina esté todavía caliente, pase las toallitas por la máquina para limpiar los residuos de los rodillos. Para un desempeño óptimo, se recomienda que las toallitas limpiadoras se usen regularmente para limpiar la máquina. (Toallitas limpiadoras - código de pedido #5320603) 9 PRODUCT REGISTRATION / WORLDWIDE WARRANTY Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer. Fellowes garantit que toutes les pièces de la plastifieuse sont exemptes de toute défectuosité de matériel et de fabrication pendant 2 ans à compter de la date d’achat par le consommateur initial. Si une pièce s’avère défectueuse durant la période de garantie, votre seul recours sera la réparation ou le remplacement de la pièce défectueuse, et ce, à la discrétion et aux frais de Followes. Cette garantie ne couvre pas les cas de mauvais usage, mauvaise manipulation ou réparation non autorisée. Toute garantie implicite, y compris la qualité marchande ou l’adaptation à un usage particulier, est limitée dans sa durée à la période de garantie appropriée, tel qu’établi ci-dessus. En aucun cas, Fellowes ne sera tenue responsable pour tout dommage consécutif ou accessoire attribuable à ce produit. Cette garantie vous donne des droits légaux spécifiques. Vous pourriez avoir d’autres droits légaux différents de cette garantie. La durée, les modalités et conditions de cette garantie sont valables dans le monde entier, sauf dans le cas de différentes limites, restrictions ou conditions qui peuvent être requises par les lois d’intérêt local. Pour de plus amples renseignements ou pour obtenir des services sous cette garantie, veuillez contacter Fellowes ou votre concessionnaire. Fellowes garantiza durante 2 años desde la fecha de compra del consumidor original que todas las partes de la plastificadora carecen de defectos materiales y de fabricación. Si durante dicho período de garantía se observase que alguna pieza es defectuosa, la única y exclusiva solución será la reparación o sustitución gratuita de la misma, a discreción y por cuenta de Fellowes. Esta garantía no cubrirá en caso de abuso, mala utilización o reparación no autorizada. Toda garantía implícita, incluida la de comerciabilidad o idoneidad para un fin concreto, queda limitada por la presente a la duración del período de garantía pertinente establecido más arriba. En ningún caso, Fellowes se hará responsable de cualquier daño consecuente atribuible a este producto. Esta garantía le otorga derechos legales específicos. Es posible que le asistan otros derechos legales además de los de esta garantía. La duración, términos y condiciones de esta garantía son válidos en todo el mundo, excepto cuando las leyes locales puedan exigir limitaciones, restricciones o condiciones diferentes. Para obtener más detalles o para obtener los servicios previstos en esta garantía, comuníquese con Fellowes o con su distribuidor. FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. MODIFICATIONS Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or by Industry Canada to operate this equipment. Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/ou par Industrie Canada de faire fonctionner cet équipement. Fellowes Australia +61-3-8336-9700 Malaysia +60-(0)-35122-1231 Benelux +31-(0)-76-523-2090 Polska +48-(22)-205-2100 Canada +1-905-475-6320 Russia +7-(495)-228-14-03 Deutschland +49-(0)-5131-49770 Singapore España / Portugal + 34 902 33 55 69 United Kingdom France +33-(0)-1-78-64-91-00 Italia +65-6221-3811 +44-(0)-1302-836836 United States +1-630-893-1600 +39-71-730041 Japan +81-(0)-3-5496-2401 Korea +82-(0)-2-3462-2844 1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600 Australia Polska Italia Canada Singapore Korea Deutschland Benelux Russia France China United Kingdom 2011 Fellowes, Inc. Part No. 405072 fellowes.com Japan España United States
