Fibar Group FGBHMS001 Motion Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3167205
Application ID	GBP2WJ8pWyWT9uiGHLCbVw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.03kB (950433 bits)
Date Submitted	2016-10-19 00:00:00
Date Available	2016-12-21 00:00:00
Creation Date	2016-09-09 14:47:24
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-09-09 14:47:25
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

O P E R AT I N G
MANUAL
EN
FIBARO MOTION SENSOR
FGBHMS-001
CONTENTS
#1: Description and features
#2: Powering the accessory
#3: Pairing the accessory
#4: Physical installation
#5: Reset
v1.0
#6: Functionalities
#7: Configurable parameters
#8: Specifications
#9: Regulations
11
12
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Motion Sensor, configure it from a
compatible app with just a few simple steps.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
off the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.

3
#1: Description and features
FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using
Bluetooth® low energy technology.
Along with detecting motion, the accessory measures the ambient
temperature and light intensity.
The sensor has a built-in accelerometer to detect any tampering with
the accessory.
FIBARO Motion Sensor is battery powered and designed to be
installed quickly and easily on any surface.
The eye-shaped LED indicator signals motion, temperature level,
tampering and can be used to identify the accessory.
Main features of FIBARO Motion Sensor:
•
compatible with Apple HomeKit technology
•
Bluetooth® low energy technology for wireless communication
•
detects motion using a passive IR sensor
•
measures ambient temperature
•
measures light intensity
•
detects tampering using accelerometer
•
easy installation
•
may be installed anywhere - wall or any surface
•
battery powered
•
indicates state using multicolor LED diode
NOTE
Controlling
this
HomeKit-enabled accessory requires an
iPhone, iPad, or iPod
touch with iOS 9.3 or
later.
Controlling
this
HomeKit-enabled accessory away from
home
requires
third-generation
Apple TV with Apple TV
software 7.2.1 or later
or a fourth generation
Apple TV with tvOS 9.2
or later and an iPhone,
iPad, or iPod touch
with iOS 9.3 or later
Description and features
4
#2: Powering the accessory
1. Turn the cover counter-clockwise and open it.
NOTE
Remember to use
only battery type
specified in the manual and keep the right
polarity.
2. Remove the battery blocker and check if the battery is placed correctly.
NOTE
If the accessory blinks
green after powering,
it is already paired and
has to be reset to pair
again.
3. The accessory will glow red – it is ready to be paired.
4. Close the cover and turn it clockwise, dots on the casing should
align.
Powering the accessory
5
#3: Pairing the accessory
1. Open the Settings app on your iOS device.
2. Go to the Bluetooth® section, and turn the Bluetooth® on.
3. Place the accessory next to your iOS device.
4. Open a HomeKit app of your choosing on your iOS device.
5. Open pairing window in your HomeKit app to detect available
accessories.
NOTE
Use Fibaro app to fully utilize this product.
Other HomeKit compatible apps might
not support all of its
features.
6. Choose Motion Sensor you wish to pair.
7. You can identify it - Motion Sensor will triple blink blue 3 times.
8. Find HomeKit Setup Code on the last page of user manual included in the box that looks like this:
XXX-XX-XXX
9. Start pairing with your HomeKit app.
NOTE
Remember to keep
your HomeKit Setup
Code in safe place. You
may need it in case of
re-pairing.
10. Point your iOS device’s camera at the Setup Code to scan it or enter the Setup Code manually.
11. If entered Setup Code is valid, the device will complete the setup
process.
12. Follow instructions displayed in the application.
Pairing the accessory
6
#4: Physical installation
Installing the Motion Sensor:
1. Install the holder (using an expansion bolt or a sticker).
Sticker
2. Insert the device into the holder.
3. Test the operation - check whether the device indicates motion
detection.
Detection range:
Detection range of the Motion Sensor is shown below. Actual range
of the Sensor can be influenced by environmental conditions.
5m
3m
0m
0m
7m
5m
7m
Installation location and working conditions:
The Motion Sensor should be installed in a corner of the room or perpendicularly to the doors.
Moving objects such as trees blowing in the wind, cars passing by,
household fans and moving masses of air and heat within detection
area of the sensor can cause false motion detection.
Physical installation
7
#5: Reset
Resetting the Motion Sensor to factory defaults:
Reset procedure allows to restore the accessory back to its factory
settings including HomeKit pairing. We recommend performing resetting procedure within range of your iOS device’s Bluetooth®.
1. Open the cover.
2. Press and hold the button.
Button
NOTE
If reset procedure
was performed outside
iOS device’s
Bluetooth® range the
accessory will not be
removed from the
HomeKit app and will
not respond. In this
case remove the device manually from
the app.
3. Wait for the LED indicator to glow yellow.
4. Release the button.
5. Click the button to confirm.
6. After resetting the accessory will glow red - it is ready to be paired
again.
Reset
8
#6: Functionalities
NOTE
If you are using Fibaro
app you can adjust
sensitivity,
sustain
time and LED indication for motion detection using parameters.
NOTE
If you are using Fibaro
app you can adjust
sensitivity and indications for tamper detection using parameters.
NOTE
The accessory measures temperature in
the place of installation. Remember that
temperature
near
the ceiling may differ
from that on eye-level
or the floor.
NOTE
The accessory measures light intensity
in the place of installation, not where the
sensor is pointed.
Functionalities
Motion detection:
The Motion Sensor detects movement using PIR sensor and reports it
to your iOS device.
Blink of LED indicates detected motion. Color of blink is dependent on
current ambient temperature (smooth transition through blue, green
and red). Brightness of blink is adjusted by measured light intensity.
Tamper detection:
The Motion Sensor detects tampering when accessory is moved and
