Firetide 3600-2 HotPort 3600-5000 User Manual SR 5 Users Manual

Firetide Inc. HotPort 3600-5000 SR 5 Users Manual

Contents

SR 5 Users Manual

Download: Firetide 3600-2 HotPort 3600-5000 User Manual SR 5 Users Manual
Mirror Download [FCC.gov]Firetide 3600-2 HotPort 3600-5000 User Manual SR 5 Users Manual
Document ID642769
Application IDqWX1Q5KoUe/u7e64nvJcIQ==
Document DescriptionSR 5 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.89kB (311135 bits)
Date Submitted2006-03-31 00:00:00
Date Available2006-03-31 00:00:00
Creation Date2005-05-25 15:26:13
Producing SoftwareMac OS X 10.3.3 Quartz PDFContext
Document Lastmod2006-02-01 13:07:40
Document TitleSR 5 Users Manual
Document CreatorOmniGraffle Pro

Ubiquiti Networks, Inc.
778 N. First St.
San Jose, CA 95112
(408)-385-1103
SR5 MANUAL
MODULAR USAGE
The SR5 hi-power mini-PCI 802.11a radio card module has been specifically
designed for use in outdoor wireless applications where additional link gain is
critical. It is compatible with existing Atheros linux drivers and is capable of
operation in the 5725-5850 MHz frequency range. Power and frequency limits
are hard programmed into the radio card EEPROM, but card compatibility can
be achieved with any Atheros Linux based software. Many SBC host platforms
have been qualified for use with the SR5 module including:
-Mikrotik Router Boards
-PC Engines WRAP boards
-Many SBC platforms from large telecommunication companies
It is necessary that the system integrators perform all applicable retesting and
certification for their final system configurations.
EXAMPLE OEM SYSTEM USAGE
PC ENGINES
WRAP Wireless
Router Board
Pac Wireless Roo Tenna
Antenna/Enclosure
Software Driver
ATHEROS
PUBLIC
MADWIFI Driver
SR5
SR5 IMPORTANT MODULAR APPROVAL INFORMATION
This device is intended only form OEM integrator under the following conditions:
1) The antenna must be installed such that 20cm is maintained between the antenna and
users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be
installed such that 20 cm may be maintained between the antenna and users (for example
access points, routers, wireless ADSL modems, and similar equipment). The final end
product must be labeled in visible area with the following:
“Contains TX FCC ID SWX-SR5:
End Product Manual Information
The user manual for end users must include the following information in a prominent
location “IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.”
SR5
IMPORTANT OPERATION INFORMATION
Safety Information
20 cm

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a624b114-6151-422f-86e8-fbe420eb99e0
Producer                        : Mac OS X 10.3.3 Quartz PDFContext
Modify Date                     : 2006:02:01 13:07:40-05:00
Create Date                     : 2005:05:25 15:26:13-07:00
Creator Tool                    : OmniGraffle Pro
Metadata Date                   : 2006:02:01 13:07:40-05:00
Document ID                     : uuid:71d46532-cd6c-11d9-893e-000a95a4d1e0
Format                          : application/pdf
Creator                         : OmniGraffle Pro
EXIF Metadata provided by EXIF.tools

SR5 Users Manual

Download: Firetide 3600-2 HotPort 3600-5000 User Manual SR 5 Users Manual
Mirror Download [FCC.gov]Firetide 3600-2 HotPort 3600-5000 User Manual SR 5 Users Manual
Document ID642800
Application IDVJsE5UtI47UzZCw2HdwUmQ==
Document DescriptionSR5 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.89kB (311135 bits)
Date Submitted2006-03-31 00:00:00
Date Available2006-03-31 00:00:00
Creation Date2005-05-25 15:26:13
Producing SoftwareMac OS X 10.3.3 Quartz PDFContext
Document Lastmod2006-02-01 13:07:40
Document TitleSR5 Users Manual
Document CreatorOmniGraffle Pro

Ubiquiti Networks, Inc.
778 N. First St.
San Jose, CA 95112
(408)-385-1103
SR5 MANUAL
MODULAR USAGE
The SR5 hi-power mini-PCI 802.11a radio card module has been specifically
designed for use in outdoor wireless applications where additional link gain is
critical. It is compatible with existing Atheros linux drivers and is capable of
operation in the 5725-5850 MHz frequency range. Power and frequency limits
are hard programmed into the radio card EEPROM, but card compatibility can
be achieved with any Atheros Linux based software. Many SBC host platforms
have been qualified for use with the SR5 module including:
-Mikrotik Router Boards
-PC Engines WRAP boards
-Many SBC platforms from large telecommunication companies
It is necessary that the system integrators perform all applicable retesting and
certification for their final system configurations.
EXAMPLE OEM SYSTEM USAGE
PC ENGINES
WRAP Wireless
Router Board
Pac Wireless Roo Tenna
Antenna/Enclosure
Software Driver
ATHEROS
PUBLIC
MADWIFI Driver
SR5
SR5 IMPORTANT MODULAR APPROVAL INFORMATION
This device is intended only form OEM integrator under the following conditions:
1) The antenna must be installed such that 20cm is maintained between the antenna and
users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be
installed such that 20 cm may be maintained between the antenna and users (for example
access points, routers, wireless ADSL modems, and similar equipment). The final end
product must be labeled in visible area with the following:
“Contains TX FCC ID SWX-SR5:
End Product Manual Information
The user manual for end users must include the following information in a prominent
location “IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.”
SR5
IMPORTANT OPERATION INFORMATION
Safety Information
20 cm

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a624b114-6151-422f-86e8-fbe420eb99e0
Producer                        : Mac OS X 10.3.3 Quartz PDFContext
Modify Date                     : 2006:02:01 13:07:40-05:00
Create Date                     : 2005:05:25 15:26:13-07:00
Creator Tool                    : OmniGraffle Pro
Metadata Date                   : 2006:02:01 13:07:40-05:00
Document ID                     : uuid:71d46532-cd6c-11d9-893e-000a95a4d1e0
Format                          : application/pdf
Creator                         : OmniGraffle Pro
EXIF Metadata provided by EXIF.tools
FCC ID Filing: REP-3600-2

Navigation menu