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19 Create Date : 2011:07:04 11:18:35+01:00 Modify Date : 2011:07:28 10:24:03-05:00 Metadata Date : 2011:07:28 10:24:03-05:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7090 bytes, use -b option to extract) Instance ID : uuid:f7cea49b-af07-6049-bb01-82cc60b9e5c8 Document ID : xmp.did:986E6450FAA3E011A5BAF2C9E1379140 Original Document ID : adobe:docid:indd:1206b36d-595e-11dd-8409-cd852bcedd0a Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:976E6450FAA3E011A5BAF2C9E1379140 Derived From Document ID : xmp.did:332F7C2823A3E011B326810735B2B905 Derived From Original Document ID: adobe:docid:indd:1206b36d-595e-11dd-8409-cd852bcedd0a Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:631E230D5F8ADF11976A8112F899C243, xmp.iid:641E230D5F8ADF11976A8112F899C243, xmp.iid:651E230D5F8ADF11976A8112F899C243, xmp.iid:661E230D5F8ADF11976A8112F899C243, xmp.iid:671E230D5F8ADF11976A8112F899C243, xmp.iid:681E230D5F8ADF11976A8112F899C243, xmp.iid:691E230D5F8ADF11976A8112F899C243, xmp.iid:6A1E230D5F8ADF11976A8112F899C243, xmp.iid:91F27E6C808ADF11976A8112F899C243, xmp.iid:92F27E6C808ADF11976A8112F899C243, xmp.iid:93F27E6C808ADF11976A8112F899C243, xmp.iid:94F27E6C808ADF11976A8112F899C243, xmp.iid:95F27E6C808ADF11976A8112F899C243, xmp.iid:96F27E6C808ADF11976A8112F899C243, xmp.iid:97F27E6C808ADF11976A8112F899C243, xmp.iid:98F27E6C808ADF11976A8112F899C243, xmp.iid:BD1108639A94DF11946CDF28292ADEC0, xmp.iid:BE1108639A94DF11946CDF28292ADEC0, xmp.iid:BF1108639A94DF11946CDF28292ADEC0, xmp.iid:C01108639A94DF11946CDF28292ADEC0, xmp.iid:C11108639A94DF11946CDF28292ADEC0, xmp.iid:C21108639A94DF11946CDF28292ADEC0, xmp.iid:C31108639A94DF11946CDF28292ADEC0, xmp.iid:C41108639A94DF11946CDF28292ADEC0, xmp.iid:F88D0016D494DF11AB77E5C2A3EE6FE7, xmp.iid:F98D0016D494DF11AB77E5C2A3EE6FE7, xmp.iid:936FF3E76595DF11B61CF837E8B27569, xmp.iid:946FF3E76595DF11B61CF837E8B27569, xmp.iid:956FF3E76595DF11B61CF837E8B27569, xmp.iid:966FF3E76595DF11B61CF837E8B27569, xmp.iid:976FF3E76595DF11B61CF837E8B27569, xmp.iid:986FF3E76595DF11B61CF837E8B27569, xmp.iid:996FF3E76595DF11B61CF837E8B27569, xmp.iid:9A6FF3E76595DF11B61CF837E8B27569, xmp.iid:9B6FF3E76595DF11B61CF837E8B27569, xmp.iid:9C6FF3E76595DF11B61CF837E8B27569, xmp.iid:5FE9E2076996DF11A976C67A5010BA49, xmp.iid:60E9E2076996DF11A976C67A5010BA49, xmp.iid:CC6E6DEF8398DF11A8C1C81C82A45D70, xmp.iid:CD6E6DEF8398DF11A8C1C81C82A45D70, xmp.iid:CE6E6DEF8398DF11A8C1C81C82A45D70, xmp.iid:CF6E6DEF8398DF11A8C1C81C82A45D70, xmp.iid:D06E6DEF8398DF11A8C1C81C82A45D70, xmp.iid:0F83C3F434A1DF118D7EB388155FA86C, xmp.iid:1083C3F434A1DF118D7EB388155FA86C, xmp.iid:1783C3F434A1DF118D7EB388155FA86C, xmp.iid:9BD2643C3EA1DF118D7EB388155FA86C, xmp.iid:9CD2643C3EA1DF118D7EB388155FA86C, xmp.iid:9DD2643C3EA1DF118D7EB388155FA86C, xmp.iid:9ED2643C3EA1DF118D7EB388155FA86C, xmp.iid:9FD2643C3EA1DF118D7EB388155FA86C, xmp.iid:A0D2643C3EA1DF118D7EB388155FA86C, xmp.iid:A1D2643C3EA1DF118D7EB388155FA86C, xmp.iid:A2D2643C3EA1DF118D7EB388155FA86C, xmp.iid:A3D2643C3EA1DF118D7EB388155FA86C, xmp.iid:DD38956449A1DF118D7EB388155FA86C, xmp.iid:DE38956449A1DF118D7EB388155FA86C, xmp.iid:DF38956449A1DF118D7EB388155FA86C, xmp.iid:E038956449A1DF118D7EB388155FA86C, xmp.iid:E138956449A1DF118D7EB388155FA86C, xmp.iid:456A4D256BA1DF118FE7DC81A46AF0C7, xmp.iid:4B10378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:4C10378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:4D10378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:4E10378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:4F10378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:5010378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:5110378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:5210378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:5310378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:5410378ABBA3DF1197A0EAB7F4F0F12F, xmp.iid:D4E0D1ABC0A3DF1197A0EAB7F4F0F12F, xmp.iid:D5E0D1ABC0A3DF1197A0EAB7F4F0F12F, xmp.iid:D6E0D1ABC0A3DF1197A0EAB7F4F0F12F, xmp.iid:5CD4E6FECAA3DF11B4B3C40DC27C543F, xmp.iid:5DD4E6FECAA3DF11B4B3C40DC27C543F, xmp.iid:5ED4E6FECAA3DF11B4B3C40DC27C543F, xmp.iid:E275F58D5AA4DF1183AFBFAEAE58AB13, xmp.iid:E375F58D5AA4DF1183AFBFAEAE58AB13, xmp.iid:E475F58D5AA4DF1183AFBFAEAE58AB13, xmp.iid:E875F58D5AA4DF1183AFBFAEAE58AB13, xmp.iid:E975F58D5AA4DF1183AFBFAEAE58AB13, xmp.iid:EDD9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:EED9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:F0D9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:F1D9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:F3D9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:F4D9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:F5D9147A65A4DF1183AFBFAEAE58AB13, xmp.iid:9294A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9394A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9494A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9694A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9794A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9994A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9A94A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9B94A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9C94A2336FA4DF1183AFBFAEAE58AB13, xmp.iid:9D95A92875A4DF1183AFBFAEAE58AB13, xmp.iid:9E95A92875A4DF1183AFBFAEAE58AB13, xmp.iid:9F95A92875A4DF1183AFBFAEAE58AB13, xmp.iid:A095A92875A4DF1183AFBFAEAE58AB13, xmp.iid:A195A92875A4DF1183AFBFAEAE58AB13, xmp.iid:A295A92875A4DF1183AFBFAEAE58AB13, xmp.iid:CF251D5F62A5DF11AF9ECD2F58DB9A41, xmp.iid:C304A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:C404A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:C504A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:C704A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:C804A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:CA04A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:CB04A8ABE6A5DF1197F790EB4DEDC9F6, xmp.iid:532C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:542C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:552C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:572C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:582C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:592C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:5A2C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:5C2C1E39EAA5DF1197F790EB4DEDC9F6, xmp.iid:2689247AF4A5DF11AF5D818647DA82EA, xmp.iid:2789247AF4A5DF11AF5D818647DA82EA, xmp.iid:2889247AF4A5DF11AF5D818647DA82EA, xmp.iid:2989247AF4A5DF11AF5D818647DA82EA, xmp.iid:2A89247AF4A5DF11AF5D818647DA82EA, xmp.iid:2B89247AF4A5DF11AF5D818647DA82EA, xmp.iid:70329C8230A6DF11BD39A05A146D7580, xmp.iid:0E49074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:0F49074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1049074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1149074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1249074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1349074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1449074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1549074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1649074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:1749074BB7A6DF11B9EBE5DD4173B90B, xmp.iid:23E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:24E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:25E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:26E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:27E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:28E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:29E87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:2AE87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:2BE87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:2CE87571CAA6DF11B9EBE5DD4173B90B, xmp.iid:826B2B81F4A6DF118F8ACC053053BB5C, xmp.iid:80AA7D6579A7DF118E21AB0C19E5933F, xmp.iid:B9EB1FFAE0A9DF11A0A9FA85E239B160, xmp.iid:6D6339DCEBB4DF11B176AB684FF25218, xmp.iid:A205EAFC68B6DF1189CADDDF1B5EFBC4, xmp.iid:A305EAFC68B6DF1189CADDDF1B5EFBC4, xmp.iid:A405EAFC68B6DF1189CADDDF1B5EFBC4, xmp.iid:A505EAFC68B6DF1189CADDDF1B5EFBC4, xmp.iid:0CFDCA5E9BB9DF1189D6D55CB524039B, xmp.iid:0B3A0D7A59BADF11815FC1FC2BB27230, xmp.iid:0C3A0D7A59BADF11815FC1FC2BB27230, xmp.iid:0D3A0D7A59BADF11815FC1FC2BB27230, xmp.iid:0E3A0D7A59BADF11815FC1FC2BB27230, xmp.iid:0F3A0D7A59BADF11815FC1FC2BB27230, xmp.iid:103A0D7A59BADF11815FC1FC2BB27230, xmp.iid:113A0D7A59BADF11815FC1FC2BB27230, xmp.iid:123A0D7A59BADF11815FC1FC2BB27230, xmp.iid:B3539E7773BADF11BC1897DAA29925A4, xmp.iid:B4539E7773BADF11BC1897DAA29925A4, xmp.iid:B5539E7773BADF11BC1897DAA29925A4, xmp.iid:B6539E7773BADF11BC1897DAA29925A4, xmp.iid:C56D9EF09ABADF11B364E552563E4056, xmp.iid:7EDB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:7FDB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:80DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:81DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:82DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:83DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:84DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:85DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:86DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:87DB9EE482CFDF119861D2CDAD1A0E31, xmp.iid:F8DD6B06ADCFDF119861D2CDAD1A0E31, xmp.iid:F9DD6B06ADCFDF119861D2CDAD1A0E31, xmp.iid:FADD6B06ADCFDF119861D2CDAD1A0E31, xmp.iid:FBDD6B06ADCFDF119861D2CDAD1A0E31, xmp.iid:FCDD6B06ADCFDF119861D2CDAD1A0E31, xmp.iid:0D30876CB4CFDF11B7B7C9985FD7431E, xmp.iid:7F794D7BC8CFDF11A9B5BC775DE18C59, xmp.iid:82794D7BC8CFDF11A9B5BC775DE18C59, xmp.iid:84794D7BC8CFDF11A9B5BC775DE18C59, xmp.iid:85794D7BC8CFDF11A9B5BC775DE18C59, xmp.iid:4B42C2CE52D1DF11A0708B90A0D02B97, xmp.iid:4C42C2CE52D1DF11A0708B90A0D02B97, xmp.iid:F7FFC2D328D5DF11BA688A4885BC7863, xmp.iid:F8FFC2D328D5DF11BA688A4885BC7863, xmp.iid:F9FFC2D328D5DF11BA688A4885BC7863, xmp.iid:23CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:24CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:25CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:26CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:27CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:28CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:29CA1FD30DD6DF1191DFBF2DFD1D82E4, xmp.iid:41E7574F44D6DF1198D78E33C3BD0028, xmp.iid:8B6579A0D8D6DF118495FE73058727E1, xmp.iid:9CCFEA6131FDDF119C1E86520BCAE661, xmp.iid:0F6355A02102E011B18BF1666A5C20A6, xmp.iid:DCDE48CEC502E01199A2DDC4FE0090A3, xmp.iid:DDDE48CEC502E01199A2DDC4FE0090A3, xmp.iid:DEDE48CEC502E01199A2DDC4FE0090A3, xmp.iid:DFDE48CEC502E01199A2DDC4FE0090A3, xmp.iid:E0DE48CEC502E01199A2DDC4FE0090A3, xmp.iid:28B35B34D902E01189D78CE8A2440E5B, xmp.iid:0ED4CF23DF02E01192EEF9A04CBD55D9, xmp.iid:0FD4CF23DF02E01192EEF9A04CBD55D9, xmp.iid:10D4CF23DF02E01192EEF9A04CBD55D9, xmp.iid:11D4CF23DF02E01192EEF9A04CBD55D9, xmp.iid:12D4CF23