Fibar Group FGBHPB101 The Button User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3561084
Application ID	ST1JSIymG+ruYUEqQameEg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.61kB (457671 bits)
Date Submitted	2017-09-14 00:00:00
Date Available	2017-10-30 00:00:00
Creation Date	2017-09-04 16:04:38
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-04 16:04:39
Document Title	User Manual
Document Creator	Adobe InDesign CC 2017 (Windows)

O P E R AT I N G
MANUAL
EN
FIBARO BUTTON
FGBHPB-101
CONTENTS
#1: Description and features
#2: Basic activation
#3: Pairing the accessory
#4: Functionality
v1.1
#5: Reset
#6: Specifications
#7: Regulations
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Compliance with safety standards:
The device is designed to be used with Apple HomeKit and is compliant with IEC/UL/CSA 60950-1. In case of the integration with another
system, e.g. alarm system, it is required to verify the compliance with
additional standards.
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Button, configure it from a compatible
app with just a few simple steps to control your home.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
off the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.
Controlling this HomeKit-enabled accessory requires an iPhone,
iPad, or iPod touch with iOS 9.3 or later.
Controlling this HomeKit-enabled accessory away from home
requires a third-generation Apple TV with Apple TV software
7.2.1 or later or a fourth generation Apple TV with tvOS 9.2 or
later and an iPhone, iPad, or iPod touch with iOS 9.3 or later

3
#1: Description and features
FIBARO Button is a HomeKit-enabled, compact, battery-powered
wireless controller using Bluetooth® low energy technology. It allows
you to control HomeKit accessories using Automations.
Various actions may be triggered with one clicks, two clicks or by
holding the button down.
With its small design and wireless communication, the FIBARO Button
can be conveniently mounted on any surface and in any position or
location at home, e.g. beside the bed or under the desk.
NOTE
Automations require
using Apple TV (4th
generation) or iPad
(iOS 10 or later) set as
Home Hub.
Main features of FIBARO Button:
•
compatible with Apple HomeKit technology,
•
Bluetooth® low energy technology for wireless communication,
•
detects 3 different actions: 1 click, 2 clicks, hold and release,
•
battery powered,
•
easy installation,
•
may be installed on any surface,
•
indicates state using buzzer,
•
many colour variations: black, white, red, green, blue, yellow,
orange and brown.
Description and features
4
#2: Basic activation
1. Press and turn the button counter-clockwise to open the casing.
2. Remove the battery blocker and check if the battery is placed
correctly.
3. Press and turn the button clockwise to close the casing.
4. Pair the accessory (as described in "#3: Pairing the accessory").
5. Install the accessory in desired location using the attached
self-adhesive pad.
Basic activation
5
#3: Pairing the accessory
1. Open the Settings app on your iOS device.
2. Go to the Bluetooth® section, and turn the Bluetooth® on.
3. Place the accessory next to your iOS device.
4. Open a HomeKit compatible app of your choosing on your iOS
device.
5. Open pairing window in your HomeKit app to detect available
accessories.
6. Choose The Button you wish to pair.
7. You can identify it - The Button will triple beep 3 times.
8. Find HomeKit Setup Code on the last page of Quick Start Guide
included in the box that looks like this:
XXX-XX-XXX
9. Start pairing with your HomeKit app.
10. Point your iOS device’s camera at the Setup Code to scan it or enter the Setup Code manually.
11. If entered Setup Code is valid, the device will complete the setup
process.
NOTE
Remember to keep
your HomeKit Setup
Code in safe place. You
may need it in case of
re-pairing.
Backup Setup Code is
printed on the label
of the accessory, but
requires entering it
manually.
12. Follow instructions displayed in the application.
Pairing the accessory
6
#4: Functionality
NOTE
Automations require
using Apple TV (4th
generation) or iPad
(iOS 10 or later) set as
Home Hub.
Detecting Button pushes:
The Button detect if it was clicked one time, two times, held or released, then reports it to your iOS device.
Automations can be created based on the detected action.
Battery level measuring:
The Button measures battery level every 24 hours and reports it to
your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
Buzzer:
The Button is equipped with a built-in buzzer that signals status of
the accessory, like identification (3 triple beeps) or reset confirmation
(long beep).
If enabled, the accessory can also respond to actions with sound signals. The accessory will confirm number of performed clicks with the
same amount of beeps (e.g. two clicks - two beeps). Holding will be
signaled with intermittent tone.
Functionality
7
#5: Reset
Resetting the Button to factory defaults:
Reset procedure allows to restore the accessory back to its factory
settings including HomeKit pairing.
1. Click the Button exactly five times.
2. Press and hold the Button for at least 5 seconds.
3. Long beep will confirm resetting.
Reset
8
#6: Specifications
CAUTION
Using batteries other
than specified may
result in explosion.
Dispose of properly,
observing
environmental
protection
rules.
Specifications
Power supply:
3.6V DC battery
Battery type:
ER14250 ½AA
Battery life:
est. 2 years (max. 10 pushes per day)
EU standards compliance:
RED 2014/53/EU
RoHS 2011/65/EU
Radio protocol:
Bluetooth® low energy
Radio frequency:
2.4 GHz
Range:
up to 50m (free range)
(164 feet)
Operating temperature:
0-40°C (32-104°F)
Dimensions
(diameter x height):
46 x 34 mm
(1.81" x 1.34")
9
#7: Regulations
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the FCC requirements for RF exposure in public or
uncontrolled environments.
ISED Canada Compliance Notice
This device complies with ISED Canada license-exempt RSSs. Operation
is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with the safety requirements for RF exposure in
accordance with RSS-102 Issue 5 for portable use conditions.
Cet appareil est conforme aux normes d’exemption de licence RSS
ISED Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent affecter son fonctionnement.
Le présent appareil est conforme aux limites d’exposition aux RF conformément au norme CNR-102 émission 5 pour conditions d’utilisation
portable.
Legal Notices
All information, including, but not limited to, information regarding the
features, functionality, and/or other product specification are subject
to change without notice. Fibaro reserves all rights to revise or update
its products, software, or documentation without any obligation to notify any individual or entity.
Regulations
10
FIBARO and Fibar Group logo are trademarks of Fibar Group S.A. All
other brands and product names referred to herein are trademarks of
their respective holders.
Note
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate
this equipment under Federal Communications Commission’s rules.
DGT Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not
affect the navigation safety nor interfere a legal communication, if an
interference is found, the service will be suspended until improvement
is made and the interference no longer exists.
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。
Warning
This product is not a toy. Keep away from children and animals!
WEEE Directive Compliance
Device labelled with this symbol should not be disposed with
other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and
electronic equipment.
Declaration of conformity
Hereby, Fibar Group S.A. declares that FIBARO Button is in
compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Regulations

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Language                        : pl
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Create Date                     : 2017:09:04 16:04:38+02:00
Metadata Date                   : 2017:09:04 16:04:39+02:00
Modify Date                     : 2017:09:04 16:04:39+02:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:ec0252b9-fd2a-4f57-8222-3da037790863
Original Document ID            : xmp.did:455a1578-6fd4-2743-be56-16744df7b6c8
Document ID                     : xmp.id:b7f9dc56-8ccc-be46-a2b1-b6fc341e0530
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:68ffbabe-457b-de42-818d-1d2f558504af
Derived From Document ID        : xmp.did:659cbf30-9e31-8b4d-ae85-832cd71bba27
Derived From Original Document ID: xmp.did:455a1578-6fd4-2743-be56-16744df7b6c8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:09:04 16:04:38+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 10
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools