First Computer KR2WG Notebook Computer with WiFi User Manual KR2W Manual Final

First International Computer Inc Notebook Computer with WiFi KR2W Manual Final

Manual

1  FIC  KR2W  User Guide
Notebook User Guide 2  Copyright©2005 All Rights Reserved - Printed in Taiwan  Notebook Computer User Guide Original Issue: 2005/8  This manual guides you in setting up and using your new notebook computer. Information in this manual has been carefully checked for accuracy and is subject to change without notice. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without prior written permission. Trademarks Product names used herein are for identification purposes only and may be the trademarks of their respective companies. Microsoft, Windows XP, and Windows Sound System are trademarks of Microsoft Corporation. AMD and AMD TurionTM 64 Mobile Technology are registered trademark of Advanced Micro Devices, Inc. Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology. All other brands or product names mentioned in this manual are trademarks or registered trademarks of their respective companies.
Notebook User Guide 3  FCC Information to User Safety and Care Instructions No matter what your level of experience with computers, please make sure you read the safety and care instructions. This information can help protect you and your computer from possible harm. Radio and television interference Warning: Use the specified shielded power cord and shielded signal cables with this computer, so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the device and receiver • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help.
Notebook User Guide 4  You may find helpful the following booklet, prepared by the Federal Communications Commission: Interference Handbook (stock number 004-000-00345-4). This booklet is available from the U.S. Government Printing Office, Washington, DC20402 Warning: The user must not modify or change this computer without approval. Modification could void authority to this equipment. FCC RF Exposure FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 15.247 (b)(4), the EUT meets the requirement that it be operated in a manner that ensures the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines (1.1307, 1.1310, 2.1091 and 2.1093) Canadian Department of Communications Compliance Statement This Class B digital apparatus meets all requirement of the Canadian Interference-Causing Equipment Regulations. Shielded Cables Notice All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Notebook User Guide 5  Peripheral Devices Notice Only peripherals (input/output devices, terminals, printers, etc) certified to comply with Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Optical Disk Drive Notice The optical disk drive is Class 1 Laser Product. Caution Changes or modifications not expressly approved by the manufacturer may void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer. Use Conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. European Notice  For the following equipment: Notebook PC     Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Lowvoltage Directive (73/23/EEC) and the Amendment Directive
Notebook User Guide 6  (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards: EN 300 328-2 V.1.6.1: 2004   EN 301 489-17 V1.2.1: 2002   EN 50371: 2002   EN 55022: 1998+A1 2000+A2 2003   EN 55024:1998+A1 2001+A2 2003   EN 60950: 2000   EN 61000-3-2: +A1 2001   EN 61000-3-3: 2002  802.11b Restrictions: - European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; - In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use." For DVD Players with both 525p and 625p progressive scan outputs: ‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN
Notebook User Guide 7  THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.’  “This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.” “U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.”
Notebook User Guide 8  About Your Notebook Computer   Congratulation for having purchased your new Professional Multimedia Notebook. This notebook incorporates the strongest features, which integrate the latest technologies available in the notebook industry. Your new notebook computer not only drives today  multimedia applications but also be ready for tomorrow  exciting new software. This Professional Multimedia Notebook is a freedom, flexibility, and functionality notebook which users are demanding for a long time.
Notebook User Guide 9  About Your User Guide  Welcome to your Professional Multimedia Notebook User Guide. This manual covers everything you need to know in learning how to use your computer. This manual also assumes that you know the basic concepts of Windows and the PC. You will start doing a lot of great and fun things with your computer.  This manual is divided into eight chapters.  Chapter 1  gives introduction on your computer features. Chapter 2  provides step-by-step instructions to help you begin using your notebook as quickly as possible.  Chapter 3  describes how to operate the standard features of your computer. Chapter 4  illustrates how to integrate video and sound chips into impressive presentation. Chapter 5  illustrates how to connect external device to your computer. Chapter 6  explains how to use the System BIOS Setup program. Chapter 7  explains how to use the internal module options of your computer. Chapter 8  offers instructions on how to care and maintain your notebook.
Notebook User Guide 10  Table of Contents ABOUT YOUR NOTEBOOK COMPUTER....................................... 8 ABOUT YOUR USER GUIDE................................................................. 9 1 INTRODUCTION............................................................................. 15 1.1 FEATURE HIGHLIGHT .................................................................... 16 1.2 UNPACKING THE COMPUTER ......................................................... 18 1.3 THE INSIDE OF THE NOTEBOOK ..................................................... 19 Notebook Status Icons .................................................................. 21 The Function of Easy Buttons ...................................................... 24 1.4 THE FRONT SIDE OF THE NOTEBOOK............................................. 25 1.5 THE REAR SIDE OF THE NOTEBOOK............................................... 26 1.6 THE LEFT SIDE OF THE NOTEBOOK................................................ 27 1.7 THE RIGHT SIDE OF THE NOTEBOOK ............................................. 28 1.8 THE UNDERSIDE OF THE NOTEBOOK ............................................. 30 1.9 NOTEBOOK ACCESSORIES.............................................................. 32 1.10 NOTEBOOK OPTIONS ..................................................................... 33 2 GETTING STARTED ...................................................................... 35 2.1 USING THE BATTERY PACK ........................................................... 36 Extending Battery Life.................................................................. 38 2.2 CONNECTING THE AC POWER SOURCE.......................................... 38 2.3 STARTING YOUR COMPUTER......................................................... 40 2.4 ADJUSTING THE DISPLAY CONTROLS ............................................ 41 2.5 INSTALLING THE NOTEBOOK DEVICE DRIVERS ............................. 41 Installing Windows XP from Optical Disk Drive......................... 41 driver installation note:................................................................ 42 Installing the Chipset Driver........................................................ 42
Notebook User Guide 11  Installing the VGA Device Driver ................................................ 42 Installing the Azalia Hotfix Driver............................................... 44 Installing the Audio Device Driver............................................... 44 Installing the Modem Device Driver............................................ 45 Installing ENE - Keyboard Controller driver .............................. 45 Installing ALPS - Touch Pad driver ............................................. 46 Installing the Wireless LAN Device Driver and Utility......................................46 Installing the LAN Device Driver................................................. 46 Installing Cardreader Device Driver........................................... 47 Installing Slient Mode utility ........................................................ 48 2.6 TURNING OFF YOUR COMPUTER.................................................... 42 3 USING YOUR NOTEBOOK........................................................... 49 3.1 STARTING YOUR OPERATING SYSTEM........................................... 50 3.2 UNDERSTANDING THE KEYBOARD FUNCTIONS.............................. 50 Basic Keyboard Functions ........................................................... 53 Cursor Control Keys..................................................................... 54 Screen Control Keys..................................................................... 55 Windows Hot Keys........................................................................ 55 Special Function Keys .................................................................. 55 3.3 USING THE GLIDE PAD POINTING DEVICE ....................................... 56 3.4 CONFIGURING YOUR SCREEN DISPLAY ......................................... 58 Possible Display Configurations.................................................. 59 Changing the Display Properties under Windows.................................. 60 3.5 KNOWING THE POWER SAVING FEATURES .................................... 60 3.6 WORKING WITH THE BUILT-IN HDD............................................... 62 3.7 HOW TO ACCESS THE OPTICAL DRIVE........................................... 62 3.8 EXPRESSCARD............................................................................... 64 What is ExpressCard ? ................................................................. 64 Inserting and Removing a ExpressCard....................................... 66 3.9 USING FLASH MEMORY CARDS ..................................................... 69
Notebook User Guide 12  What is Flash Memory Card? ...................................................... 69 4 FUN WITH MULTIMEDIA.................................................................. 73 4.1 NOTEBOOK MULTIMEDIA FEATURES............................................. 74 4.2 AUDIO SOUND SYSTEM FEATURES ................................................ 74 4.3 SETTING UP THE AUDIO DRIVER PROPERTIES................................ 75 4.4 WINDOWS MULTIMEDIA PROGRAMS ............................................. 75 4.5 RECORDING SOUNDS ..................................................................... 76 Using an External Microphone.................................................... 79 Using the Built-in Combo Drive................................................... 79 4.6 PLAYING AUDIO AND SOUND ........................................................ 80 Using the Windows Media Player................................................ 81 4.7 PLAYING VIDEO AND MPEG FILES ............................................... 81 4.8 USING DVD .................................................................................. 82 5 CONNECTING TO PERIPHERALS............................................. 85 5.1 USING THE USB PORT................................................................... 86 5.2 USING AN EXTERNAL MONITOR PORT .................................................. 87 5.3 USING THE IEEE 1394 PORT ......................................................... 88 5.4 USING THE TV PORT ..................................................................... 89 5.5 USING THE EXTERNAL AUDIO SYSTEM ......................................... 90 5.6 USING THE LAN PORT .................................................................. 91 5.7 USING THE WIRELESS LAN........................................................... 92 5.8 USING THE MODEM PORT.............................................................. 93 6 CUSTOMIZING YOUR NOTEBOOK.............................................. 95 6.1 RUNNING THE BIOS SETUP PROGRAM .......................................... 96 6.2 USING THE MAIN MENU SETUP ..................................................... 98 6.2.1 Internal HDD Sub-Menu................................................. 100 6.3 USING THE ADVANCED CMOS SETUP......................................... 102 6.4 SECURITY MENU SETUP .............................................................. 103
Notebook User Guide 13  6.5 USING THE BOOT SETUP .............................................................. 105 6.6 HOW TO EXIT THE SETUP PROGRAM............................................ 106 6.7 HOW TO UPGRADE THE BIOS...................................................... 107 7 USING OPTIONS ........................................................................... 109 SYSTEM UPGRADE................................................................................. 110 7.1 MEMORY UPGRADE..................................................................... 110 Installing Memory Module ......................................................... 111 7.2 HARD DISK UPGRADE.................................................................. 112 7.3 WIRELESS MODULE INSTALLATION............................................. 113 8 CARING FOR YOUR NOTEBOOK............................................ 115 8.1 IMPORTANT SAFETY INSTRUCTIONS ............................................ 116 8.2 CLEANING YOUR COMPUTER....................................................... 118 8.3 MAINTAINING THE LCD QUALITY............................................... 119 8.4 MAINTAINING YOUR HARD DISK ................................................ 119 8.5 BATTERY CARE GUIDELINES ....................................................... 120 8.6 WHEN YOU TRAVEL.................................................................... 121 APPENDIX A  SYSTEM SPECIFICATION...................................... 123 Processor Unit............................................................................ 124 System Memory........................................................................... 124 LCD Display............................................................................... 124 VGA System ................................................................................ 124 Storage........................................................................................ 125 Audio System .............................................................................. 125 ExpressCard ............................................................................... 125 Glide Pad.................................................................................... 125 Keyboard .................................................................................... 126 Flash BIOS ................................................................................. 126 I/O Ports ..................................................................................... 126
Notebook User Guide 14  Wireless devices ......................................................................... 126 AC/DC Power Supply Adapter................................................... 126 Battery ........................................................................................ 126 Weight and Dimension ............................................................... 127
Introduction1 15  1 Introduction  Your Notebook PC is a fully Windows compatible portable personal computer. With the latest features in mobile computing and multimedia technology, this notebook makes a natural traveling companion. With leap of technology and compact, your Notebook PC runs on a whole wide range of general business, personal productivity, entertainment, and professional applications. It is ideal for use in the office, at home, and on the road. Your Notebook PC makes an ideal choice for use in the office, the schoolroom, at home, on the road and all other occasions.
