Fellowes Powershred 73Ci Users Manual
Fellowes-Powershred-73Ci-100-Jam-Proof-Cross-Cut-Shredder-Users-Manual-118546 fellowes-powershred-73ci-100-jam-proof-cross-cut-shredder-users-manual-118546
73Ci to the manual ef4c54f5-bc6a-41bd-9594-21caf54cc23d
2015-02-02
: Fellowes Fellowes-Powershred-73Ci-Users-Manual-411694 fellowes-powershred-73ci-users-manual-411694 fellowes pdf
Open the PDF directly: View PDF .
Page Count: 5
Quality Office Products Since 1917
POWERSHRED® 73Ci
Please read these instructions before use.
Do not discard: keep for future reference.
ENGLISH
Model 73Ci
Will shred: Paper, credit cards, staples, small paper clips and CD/DVDs
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted
above
Paper shred size:
Cross-Cut ...................................................................5/32 in. x 1-1/2 in. (4mm x 38mm)
Maximum:
Sheets per pass ........................................................................................................... 12*
CDs/Cards per pass ....................................................................................................... 1*
Paper entry width ...........................................................................................9” (230mm)
*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 4Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended daily usage rates:
300 sheets, 25 credit cards; 10 CD/DVDs 12 sheets per pass.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
CAPABILITIES
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
BASIC SET UP
CASTER INSTALLATION
1 2 3
17
AUTO
1 2
1 2 3
17
AUTO
3
1 2 3
17
AUTO
4
1 2 3
17
AUTO
5
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna. •Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
•Increasetheseparationbetweentheequipmentandreceiver. •Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
15
• Operation,maintenance,andservicerequirementsarecoveredintheinstruction
manual. Read the entire instruction manual before operating shredders.
• Keepawayfromchildrenandpets.Keephandsawayfrompaperentry.Alwaysset
to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–awayfromshredder
openings.Ifobjectenterstopopening,switchtoReverse( )tobackoutobject.
• Neveruseaerosolproducts,petroleumbasedlubricantsorotherflammable
products on or near shredder. Do not use canned air on shredder.
• Donotuseifdamagedordefective.Donotdisassembleshredder.
Do not place near or over heat source or water.
• ThisshredderhasaDisconnectPowerSwitch(F)thatmustbeintheON( )
positiontooperateshredder.Incaseofemergency,moveswitchtoOFF(O)
position. This action will stop shredder immediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketofthe
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIREHAZARD–DoNOTshredgreetingcardswithsoundchipsorbatteries.
• Forindooruseonly.
• Unplugshredderbeforecleaningorservicing.
15
15
KEY
A. See safety instructions
B. Paper entry
C. SafeSense
®
Technology
D. Pullout bin
E. Casters
F. Disconnect power switch
1.OFF
2.ON
G. Control Panel and LEDs
1. Reverse (blue)
2.ON/OFF(blue)
3. Forward (blue)
4. Bin full (red)
5. Bin open (red)
6. SafeSense
®
indicator (yellow)
7. Remove Paper (red)
8.Overheat(red)
•Controlpanelfeaturesmulti-touchback-litcontrols
•Whenshredderisoff,controlpanelwillnotbevisible
G.
F.
E.
B.
C.
D.
G.
A.
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
Advanced Jam Prevention- Electronically
measurespaperthicknesstopreventpaperjams:
Remove several sheets until
indicator is below red. Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise,regularshreddingwillresume.
1 2 3
UptoRED:Toomany
sheets have been inserted.
UptoGREEN:Moresheets
can be added.
UptoYELLOW:Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds
Waitforflashingtostopafterautomaticcorrection
is complete. Regular shredding will resume.
2
Press ( )ONto
activate (blue)
PAPER OR CD/CARD
BASIC SHREDDING OPERATION
1
Feed paper straight into
paper entry and release
3
Plug in and put
disconnect power
switchinON(I)position
Continuous operation:
10-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
10-minutes will trigger
20-minute cool down period.
ADVANCED PRODUCT FEATURES
Eliminates paper jams and powers through tough jobs.
Jam Proof System
Eliminatespaperjamsandpowers
throughtoughjobs.
Patented SafeSense® Technology
Stops shredding immediately when
hands touch the paper opening
Energy Saving System
Optimalenergyefficiency
100% of the time – in use
and out of use.
SafeSense
®
is active and
working properly
Touch test area and
look for the SafeSense
®
indicator to illuminate
TurntheshredderON
() to activate SafeSense
®
SAFESENSE® TECHNOLOGY
SET-UP AND TESTING
Stops shredding immediately when hands
touch the paper opening.
WHEN IN SLEEP MODE
In sleep mode To get out of sleep mode
touch control panel
insert paper
2 3
1
or
13
2
ENERGY SAVING SYSTEM
• Savesenergyinfourways:energy-efficientelectronics,jamprevention,standbymodeand
sleep mode.
• SleepModeshutsdownshredderafter2minutesofinactivity.
Optimal energy efficiency 100% of the
time – in use and out of use.
4
Whenfinished
shredding set
toOFF( )
5
or
Hold CD/card at edge,
feed right side of entry
and release
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
ENGLISH
Model 73Ci
PRODUCT MAINTENANCE
TROUBLESHOOTING
TO CLEAN THE SENSORS
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note:twopaperdetectionsensorsarelocatedinthecenterofthepaperentry).
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding, and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
15
15
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Turn off and unplug
shredder
Locate Auto-start
infared sensor
Usingcottonswab,wipe
away any contamination
from the paper sensors
Dip cotton swab in
rubbing alcohol
Press and hold forward
( ) 2-3 seconds
*Apply oil across entry
3
12 4
1 2
OverheatIndicator:WhentheOverheatIndicatorisilluminated,theshredderhasexceededitsmaximumoperatingtemperatureandneedstocooldown.This
indicator will remain illuminated and the shredder will notoperateforthedurationoftherecoverytime.SeeBasicShreddingOperationformoreinformationabout
the continuous operation and recovery time for this shredder.
BinFull:Whenilluminated,theshredderwastebinisfullandneedstobeemptied.UseFelloweswastebag36052.
BinOpen:Theshredderwillnotrunifthebinisopen.Whenilluminated,closethebintoresumeshredding.
RemovePaper:Whenilluminated,pressreverse( ) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
LIMITED PRODUCT WARRANTY
LimitedWarranty:Fellowes,Inc.(“Fellowes”)warrantsthepartsofthemachinetobefreeof
defects in material and workmanship and provides service and support for 1 year from the date
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to
be free from defects in material and workmanship for 5 years from the date of purchase by the
original consumer. If any part is found to be defective during the warranty period, your sole and
exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective
part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product
usage standards, shredder operation using an improper power supply (other than listed on the
label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any
additional costs incurred by Fellowes to provide parts or services outside of the country where the
shredderisinitiallysoldbyanauthorizedreseller.ANYIMPLIEDWARRANTY,INCLUDINGTHATOF
MERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE,ISHEREBYLIMITEDINDURATION
TOTHEAPPROPRIATEWARRANTYPERIODSETFORTHABOVE.InnoeventshallFellowesbeliable
for any consequential or incidental damages attributable to this product. This warranty gives you
specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,
except where different limitations, restrictions, or conditions may be required by local law. For
more details or to obtain service under this warranty, please contact us or your dealer.
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
Quality Office Products Since 1917
POWERSHRED® 73Ci
©2012 Fellowes, Inc. Part No. 406883
Canada +1-800-665-4339
Mexico +1-800-234-1185
United States +1-800-955-0959
Questions or Concerns?
www.fellowes.com
Troubleshooting
Registration
Manuals
Customer Service & Support
Troubleshooting
Replacement parts
General questions