Fender Pr 241 Users Manual

Bullet_and_Bullet_Reverb_manual Bullet_and_Bullet_Reverb_manual Fender® Guitar Amplifier Owner's Manuals (Archived) – Fender

Bullet Amp OM_leg_gtramp_Bullet_Amp Fender® Guitar Amplifier Owner's Manuals (Archive) – Fender

PR 241 to the manual cf7990fd-5e01-42e2-97fc-6f4fee645850

: Fender Fender-Pr-241-Users-Manual-367201 fender-pr-241-users-manual-367201 fender pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

THE SOUND THAT CREATES LEGENDS

Bullet
Amp
TYPE: PR 241

,
Owner s Manual
P/N 041526

Bullet / Bullet Reverb Owner’s Manual
The Fender Bullet / Bullet Reverb amplifiers present the
player with the best value of any gain switching amplifier in
its price class. The common equalization section consists of
TREBLE and BASS controls in addition to Fender's exclusive
MID control. This control provides midrange "tone shaping"
that will continuously vary your sound from smooth and
bluesy to a punchy honk, or all the way back to 0 for the
ultimate heavy metal overdrive! The NORMAL channel
consists of a VOLUME control, while the DRIVE channel
consists of VOLUME and GAIN controls which together set the
overall level for the DRIVE channel. The DRIVE channel also
incorporates Fender's innovative "smooth dipping' circuit.
This circuit concept is designed to simulate the way tubes dip
and produce the overdrive distortion sound so popular with
musicians today.

Bullet / Bullet Reverb Sound Settings
Just Pick It - Any Guitar / Any Pick-Up Combination

Hard Rock - Strat / Bridge Position

Dirty Blues - Strat / Neck Position

Total Shred - Any Guitar / Bridge Position

Also included is an EXTERNAL 8 Ω SPEAKER output jack
which automatically disconnects the internal 8" speaker when
used. The HEADPHONES jack automatically mutes the
speaker in addition to driving Stereo or Mono headphones.
The built in quality of a Fender amplifier is the result of over
four decades of dedication in the combined skills of research
and development by our engineers and musicians.
That is why we proudly say...FENDER, The Sound That
Creates Legends.

Bullet / Bullet Reverb Front Panel Functions

A

B

C D E

F

A. INPUT - A high impedance, high sensitivity plug-in
connection for instruments.
B.

NORMAL VOLUME - Adjusts the overall loudness of the
Normal Channel.

C. GAIN - Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in conjunction
with the DRIVE VOLUME control (item E) to set the overall
loudness of the Drive Channel.
D. DRIVE SELECT - Activates the Drive Channel.
E.

DRIVE VOLUME - Adjusts the overall loudness of the
Drive Channel.

F.

TREBLE - Adjusts the amount of boost or cut in the high
frequency range.

G. MID - Adjusts the overall tone quality without affecting
the signal level. High MID settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of
most “metal” music.
H. BASS - Adjusts the amount of boost or cut in the low
frequency range.

G

H

I

J

K

L

M

I.

REVERB - ( BULLET REVERB ONLY.) Adjusts the amount
of reverberated signal mixed with the original dry
signal for both the Normal and Drive channels.

J.

EXTERNAL SPEAKER - This jack provides an output to
an external speaker enclosure. The enclosure must
have a minimum impedance of 8Ω Use of this jack
automatically disables the internal speaker. DO NOT
PLUG HEAD PHONES IN HERE.

K. HEADPHONES - This jack provides an output to
standard stereo or mono headphones for private
listening. NOTE: Use of this jack automatically disables
the speaker. CAUTION: Prolonged listening at high
levels may be hazardous to your hearing! This jack can
also be used as an unbalanced line output by using
either a stereo or mono 1/4 inch phone plug
connection.
L.

POWER INDICATOR - When this indicator is
illuminated the Bullet / Bullet Reverb is receiving AC
power.

M. POWER SWITCH - This switch turns the AC power ON
and OFF. When the switch is OFF the amplifier is
completely shut down.
LINE CORD - This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard.
Be sure to connect it to a grounded receptacle. DO NOT
ALTER THE AC PLUG.

Bullet / Bullet Reverb Specifications
PART NUMBER:

Bullet Amp
120V VERSION: 22-6705
230V VERSION: 22-6765

INPUT IMPEDANCE:

Greater than 1 Meg Ohm

NOMINAL INPUT LEVEL:

100 mV

POWER OUTPUT:

15 Watts R.M.S.

RATED LOAD IMPEDANCE:

8 Ohms

POWER REQUIREMENTS:

120V VERSION: 120 VAC 60 Hz., .28A Max.
230V VERSION: 230 VAC 50 Hz., .14A Max.
One 8 Ohm Special Design 8” Speaker (P/N 025421)

SPEAKER COMPLEMENT:

Bullet Reverb Amp
120V VERSION: 22-6706
230V VERSION: 22-6766

DIMENSIONS:

Height: 12-3/8”
Width: 13-1/4”
Depth: 7-1/8’

(31.4cm)
(33.7cm)
(18.1cm)

WEIGHT:

15lbs.

(6.8kg)

SOUND:

Unbelievable!!

WARNING:
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.

A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.1
Linearized                      : No
Page Count                      : 4
Create Date                     : 1998:11:09 15:20:05
Producer                        : Acrobat Distiller 2.1 for Power Macintosh

EXIF Metadata provided by EXIF.tools