Notebook User Guide 16  1.1 Feature Highlight Before we go to identify each part of your Notebook PC, we will first introduce you to other notable features of your computer. Processing Unit • Your notebook runs on AMD TurionTM or AMD SempronTM  Processor,  that is integrated with 512KB/1M L2 Cache for AMD TurionTM  or 256KB L2 Cache for AMD SempronTM  Processor. Check with your dealer on the CPU type and speed.  • Fully compatible with an entire library of PC software based on operating systems such as Windows XP. Memory This notebook provides two memory slots for installing DDR SDRAM 200-pin SODIMM modules up to 2GB using 256MB, 512MB or 1024MB DDR SDRAM modules.        Wide Screen LCD Display Provides extraordinary 15.4" WXGA 1280 x 800  or 15.4" WSXGA 1680 x 1050 wide screen LCD display. It is the best choice for you to watch DVD movie. Wireless LAN IEEE 802.11b/g, Mini PCI Module Graphic System Provides blazing graphics controller embedded in ATI RS482M chipset.
Introduction1 17  DVD Dual  The DVD Dual device pack combines two standard packs: DVD-RW combo and DVD+RW combo.   IEEE 1394  Provides one IEEE 1394 port for fast data transmission by external hard disk or digital video (DV). (BTO) USB 2.0  Provides four USB2.0 ports for fastest I/O data transmission. Express Card  Provides one ExpressCard slot for faster new-generation PC card solution. Audio System Compliant with Intel HD Audio (Azalia). Sound Blaster compatible. Support 32-bit, multi-channel audio system output.  Flash BIOS Flash BIOS allows you to easily upgrade the System BIOS using the Phoenix Flash utility program.     Power and System Management • Integrated SMM (System Management Mode) on system chipset that shuts down components not in use to reduce power consumption. To execute power management, you can set up the parameter in Power Options properties by pointing your mouse to Control Panel of Windows.
Notebook User Guide 18  • Closing the Notebook computer (lowering the cover) allows you to suspend the system operation instantly and resume at the press of the power button. • System Password for User and Supervisor included on the BIOS SETUP Program to protect unauthorized use of your computer.  1.2  Unpacking the Computer Your computer comes securely packaged in a sturdy cardboard shipping carton. Upon receiving your computer, open the carton and carefully remove the contents. In addition to this User Guide, the shipping carton should also contain the following items:  ; The Notebook Computer ; An AC Adapter and AC Power Cord ; Li-Ion Battery Pack ; Utility Diskettes/CD  ; Hardcopy User Guide/E-book ; Quick Setup Manual Carefully inspect each component to make sure that nothing is missing and/or damaged. If any of these items is missing or damaged, notify your dealer immediately. Be sure to save the shipping materials and the carton in case you
Introduction1 19  need to ship the computer or if you plan to store the computer away sometime in the future.  1.3  The Inside of the Notebook The notebook computer is compact with features on every side. First, look at the inside of the system. The following sections describe inside features.  1. Color Widescreen LCD Display   2.7.  Built-in Stereo Speaker    3. Keyboard  4. Touchpad Pointing Device 5. Easy Buttons  6. Power On/Resume Button  8. LED Indicators    • Color Widescreen LCD Display The notebook computer comes with a color LCD that you can adjust for a
Notebook User Guide 20  comfortable viewing position. The LCD is 15.4” TFT color LVDS with 1280x800 (Wide XGA) or 15.4” TFT color LVDS with 1680 x 1050 (Wide SXGA) resolution panels. The features of the Color LCD Display are summarized as follows:  TFT color LVDS with Widescreen 15.4” 1280x800 (Wide XGA) or 15.4” 1680 x 1050 (Wide SXGA)resolution panels.    Capable of displaying 16M colors (32-bit true color) on either size panels.  LCD display control hot-keys allows you to adjust the brightness of the LCD.  Simultaneous display capability for LCD and external desktop computer monitor.  • Built-in Stereo Speakers Integrated left and right mini stereo speakers for sound and audio output for your multimedia presentations or listening pleasure. • Keyboard  Standard QWERTY-key layout and full-sized 88 keys keyboard with Windows system hot-keys, embedded numeric keypad, 6 hot keys, inverted "T" cursor arrow keys, and separate page screen control keys.  Wide extra space below the keyboard panel for your wrist or palm to sit-on comfortably during typing.
Introduction1 21  • Touchpad Pointing Device Microsoft mouse compatible with two Touchpad click buttons. The two select buttons located at each side support tapping selection and dragging functions. These buttons work like a standard computer mouse. Simply move your fingertip over the Glide Pad to control the position of the cursor. Use the selection buttons below the Glide Pad to select menu items.  • Easy Buttons  There are three easy buttons used for CPU throttling, accessing Internet and Wireless LAN functions instantly and easily. Description of the easy buttons appears in the latter part of this section. • Power On/Resume Button Switches the computer power on and off, or resumes whenever it is in Suspend mode. • LED Indicators Keeps you informed of your notebook computer’s current power status and operating status. Description of the status icons appears in the latter part of this section.      NOTEBOOK STATUS ICONS The Status LED Panel keeps you informed of the notebook’s current power and operating status. Each LED is marked with an icon to designate the system status.
Notebook User Guide 22   1. Power Indicator      2. Battery Charging LED    3. Drive Access  4. Wireless LAN Access 5. Caps Lock  6. Scroll Lock 7. Num Lock • Power Indicator  Lets you know that power to the system is turned on. This LED is positioned so that you can see the power state whether the LCD panel is opened or closed.  Lights green when the system is powered on.  Lights green blinking when the system is in Standby mode.  Lights yellow when the battery power is low.  Lights orange when the battery power is critical low. • Battery Charging LED Lights to indicate battery in charging status.  Lights orange to indicate that the battery is in charging.  Lights orange blinking when the battery charging is in error.  Lights green to indicate the battery is fully charged or no battery installed.
Introduction1 23  • Drive Access When LED in blue blinking light indicates that the system is accessing the Hard Disk or Optical Disk Drive. • Wireless LAN access When LED in blue light indicates that the wireless LAN module is activated. When LED lights off, it indicates that the function is disabled. • Caps Lock When LED in blue light indicates that the Caps Lock key on the keyboard is activated. When activated, all alphabet keys typed in will be in uppercase or capital letters. • Scroll Lock When LED in blue indicates that the Scroll Lock key on the keyboard is activated. The Scroll Lock key has different functions depending on the software you are using. • Num Lock When LED in blue light indicates that the Num Lock key on the keyboard is activated. When activated, the embedded numeric keypad will be enabled.
Notebook User Guide 24  THE FUNCTION OF EASY BUTTONS   1. CPU Throttling  2. Internet Button  3. Wireless LAN Button    • CPU Throttling Press this button to decrease the CPU performance speed in order to save power for extending battery life and operation time. • Internet Button This technology is designed specifically for providing a very convenient way in connecting Internet only by pressing Internet button as shown in the graphics. Just Press this button to open the Internet Explorer directly.   • Wireless LAN Button Push this button to activate or inactivate the Wireless LAN. When you activate the wireless LAN function, it will search the wireless LAN signal automatically if  you had installed the driver.
Introduction1 25  1.4  The Front Side of the Notebook    1. Microphone Jack      2. Headphone Jack 3. Cover Switch      4. 4-in-1 card slot  • Microphone Jack Allows you to connect an external microphone for monophonic sound recording directly into your notebook computer.  • Headphone Jack (with SPDIF out) Lets you plug in a stereo headphone, powered speakers, or earphone set with 1/8 inch phono plug for personal listening. (The SPDIF transmits digitized audio signal by optical fiber. The external audio amplifier can get the best audio quality without loss.) • Cover Switch  The cover (LCD panel) is locked when it is closed. Slide the button right aside to release the latch for opening the cover of the computer.
Notebook User Guide 26  • 4 in 1 card slot The card slot supports SD, MMC, MS (Memory Stick) and MS_Pro flash memory card format. You can use either of  the 4 types flash memory cards for extra storage media. Please pay attention to correct direction when you insert the flash memory card. For more detail of flash card, you can refer to Chapter 3.9  1.5  The Rear Side of the Notebook The system ports at the back of your notebook computer can connect various devices. Each port is described as followings.   1. TV Port  2. VGA Port   3. DC Power Port  • TV Port Lets you connect to the S-Video TV connector for presentation or VCD, DVD watching.   • VGA Port Lets you attach an external monitor or projector for wider display. You can run the LCD display and the external monitor simultaneously or switch it to monitor only using the display hot-key.
Introduction1 27  • DC Power Port Lets you connect the AC power adapter in supplying continuous power to your notebook and recharging the battery. 1.6  The Left Side of the Notebook The left side of your notebook computer provides the features shown in the following figure.   1. Locking Device Keyhole  2. Modem Port 3. Optical Disk Drive    • Locking Device Keyhole  Lets you attach a Kensington security system or a compatible lock to physically secure your notebook computer. • Modem Port A 56K internal fax/data modem is installed. It keeps you connected to the outside world through phone line.   For electrical safety concerns, only use telephone cables rated 26AWG or higher.
Notebook User Guide 28  When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm.  There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual.  Do not dispose of batteries in a fire.  They may explode.  Check with local codes for possible special disposal instructions. • Optical Disk Drive Allows you to load and start programs from a compact disc (CD) or a digital video disc (DVD) and play conventional audio CDs. It also can make CD/DVD by using CD-R/RW or DVD-R/RW. 1.7  The Right Side of the Notebook   The right side of the notebook computer offers the features shown in the following figure.
Introduction1 29   1. ExpressCard Slot  2. USB 2.0 Ports   3. LAN Port   4. Air-Outlet Vent   5. IEEE 1394  6.  USB 2.0 Ports  Right Side Features • ExpressCard Slot A newly developed PC Card interface, its connector has 26 pins and has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction). • USB 2.0 Ports  The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your notebook computer. • LAN Port An internal 10Base-T/100Base-TX Ethernet LAN module connects your computer to other computers/networks through a local area network (LAN). • Air-Outlet Vent Emits the heat out of your computer and keeps it within operating temperature.
Notebook User Guide 30  • IEEE 1394  IEEE 1394 port is a high speed I/O port that can transfer high levels of data in real-time, such as external hard disk, Digital Video Camera.  • USB 2.0 Ports  The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your notebook computer. 1.8  The Underside of the Notebook The bottom of the notebook computer offers the following features.  1. Hard Disk Compartment  2. Battery Lock Latch 3. Battery Bay  4. Memory Compartment 5. Wireless LAN Compartment  6. Battery Release Latch   Bottom of the System • Hard Disk Compartment Open this cover of this compartment to replace with other Hard Disk Drive. Please refer to Chapter 7 for how to replace it.
Introduction1 31  • Battery Lock Latch Push the latch to the lock side to lock and secure the battery, or push the latch to the unlock side for unpacking the battery pack. • Battery Bay Equipped with a choice of Lithium-Ion (Li-Ion) battery pack.  • Memory Compartment There are two SO-DIMM memory slots. One memory slot is empty for upgrade usage. • Wireless LAN Compartment This compartment is for installing Wireless LAN module to enable the Wireless LAN function. We strongly suggest that Wireless LAN module should be installed only by certified dealer. • Battery Release Latch To release the battery, first locate the Battery Lock Latch at the left side with unlock status, then push the Battery Release Latch to the right end to remove the battery pack.
Notebook User Guide 32  1.9 Notebook Accessories AC Adapter The AC Adapter supplies external power to your notebook computer and charges the internal battery pack simultaneously. The AC adapter has an auto-switching design that can connect to any 100VAC ~ 240VAC power outlets. You just change the power cord if you are going to use your notebook in other countries with different connector outlets. When you connect the AC adapter, it charges the battery whether or not the notebook computer is powered on. Battery Pack  Aside from the AC adapter, your computer can also be powered through the internal battery pack. The battery pack uses rechargeable Lithium-Ion (Li-Ion) battery cells that provide long computing hours when fully charged and power management enabled. You should always leave the battery inside your computer even when using the AC adapter as it also acts as a back-up power supply in case power from the AC adapter is cut off. It is also very important to have the battery pack always charged to prevent battery cell degradation.
Introduction1 33  1.10 Notebook Options DVD/CD-RW Combo Device Pack This device pack can write data to CD-R or CD-RW CD for you to backup the data and also can read DVD/CD title. DVD dual (Dual Rewritable DVD combo) Device Pack This device pack combines following two standard packs. Using the suitable media, you can make any format of CD or DVD as you want. DVD-RW combo:  This device pack can write data to CD-R or CD-RW and DVD-R or DVD-RW media and also can read DVD/CD title. This media is commonly used on DVD video player. DVD+RW combo:  This device pack can write data to CD-R or CD-RW and DVD+R or DVD+RW media for you to backup the data and also can read DVD/CD title. This media is commonly used on newer DVD video player.
Getting Started 2 35  2 Getting Started   Your Notebook is designed and pre-configured for easy setup and use. This chapter describes the installation steps you should follow to get the notebook up and running as quickly as possible. Contact your dealer if they have pre-installed all the needed drivers to fully operate your computer or if there is an update on the driver installation of the notebook.
Notebook User Guide 36  2.1  Using the Battery Pack The notebook is designed to operate with one of the following power sources: • With AC power using the AC adapter connected to an electrical outlet. • With a Lithium-Ion (Li-Ion) battery pack. You should use the AC adapter whenever it is possible, relying on the battery pack only when AC power is unavailable. Before you use your notebook computer, install and recharge the battery pack first. The rechargeable Li-Ion battery pack allows you to operate the notebook without an external power source. When you connect the AC power adapter, the battery immediately starts to recharge. Normal battery charging time is 2 hours for Lithium-Ion (Li-Ion) battery pack when your computer is turned off. For maximum battery performance, fully discharge the battery first before recharging it when you start to use it first time. To do so, unplug the AC adapter, turn off power management features (through Setup and Windows), and turn on the system. Once the battery is fully discharged, plug in the AC adapter and recharge the battery. You can also do it by using the Battery Refresh function in BIOS setup menu that is described on chapter 6.6 If you do not discharge the battery completely, it fails to accept a full recharge.  Li-Ion battery is vulnerable, do not charge it with other power adapter, or it may cause fire or explosion.
Getting Started 2 37  Installing the Battery Pack This notebook provides the most convenient way to install the battery pack into your computer. With the extended nose directed toward the compartment, insert and push the battery pack.  Removing the Battery Pack To remove the battery pack, slide the lock latch to the end of left side to unlock the battery lock latch (1), and slide the battery release latch to the end of right side to release the battery latch (2), then take out the battery pack with your finger (3).  Replacing the Battery Pack When your notebook estimates that the battery only has enough charge to continue for a few minutes, it will alert you with a battery low warning beep. If
Notebook User Guide 38  you are consuming a lot of power by using the audio system, the PCMCIA slots, the hard disk drives, and optical disk drive, your notebook might run out of charge much sooner than you expect. You should always respond to the battery low indication by connecting to AC power or turning off your notebook, or suspending your notebook to disk. If you do not do so, the notebook will automatically suspend to disk and turn off. The contents of the memory will store in the hard disk drive. You will be unable to restart the notebook until you have connected to the AC adapter or installed a charged battery. To replace the battery pack, refer to the previous sections on "Installing the Battery Pack" and "Removing the Battery Pack."  For Window XP, the suspend mode (Hibernate or Standby) can be chosen at Power Options of Windows's Control Panel)  Be sure to save your data before replacing the battery pack or connecting the AC adapter. Failure to do so can result in data loss. EXTENDING BATTERY LIFE It is important to be aware of the simple things for extending the life of the system main battery while you are on the road. You should find a working place where the external lighting is not too bright and turn down the screen brightness. Also, you can choose the available mode on the Power Management item of the Control Panel in Windows.  2.2  Connecting the AC Power Source The AC adapter provides external power source to your computer and charges the internal battery pack at the same time. The AC adapter also has an auto-switching design that can connect to any 100VAC ~ 240VAC power outlets.
Getting Started 2 39  To connect the power adapter: 1. Plug the AC power cord into the power socket of the AC power adapter. 2. Plug the other end of the AC power cord to a live AC wall outlet.    3. Plug the connector of the AC adapter to the DC-IN port found at the rear side of the computer.  Whenever possible, it is advisable to always have the AC adapter connected to the notebook and the battery pack installed. This ensures continuous power supply and prevents any data loss incurring from sudden power breakdown.  y  For the power supply of this equipment, an approved power cord has to  be used. y  Make sure the socket and any extension cord(s) you use can support   the total current load of all the connected devices. y  Before cleaning the computer, make sure it is disconnected from any   external power supplies (i.e. AC adapter).
Notebook User Guide 40  2.3  Starting Your Computer The Power/Resume button is found on the top of the base unit. Press the Power/Resume button to start your computer and check that if the Power LED turns on.  After a few seconds, the computer’s display will turn on and your computer will begin to execute the Power On Self Test or POST to check if all system components are running properly. Any error found during the test will be displayed on the screen and may generate short beep sound as well. After the test, the screen will also display a message "press <F2> to enter SETUP". You don’t need to run this program at the moment as your dealer already made the necessary settings for your computer optimal operation. Refer to Chapter 6 on running the SETUP program later. After the test has completed, your computer will start to search and boot up the operating system from your hard drive. The notebook computer normally comes with a Windows operating system pre-installed in your hard drive.
Getting Started 2 41  Consult the Windows manual on how to use the program. If not, contact your dealer for assistance. 2.4  Adjusting the Display Controls The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> + <F9> keys respectively. You need to press these hot-key controls after powering on your notebook to suit your viewing pleasure.  The Brightness hot-key control adjusts the brightness on the LCD. The brightness hot-key control will not set the LCD completely dark or bright; it provides sufficient lighting to the LCD to match the external lighting of the surrounding. The brighter the room, the more you need to increase the brightness of the LCD. 2.5  Installing the Notebook Device Drivers   If you already have an operating system installed into your notebook computer, it is best to install the needed device drivers for using the built-in devices of your computer. Before installing the drivers, check with your dealer first if they have already installed all the drivers along with the operating system. If not, follow the procedures below: INSTALLING WINDOWS XP FROM OPTICAL DISK DRIVE To install Windows XP directly from your optical disk drive, please go to Boot menu of BIOS setup menu. Use arrow key to select "CD-ROM Drive", then use "+" or "-" to move it to the top. Go to Exit menu and select "Exit Saving Changes". Accordingly, insert the Windows XP installation CD into
Notebook User Guide 42  optical disk drive with following the instructions on the screen to finish the installation.  DRIVER INSTALLATION NOTE:  Please be notified that whenever you install the driver utility, it should be install the CHIPSET Driver first. INSTALLING THE CHIPSET (SMBUS) DRIVER Your notebook computer uses the advanced chipset. Installing the driver to enhance the stability and performance.  Installing Chipset device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears.  2. Click the Browse button and specify the directory as  "E:\Drivers\WinXP\SMBUS\Setup.exe". 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click "Next" continuously to install this driver when screen displays this command. 5. Click "Yes" to accept the License Agreement. 6. Tick the option "Yes, I want to restart my computer now.", and press Finish to restart your system. INSTALLING POWERNOW  (AMD TURION/SEMPRON) DRIVER Your notebook computer uses the advanced chipset. Installing the driver to enhance the stability and performance.
Getting Started 2 43  Installing PowerNow driver for Windows XP 1.    Click the Start button, then point to Run. The Run dialog box appears.  2.    Click the Browse button and specify the directory as  "E:\Drivers\WinXP\PowerNow\Setup.exe". 3.    Click "Next" to execute the setup program. The Setup box appears. 4.    Click "Yes" when License Agreement box appears. 5.    Click "Next" continuously to install this driver when screen displays this command. 6.  Tick the option "Yes, I want to restart my computer now.", and press Finish to restart your system. INSTALLING THE VGA & CPANEL DEVICE DRIVER Following is the procedure for installing the Video Accelerator 3D Adapter VGA driver to your computer: Installing VGA device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears.  2. Click the Browse button and specify the directory as.  "E:\Drivers\WinXP\VGA&CPanel\Setup.exe". 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click Next to install this driver when screen displays this command. 5. Click “Yes” to accept the License Agreement. 6. Click “Express” to install VGA driver (recommended) or “Custom” for advanced users and system administrators. 7. Tick the option "Yes, I want to restart my computer now.",  and press
Notebook User Guide 44  Finish to restart your system.  Please be notified that whenever you install the Azalia audio and Azalia modem driver , it should be install the Azalia Hotfix Driver first .  INSTALLING THE AZALIA HOTFIX DRIVER  Your notebook computer uses the Azalia audio and Azalia modem.   Installing Azalia Hotfix driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears.  2. Click the Browse button and specify the directory as.  "E:\Drivers\WinXP\Audio\MSHDQFE\win2k_xp\us\kb888111.exe". 3. Click "OK" to execute the setup program. The Setup box appears 4. Tick the option "I agree" and press Next to install this driver. 5. Click “Finish” to complete it. INSTALLING THE AUDIO DEVICE DRIVER  Your notebook computer uses the Realtek Audio controller. Installing Audio device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears.  2. Click the Browse button and specify the directory as.  "E:\Drivers\WinXP\Audio\Setup.exe" where the audio driver is located. 3. Click "OK" to execute the setup program. The Setup box appears.
Getting Started 2 45  4. Click “Next” to continue the following steps. 5. Tick the option "Yes, I want to restart my computer now.",   and press “Finish” to restart your system. INSTALLING THE MODEM DEVICE DRIVER Please follow the procedures below for installing the Smart link System Azalia Modem driver: Installing Modem driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click Browse button and navigate to the directory as "E:\Drivers\WinXP\modem\ssetup.exe" 3. Click “OK” to implement the setup program to install this driver. 4. Click “OK” to complete it.   Please be notified that whenever you install the TouchPad  and Keyboard Controller driver , it should be install the Keyboard Controller Driver first .  INSTALLING ENE - KEYBOARD CONTROLLER DRIVER  Installing ENE- Keyboard Controller driver for Windows XP  1. Click the Start button, then point to Run. The Run dialog box appears.  2. Click the Browse button and specify the directory as.  "E:\Drivers\WinXP\KBC\Setup.exe". 3. Click "OK" to execute the setup program. The Setup box appears
Notebook User Guide 46  4. Click "Next" to execute the setup program.  5. Tick the option "Restart Windows now.",  and press Finish to restart your system. INSTALLING ALPS - TOUCH PAD DRIVER  Installing ALPS - Touch Pad driver for Windows XP        1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as.  "E:\Drivers\WinXP\Touch Pad\Setup.exe". 3. Click "OK" to execute the setup program. The Setup box appears 4. Click Next to install this driver when screen displays this command. 5. Tick the option "Yes, I want to restart my computer now.",  and press Finish to restart your system. INSTALLING THE WIRELESS LAN DEVICE DRIVER AND UTILITY INSTALLING THE WIRELESS LAN DRIVER Please follow the procedures below for installing the Gemtek Wireless LAN driver: Installing Wireless Lan driver for Windows XP  1. Click the Start button and then click Run. The Run dialog box appears. 2. Click Browse button and specify the directory as “E:\Drivers\Winxp\ Wireless Lan\ Setup.exe”
Getting Started 2 47  3. Click “OK” to continue installing the WLAN driver. 4.       Click “Next” continuously to install this driver when screen displays this command. 5 Click “Yes” to accept the License Agreement. 6. Click “Next” to continue the following step. 7. Click “Finish” to complete it.. INSTALLING THE LAN DEVICE DRIVER Please follow the procedures below for installing the LAN driver: Installing LAN driver for Windows XP  1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as.  "E:\Drivers\Winxp\LAN\Setup.exe"  3. Click  “Next” to continue the following steps.  4. Click “Finish” to implement the setup program to install this driver. INSTALLING CARDREADER DEVICE DRIVER Please follow the procedures below for installing the Cardreader driver: Installing Cardreader driver for Windows XP  1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as.  "E:\Drivers\Winxp\Card Reader\Setup.exe"
Notebook User Guide 48  3. Click  “Next” to implement  the setup program to install this driver. 4. Click “Finish” to complete it. INSTALLING SLIENT MODE UTILITY  Installing Slient Mode Utility for Windows XP 1 .   Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as.    "E:\Drivers\WinXP\Slient Mode\PM(32bit)_setup.exe". 3. Click "OK" to execute the setup program. The Welcome box appears. 4. Click “Next” then click Install to setup this driver when screen displays this command. 5. Tick the option "Finish" to complete. 2.6  Turning off Your Computer If you are not going to use the computer for a while, it is best to turn off the power of the computer for longer use. Before turning off the power, you need to close first all application programs and shutdown the operating system. After turning off the computer, make it a habit to leave the LVDS panel open for a while whenever used for an extended period of time. This allows the inside parts of the computer to cool off. Closing the panel will force the heat up against the LCD screen, which may degrade the LCD when done regularly. More importantly, never close the LVDS panel for a long period of time when computer is on and power saving features are disabled.
Using Your Notebook 3 49  3  Using Your Notebook   This chapter describes how to operate the standard built-in features of the notebook that you normally would use in your day-to-day computer work. If you are new to computers and to your operating system, you also need to read the manual for the operating system on how to work with your computer. It is very important to familiarize yourself well with the operating system. The succeeding chapters not only guide you to go beyond the basics, but also try other exciting features.
Notebook User Guide 50  3.1  Starting Your Operating System The operating system is a must ingredient in using your computer. Without an operating system, it is like playing chess without the chessboard. It is the platform for all your software application programs to run on. The most popular operating system today is Microsoft Windows. You should have installed one operating system by your dealer unless you are an expert computer user and would need a more powerful operating system. If you have an operating system already installed in your computer, then you would be up and running after you power on your computer and boot up the system. Check your operating system manual on how to run it.  3.2  Understanding the Keyboard Functions Your notebook computer is equipped with an 86/87/88 keys keyboard that provides all the functionality of a full-sized 101 or 102-key keyboard. Aside from the standard typewriter-layout keyboard of your computer, there are a number of extra features and function controls on the built-in keyboard including Windows system hot keys.
Using Your Notebook 3 51    1. Function Keys  2. Control Keys   3. Windows Start Menu Key  4. Control Keys 5. Windows Shortcut Key  6. Cursor Control Keys  Keyboard Key features and operations are described below: • Function Keys Function keys are application-driven, like F1 through F12 can be found on the keyboard. These keys work together with the Fn key to activate special functions. Some keys (printed in blue on keypad) are preprogrammed with dual functions. • Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction with other keys to change their functions. To use control keys, press and hold the control key while pressing another key. For example, "Press Ctrl-C" means to hold down the Ctrl key and type the letter C. Key combinations work especially to the application you are running.
Notebook User Guide 52  • Windows keys Use the following two keys to facilitate your work:   Start Menu key Displays the Start menu.  Shortcut/Application key Provides quick access to shortcut menus. This key acts like a right mouse button. • Cursor Control keys Cursor control keys let you position the cursor on the screen where you want. In the screen, the cursor is a blinking underline, block, or vertical bar depending on the application. The cursor indicates where the next text typed is inserted. • Typewriter keys Typewriter keys (also called alphanumeric keys) are used to enter text and characters. Keys with blue print on them behave differently when combined with control keys.
Using Your Notebook 3 53  BASIC KEYBOARD FUNCTIONS  Keypad  Function Description  <Enter> key. Execute a command. Within many text editing application programs, the <Enter> key inserts a hard carriage return, just like what ordinary typewriter does.  <Esc> key. Press this key to cancel or escape from a command or function.  <Ins> key. Known as the Insert key. Press this key to toggle the keyboard data entry from insert to type over mode.  <PrtScr> key. Known as the Print Screen key. Press this key to map the whole screen to share memory for your specific usage.  <Del> key. Known as the Delete key. Press this key to delete the character to the right of the cursor, or delete marked texts or items.  <Pause> key. Press this key to temporarily halt execution of a command. Pressing any other key to resume execution of a command.  <Backspace> key. Press this key to delete the character to the left of the cursor.  <Shift> key. Press this key in combination with alphabet letters to produce uppercase letters in typing. Use this key in combination with those two-character keys (found on the second row of the keyboard) to produce the upper marked keys. Also used in most application program in combination with other keys to execute a certain command.  <Tab> key. Press this key to move the cursor to the next tab stop on the right. This key works much the same as in ordinary typewriter.
Notebook User Guide 54  Keypad  Function Description  <Ctrl> key. Known as the Control key. Used in most application program in combination with other keys to execute a certain command.  <Alt> key. Known as the Alternate key. Used in most application program in combination with other keys to execute a certain command. +<Fn> + <Num Lock> key. Activates the embedded 15-key numeric keypad. The keys are color coded blue.  <Caps Lock> key. Used in most application program to always activate uppercase alphabet characters. +<Fn> + <Scroll Lock> key. Used in most application program to scroll the screen without having to move the cursor. CURSOR CONTROL KEYS  Keypad  Function Description  Up arrow key. Moves the cursor up one line at a time.  Down arrow key. Moves the cursor down one line at a time.  Left arrow key. Moves the cursor to the left one space at a time.  Right arrow key. Moves the cursor to the right one space at a time.
Using Your Notebook 3 55  SCREEN CONTROL KEYS  Keypad  Function Description  <Home> key. Moves the cursor to the beginning of a screen or line.  <PgUp> key. Moves the cursor up one screen at a time  <PgDn> key. Moves the cursor down one screen at a time  <End> key. Moves the cursor to the end of a screen or line. WINDOWS HOT KEYS  Keypad  Function Description  <Start> key. Pulls up the Windows Start menu.    <Right Click> key. Performs a mouse right-click function for Windows system.  SPECIAL FUNCTION KEYS The notebook has special system function keys that activate key serving dual functions. When pressed in conjunction with the <Fn> key, these keys set specific system parameters and are sometimes referred to as "hot keys".
Notebook User Guide 56   Keypad  Function Description + Switches display between LCD, CRT, or LCD and CRT simultaneously. + To shut down or resume the built-in system speaker volume.   + Increases the brightness of LCD display incrementally. +  Decreases the brightness of LCD display incrementally. + Decreases the audio volume of the notebook incrementally. + Increases the audio volume of the notebook incrementally. 3.3  Using the Glide Pad Pointing Device Your computer comes with a built-in Glide Pad pointing device that is found on the center of the palm-rest surface.  The Glide Pad offers a number of options that let you customize how it
Using Your Notebook 3 57  functions. To access these options, locate the Control Panel and double click on the Mouse icon. The options let you control the size and color of the cursor, cursor speed, the accepted double-click speed, and selection button orientation. The Glide Pad works a mouse pointing device replacement that is used under Windows-based operating system. You can use the standard Microsoft driver that is compatible with the Glide Pad device and is normally used under Windows-based operating system. However, if you want to utilize the added features of the Glide Pad, you may want to try installing its own device driver that comes with added utilities for enhancing the function of the device.  1. Left Selection Button  2. Right Selection Button    3. Glide Pad     Glide Pad Features Here how to use the Glide Pad pointing device:
Notebook User Guide 58  1. The rectangular surface acts like a miniature duplicate of your display screen. To move the mouse cursor, place the finger lightly on the sensor pad and move in the desired direction. If you reach the end of the pad, lift your finger and place it back down on the other side of the pad. 2. To select an item, click on the item by pressing the left button control or by simply tapping on the surface once. A light, quick tap always works best. To execute an item, click the left button twice or do a quick double tap on the surface. 3. To simulate holding the mouse button down (dragging an icon or selection), use the tap-and-drag gesture. This feels much like a double-click, except that the finger remains on the pad after the second tap: Tap, lift, tap, hold and move. The simulated button remains held as long as the finger remains on the pad. 4. When you press both the Left and Right click button at the same time, the auto Scroll function will be activated.  Avoid spilling any liquid on the Glide pad surface and always keep the Glide pad surface and pointing finger dry from sweat built-up. Also do not expose Glide pad to any magnetic source object. 3.4  Configuring Your Screen Display The VGA display function of your notebook is based on a high performance AGP local bus controller and is fully VGA compatible. This controller offers a large set of extended functions and higher resolutions especially useful when you are connecting an external high-resolution and high-frequency CRT or LCD.
Using Your Notebook 3 59  Please Refer to Section 5 "Installing the Notebook Device Drivers" of Chapter 2 in this manual for the procedures on how to install the VGA device driver under Windows. After installing the VGA driver, you would then configure the display resolution or screen size to match your LCD display panel. This notebook computer model provides Wide screen 15.4” 1280x800 (Wide XGA) resolution panels. You would also probably want to set the amount of color output to display sharper images and photos. POSSIBLE DISPLAY CONFIGURATIONS The table below shows you the possible display resolution you can set when using either the LCD display or the external monitor (CRT):  Display  Possible Resolution  Maximum Colors Widescreen 15.4” 1280x800 WXGA LCD 15.4” 1680x1050 WSXGA LCD 800x600 1024x768 1280x768 1280x800 1680x1050 16 million colors    16 million colors  16 million colors 16 million colors 16 million colors CRT Only  800x600 1024x768 1152 x 768 1280x1024 16 million colors 16 million colors 16 million colors 16 million colors  65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or 16M colors is equivalent to 32-bit true color.  You can use the <Fn> + <F3> hot-key to switch the display between LCD only, CRT only, or both LCD and CRT display.
Notebook User Guide 60  CHANGING THE DISPLAY PROPERTIES UNDER WINDOWS To change the display properties of your screen under Windows system, just right-click on the desktop area and select Properties or go to the Control Panel and click on the Display icon. The Display Properties dialog box will appear on your screen. Click on the Settings tab to set your desired configuration. Make sure to follow the configuration table above.  If you cannot configure the display properties, change the display driver first as mentioned on Section 5 "Installing the Notebook Device Drivers" of Chapter 2 in this manual. Consult your dealer for the latest Windows VGA driver. 3.5  Knowing the Power Saving Features One of the great features in your notebook computer aside from its superior performance is the ability to save energy power. Your computer is designed to incorporate intelligent and advanced power management functions that turn off power of most components when system is idle or not in use. This feature not only gives you longer battery hours but cooler systems and components as well. For more information on how to control the power management features of your computer, refer to Power Options function in Control Panel of Windows. The definitions of Standby Mode, Hibernation Mode, and Shutdown are depicted as follows: Standby Mode Standby Mode is mainly for power saving. When the Standby Mode is activated, your display and hard drive are shut down and all open applications
Using Your Notebook 3 61  and documents are stored in RAM (Random Access Memory). This allows your notebook to wake up quickly, but a low level of power is required to maintain this suspended state. How quickly your system powers down into Standby mode is up to you by setting proper times in Power Options of Control Panel in Window. While the notebook is in Standby mode, the LED of power indicator flashes. To resume your working again, you can press the power button to return your work to the screen where you left off. Hibernation Mode In Hibernation mode, all system devices are powered down and the contents of RAM are stored on your hard drive. Hibernate mode uses less power than Standby mode, but takes a bit longer time to resume. When your notebook goes into hibernation, Windows saves your entire desktop state before powering down your computer. You don’t need to save and close each document before you put your notebook into hibernation. When you press power button again, system will bring your notebook out of hibernation. You'll find your applications and documents open on your desktop exactly as you left them.    Hibernation is enabled by default. To verify that Hibernation is enabledd, Click Start, point to Settings, and then click Control Panel. Choose Power Options icon, then click on the Hibernate tab. IF the chock box of Enable Hibernate is selected, the Hibernation mode is enabled. Shutdown   All power has been turned off from the notebook. This means that no power including external AC power source and battery power source will be consume by the notebook.
