Fimi Srl 802161 Digita Transmission System User Manual

Fimi Srl Digita Transmission System UserMan CMPD12CV A rev1 1x

a href="https://usermanual.wiki/Fimi-Srl" itemprop="url"> Fimi Srl >

15_12 Zoll LCD_UserMan rev1.1

User Manual 12” LCD ProScribe Xper module Atom
12” LCD ProScribe Xper module Atom 2 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO AVOID THE RISK OF ELECTRICAL SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Copyright © This manual is copyrighted with all rights reserved. Under the copyright law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format. The device described in this manual, has been certified/registered by the safety agencies/regulatory authorities as model n° : CMPD12CV-A and certified by FCC and IC governments agencies respectively as: FCC ID: GZM802161 and 6319A-802161 FCC Notice The device complies with part 15 of the FCC Rules. Operation is subjected to the following 2 conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, while can be determined by turning the equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio TV technician for help. Modification The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded signals cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. The lighting flash with arrowhead symbol is intend to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electrical shock to people. The exclamation mark is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in literature accompanying the appliance. WARNING: THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO QUALIFIED SERVICE PERSONNEL XPER MODULE MONITOR DO NOT HAVE APPLIED PARTS, AND ARE NOT INTENDED TO BE CONNECTED TO A PATIENT CIRCUIT.
Download:
Mirror Download [FCC.gov]
Document ID1656386
Application ID0kr+MXY4SGNbRXPaWm+TEA==
Document Description15_12 Zoll LCD_UserMan rev1.1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize388.23kB (4852913 bits)
Date Submitted2012-03-15 00:00:00
Date Available2012-03-15 00:00:00
Creation Date2012-02-01 12:00:28
Producing SoftwareAcrobat PDFWriter 5.0 for Windows NT
Document Lastmod0000-00-00 00:00:00
Document TitleUserMan CMPD12CV-A rev1.1.docx
Document CreatorUserMan CMPD12CV-A rev1.1.docx - Microsoft Word
Document Author: FUMA
FCC ID Filing: GZM802161

Navigation menu