DF02E01192EEF9A04CBD55D9, xmp.iid:CA9B5B23E102E011B977DB460AE4345F, xmp.iid:CB9B5B23E102E011B977DB460AE4345F, xmp.iid:CC9B5B23E102E011B977DB460AE4345F, xmp.iid:CD9B5B23E102E011B977DB460AE4345F, xmp.iid:CE9B5B23E102E011B977DB460AE4345F, xmp.iid:CF9B5B23E102E011B977DB460AE4345F, xmp.iid:D09B5B23E102E011B977DB460AE4345F, xmp.iid:D19B5B23E102E011B977DB460AE4345F, xmp.iid:D29B5B23E102E011B977DB460AE4345F, xmp.iid:D39B5B23E102E011B977DB460AE4345F, xmp.iid:4CCABD49E602E011B977DB460AE4345F, xmp.iid:4DCABD49E602E011B977DB460AE4345F, xmp.iid:4ECABD49E602E011B977DB460AE4345F, xmp.iid:4FCABD49E602E011B977DB460AE4345F, xmp.iid:50CABD49E602E011B977DB460AE4345F, xmp.iid:51CABD49E602E011B977DB460AE4345F, xmp.iid:52CABD49E602E011B977DB460AE4345F, xmp.iid:53CABD49E602E011B977DB460AE4345F, xmp.iid:54CABD49E602E011B977DB460AE4345F, xmp.iid:55CABD49E602E011B977DB460AE4345F, xmp.iid:56CABD49E602E011B977DB460AE4345F, xmp.iid:A133140AFD02E011B977DB460AE4345F, xmp.iid:A233140AFD02E011B977DB460AE4345F, xmp.iid:A333140AFD02E011B977DB460AE4345F, xmp.iid:A433140AFD02E011B977DB460AE4345F, xmp.iid:A533140AFD02E011B977DB460AE4345F, xmp.iid:A633140AFD02E011B977DB460AE4345F, xmp.iid:862FD119AD04E011A0C9E5CCCC38BBF9, xmp.iid:5656B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5756B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5856B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5956B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5A56B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5B56B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5C56B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5D56B8A9CA06E0118D37B999AD92BBC0, xmp.iid:5E56B8A9CA06E0118D37B999AD92BBC0, xmp.iid:9A88A2A3D406E0118D37B999AD92BBC0, xmp.iid:9B88A2A3D406E0118D37B999AD92BBC0, xmp.iid:9C88A2A3D406E0118D37B999AD92BBC0, xmp.iid:9D88A2A3D406E0118D37B999AD92BBC0, xmp.iid:9E88A2A3D406E0118D37B999AD92BBC0, xmp.iid:9F88A2A3D406E0118D37B999AD92BBC0, xmp.iid:A088A2A3D406E0118D37B999AD92BBC0, xmp.iid:407D81BDD806E0118F98F755762BDFEA, xmp.iid:76F1DD33D906E011ACE38563B80DB8D9, xmp.iid:77F1DD33D906E011ACE38563B80DB8D9, xmp.iid:A85101B08707E011AB6DE852168327C0, xmp.iid:4916E7732A09E011A1F1C18AB54B4785, xmp.iid:159D7E661D0CE011BD99EB16CEBAEC6B, xmp.iid:0F9AF46AB97BE0119AD79B291313FD45, xmp.iid:F3F5BF4F2B97E01186C0B375586E4D40, xmp.iid:F4F5BF4F2B97E01186C0B375586E4D40, xmp.iid:F5F5BF4F2B97E01186C0B375586E4D40, xmp.iid:F6F5BF4F2B97E01186C0B375586E4D40, xmp.iid:F7F5BF4F2B97E01186C0B375586E4D40, xmp.iid:7AA747B5EA9BE011AD7992BFB5AB254E, xmp.iid:7BA747B5EA9BE011AD7992BFB5AB254E, xmp.iid:7CA747B5EA9BE011AD7992BFB5AB254E, xmp.iid:7DA747B5EA9BE011AD7992BFB5AB254E, xmp.iid:1DDDF3ED0E9CE011999098CF048D14BF, xmp.iid:1EDDF3ED0E9CE011999098CF048D14BF, xmp.iid:4B39E1EFED9CE0118C019C50842DA1FD, xmp.iid:4C39E1EFED9CE0118C019C50842DA1FD, xmp.iid:4D39E1EFED9CE0118C019C50842DA1FD, xmp.iid:5139E1EFED9CE0118C019C50842DA1FD, xmp.iid:5239E1EFED9CE0118C019C50842DA1FD, xmp.iid:5339E1EFED9CE0118C019C50842DA1FD, xmp.iid:8C33144BEE9CE0118C019C50842DA1FD, xmp.iid:8D33144BEE9CE0118C019C50842DA1FD, xmp.iid:63403746679DE0118087E0C17A7F7EDA, xmp.iid:6D6AA03E5DA2E0118EC0D55803B07F73, xmp.iid:6E6AA03E5DA2E0118EC0D55803B07F73, xmp.iid:6F6AA03E5DA2E0118EC0D55803B07F73, xmp.iid:716AA03E5DA2E0118EC0D55803B07F73, xmp.iid:44A836325FA2E011987CDC11CF01EDD5, xmp.iid:322F7C2823A3E011B326810735B2B905, xmp.iid:332F7C2823A3E011B326810735B2B905, xmp.iid:976E6450FAA3E011A5BAF2C9E1379140, xmp.iid:986E6450FAA3E011A5BAF2C9E1379140, xmp.iid:85143B9624A6E01182B8FE75E2ACFF82 History When : 2010:07:08 09:42:18+01:00, 2010:07:08 09:42:18+01:00, 2010:07:08 10:35:04+01:00, 2010:07:08 10:38:12+01:00, 2010:07:08 10:59:05+01:00, 2010:07:08 11:04:42+01:00, 2010:07:08 11:13:31+01:00, 2010:07:08 11:55:36+01:00, 2010:07:08 12:03:22+01:00, 2010:07:08 12:08:39+01:00, 2010:07:08 12:08:46+01:00, 2010:07:08 12:08:46+01:00, 2010:07:08 12:15:01+01:00, 2010:07:08 12:18:01+01:00, 2010:07:08 13:51:04+01:00, 2010:07:08 13:56:07+01:00, 2010:07:21 08:34:25+01:00, 2010:07:21 08:34:25+01:00, 2010:07:21 11:41:38+01:00, 2010:07:21 13:20:55+01:00, 2010:07:21 13:21:04+01:00, 2010:07:21 13:21:04+01:00, 2010:07:21 13:38:32+01:00, 2010:07:21 13:59:06+01:00, 2010:07:21 15:27:26+01:00, 2010:07:21 15:32:20+01:00, 2010:07:22 08:51:16+01:00, 2010:07:22 10:41:30+01:00, 2010:07:22 12:34:22+01:00, 2010:07:22 13:25:33+01:00, 2010:07:22 13:47:26+01:00, 2010:07:22 14:08:15+01:00, 2010:07:22 14:39:07+01:00, 2010:07:22 14:40:15+01:00, 2010:07:22 15:13:27+01:00, 2010:07:22 15:18:13+01:00, 2010:07:23 15:46:09+01:00, 2010:07:23 15:56:38+01:00, 2010:07:26 08:03:46+01:00, 2010:07:26 08:03:54+01:00, 2010:07:26 08:03:54+01:00, 2010:07:26 08:40:19+01:00, 2010:07:26 09:22:53+01:00, 2010:08:06 09:56:24+01:00, 2010:08:06 10:06:38+01:00, 2010:08:06 10:26:40+01:00, 2010:08:06 10:39:42+01:00, 2010:08:06 10:47:20+01:00, 2010:08:06 10:47:55+01:00, 2010:08:06 11:16:28+01:00, 2010:08:06 11:17:15+01:00, 2010:08:06 11:18:09+01:00, 2010:08:06 11:28:33+01:00, 2010:08:06 11:30:34+01:00, 2010:08:06 11:44:01+01:00, 2010:08:06 11:57:23+01:00, 2010:08:06 12:12:38+01:00, 2010:08:06 12:15:41+01:00, 2010:08:06 12:40:17+01:00, 2010:08:06 12:41:02+01:00, 2010:08:06 15:59+01:00, 2010:08:09 14:39:31+01:00, 2010:08:09 14:39:32+01:00, 2010:08:09 14:45:18+01:00, 2010:08:09 14:52:32+01:00, 2010:08:09 14:52:32+01:00, 2010:08:09 14:53:23+01:00, 2010:08:09 14:53:23+01:00, 2010:08:09 15:13:33+01:00, 2010:08:09 15:13:43+01:00, 2010:08:09 15:13:43+01:00, 2010:08:09 15:16:15+01:00, 2010:08:09 15:34:23+01:00, 2010:08:09 15:34:23+01:00, 2010:08:09 16:30:09+01:00, 2010:08:09 16:30:15+01:00, 2010:08:09 16:30:15+01:00, 2010:08:10 09:37:48+01:00, 2010:08:10 09:37:54+01:00, 2010:08:10 09:37:54+01:00, 2010:08:10 10:25:28+01:00, 2010:08:10 10:25:28+01:00, 2010:08:10 10:55:59+01:00, 2010:08:10 10:55:59+01:00, 2010:08:10 11:03:56+01:00, 2010:08:10 11:03:56+01:00, 2010:08:10 11:16:19+01:00, 2010:08:10 11:16:24+01:00, 2010:08:10 11:16:24+01:00, 2010:08:10 12:05:35+01:00, 2010:08:10 12:05:41+01:00, 2010:08:10 12:05:41+01:00, 2010:08:10 12:12:50+01:00, 2010:08:10 12:12:50+01:00, 2010:08:10 12:23:12+01:00, 2010:08:10 12:23:42+01:00, 2010:08:10 12:23:42+01:00, 2010:08:10 12:44:12+01:00, 2010:08:10 12:48:14+01:00, 2010:08:10 12:48:14+01:00, 2010:08:10 14:25:59+01:00, 2010:08:10 15:08:10+01:00, 2010:08:10 15:11:39+01:00, 2010:08:10 15:14:12+01:00, 2010:08:11 17:06:16+01:00, 2010:08:12 08:54:01+01:00, 2010:08:12 08:54:43+01:00, 2010:08:12 08:54:43+01:00, 2010:08:12 09:02:12+01:00, 2010:08:12 09:06:40+01:00, 2010:08:12 09:07:37+01:00, 2010:08:12 09:07:37+01:00, 2010:08:12 09:23:13+01:00, 2010:08:12 09:25:10+01:00, 2010:08:12 09:27:41+01:00, 2010:08:12 10:03:43+01:00, 2010:08:12 10:03:43+01:00, 2010:08:12 10:05:51+01:00, 2010:08:12 10:06:06+01:00, 2010:08:12 10:09:25+01:00, 2010:08:12 10:32:08+01:00, 2010:08:12 10:33:20+01:00, 2010:08:12 10:35:39+01:00, 2010:08:12 10:42:47+01:00, 2010:08:12 10:45:40+01:00, 2010:08:12 10:52:32+01:00, 2010:08:12 17:41:52+01:00, 2010:08:13 09:46:41+01:00, 2010:08:13 09:48:24+01:00, 2010:08:13 09:49:42+01:00, 2010:08:13 11:49:42+01:00, 2010:08:13 11:53:32+01:00, 2010:08:13 11:58:06+01:00, 2010:08:13 12:00:20+01:00, 2010:08:13 12:01:06+01:00, 2010:08:13 12:01:06+01:00, 2010:08:13 12:03:36+01:00, 2010:08:13 14:24+01:00, 2010:08:13 14:45:22+01:00, 2010:08:13 14:52:35+01:00, 2010:08:13 15:40:53+01:00, 2010:08:13 