Notebook User Guide 62  3.6  Working with the Built-in HDD Your notebook computer is equipped with a built-in large capacity 2.5 inch IDE hard disk drive where you store or install your computer operating system and all application software programs. You need to format the hard disk before using. The internal hard disk is normally assigned as Drive C after formatting. Sometimes divided into two partitions, adding a Drive D. Since your computer supports different hard disk capacities (up to 80 GB), you also need to setup the disk type first on your computer’s BIOS SETUP program before formatting the disk drive. Your computer supports Auto-detect hard disk type, so you do not need to set it manually. Your dealer should already have done all of this for you. You can refer to Chapter 6 on how to run the BIOS SETUP program.  You can increase the system’s storage capacity by replacing the standard hard disk drive with a drive of greater storage capacity.  If you wish to replace your hard disk, contact your local dealer for more information about this dealer-installable device.  Always turn off your computer first before removing the hard disk drive. Failure to do so will damage the computer and the hard disk. Avoid jarring or moving the computer while the hard disk is still being accessed. 3.7  How to Access the Optical Drive Your system ships with an optical disk drive installed on the left side of your computer. You would normally use the drive for installing operating system and software application programs.  To insert and remove a disc on the drive:
Using Your Notebook 3 63  1. Make sure the computer is turned on. Press the eject button found on the door cover of the combo drive. The CD tray mechanism will pop-out slightly and slowly pull out the whole length of the tray. 2. Place the disc on top of the CD tray with the label side facing up. Gently press the compact disc onto the center spindle to secure the disc.  3. To remove the disc, press on the center spindle and pull up the disc from the side until the disc snaps out of the spindle lock.  If the eject function is disabled by software or a power failure occurs, the Emergency Eject Hole allows you to manually remove a CD from the reader. 4. To close the combo drive, simply push the CD tray inside. The combo drive LED will activate when the disc is detected. Wait until the LED has turned off and then start to read the disc.
Notebook User Guide 64  How to care the CD When you handle CDs, pay attention to the following guidelines: • Always pick up the CD by its edges. • Avoid scratching or soiling either side of the CD. • Do not write with the hard ball-point pen or apply labels on either side of the CD. • Keep the CD away from direct sunlight or high temperatures. • Clean fingerprints or dust from the CD by wiping it with a soft cloth. The above points also apply to other optical storage media.  The Combo drive is a Class 1 Laser Product. 3.8 ExpressCard  WHAT IS EXPRESSCARD ? The ExpressCard is a newly developed PC Card interface, its connector has just 26 pins and the interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane PCI Express link. Its form factor is up to 40 percent smaller than a PC Card, which allows ExpressCard modules to be included in smaller host systems. Designed for both desktop and mobile use, ExpressCard use either USB 2.0 or a single lane PCI Express technology.  The ExpressCard standard was developed by PCMCIA member companies including technology leaders, system manufacturers, card manufacturers, from all other parts of the PC Card industry.
Using Your Notebook 3 65   Dimensions of ExpressCard Current CardBus PC cards are 54 millimeters wide. ExpressCard can divided into two categories, based on width. Most designs will use the ExpressCard 34 design, which sets the width at 34 millimeters. For some applications, the wider ExpressCard 54 standard will be used to produce cards that can handle the higher thermal requirements of those applications.  All ExpressCard modules are 5mm thick but the standard also allows for card developers to build longer 'extended' modules.  Native Bus Connection The ExpressCard standard supports both the USB 2.0 and PCI Express interfaces. Card manufacturers are able to choose whichever bus is appropriate to their application; the performance of PCI Express, or from the wide range of solutions supported by USB. All host PC ExpressCard slots will support cards using either interface. The host platform no longer needs to incorporate
Notebook User Guide 66  a bridge chip between the chipset and the socket. PCI Express and USB 2.0 are fully hot-pluggable.    To support the broadest range of applications there are two sizes of module. Both are smaller that today's CardBus card. The smallest card, the ExpressCard/34 module, is almost half the size of a CardBus card. This size is suited to a very broad range of applications covering communications, media, and general purpose.    PC Card  (CardBus,  Type II) ExpressCard/54 ExpressCard/34 Data Transfer rate  132 Mbps  500Mbps (or 250Mbps in each direction) Connector pins  68  26 Port Type  Parallel  Serial Dimensions (HxWxD) 54mmx86mmx5mm 54mmx75mmx5mm 34mmx75mmx5mm  A big part of "just working" will be the existing software support. Both Windows XP and Windows 2000 already support the ExpressCard specification, although Windows 98 and Windows Millennium Edition do not.  INSERTING AND REMOVING A EXPRESSCARD  Your computer includes hot swapping capability, that allows you to exchange cards while the computer is turn on and start using it immediately. Inserting ExpressCard To insert a ExpressCard into the ExpressCard slot: 1. Locate the ExpressCard slot cover on the right side of the computer.
Using Your Notebook 3 67  2. Insert the side of ExpressCard with the 26-pin socket into the ExpressCard slot. The face label of the card should also be facing up. 3. When the full length of the card is almost inside the slot, push firmly but slowly, to ensure full connection with the computer. The ExpressCard will be automatically detected, and once the needed driver is installed, it will generate a beep sound to indicate that the card is detected.  Removing ExpressCard To remove a ExpressCard from the ExpressCard slot, you should first disable the ExpressCard card setting in the system as described followings: 1. Double click the ExpressCard icon on the right bottom side of the task bar. 2. Select the socket from the list that you want to remove, and click Stop button. The system then disables the function of ExpressCard card.
Notebook User Guide 68  3. Then you can remove the inserted ExpressCard. To release the ExpressCard, just push the ExpressCard again to the end. Then the ExpressCard will automatically bounce off the ExpressCard slot. 4. When the ExpressCard has moved out a space out of the slot, hold the edges of the card and slowly slide it out.   The power consumption of ExpressCard/54 is about 2.1W, while the consumption of ExpressCard/34 is about 1.3W. To save energy, press the button to disconnect the card when it is not in use.
Using Your Notebook 3 69  3.9  Using Flash Memory Cards WHAT IS FLASH MEMORY CARD?   Flash Memory is a memory storage media. It is used by most digital camera, moreover, it can replace the traditional floppy disk. Flash memory card is built with different form factor and brand name. Their size is smaller than PCMCIA card. This computer supports most of the flash memory card, including SD, MMC, MS (Memory Stick), and MS_Pro card. The 4 in 1 card slot is used by the following cards as SD, MS (Memory Stick ), MMC, and MS_Pro.   For a single moment, only one card can be inserted into the 4 in 1 card or CF slot  Inserting Flash Memory Card To insert a flash memory card into the slot is similar to ExpressCard. You only need to pay more attention whenever insert the flash memory card into the slot with the correct side. For MMC and SD card, you should position the copper connector at the bottom side. For Memory Stick card, you should position the copper connector at the topside. All of these cards should be located at the center of  the slots in inserting.  Slot  Card type  Copper connector 4 in 1  SD (Secure Digital) MMC (MultiMedia Card) MS (Memory Stick)   MS_Pro Bottom side Bottom Top side Top side
Notebook User Guide 70  Only one correct side can be accepted for the 4 in 1 card slots. If you cannot insert the card into the 4 in 1 slot or you had inserted the card but it is not recognized by the computer, please remove the card and turn the card upside down and insert it again. To prevent the damage made both on card and the slot, never forced an entry into the slot with incorrect side.   Removing Flash Memory Card It is similar to ExpressCard for removing a flash memory card from the slot. You should first disable the card setting in the system as described in the former section.  To remove the flash memory card, you should only pull out the card by finger, there is no release button for flash memory slot.
Using Your Notebook 3 71
Fun with Multimedia 4 73  4  Fun with Multimedia   This chapter lets you make full use of all the multimedia features of your computer in having fun and excitement during work or leisure. You will learn how to mix and match the built-in sound system, use Combo drive in creating an exciting full multimedia presentation.
Notebook User Guide 74  4.1  Notebook Multimedia Features Your notebook computer is rich in multimedia features that make your computing fun, comfortable, exciting and easy. Your computer is well able to perform all multimedia tasks through the following: • AMD TurionTM 64 mobile technology  • Up to 2GB DDR- SDRAM      • DVD/CD-RW Combo or DVD Dual (Optional)     • Integrated ATI RS482M graphics engine. • Sound Blaster compatible. Compliant with Intel HD Audio (Azalia).   4.2  Audio Sound System Features Your computer has a built-in 16-bit stereo sound controller that allows you to record, store, and playback voice, music and other sound effects with built-in mixer controls. An integrated full-duplex microphone and twin mini-speakers are also built-in into your computer to allow you to record and playback sound anytime and anywhere.  On the left side of your computer, you will find the audio ports that include the following: • External 1/8-inch microphone jack that connects external microphone for recording purpose.  • Earphone or headphone jack for personal listening. • SPDIF out port for digitized audio signal transmission.
Fun with Multimedia 4 75  • Sound volume adjust by K/B hot-key   4.3  Setting up the Audio Driver Properties Before you can start using the audio capabilities of your computer, you need first to setup properly the audio driver after installing Windows. If you bought your computer with Windows pre-installed, it is most likely that your dealer have configured the sound driver for you. If not, you must refer to Chapter 2 on how to setup the sound drivers for Windows. 4.4  Windows Multimedia Programs Windows provides several multimedia programs that you can run with the built-in features of your computer. Pointing the Start button, Programs, Accessories, then Entertainment, you will find the Multimedia programs group. (The section below use Window XP as examples)
Notebook User Guide 76   Figure 4-1  Entertainment Programs Group The standard multimedia components are as follows: • Windows Media Player - for playing sound, video and animation files • Sound Recorder - for recording sounds and playback • Volume Control - for adjusting the volume of mixer  For more information on how to operate these multimedia components, run the program and click on the Help menu. 4.5  Recording Sounds  Your computer allows you to record voice and other sounds in several ways and stores them as files on your hard disk. These voice or sound files can then
Fun with Multimedia 4 77  be played back through the internal speaker or earphone jack using an external speaker, headphone, or earphone set. You can also use the files as voice annotations on many applications for more real presentation. This section will describe briefly how you can record sounds under Windows operating system.  To record sounds, you need to run the Sound Recorder program from the Multimedia program groups. The control buttons of the Sound Recorder are simple to understand which comprise of the Fast Rewind, Fast Forward, Play, Stop, and Record buttons. Click the Help menu on how to operate the Sound Recorder.   Figure 4-2  Sound Recorder The Sound Recorder also allows you to record sound from different input audio source like the following:  • From the external microphone • From the Combo drive Since you could record sound from different input sources, you must first set the proper audio input recording device under the Recording Control panel. To do this: 1. Double-click on the Volume Control on the taskbar or click Start button, then point to Programs, Accessories, Entertainment and then click on Volume Control.