reports it to your iOS device. Tampering is indicated with an alternate
blinking in red, blue and white.
Temperature measuring:
The Motion Sensor measures ambient temperature every 5 minutes. If the measured temperature differs from previously reported
by at least 2°C (3.6°F), accessory reports it to your iOS device.
Battery level measuring:
The Motion Sensor measures battery level every 24 hours and reports
it to your iOS device. Additionally, if battery level is below 15%, the
accessory will report low level battery status to your iOS device.
Light intensity measuring:
The Motion Sensor measures light intensity. If the measured light intensity differs from previously reported by at least 200 lux, accessory
reports it to your iOS device.
9
#7: Configurable parameters
1. Motion detection – sensor sensitivity
This parameter allows to set sensitivity of PIR sensor used for motion
detection.
The higher the value of this parameter, the higher the sensitivity.
Available settings: 1 – low sensitivity
2 – medium sensitivity
Default setting:
3 – high sensitivity
2 (medium sensitivity)
2. Tamper – sensor sensitivity
This parameter allows to set sensitivity of tamper detection.
The higher the value of this parameter, the higher the sensitivity.
Available settings: 0 – tamper disabled
1 – low sensitivity
2 – medium sensitivity
Default setting:
3 – high sensitivity
2 (medium sensitivity)
3. Motion detection – LED indication
This parameter allows to choose how the LED indicator will behave
after detecting motion.
Available settings: 0 – LED indications disabled
1 – color dependent on temperature*
2 – flashlight mode**
Default setting:
3 – white, 4 – red, 5 – green, 6 – blue, 7 – yellow,
8 – cyan, 9 – magenta
1 (color dependent on temperature)
NOTE
* Color is a smooth
transition from blue
through green to
red in range 18-30°C
(64.4-86°F).
** In flashlight mode
the LED provides
white light with higher brightness.
4. Tamper – LED indication
This parameter allows to choose if accessory will indicate tampering
using LED (alternate blinking in red, blue and white).
Available settings: 0 – tamper indication disabled
Default setting:
1 – tamper indication enabled
1 (tamper indication enabled)
Configurable parameters
10
5. Motion detection - sustain time
This parameter allows to set how long the information about detected motion is sustained by the accessory. Each subsequent motion detection causes time to be counted from the beginning.
Available settings: 1-32767 – sustain time in seconds
Default setting:
30 (30 seconds)
Configurable parameters
11
#8: Specifications
Power supply:
3.0V DC battery
Battery type:
CR123A
EU directives compliance:
R&TTE 1999/5/EC
RoHS 2011/65/EU
Radio protocol:
Bluetooth® low energy
Radio frequency:
2.4 GHz
Range:
up to 50m (free range)
(164 feet)
Recommended
installation height:
2.4 meters (7.87 feet)
Operating temperature:
0-40°C (32-104°F)
Temperature measuring
range:
0-40°C (32-104°F)
Temperature measuring
accuracy:
±0.5°C (±0.9°F)
Light intensity measuring
range:
0-32000 lux
Dimensions (diameter):
46 mm (1.8 inch)
CAUTION
Using batteries other
than specified may
result in explosion.
Dispose of properly,
observing
environmental
protection
rules.
Specifications
12
#9: Regulations
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate
this equipment under Federal Communications Commission’s rules.
Industry Canada (IC) Compliance Notice
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme aux normes d’exemption de licence RSS d’Industry Canada. Son fonctionnement est soumis aux deux conditions
suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet
appareil doit accepter toute interférence, notamment les interférences
qui peuvent affecter son fonctionnement.
Radio frequency (RF) exposure statement
This equipment should be installed and operated keeping the radiator
at least 20 cm or more away from person's body.
Cet équipement doit être installé et utilisé en gardant une distance de
20 cm ou plus entre le dispositif rayonnant et le corps.
Regulations
13
DGT Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not
affect the navigation safety nor interfere a legal communication, if an
interference is found, the service will be suspended until improvement
is made and the interference no longer exists.
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。
Legal Notices
All information, including, but not limited to, information regarding the
features, functionality, and/or other product specification are subject
to change without notice. Fibaro reserves all rights to revise or update
its products, software, or documentation without any obligation to notify any individual or entity.
FIBARO and Fibar Group logo are trademarks of Fibar Group S.A.
The Bluetooth word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Fibar Group S.A. is
under license.
Apple, iPhone, iPad, iPad Air, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries. HomeKit is a trademark
of Apple Inc.
All other brands and product names referred to herein are trademarks
of their respective holders.
Use of the Works with Apple HomeKit logo means that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
Declaration of conformity
Hereby, Fibar Group S.A. declares that FIBARO Motion Sensor
is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Regulations

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19
Create Date                     : 2016:09:09 14:47:24+02:00
Metadata Date                   : 2016:09:09 14:47:25+02:00
Modify Date                     : 2016:09:09 14:47:25+02:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:a9b18872-1b20-4b76-a9d6-da8da604fc6b
Original Document ID            : xmp.did:455a1578-6fd4-2743-be56-16744df7b6c8
Document ID                     : xmp.id:0b52ff82-913a-094b-b461-d3dfbbaf1dfe
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e5363c59-550b-b74c-bec0-f5bed2a7f7e7
Derived From Document ID        : xmp.did:e5363c59-550b-b74c-bec0-f5bed2a7f7e7
Derived From Original Document ID: xmp.did:455a1578-6fd4-2743-be56-16744df7b6c8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:09:09 14:47:24+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 13
Creator                         : Adobe InDesign CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools