Fihonest Communication JS-BLMN5F31 Bluetooth Module User Manual Fihonest JS BLMN5F31 DATASHEET 201412223

Download:
Mirror Download [FCC.gov]
Document ID	2570725
Application ID	m7idjzA8UoMR154VDuw5jQ==
Document Description	2AB2RJS-BLMN5F31_User Manual REV1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	116.69kB (1458615 bits)
Date Submitted	2015-03-30 00:00:00
Date Available	2015-03-31 00:00:00
Creation Date	2014-12-23 16:35:38
Producing Software	pdfFactory Pro 3.01 (Windows XP Professional Chinese)
Document Lastmod	2015-03-30 13:41:52
Document Title	Fihonest JS-BLMN5F31 DATASHEET_201412223.doc
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Administrator

Fihonest Communication Co.,Ltd.
JS-BLMN5F31
Fihonest Bluetooth Module User Manual
Document Type:
Bluetooth Module User Manual
Document Version:
V1.0
Release Date:
Dec 23, 2014
Copyright 2012 by Fihoenst Communication Co., Ltd. All Rights Reserved.
Reproduction of this document, in part of in whole, by any means is prohibited without written permission
from Fihonest Communication Co., Ltd. The information contained herein is believed to be accurate as of
the date of publication. However, Fihonest is not liable for any damages, including indirect or
consequential from the use of software this document represents, or any reliance of the accuracy of this
document. Fihoenst reserves the right to change the contents of this document at any time without notice.
This document contains proprietary confidential trade secrets and may be subject to additional
restrictions contained in the licensing agreement under which this document was obtained.
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
Revision History
Date
2014-12-23
Version
V1.0
Description
Author
First Release
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
CONTENT
1.
1.1
1.2
1.3
INTRODUCTION................................................................................................................................. 4
Block Diagram ........................................................................................................................................ 4
Features ................................................................................................................................................. 5
Applications ........................................................................................................................................... 6
2.
GENERAL SPECIFICATION ............................................................................................................ 7
3.
PHYSICAL CHARACTERISTIC...................................................................................................... .8
3.1
Pin Description.................................................................................................................................... 10
4.
PHYSICAL INTERFACE……………………………………………………………………….…..11
4.1
4.2
4.3
4.4
4.5
Power Supply.......................................................................................................................................... .11
General Purpose I/0............................................................................................................................ 11
UART.................................................................................................................................................. 11
I2C....................................................................................................................................................... 11
Debugger Support............................................................................................................................... .11
5.
ELECTRICAL CHARACTERISTIC ................................................................................................12
5.1
5.2
5.3
5.3
Absolute Maximus Ratings .......................................................................................................................12
Recommended Operating Conditions ...........................................................................................................12
RF Performance……………………………………………………………………………………...12
Power Consumptions.................................................................................................................................12
6.
PACKAGING INFORMATION ........................................................................................................ 13
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
1. INTRODUCTION
The JS-BLMN5F31 Bluetooth® module is a perfect solution for bluetooth low energy single mode
application. It can be configured,command and contorlled via simple ASCII string with customer
application embeded onto the unit. It is slim and light so the designers can have better flexibilities for
the bluetooth low energy product shapes.
The JS-BLMN5F31 Bluetooth® module complies with Bluetooth® specification version 4.0(single
mode). It includes integrated software stack,profiles,and AT modem like commands.It supports
maximum bluetooth data rates via UART interface and provides PIO,I2C,SPI interface for external
hardware requirement.
The detail information of JS-BLMN5F31 Bluetooth® module is presented in this document below.
1.1 Block Diagram
PCB Antenna
UART
RF match
PIO
nRF51822
I2C
SWD
Crystal
16MHz
Fihonest Communication Co.,Ltd
VDD
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
1.2 Features
ü Small overall dimension
ü Bluetooth specification V4.0(single mode)
ü Class 2 support
ü -93dBm sensitivity in Bluetooth low energy mode.
ü TX Power -20dBm to +4dBm
ü ARM Cortex-M0 32 bit processor,256KB Flash memory,16KB RAM
n Serial Wire Debug (SWD)
ü Complete power-optimized stack,includeing contoller and host
ü Embedded bluetooth stack protocols and profiles include: GAP, GATT, SMP, ATT, L2CAP
ü Low power consumption (13mA RX, 10.5mA TX, @ 0dBm)
ü Ultra low current consumption,flexible power management
n 0.4uA @ 3V off mode
n 0.5uA @ 3V in off mode + 1 region RAM retention
n 2.3uA @ 3V on mode,all blocks IDLE
ü Secure and robust communication link with billions of unique codes
n FHSS (Frequency Hopping Spread Spectrum)
n 24 bit CRC Error correction for guaranteed packet delivery
n Lead Free design which is compliant with RoHS requirements
ü Flexible real-time counter and two 16 bit and one 24 bit times with counter mode
ü AES Coprocessor,random number generator,watchdog timer
ü Configurable I/O mapping (I/0 signals can use any pin,simple layout of external application)
ü Physical connection as SMD type
※ Some features are optional for customization on demand.
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
1.3 Application
ü 2.4-GHz Bluetooth low energy Systems
ü Human-interface devices (Keyboard, Mouse,Portable Devices, Remote Control)
ü Sports and fitness devices (Heart rate monitor,Foot pod,Cycle speed/power/cadence )
ü Mobile Phone Accessories
ü Remote controller via BLE connection
ü Health devices (Glucose meter)
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
2. GENERAL SPECIFICATION
General Specification
Chip Set
Nordic nRF51822
Module ID
JS-BLMN5F31
BT Standard
Bluetooth® V4.0 specification(single mode)
Frequency Band
2.402GHz~2.480GHz ISM Band
Modulation
GFSK, 250 KHz deviation
Number of channels
40 channels for Bluetooth Low Energy
Output Power(Class II)
0±1dBm(L ch), -1±1dBm(M ch),-1±1dBm(H ch)
Receive sensitivity
-90dBm @ 0.1% BER
Baseband Crystal OSC
32MHz,32.768KHz(optional)
RF Input Impedance
50 ohms
Host Interface
Temperature
Fihonest Communication Co.,Ltd
UART
I2C
PIO
SWD
-20ºC to +70ºC
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
3. PHYSICAL CHARACTERISTIC
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
Fihonest Communication Co.,Ltd
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
3.1 Pin Description
Pin#
Pin Name
Pin Type
GND
Ground
Ground
VDD
Power
Power Supply
P0.25
Digital I/O
General purpose I/O
P0.26
Digital I/O
General purpose I/O
P0.27
Digital I/O
General purpose I/O
P0.28
Digital I/O
General purpose I/O
P0.29
Digital I/O
General purpose I/O
P0.08
Digital I/O
General purpose I/O
P0.09
Digital I/O
General purpose I/O
10
P0.12
Digital I/O
General purpose I/O
11
SWDIO
Digital I/O
Debug and flash programming I/O
12
SWCLK
Digital input Debug and flash programming I/O
13
P0.17
Digital I/O
General purpose I/O
14
P0.18
Digital I/O
General purpose I/O
15
P0.19
Digital I/O
General purpose I/O
Fihonest Communication Co.,Ltd
Description
10
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
4. PHYSICAL INTERFACE
4.1
Power Supply
The transient response of the regulator is important. If the power rails of the module are
supplied from an external voltage source, the transient response of any regulator.
4.2
General Purpose IO
There are nine general purpose digital IOs defined in the module. It can configure whether
peripheral modules control certain pins or whether they are under software control, and if so,
whether each pin is configured
as an input or output and if a pullup or pulldown resistor in the pad is connected. Each
peripheral that connectsto the I/O pins can choose between two different I/O pin locations to
ensure flexibility in various applications.
4.3
UART
This is a standard UART interface for communicating with other serial devices. The UART
interface provides a simple mechanism for communicating with other serial devices using the
RS232 protocol.
When the module is connected to another digital device,UART_RX and UART_TX transfer
data between the two devices.
4.4
I2C
4.5
Debugger Support
Any three PIOs can be used as a master I2C interface by configuring the hardware bit serialiser
with suitable firmware. The strong pull-ups in the PIO pads eliminate the need for external pullup resistors.
The two pin Serial Wire Debug (SWD) interface provided as a part of the Debug Access Port
(DAP) offers a flexible and powerful mechanism for non-intrusive debugging of program code.
Breakpoints and single stepping are part of this support.
Fihonest Communication Co.,Ltd
11
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
5. ELECTRICAL CHARACTERISTIC
5.1 Absolute Maximum Ratings
Description
5.2
Supply voltage
-0.3
Voltage on any digital pin
-0.5
Storage temperature range
-40
Min.
Typ.
Unit
3.9
VDD+0.3<=3.9
125
ºC
Max.
Unit
VDD pin operating supply
2.0
3.3
3.6
Operating temperature
-20
25
70
ºC
RF Performance
Description
Min.
Typ.
Max.
Unit
Maximum output power
-20
dBm
Sensitivity(0.1%BER)
@1Mbps
5.4
Max
Recommended Operating Conditions
Description
5.3
Min
-90
dBm
Power consumptions
Test conditions: TA = 25°C, VDD = 3.3 V and fc = 2440 MHz,
1 Mbsp, GFSK, 250-kHz deviation, Bluetooth™ low energy Mode, 1% BER (1)
Description
Min
Type
Max
Unit
TX mode,0dBm
10.5
mA
RX mode,0dBm
13
mA
System-on base current
2.3
uA
Fihonest Communication Co.,Ltd
12
Proprietary and Confidential
v
Fihonest Communication Co.,Ltd.
6. PACKAGING INFORMATION
1. BLUETOOTH® Module: JS-BLMN5F31
Note: Warning
This device and its antenna must not be located or operating in conjunction with any other antenna and transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Important announcement
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following" Contains TX FCC ID: 2AB2RJS-BLMN5F31
". The FCC part 15.19 statement below has to also be available on the label: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum
antenna gain including cable loss in a portable exposure condition must not exceed -1dBi.
A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to
ensure compliance with current FCC RF exposure guidelines.
The end product with an embedded Module may also need to pass the FCC Part 15 unintentional emission testing requirements
and be properly authorized per FCC Part 15.
Do not simultaneously emit.
Fihonest Communication Co.,Ltd
13
Proprietary and Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Administrator
Title                           : Fihonest JS-BLMN5F31 DATASHEET_201412223.doc
Create Date                     : 2014:12:23 16:35:38+08:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Modify Date                     : 2015:03:30 13:41:52+08:00
Metadata Date                   : 2015:03:30 13:41:52+08:00
Producer                        : pdfFactory Pro 3.01 (Windows XP Professional Chinese)
Document ID                     : uuid:5a673363-e7cc-48f0-9eb3-16d3642eab1d
Instance ID                     : uuid:2a3a6c76-7ad7-4244-944b-bdf022422c44
Page Count                      : 13
Author                          : Administrator

EXIF Metadata provided by EXIF.tools