First Act M2A 110 Users Manual
M2A-110 to the manual 3c71232a-0203-4173-b54f-4768b8e4693b
2015-01-23
: First-Act First-Act-M2A-110-Users-Manual-221767 first-act-m2a-110-users-manual-221767 first-act pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
IMPORTANT SAFETY INSTRUCTIONS Please read carefully before operating your amplifier: Follow these basic precautionary measures to ensure a longer life for your amplifier, and to reduce the risk of electric shock. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. The apparatus should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on apparatus. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, maintaining a minimum distance of 10cm around the appartus. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. No naked flame sources such as lighted candles should be placed on the appartus. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTENIING FLASH WITH ARROWHEAD SYMBOLS, WITH AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSISTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. WARNING: EXCESSIVE SOUND PRESSURE FROM EARPHONES AND HEADPHONES CAN CAUSE HEARING LOSS. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. MAINS PLUG IS USED AS DISCONNECT DEVICE AND IT SHOULD REMAIN READILY OPERABLE DURING INTENTED USE. IN ORDER TO DISCONNECT THE APPARATUS FROM THE MAINS COMPLETELY, THE MAINS PLUG SHOULD BE DISCONNECTED FROM THE MAINS SOCKET COMPLETELY. THE APPARATUS SHALL BE CONNECTED TO MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION. First Act Inc. 745 Boylston Street Boston, MA 02116 USA firstact.com Guitar Case 10 & 20ft Cables Auto Tuner Picks Books Guitar Strings Stringwinder OTHER FIRST ACT® PRODUCTS : M2A-110 AMPLIFIER INSTRUCTION MANUAL Customer Assistance Phone: 888.551.1115 Email: info@firstact.com First Act and the First Act logo are trademarks of First Act Inc. US Patent No. D487,627 ©2008 First Act Inc. All rights reserved. M2A110.M.06 FACEPLATE 1 2 3 4 5 6 7 8 BACKPLATE 9 10 11 12 1. INPUT JACK Connect instrument cable here (1/4 inch jack). 7. MIDDLE Adjusts middle frequency output. 2. MASTER VOLUME Controls the total output level of amplifier. 8. BASS Adjusts low frequency output. 3. GAIN Controls the input level. Increasing gain adds distortion, or an overdriven rock tone; decreasing gain produces a cleaner sound. Gain knob is functional when Overdrive button is engaged. 9. POWER On/off switch. 4. OVERDRIVE ON/OFF SWITCH ON selects the Overdrive (distortion) channel, OFF selects the Clean channel. The GAIN knob interacts with the overdrive button, allowing the user to add the desired amount of distortion. 11. AUDIO IN Input jack for external audio device such as CD, MP3, or cassette player (device should have its own volume control). 5. LED Indicates power on /off. 10. PHONES Connects to stereo headphones, which cancels speaker output. 12. POWER INPUT / FUSE COMPARTMENT Connection for power cable. Use only the power cable supplied with this amplifier. See instructions below for replacing the fuse. 6. TREBLE Adjusts high frequency output. SPECIFICATIONS Output Power: 10 watts RMS Frequency Range: 40 Hz ~ 8 kHz Speaker: 6.5" / 25W / 8 ohms Input Sensitivity: 26 mV Power Supply: Detachable, UL-approved power cable Dimensions: (LxWxH) 12" x 7.4" x 12" Weight: 12 lbs. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REPLACING THE FUSE The fuse compartment contains an active fuse. The fuse protects against power surges. If your amplifier does not power up as usual, this fuse may need to be replaced. If the fuse fails: 1. Turn the amplifier power off. 2. Unplug the amplifier. 3. Detach the power cord and set aside. 4. Carefully insert a flathead screwdriver to open the fuse compartment. Be careful not to break the fuse inside. 5. Remove the blown fuse from the inner (active) slot. 6. Replace with a 250V, 500mA fuse. 7. Close the fuse compartment. 8. Discard the blown fuse. Open the fuse compartment. Note: If you replace the fuse and the amplifier still does not power up, have the unit checked by a qualified repairperson. ACTIVE FUSE CAUTION REPLACE ONLY WITH SAME TYPE 250V, 500mA FUSE. USING ANOTHER TYPE IS A POTENTIAL FIRE HAZARD. Remove the blown fuse from the inner (active) slot.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24 Create Date : 2008:05:28 17:00:48-04:00 Metadata Date : 2008:05:28 17:01:13-04:00 Modify Date : 2008:05:28 17:01:13-04:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8169 bytes, use -b option to extract) Instance ID : uuid:a9f923a4-ff67-49f5-b810-0d18eefffa07 Document ID : adobe:docid:indd:4c8c9d7e-f11a-11dc-8e94-9cd83d121112 Rendition Class : proof:pdf Derived From Instance ID : 11db8ff6-f8b3-11db-b3e9-bfc4130a1b2a Derived From Document ID : adobe:docid:indd:adfb5675-f5a2-11db-8278-8887b7b2c527 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:AAFAA7392E5E11DDAEC1DABF33E1ED4D, uuid:14FBE74669EB11DBAEBBADA2362898C2, uuid:3F97C8C1F5B111DBAE778418B0F4831E, uuid:3F97C8B9F5B111DBAE778418B0F4831E, uuid:F91AD4586A8311DBB89BD35415E65B4F, uuid:DFB553E16A8311DBB89BD35415E65B4F, uuid:DFB553DD6A8311DBB89BD35415E65B4F, uuid:DFB553D96A8311DBB89BD35415E65B4F, uuid:a1dec100-cfc3-11da-a23e-000d93428820, uuid:798ec7b0-f80d-11dc-8a78-0016cb37b368 Manifest Reference Document ID : adobe:docid:photoshop:699d423a-ba86-11da-8061-ba8ef7ccad91, adobe:docid:photoshop:be911e04-bb24-11da-9ce9-93f6ef49de10, uuid:77D115A0D1EE11DAAD0BDF679816D4F8, adobe:docid:photoshop:a02e57ab-bf0f-11da-a39d-99472bf7da77, adobe:docid:photoshop:65d9370a-c238-11da-8b59-9b60eb90e7b5, adobe:docid:photoshop:adc29049-bb2c-11da-9ce9-93f6ef49de10, uuid:D869D8CCD06311DAAD0BDF679816D4F8, adobe:docid:photoshop:ccfa9d9d-bb22-11da-9ce9-93f6ef49de10, uuid:E70C1149CE0311DA9B49DE7C284FF3C5, uuid:E70C114BCE0311DA9B49DE7C284FF3C5 Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools