First Alert 20 A 120 B C Commercial Grade Msds SECTION I

First-Alert-4-A-60-B-C-Rechargeable-Commercial-Msds-781434 first-alert-4-a-60-b-c-rechargeable-commercial-msds-781434

2015-07-28

: First-Alert First-Alert-20-A-120-B-C-Commercial-Grade-Msds-781429 first-alert-20-a-120-b-c-commercial-grade-msds-781429 first-alert pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadFirst-Alert First-Alert-20-A-120-B-C-Commercial-Grade-Msds- SECTION I  First-alert-20-a-120-b-c-commercial-grade-msds
Open PDF In BrowserView PDF
MATERIAL SAFETY DATA SHEET
IDENTITY- ABC DRY CHEMICAL
SECTION I. Chemical Product and Company Identification
Product Name:
Synonym:
Manufacturer:
Telephone:
Emergency:

ABC Dry Chemical Fire Extinguishant
Multi-purpose Dry Chemical
Buckeye Fire Equipment Company
110 Kings Road
Kings Mountain, NC 28086
704.739.7415
CHEMTREC 1.800.424.9300

Revision Date:

07/12/04

SECTION II. Hazard Identification and Emergency Overview
Emergency Overview: Product is a light yellow, fine solid powder that is odorless.
Adverse Health Effects and Symptoms: Product is a moderate irritant to the respiratory system and eyes; a
mild irritant to the skin. Symptoms may include shortness of breath, coughing, and irritation to the eyes,
lungs, and skin. Ingestion may cause gastric irritation, nausea, and diarrhea.
Exposure Guidelines:
OSHA PEL

ACGIH TLV

Monoamonium phosphate

Particulates Not Otherwise Classified
Total Dust- 15 mg/m³
Respirable Fraction- 5 mg/m³

Particulates Not Otherwise Classified
Total Dust- 10 mg/m³
Respirable Fraction- 3 mg/m³

Barium sulfate

Particulates Not Otherwise Classified
Total Dust- 15 mg/m³
Respirable Fraction- 5 mg/m³
6 mg/m³
6 mg/m³
.1 mg/m³
Not Regulated
Not Regulated

Particulates Not Otherwise Classified
Total Dust- 10 mg/m³
Respirable Fraction- 3 mg/m³
3 mg/m³
10 mg/m³
.1 mg/m³
Not Regulated
Not Regulated

Mica
Silica
Stanous ocetate
Silicone
Pigment

Hazard Symbols:
HMIS RATINGS:
Health
1
Flammability
0
Reactivity
0
Personal Protective Equipment: use N-95 dust mask (See Section 8)
WHMIS (Canadian Workplace Hazardous Materials Identification)
D2B- May irritate eyes, mucous membranes, and/or skin
SECTION III. Composition/Information on Ingredients
Monoammonium phosphate
Barium Sulfate
Mica
Silica
Stanous ocetate
Silicone
Pigment

Weight %*
85
10
<3
<2
< .3
< .1
< .1

CAS #
7722-76-1
7727-43-7
12001-26-2
7631-86-9
301-10-0
63148-57-2
6358-31-2

* % is rounded to the nearest appropriate number. Values are not to be considered product specifications

Page 1 of 4

MATERIAL SAFETY DATA SHEET
IDENTITY- ABC DRY CHEMICAL
SECTION IV. First Aid Measures
Eye Exposure- Flush eyes with water until pain-free. If irritation develops or persists, seek medical
attention.
Skin Exposure- Wash with plenty of soap and water. If irritation develops or persists, seek medical
attention.
Inhalation- Move victim to fresh air. If irritation develops or persists, seek medical attention.
Ingestion- If victim is conscious and alert, give 2-3 glasses of water to drink. Do not induce vomiting. If
vomiting occurs and the victim is conscious, give additional water to further dilute the chemical. Prevent
aspiration of swallowed product by laying victim on side with head lower than their waist. Seek medical
attention. Do not leave victim unattended.
Medical Conditions Possibly Aggravated by Exposure- Inhalation of the product may aggravate existing
chronic respiratory conditions such as asthma, emphysema, or bronchitis. Contact with the skin may
aggravate an existing skin disease. Chronic overexposure may cause pneumoconiosis (“Dusty Lung”
disease).
SECTION V. Firefighting Measures
Extinguishing Media: N/A. This product is an extinguishing agent. It is nonflammable and noncombustible.
Special Firefighting Procedures: N/A
Unusual Fire and Explosion Hazards: This product may decompose in fire and release oxides of carbon,
potassium, and nitrogen (Refer to Section X).
Sensitivity to Mechanical Impact or Static Discharge: None
SECTION VI. Accidental Release Measures
In case of accidental release, use the appropriate respiratory protection. Clean up the product using a
vacuum or wet sweep and shovel to minimize the generation of dust. Bag or drum the product for disposal.
If the product is used and/or contaminated, use personal protective equipment and containment means that
are appropriate for the composition of the mixture. Product should be prevented from entering waterways.
SECTION VII. Handling and Storage
Avoid eye, respiratory, and skin exposure. Use the appropriate personal protective equipment when
handling. Wash thoroughly after handling (Refer to Section VIII). Product should be stored in its original
container or extinguisher. When the product is contained under pressure (e.g., an extinguisher), inspect the
container for rust or damage that may compromise the container integrity. Do not store the product in high
humidity and do not mix with other extinguishing agents, particularly potassium bicarbonate based agents.
SECTION VIII. Exposure Controls and Personal Protection
During the use of this product on fires, exhaust gases and products of incomplete combustion are the main
respiratory hazards. In the manufacture of this product, employers and employees must use their collective
judgment in determining the on-the-job settings where the use of a dust mask or respirator is prudent. The
need for respiratory protection is not likely for short-term use in well-ventilated areas.
Respiratory Protection: Use an N-95 dust mask for limited exposures and use air-purifying respirators with
high efficiency particulate air filters (HEPA filters) for prolonged exposures.
Eye Protection: Wear chemical goggles or full-face air-purifying respirator.

Page 2 of 4

MATERIAL SAFETY DATA SHEET
IDENTITY- ABC DRY CHEMICAL
Skin Protection: Use nitrile, latex, or similar gloves and coveralls. Good personal hygiene practices are
essential. After handling the product, avoid food, tobacco products, or other means of transferring the
product from hand to mouth until after thoroughly washing.
SECTION IX. Physical and Chemical Properties
Appearance and Odor: Light yellow fine powder that is odorless.
Apparent Density: 0.82
Solubility: The product is coated with water repellant silicone. Not immediately soluble in water.
pH: Approximately 4 -5
Flash Point: N/A
Flammability: N/A
Vapor Pressure: N/A
Boiling Point: N/A
Explosive or Oxidizing Properties: None
SECTION X. Stability and Reactivity
Stability: Stable
Incompatibles: Magnesium, strong oxidizers such as calcium hypochlorite (pool chlorine), strong alkalis,
and isocyanuric acids.
Decomposition Products: This product may decompose in fire and release carbon monoxide, carbon
dioxide, and sulfur dioxide. Oxides of phosphorous and ammonia have been reported.
Hazardous Polymerization: Will not occur
Hazardous Reactions: None
SECTION XI. Toxicological Information
Acute Toxicity:

Monoammonium phosphate LD50 (rat): > 1000mg/kg body weight.
Target organs in humans: respiratory system, eyes, and skin. This product is an irritant to
epithelial tissue and may aggravate dermatitis. No indication that the product causes
sensitization.

Chronic Toxicity: Pneumoconiosis, or “Dusty Lung” disease, may result from chronic exposure to any dust.
Reproductive Toxicity: This product is not known to have any reproductive effects.
SECTION XII. Ecological Information
Ecotoxicity: Negative effects are unknown. Provides nutrient nitrogen and phosphorous to plant life.
Degradability: Degrades rapidly in wet or humid environment.
Bioaccumulation: Unknown extent.
Mobility in Soil: Water-soluble. May leech in to groundwater.
SECTION XIII. Considerations for Disposal
This product is not a RCRA characteristically hazardous or listed hazardous waste. Dispose of according to
state or local laws, which may be more restrictive than federal regulations. Be aware that product used on a
fire may be altered or contaminated and thereby require different disposal considerations.
SECTION XIV. Transportation Information
This product is not defined as a hazardous material under U.S. Department of Transportation 49 CFR 172,
or by Transport Canada “Transportation of Dangerous Goods” regulations.

Page 3 of 4

MATERIAL SAFETY DATA SHEET
IDENTITY- ABC DRY CHEMICAL
SECTION XV. Regulatory Information
International Inventory Status: All ingredients are on the following inventories
Country
U.S.A.
Canada
Europe
Australia
Japan
South Korea

Agency
TSCA
DSL
EINECS/ELINCS
AICS
MITI
KECL

European Risk and Safety Phrases:
EU ClassificationHarmful
R Phrases-

22
Harmful if swallowed
36/37/38Irritating to eyes, respiratory system, and skin.

S Phrases-

26
36

In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice
Wear suitable protective clothing

U.S. Federal Regulatory Information:
None of the chemicals in this product are under SARA reporting requirements or have SARA
Threshold Planning Quantities or CERCLA Reportable Quantities, or are regulated under TSCA
8(d).
State Regulatory Information:
Chemicals in this product are covered under the specific State regulations noted:
Alaska
Designated Toxic and Hazardous Substances- None
California
Permissible Exposure Limits for Chemical Contaminants- None
Florida
Substance list- Mica dust
Illinois
Toxic Substance List- None
Kansas
Section 302/303 List- None
Massachusetts
Substance list- Mica dust
Minnesota
List of Hazardous Substances- None
Missouri
Employer Information/Toxic Substance List- None
New Jersey
Right to Know Hazardous Substance List- None
North Dakota
List of Hazardous Chemicals, Reportable Quantities- None
Pennsylvania
Hazardous Substance List- None
Rhode Island
Hazardous Substance List- Mica dust
Texas
Hazardous Substance List- No
West Virginia
Hazardous Substance List- None
Wisconsin
Toxic and Hazardous Substances- None
California Proposition 65- No component is listed on the California Proposition 65 List

SECTION XVI. Other Information
This MSDS conforms to the requirements under U.S., U.K., Canadian, Australian, and EU Regulations or
Standards. It conforms to the proposed 2003 ANSI Z400.1 format.
The information contained herein is given in good faith as typical values and not as product specifications.
No warranty, either expressed or implied, is hereby made.

Page 4 of 4



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Author                          : BFE
Create Date                     : 2004:07:29 19:16:42Z
Modify Date                     : 2014:03:05 15:18:31-06:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2014:03:05 15:18:31-06:00
Creator Tool                    : Acrobat PDFMaker 5.0 for Word
Document ID                     : uuid:c221215f-fe92-4731-9850-e6f7d7245a77
Instance ID                     : uuid:379626f3-726a-42d4-bbfa-42ff5eaf2b80
Format                          : application/pdf
Creator                         : BFE
Title                           : SECTION I
Page Mode                       : UseNone
Page Count                      : 4
EXIF Metadata provided by EXIF.tools

Navigation menu