Fine Offset Electronics WH19 Weather Station User Manual 15 WH19 UserMan
Fine Offset Electronics Co., Ltd. Weather Station 15 WH19 UserMan
15_WH19 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3485654 |
| Application ID | 0GYRKJ/bBIXjnN6X0P4yig== |
| Document Description | 15_WH19 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.01kB (625166 bits) |
| Date Submitted | 2017-07-28 00:00:00 |
| Date Available | 2017-07-28 00:00:00 |
| Creation Date | 2017-07-24 19:33:37 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2017-07-25 10:25:18 |
| Document Title | For basic settings the following menu is started by touching the touch-screen in the center of the text display |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | EE |
Wireless Indoor / Outdoor Thermometer with Indoor Humidity User Manual Sensor model :WH19 Receiver model: WH0270 Table of Contents Introduction ..................................................................................................................................... 1 Getting Started ................................................................................................................................ 1 2.1 Parts List................................................................................................................................. 1 2.2 Recommend Tools .................................................................................................................. 2 2.3 Thermometer Sensor Set Up .................................................................................................. 2 2.4 Display Console Set Up ......................................................................................................... 2 2.4.1 Display Console Layout ..................................................................................................... 4 2.4.2 Sensor Operation Verification ............................................................................................ 4 Remote Sensor Installation ............................................................................................................. 4 Console Operation........................................................................................................................... 5 4.1 Temperature Units of Measure ............................................................................................... 5 4.2 High Low Record ................................................................................................................... 5 4.3 Sensor Resynchronization ...................................................................................................... 5 4.3.1 Best Practices for Wireless Communication ...................................................................... 5 Glossary of Terms ........................................................................................................................... 6 Specifications .................................................................................................................................. 6 6.1 Wireless Specifications .......................................................................................................... 6 6.2 Measurement Specifications................................................................................................... 6 6.3 Power Consumption ............................................................................................................... 6 Troubleshooting Guide.................................................................................................................... 6 Liability Disclaimer ........................................................................................................................ 7 FCC Statement ................................................................................................................................ 8 1 Introduction Thank you for your purchase of the Weather Wireless Indoor/Outdoor Thermometer with Indoor Humidity. The following user guide provides step by step instructions for installation, operation and troubleshooting. 2 Getting Started Note: The power up sequence must be performed in the order shown in this section (insert batteries in the remote transmitter(s) first, Display Console second). The WH0270 weather station consists of a display console (receiver), and a thermometer (remote transmitter). 2.1 QTY Version 1.0 Parts List Item Display Console Frame Dimensions (LxHxW): 3 x 3.5 x 1 in LCD Dimensions (LxW): 2.5 x 2.25" Page 1 LCD Segment Height: 0.75 inch 2.2 Thermometer transmitter (WH19) Dimensions (LxHxW): 2.75” x 1.75” x 0.75” User Manual Recommend Tools Hammer for hanging remote thermometer transmitter. 2.3 Thermometer Sensor Set Up Note: Do not use rechargeable batteries. They tend to have a lower operating voltage, do not have a wide temperature range, and do not last as long as non-rechargeable batteries. We recommend fresh alkaline batteries for outdoor temperature ranges between -4 °F and 140 °F and fresh lithium batteries for outdoor temperature ranges between -40 °F and 140 °F . 1. Remove the battery door on the back of the sensor by sliding the compartment door down, as shown in Figure 1 . Figure 1 Integrated hanger for zip tie Wireless transmitter LED AA Battery Battery Compartment Cover 2. Insert one AA battery. 3. After inserting the battery, the remote sensor LED indicator will light for 4 seconds, and then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data. 4. Close the battery door. 2.4 Display Console Set Up 1. Move the remote thermometer(s) about 5 to 10’ away from the display console (if the sensor is too close, it may not be received by the display console). 2. Remove the battery door on the back of the display, as shown in Figure 2. Insert one AA (alkaline or lithium, avoid rechargeable) battery in the back of the display console. Version 1.0 Page 2 Figure 2 Suspension eye for wall hanging Desk Stand °C / °F button High / Low Record button Battery Compartment Battery Compartment door All of the LCD segments will light up for a few seconds to verify all segments are operating properly. 3. Replace the battery door, and fold out the desk stand and place the console in the upright position. The console will instantly display indoor temperature and humidity. temperature will update on the display within a few minutes. While in the search mode, the reception search icon flash. If the remote does not update, please reference the troubleshooting guide in Section 7. Version 1.0 Page 3 The remote 2.4.1 Display Console Layout Figure 3 Outdoor Temperature Indoor Temperature Indoor Humidity Outdoor Temperature High / Low Record Indoor Temperature High / Low Record Indoor Humidity High / Low Record Wireless Reception Icon 2.4.2 Sensor Operation Verification Verify the indoor and outdoor temperature match closely with the console and sensor array in the same location (about 5 to 10’ apart). The sensors should be within 2°F (the accuracy is ± 1°F ). Allow about 30 minutes for both sensors to stabilize. 3 Wireless Sensor Installation It is recommended you mount the remote sensor in a shaded area. Direct sunlight and radiant heat sources will result in inaccurate temperature readings. Although the sensor is water resistant, it is best to mount in a well-protected area, such as under an eve. 3.1 Mounting with Zip Tie Figure 4 Version 1.0 Page 4 4 Console Operation Note: The console has two buttons for easy operation: °C / °F button (on the left), and High / Low Record button (on the right). 4.1 Temperature Units of Measure To change the temperature units of measure, press the C / °F button (on the left). 4.2 High Low Record The indoor temperature, indoor humidity, and outdoor temperature can be reset every 24 hours (based on when the batteries are inserted), or never. Press the High / Low Record button (on the right) to switch between reset 24 hours or never. To reset the highs and lows, remove and reinsert the battery inside the console. If Reset 24 hour option is selected, the highs and lows will reset 24 hours after the battery is inserted. 4.3 Sensor Resynchronization If the remote sensor is lost, dashes will be displayed. To resynchronize, press both the °C / °F and High / Low Record buttons at the same time for five seconds. While in the search mode, the reception search icon flash. 4.3.1 Best Practices for Wireless Communication Note: To insure proper communication, mount the remote sensor on a vertical surface, such as a wall. Do not lay the sensor flat. Wireless communication is susceptible to interference, distance, walls and metal barriers. We recommend the following best practices for trouble free wireless communication. 1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer monitors and TVs. 2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and communication is intermittent, try turning off these other devices for troubleshooting purposes. You may need to relocate the transmitters or receivers to avoid intermittent communication. 3. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or walls) but typically you will get 100 feet maximum under most real-world installations, which include passing through barriers or walls. 4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight. The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below. Glass (untreated) Plastics Wood Brick Version 1.0 Medium RF Signal Strength Reduction 5-15% 10-15% 10-40% 10-40% Page 5 Concrete Metal 40-80% 90-100% 5 Glossary of Terms Accuracy Term Hygrometer Range Definition Accuracy is defined as the ability of a measurement to match the actual value of the quantity being measured. A hygrometer is a device that measures relative humidity. Relative humidity is a term used to describe the amount or percentage of water vapor that exists in air. Range is defined as the amount or extent a value can be measured. 6 Specifications 6.1 Wireless Specifications Line of sight wireless transmission (in open air): 265 feet, 100 feet under most conditions. Frequency: 433 MHz Update Rate: 48 seconds 6.2 Measurement Specifications The following table provides specifications for the measured parameters. Measurement Indoor Temperature Outdoor Temperature Indoor Humidity 6.3 Range 14 to 140 °F -40 to 140 °F 1 to 99 % Accuracy ± 1 °F ± 1 °F ± 3% (only guaranteed between 20 to 90%) Resolution 0.1 °F 0.1 °F 1% Power Consumption Base station (display console) : 1 x AA Alkaline or Lithium batteries (not included) Remote sensor : 1 x AA 1.5V Alkaline or Lithium batteries (not included) Battery life: About 2 years for base station with one sensor and excellent reception. Intermittent reception and multiple sensors may reduce the battery life. Minimum 12 months for thermometer sensor (use lithium batteries in cold weather climates less than -4 °F ) 7 Troubleshooting Guide Problem Wireless remote (thermometer) not reporting in to console. There are dashes (--.-) on the display console. Version 1.0 Solution If sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal, To resynchronize, press both the °C / °F and High / Low Record buttons at the same time for five seconds., and the remote search icon Page 6 will flash. Once the signal Problem Solution is reacquired, the remote search icon and the current values will be displayed. will turn on, The maximum line of sight communication range is 265’ and 100’ under most conditions. Move the sensor assembly closer to the display console. If the sensor assembly is too close (less than 5’), move the sensor assembly away from the display console. Make sure the remote sensor transmitter light is flashing once per 60 seconds. Install a fresh set of batteries in the remote thermometer. For cold weather environments, install lithium batteries. Make sure the remote sensors are not transmitting through solid metal (acts as an RF shield), or earth barrier (down a hill). Move the display console around electrical noise generating devices, such as computers, TVs and other wireless transmitters or receivers. Temperature sensor reads too high in the day time. Indoor and Outdoor Temperature do not agree Move the remote sensor to a higher location. Move the remote sensor to a closer location. Make sure the thermometer is mounted in a shaded area on the north facing wall. Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature sensors should agree within 2 °F (the sensor accuracy is ± 1 °F ). Use the calibration feature to match the indoor and outdoor temperature to a known source. Replace console batteries with a fresh set of batteries. Display console contrast is weak 8 Liability Disclaimer Please help in the preservation of the environment and return used batteries to an authorized depot. The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment. Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. The specifications of this product may change without prior notice. Version 1.0 Page 7 This product is not a toy. Keep out of the reach of children. No part of this manual may be reproduced without written authorization of the manufacturer. 9 FCC Statement Statement according to FCC part 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Statement according to FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Version 1.0 Page 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : EE Title : For basic settings the following menu is started by touching the touch-screen in the center of the text display Create Date : 2017:07:24 19:33:37Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2017:07:25 10:25:18+08:00 Metadata Date : 2017:07:25 10:25:18+08:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:a12beefc-4682-4ecd-9d80-27b29c725065 Instance ID : uuid:623ebd59-d6bb-48d3-a388-5c22d8e55eae Page Count : 8 Author : EEEXIF Metadata provided by EXIF.tools