15:46:56+01:00, 2010:08:13 15:46:56+01:00, 2010:08:13 16:44:55+01:00, 2010:08:13 16:46:05+01:00, 2010:08:13 16:48:40+01:00, 2010:08:13 16:53+01:00, 2010:08:13 17:04:51+01:00, 2010:08:14 08:56:08+01:00, 2010:08:17 10:22:37+01:00, 2010:09:01 09:19:13+01:00, 2010:09:02 09:06:28+01:00, 2010:09:02 09:48:41+01:00, 2010:09:02 09:48:41+01:00, 2010:09:02 09:55:01+01:00, 2010:09:06 10:44:40+01:00, 2010:09:07 09:25:30+01:00, 2010:09:07 09:25:32+01:00, 2010:09:07 09:58:10+01:00, 2010:09:07 10:05:22+01:00, 2010:09:07 10:20:01+01:00, 2010:09:07 12:09:19+01:00, 2010:09:07 12:09:20+01:00, 2010:09:07 12:14:21+01:00, 2010:09:07 12:31:33+01:00, 2010:09:07 12:32:33+01:00, 2010:09:07 12:32:35+01:00, 2010:09:07 12:39:24+01:00, 2010:09:07 17:14:06+01:00, 2010:10:04 07:44:53+01:00, 2010:10:04 07:44:54+01:00, 2010:10:04 08:08:04+01:00, 2010:10:04 08:24:06+01:00, 2010:10:04 09:07:10+01:00, 2010:10:04 09:18:33+01:00, 2010:10:04 09:20:59+01:00, 2010:10:04 09:22:24+01:00, 2010:10:04 09:24:22+01:00, 2010:10:04 09:36:40+01:00, 2010:10:04 12:46:28+01:00, 2010:10:04 13:25:10+01:00, 2010:10:04 13:26:30+01:00, 2010:10:04 13:26:31+01:00, 2010:10:04 13:30:55+01:00, 2010:10:04 13:39:26+01:00, 2010:10:04 16:03:01+01:00, 2010:10:04 16:19:38+01:00, 2010:10:04 17:06:35+01:00, 2010:10:04 17:07:24+01:00, 2010:10:06 15:05:43+01:00, 2010:10:06 15:05:44+01:00, 2010:10:11 12:15:17+01:00, 2010:10:11 12:15:18+01:00, 2010:10:11 16:22:23+01:00, 2010:10:12 15:34:30+01:00, 2010:10:12 15:35:04+01:00, 2010:10:12 15:35:04+01:00, 2010:10:12 15:46:29+01:00, 2010:10:12 15:48:45+01:00, 2010:10:12 16:03:38+01:00, 2010:10:12 16:22:01+01:00, 2010:10:12 22:04:32+01:00, 2010:10:13 15:46:13+01:00, 2010:12:01 12:29:09Z, 2010:12:07 16:47:06Z, 2010:12:08 12:22:21Z, 2010:12:08 12:22:22Z, 2010:12:08 12:53:56Z, 2010:12:08 12:54:06Z, 2010:12:08 12:54:06Z, 2010:12:08 14:41:13Z, 2010:12:08 15:23:42Z, 2010:12:08 15:24:02Z, 2010:12:08 15:24:02Z, 2010:12:08 15:25:04Z, 2010:12:08 15:25:05Z, 2010:12:08 15:38Z, 2010:12:08 15:40:53Z, 2010:12:08 15:42:10Z, 2010:12:08 15:53:44Z, 2010:12:08 15:57:07Z, 2010:12:08 16:02:26Z, 2010:12:08 16:05:13Z, 2010:12:08 16:05:59Z, 2010:12:08 16:07:27Z, 2010:12:08 16:08Z, 2010:12:08 16:14:52Z, 2010:12:08 16:17:46Z, 2010:12:08 16:29:35Z, 2010:12:08 16:32:30Z, 2010:12:08 16:54:07Z, 2010:12:08 16:56:36Z, 2010:12:08 16:58:05Z, 2010:12:08 17:05:58Z, 2010:12:08 17:08Z, 2010:12:08 17:08:28Z, 2010:12:08 18:41:38Z, 2010:12:08 18:57:44Z, 2010:12:08 19:01:11Z, 2010:12:08 19:08:01Z, 2010:12:08 19:08:27Z, 2010:12:08 19:11:34Z, 2010:12:08 19:36:59Z, 2010:12:10 22:30:33Z, 2010:12:13 15:07:30Z, 2010:12:13 15:07:37Z, 2010:12:13 15:07:37Z, 2010:12:13 15:12:11Z, 2010:12:13 15:22:38Z, 2010:12:13 15:34:22Z, 2010:12:13 15:36:50Z, 2010:12:13 16:12:14Z, 2010:12:13 16:12:47Z, 2010:12:13 16:18:36Z, 2010:12:13 16:21:30Z, 2010:12:13 16:25:28Z, 2010:12:13 16:29:47Z, 2010:12:13 16:31:11Z, 2010:12:13 16:38:23Z, 2010:12:13 16:42:20Z, 2010:12:13 16:47:58Z, 2010:12:13 16:51:16Z, 2010:12:13 16:56:08Z, 2010:12:14 13:40:17Z, 2010:12:16 17:20:18Z, 2010:12:20 09:42:03Z, 2011:05:11 11:28:31+01:00, 2011:06:15 09:41:49+01:00, 2011:06:15 09:41:50+01:00, 2011:06:15 10:54:18+01:00, 2011:06:15 11:03:57+01:00, 2011:06:15 12:46:28+01:00, 2011:06:21 10:41:58+01:00, 2011:06:21 10:41:58+01:00, 2011:06:21 10:42:05+01:00, 2011:06:21 10:42:05+01:00, 2011:06:21 16:03:03+01:00, 2011:06:21 16:19:56+01:00, 2011:06:22 17:37:36+01:00, 2011:06:22 17:37:57+01:00, 2011:06:22 17:37:57+01:00, 2011:06:22 17:39:29+01:00, 2011:06:22 17:39:57+01:00, 2011:06:22 17:39:57+01:00, 2011:06:22 17:53:12+01:00, 2011:06:22 17:53:49+01:00, 2011:06:23 08:06:10+01:00, 2011:06:29 15:42:25+01:00, 2011:06:29 15:42:25+01:00, 2011:06:29 15:44:39+01:00, 2011:06:29 15:48:20+01:00, 2011:06:29 15:50:56+01:00, 2011:06:30 15:32:17+01:00, 2011:06:30 15:32:17+01:00, 2011:07:01 16:53:50+01:00, 2011:07:01 16:53:50+01:00, 2011:07:04 11:01:29+01:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /metadata, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /metadata, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /metadata, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:3a9d70be-2d72-4669-b536-9f73109d71a5, uuid:c1a1a3ab-fb48-4b96-8b82-023a5463b141, uuid:04ddc81a-7752-4211-82d4-a47ac33fd10f, uuid:30811e3b-40f1-42e9-9fb6-d1e8c3f60f53, xmp.iid:3FD347D8D9B5DF119F3CD62D1E257427, xmp.iid:40D347D8D9B5DF119F3CD62D1E257427, xmp.iid:41D347D8D9B5DF119F3CD62D1E257427, uuid:f8468d1f-d337-4ce6-a7ef-6a0ca30be64e, uuid:dc305ab3-eeb0-42b2-901c-25eda08364cc, uuid:75419e30-79b6-452e-9224-a8f0c231f52a, uuid:a92b8c1d-e9bb-4973-a96f-9459a891ef99, uuid:316008e0-a3bd-479e-89e1-a093ccc4cd12, xmp.iid:46D347D8D9B5DF119F3CD62D1E257427, xmp.iid:45D347D8D9B5DF119F3CD62D1E257427, xmp.iid:47D347D8D9B5DF119F3CD62D1E257427, uuid:966263a8-d471-43dc-82de-9cc142081dee, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, xmp.iid:704AC3111754DE118ABFFB189C65EBA2, xmp.iid:724AC3111754DE118ABFFB189C65EBA2, uuid:942cd9df-3fda-4460-b593-da4651782a39, uuid:13f42dd2-f44d-4877-9ca6-3618d489f45b, uuid:1d0c0532-6b7c-42cb-a854-fa7a2d57ae54, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, xmp.iid:704AC3111754DE118ABFFB189C65EBA2, xmp.iid:724AC3111754DE118ABFFB189C65EBA2, uuid:942cd9df-3fda-4460-b593-da4651782a39, uuid:13f42dd2-f44d-4877-9ca6-3618d489f45b, uuid:1d0c0532-6b7c-42cb-a854-fa7a2d57ae54, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, xmp.iid:704AC3111754DE118ABFFB189C65EBA2, xmp.iid:724AC3111754DE118ABFFB189C65EBA2, uuid:942cd9df-3fda-4460-b593-da4651782a39, uuid:13f42dd2-f44d-4877-9ca6-3618d489f45b, uuid:1d0c0532-6b7c-42cb-a854-fa7a2d57ae54, xmp.iid:794AC3111754DE118ABFFB189C65EBA2, uuid:3a9d70be-2d72-4669-b536-9f73109d71a5 Manifest Reference Document ID : xmp.did:60E390040103E011A7DDB9A9BCE14463, xmp.did:67BDBECE10D6DF11B81E8E9D70320F69, xmp.did:DD73D5BE82CFDF11A213BD4082B2194C, xmp.did:68BDBECE10D6DF11B81E8E9D70320F69, xmp.did:3FD347D8D9B5DF119F3CD62D1E257427, xmp.did:40D347D8D9B5DF119F3CD62D1E257427, xmp.did:41D347D8D9B5DF119F3CD62D1E257427, xmp.did:843FB57457BADF118E3CA2045F028B7A, xmp.did:803FB57457BADF118E3CA2045F028B7A, xmp.did:DF73D5BE82CFDF11A213BD4082B2194C, xmp.did:E073D5BE82CFDF11A213BD4082B2194C, xmp.did:E173D5BE82CFDF11A213BD4082B2194C, xmp.did:46D347D8D9B5DF119F3CD62D1E257427, xmp.did:45D347D8D9B5DF119F3CD62D1E257427, xmp.did:47D347D8D9B5DF119F3CD62D1E257427, xmp.did:7F3FB57457BADF118E3CA2045F028B7A, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:704AC3111754DE118ABFFB189C65EBA2, xmp.did:724AC3111754DE118ABFFB189C65EBA2, xmp.did:DC73D5BE82CFDF11A213BD4082B2194C, xmp.did:12B56BFAE6B4DF11ADA6C31896131626, xmp.did:DB73D5BE82CFDF11A213BD4082B2194C, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:704AC3111754DE118ABFFB189C65EBA2, xmp.did:724AC3111754DE118ABFFB189C65EBA2, xmp.did:DC73D5BE82CFDF11A213BD4082B2194C, xmp.did:12B56BFAE6B4DF11ADA6C31896131626, xmp.did:DB73D5BE82CFDF11A213BD4082B2194C, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:704AC3111754DE118ABFFB189C65EBA2, xmp.did:724AC3111754DE118ABFFB189C65EBA2, xmp.did:DC73D5BE82CFDF11A213BD4082B2194C, xmp.did:12B56BFAE6B4DF11ADA6C31896131626, xmp.did:DB73D5BE82CFDF11A213BD4082B2194C, xmp.did:794AC3111754DE118ABFFB189C65EBA2, xmp.did:60E390040103E011A7DDB9A9BCE14463 Doc Change Count : 8764 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 11 Creator : Adobe InDesign CS4 (6.0.6)EXIF Metadata provided by EXIF.tools