Fender PT 100 Tuner

PT-100 Pedal Tuner OM_leg_fxaccy_PT100_Tuner Fender® Effects and Accessories Owner's Manuals – Fender

User Manual: Fender PT-100 Tuner Fender Accessory Owner's Manuals – Fender

Open the PDF directly: View PDF .
Page Count: 2

PT-100

PT-100

PP

PPEE

EEDD

DDAA

AALL

LL

TT

TTUU

UUNN

NNEE

EERR

RR

Owner’s Manual

Owner’s Manual

1. POWER - Switches the PT-100 on-off as

indicated by the LED above.

2. NOTE DISPLAY - Indicates the note closest to

the note played.

3. TUNING LEDs - These nine LEDs indicate the

degree of flatness or sharpness of the played

note compared to the displayed note. The center

“0” LED lights when the played note is “in tune.”

4. INPUT - Plug your guitar in here.

5. OUT 1 and OUT 2 - Connect either of these

output jacks to your amplifier input: OUT 1 is

always active. OUT 2 is disabled when the PT-

100 is switched on, useful for silent guitar tuning.

6. DC 9V INPUT - Connection for the optional AC

power adapter. Connect the adapter to a

grounded AC outlet in accordance with the

frequency and voltage ratings specified on the

adapter.

7. BATTERY LED - Replace the 9V battery when

this LED flashes. Open the battery compartment

on the back of the unit by rotating the large

slotted screw counterclockwise.

FF

FFee

eeaa

aatt

ttuu

uurr

rree

eess

ss

wwwwww

..

ffeennddeerr..ccoomm

✧

wwwwww

..mmrrggeeaarrhheeaadd..nneett

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORPORATION, CORONA, CA USA

Fender

®

is a registered trademark of FMIC. © 2004 FMIC. All rights reserved. v.040818

SS

SSpp

ppee

eecc

ccii

iiff

ffii

iicc

ccaa

aatt

ttii

iioo

oonn

nnss

ss

II

IImm

mmpp

ppoo

oorr

rrtt

ttaa

aann

nntt

tt

SS

SSaa

aaff

ffee

eett

ttyy

yy

II

IInn

nnss

sstt

ttrr

rruu

uucc

cctt

ttii

iioo

oonn

nnss

ss

TYPE: PR 388

PART NUMBER: 023-9994-000

BATTERY: 9V

SCALE: 12 note equal temperament

RANGE: G0 (24.49Hz)–B8 (7902.12Hz)

PRECISION: ±1 cent

DIMENSIONS: Height: 42mm Width: 78mm Depth: 129mm

WEIGHT: 485g

Product specifications are subject to change without notice.

This symbol warns the user of dangerous voltage levels localized

within the enclosure.

This symbol advises the user to read all accompanying literature for

safe operation of the unit.

∆Read, retain, and follow all instructions. Heed all warnings.

∆CAUTION: No user serviceable parts inside, refer servicing to qualified

personnel only.

∆WARNING: To prevent damage, fire or shock hazard, do not expose this unit

to rain or moisture.

∆Do not drip nor splash liquids, nor place liquid filled containers on the unit.

∆WARNING: The unit must only be connected to a safety agency certified

power source (adapter), approved for use and compliant with applicable local

and national regulatory safety requirements.

∆Hazardous voltages may be present within the cabinet even when the power

switch is off and the power cord is connected. Therefore, disconnect the

power cord from the rear panel power inlet before servicing. The power inlet

must remain readily operable.

∆This product should be located away from heat sources such as radiators,

heat registers, or other products that produce heat.

∆This product should be serviced by qualified service personnel when: the

power supply cord or the plug has been damaged; or objects have fallen, or

liquid has been spilled onto the product; or the product has been exposed to

rain; or the product does not appear to operate normally or exhibits a marked

change in performance; or the product has been dropped, or the enclosure

damaged.

∆This product may be equipped with a polarized plug (one blade wider than

the other). This is a safety feature. If you are unable to insert the plug into

the outlet, contact an electrician to replace your obsolete outlet. Do not

defeat the safety purpose of this plug.

∆Only connect the power supply cord to an earth grounded AC receptacle in

accordance with the voltage and frequency ratings specified on the unit or

the adapter.

∆Protect the power supply cord from being pinched or abraded.

∆The power supply cord of this product should be unplugged from the outlet

when left unused for a long period of time, or during electrical storms.

∆Unplug the power supply cord before cleaning the unit exterior (use a damp

cloth only). Wait until the unit is completely dry before reconnecting it to

power.

wwwwww

..

ffeennddeerr..ccoomm

✧

wwwwww

..mmrrggeeaarrhheeaadd..nneett