Notebook User Guide 78  2. Click Properties in the Options main menu. 3. Click the round button for Recording and tick off each component that list in the "Shows the following Volume Controls" box.   Figure 4-3  Audio Properties 4. Click OK and the Recording Control dialog box will appear. Here, you will select the input device for the recording source. If you want to record from the Combo drive with audio music, you must click on CD Player.
Fun with Multimedia 4 79   Figure 4-4 Recording Volume Control USING AN EXTERNAL MICROPHONE Your computer allows you to connect an external microphone for high quality recording. The external microphone jack is found on the left side of your computer. Use only microphone with 1/8-inch mini-jack connector. Follow the same procedure for recording voice.  USING THE BUILT-IN COMBO DRIVE You would normally use the Combo drive for recording audio music from the Audio CD. Follow these steps: 1. Activate CD Player volume on the Recording Control as discussed earlier. 2. Run the Sound Recorder program.  3. Insert the audio CD into the Combo drive. Unless you have disabled the CD auto-insertion notification for supporting Suspend mode, the CD Player should automatically run after you have inserted an audio compact disc and will start playing the audio CD.
Notebook User Guide 80   Figure 4-5 Play Audio CD by Windows Media Player 4. Select the starting point where you want to start recording. 5. Switch to the Sound Recorder and press the Record button.  6. Switch immediately to the Windows Media Player and press the Play button. You can adjust the volume control so you can also hear the music while in recording. 4.6  Playing Audio and Sound  Your computer has built-in twin speakers to playback audio and sound. You can also adjust the volume manually by adjusting the volume control hotkeys found on the keyboard.
Fun with Multimedia 4 81  For more quality sound output, you can choose to connect an external amplified speaker or earphone from headphone jack. Always minimize the volume first before placing the phone set to your ear. USING THE WINDOWS MEDIA PLAYER The easiest way to playback multimedia media files is to run the Windows Media Player. Follow these steps: 1. Click on Start, point to Programs, Accessories, and then Entertainment. 2. Click on Windows Media Player to start program. 3. Click on the File menu and select the file you want to play. 4. When the file is recognized and open, click on the Play button to start playback. 4.7  Playing Video and MPEG Files Your computer is capable of running video motion files as well as MPEG (Motion Picture Expert Group) files on CD, DVD, or CD-RW. By using software MPEG program, you can watch real full-motion picture on your computer. You can also run the Windows Media Player under the Entertainment programs group as well to show all media device programs.
Notebook User Guide 82   Figure 4-6 Windows Media Player 4.8 Using DVD DVD is the breakthrough in superb full-motion picture playback. One disc can contain at least 4.7GB of information, capable of holding one full-length movie with soundtracks, subtitles, and different languages. Much more, the DVD-ROM drive of your computer is backward compatible with CD-ROM drive so it allows you to use any CD as well. It also works the same as the CD-ROM. To playback DVD titles, you would need a software MPEG-2 program and the DVD-ROM drive at least. Your Notebook computer has installed Windows XP for operation system and its Windows Media Player supports DVD’s playback..
Fun with Multimedia 4 83  You can use Windows Media Player to watch DVDs on your Notebook computer. Like a conventional DVD player, by using the Player, you can skip to specific titles and chapters, play sequences in slow motion, gain access to special features, and switch audio and caption languages. In addition to these conventional DVD player tasks, you can also retrieve information about each disc from the Internet.  Figure 4-7 To play a DVD On the Play menu, point to DVD, VCD or CD Audio, and then click the drive that contains the DVD. In the Playlist pane, click a DVD title, or chapter name, if appropriate.  To eject a disc, on the Play menu, click Eject. To play a selected title in a DVD repeatedly, on the Play menu, click Repeat. A check mark appears next to the command to indicate it is turned on.
Notebook User Guide 84  4.9  Using Rewritable Optical Disk Drive DVD/CD-RW Combo or DVD+RW combo drive is a device that can write digital data to CD-R and CD-RW or DVD+R and DVD+RW media. With this device, you can backup your own data to CD-R or CD-RW disc for mass data storage and safely retaining. The CD-R disc can be written several times until the CD-R is full; the CD-RW disc, furthermore, can write and erase data repeatedly. Please refer to the related user manual about the CD-RW software.  Please pay attention to the copyright of the software or data you want to backup. Backup or distribute the software or data might be illegal according the restriction of the law.
Connecting to Peripherals 5 85  5  Connecting to Peripherals   This chapter describes how you attach peripheral devices to your notebook. You can attach a printer or mouse; connect an external monitor and keyboard, or any other peripheral device. You will learn how to use these peripheral devices with the step-by-step instructions depicted in this chapter.
Notebook User Guide 86   5.1  Using the USB Port USB (Universal Serial Bus) is a hardware interface that enables you to connect multiple devices (such as printers, mice, keyboards, storage devices, joysticks, digital cameras, and video conference cameras, etc.) to your notebook computer, and up to 127 devices can be attached.  Besides, USB’s hot swap capability allows everything to be plugged in and unplugged without turning the system off.   Microsoft, HP, Compaq, Intel, Agere, NEC and Philip are seven core members of USB-IF to have worked on USB 2.0 standardization. USB 2.0 offers data transfer rate up to 480Mbps (megabits per second) compared to USB 1.1 devices, which transfer at speeds of 12Mbps. So, you could know that USB 2.0 can transfer data between the computer and its peripherals 40 times faster than USB 1.1. However, USB 2.0 is fully backward compatible, you will be able to use a USB 1.1 device in a USB 2.0 compliant system.   Depending on your operational requirements, you may need to disable other ports in order to release system resource for the USB port.
Connecting to Peripherals 5 87   The USB bus distributes 0.5 amps (500 milliamps) of power through each port. For the purpose of power saving, please disconnect your USB device while not in use.  5.2  Using an External Monitor Port Your computer has a 15-pin Monitor port for supporting any external CRT or LCD color monitor. You need a display signal cable (usually provided with the monitor). One end of the cable must have a 15-pin connector for the system. To connect an external monitor: 1. Turn off your computer and make sure the monitor power switch is turned off.  The notebook computer must be powered off or suspended while the monitor is being connected. Although you can connect the external Monitor without power off the computer and the external monitor, however, it is harmful to both devices and it shortens the life of these devices. 2. Connect the connector cable of the monitor to the VGA port at the back of your computer. Secure the cable connection with the screws provided. 3. Connect the monitor power cable and plug it into a properly grounded wall outlet. 4. Turn on the power of the monitor. 5. Turn on your computer. Both the LCD panel and the monitor screen will show the display. Your computer is set at default to run at simultaneous display mode.
Notebook User Guide 88  6. If you only want to show the display on the external monitor or projector and shut off the LCD display, you can use the <Fn> + <F3> hot-key to switch display type between LCD and external monitor. Keep pressing the hot-key until you get the display to external monitor only.   Refer to Chapter 3 regarding the possible External CRT resolutions and how to change the display properties. 5.3  Using the IEEE 1394 Port IEEE 1394, also known as FireWire, is a high-bandwidth serial bus developed by Apple and Texas Instruments. IEEE 1394 supports 100, 200, and 400 Mbps (Megabit per second) transfer rates and is widely used for downing video from digital camcorders to the computer. In addition to its high speed, IEEE 1394 enables isochronous (real-time) data transfer. This makes it ideal for devices that transfer high-bandwidth of data in real-time, such as video devices. It supports both Plug-and-Play and hot plugging, and also allows for the connection of up to 63 devices.  With built-in IEEE 1394 port, this computer enables the peripheral devices in transmitting digital video data or data backup. The Windows system will automatically recognize it after installing a suitable driver for it. Please visit
Connecting to Peripherals 5 89  Microsoft's web site for more information about it. Moreover, you should install the driver of peripheral device to connect with the IEEE 1394 port, for details please refer to the manual that comes with your peripheral device.   Please make sure that the external IEEE 1394 HDD box you purchase on local electronic store should provide external power adapter. There are different types of IEEE1394 HDD box and hard disk from different manufactures, the power consumption has varied range. If the power of the external IEEE 1394 HDD is supplied from the USB of this notebook, it may not run properly. 5.4  Using the TV Port Also found at the right of your computer is one TV port (s-video).  To display your computer screen on the TV, please connect the TV port of this notebook to the Video Input of the TV set. You can press <Fn> + <F3> key continually to switch between TFT, external monitor, TFT + external monitor and TV only. Keep pressing the hot-key until you get the display to external TV only. Or you can setup the detail by operate the computer as follows.
Notebook User Guide 90  1. Turn off your computer and plug one end of the s-video jack cable to the end to the input video jack of your television set. 2. Turn on your computer and your television set. 3. Click the Start button, then point to Settings, and click Control Panel.  4. Double-click on the Display icon and point to Setting tab.  5. Click Advanced button and point to Displays tab. You can see the TV icon on the screen. 6. Please click the red button above the TV icon. Click OK, Windows now automatically detect the TV port and enable this function. 5.5  Using the External Audio System At the front side of your computer, you will find the built-in audio ports. You can connect Microphone jacks, earphone or powered speaker. To connect to a audio jack: 1. Locate the audio port (Microphone, Headphone) that you want to use to the target device.
Connecting to Peripherals 5 91  2. Plug the jack into the port on the front side of the system.  If you use external speakers and experience the sound distortion or feedback, please lower the volume. Some factors is caused by too close locating the microphone and speakers from each other, moving away the external audio option from the unit may also help. 5.6  Using the LAN Port This notebook comes with an internal 10Base-T/100Base-TX LAN module that connects your computer to other computers/networks through a local area network (LAN) and supports data transfer rates at 10Mbps and can be up to 100Mbps. The 10Base-T standard also called Twisted Pair Ethernet is connected with RJ-45 connectors. The 100Base-TX is based on the older Ethernet standard. Because it is 10 times faster than Ethernet, it is often referred to as Fast Ethernet. The built-in LAN module provides a standard RJ-45 connector.  To connect the twisted-pair cable to your LAN port: 1. Locate the twisted-pair cable in the accessories box in notebook shipping carton. Each end of the cable has a RJ-45 connector. 2. Connect one end of the cable into the network wall outlet or HUB. 3. Connect the other end of the cable into the computer RJ-45 LAN port.
Notebook User Guide 92   5.7  Using the Wireless LAN Wireless LAN is the major breakthrough in computer communication technology. It lets user connect to the LAN environment without using any wire to traditional RJ-45 jack. User can enjoy the wireless connection within the range of Access Point (AP) of LAN.  Access Point (AP) is the wireless transmission and receiving device, it generally connects to the server of a LAN environment or act as a LAN hub with wireless connection. Access point can be set in an office environment, airport, major railway station, etc. that depends on the construction of each country. In most case, you probably can use it at office, please consult with the network department of your company for more details.  This computer integrates built-in 802.11 b/g wireless LAN module. IEEE 802.11b standard supports 11 Mbps wireless connection speed. However, IEEE 802.11g supports 54Mbps wireless connection speed, and is backward compatible with the slower 802.11b. You can connect to the wireless LAN Access Point without insert extra wireless LAN card into the PCMCIA slot. Wireless LAN module is similar to LAN module. You need to install software driver before using it. Please refer to chapter 2.5 on how to install the driver.
Connecting to Peripherals 5 93  5.8  Using the Modem Port This notebook comes equipped with a 56K internal fax/data modem that allows you to communicate with others via fax, email, or to connect to an online service or bulletin board. The built-in fax/data modem provides on standard phone connector.  To connect the analog phone cable to your modem: 1. Locate the analog phone cable in the accessories box in notebook shipping carton. Each end of the cable has a RJ-11 connector. 2. Connect one end of the cable into a standard wall outlet. 3. Connect the other end of the cable into the computer modem port.   The speed of data transmission is dependent on the quality of telephone lines. Digitally terminated lines improve the speed of data transmission. Contact your service provider for more information.  The analog phone cable is an industry standard cable. Longer cables are available at your local electronics store.
Customizing Your Notebook 6 95  6  Customizing Your Notebook   Your computer uses the Phoenix BIOS Setup program that allows you to set several system configuration in changing the way your computer performs. This includes you r system time and date, disk drive configuration and password setup. This information is then stored in the CMOS RAM and will remain permanent unless you change it again. This chapter discusses on how you will activate the BIOS Setup program and change the system configuration to suit your desired operation. You must be careful to set the configuration properly in order for your computer to run smoothly. If you are not sure of any settings, contact your dealer.
Notebook User Guide 96  6.1  Running the BIOS Setup Program Your computer is likely to have been properly setup and configured by your dealer prior to delivery. However, you may find it necessary to use the computer’s BIOS (Basic Input-Output System) Setup program to change system configuration information, such as the current date and time, or your hard disk drive type. The Setup program can be accessed when you power on the system and pressing the <F2> function key. The settings that you specify within the Setup program are recorded in a special area memory called the CMOS RAM. This memory is backed up by a battery so that is will not be erased when you turn off or reset the system. Whenever you turn on the computer, the system will read the settings stored in the CMOS RAM and compare them to the equipment check conducted during the Power On Self Test (POST). If an error occurs, an error message will be displayed on the screen, and you will then be prompted to run the Setup Program. As the POST (Power-On Self Test) executes during the boot up process, the screen will display the following message: Press <F2> to Enter SETUP Press the <F2> key to run the BIOS Setup program. The BIOS Setup program is organized into five menus which you can select using the <-- and --> keys. To move from one option to another, you use the up and down arrow keys while using the <F5> and <F6>, or <+>and <-> keys to change the settings. On the right hand side of the screen are some brief help descriptions of each item you want to change. On the BIOS Setup program, you will find the following parts on the screen:
Customizing Your Notebook 6 97  • Item Specific Help The right side of the screen. This area describes each parameter and its available settings. • Menu Bar The top line of the screen. Each of the five selections displays its own screen. • Parameters The left side of the screen. This area lists the parameters and their current settings. • Key Status Bar The bottom part of the screen. These lines display the keys available to move the cursor, select a particular function and so forth. To exit the BIOS Setup program, simply press the <Esc> key and select from the Exit menu whether you want to Save changes and exit; Discard Changes and exit.
Notebook User Guide 98  6.2  Using the Main Menu Setup Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot Exit   Item Specific Help  System Time: [08 :20 :32] <Tab>, <Shift-Tab>  System Date:  [08/09/2005]   or <Enter>       selects field.    4Primary Master  [SAMSUNG MP0603H- (PM)]   4Secondary Master [_NEC DVD+/-RW ND-6650A-(SM)]          System Memory:  640 KB    Extended Memory: 194560 KB    CPU Type:  AMD Turion (tm) 64     CPU Speed:  1600 MHz    BIOS Version:  0.3A-8042-8A20         F1 Help  Ç È Select Item   -/+  Change Values  F9  Setup Defaults Esc Exit  Å-->  Select Menu  Enter Select Sub-Menu F10 Save and Exit • System Time  Allows you to change the system time using the hour: minute: second format of the computer. Enter the current time for reach field and use the <Tab>, <Shift>+<Tab>, or <Enter> key to move from one field or back to another. You can also change the system time from your operating system.
Customizing Your Notebook 6 99  • System Date Allows you to set the system date using the month/date/year format.  Enter the current time for reach field and use the <Tab>, <Shift>+<Tab>, or <Enter> key to move from one field or back to another. You can also change the system time from your operating system. • Primary Master This field display various parameters for the hard disk drive. If type [Auto] is selected, the system automatically sets these parameters. If type [User] is selected, Cylinders, Heads and Sectors and other value can be edited. • Secondary Master  This field is for information only as the BIOS automatically detects the optical drive. • System Memory This field reports the amount of base (or conventional) memory found by the BIOS during Power-On Self-Test (POST). • Extended Memory This field reports the amount of extended memory found by the BIOS during Power-On Self-Test (POST). • CPU Type This field reports the CPU type information detected by the BIOS during Power-On Self-Test (POST). • CPU Speed This field reports the CPU speed information detected by the BIOS during Power-On Self-Test (POST). • BIOS Version This field is for information only as the BIOS displays the BIOS version during the Power-On Self-Test (POST).
Notebook User Guide 100  6.2.1 PRIMARY MASTER SUB-MENU   Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot Exit Primary Master   [SAMSUNG MP0603H-PM]  Item Specific Help  Type: [Auto]User = you enter   LBA Format  parameters of hard-disk  Total Sector:  117210240  drive installed at this  Maximum Capacity:  600012 MB   connection.      Auto = autotypes Hard-  Multi-Sector Transfers:  [16 Sectors]  disk drive installed here.  LBA Mode Control:  [Enabled]  CD-ROM = a CD- ROM  32 Bit I/O:  [Disabled]  drive is installed here.  Transfer Mode:  [FPIO 4 / DMA 2]  ATAPI Removable=  Ultra DMA Mode:  [Mode 5]  removable disk drive is        installed here.                      F1 Help  Ç È Select Item   -/+  Change Values  F9  Setup Defaults Esc Exit  Å-->  Select Menu  Enter Select Sub-Menu F10 Save and Exit Use the Type field to select the drive type installed. You can select different drive types as CD-DVD, User, Auto or None by pressing <Space> bar. Set this option to Auto so your computer will automatically detect the drive type during power on. Set this option to None when your computer is not installed any devices. Press <Esc> to return to the Main Menu.
Customizing Your Notebook 6 101  6.2.2 SECONDARY MASTER SUB-MENU  Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot  Exit Secondary Master: [_NEC DVD+/-RW ND-6650A-(SM)] Item Specific Help Type:  [Auto] User = you enter      parameters of hard-disk  Multi-Sector Transfers:  [Disabled]  drive installed at this  LBA Mode Control:  [Disabled]  connection.  32 Bit I/O:  [Disabled]  Auto = autotypes Hard-  Transfer Mode:  [FPIO 4 / DMA 2]  disk drive installed here.  Ultra DMA Mode:  [Mode 2]  CD-ROM = a CD- ROM       drive is installed here.       ATAPI Removable=       removable disk drive is        installed here.   F1  Help  Ç È Select Item   -/+  Change Values  F9  Setup Defaults Esc  Exit  Å--> Select Menu  Enter Select Sub-Menu F10 Save and Exit Use the Type field to select the optical drive type installed. Set this option to Auto so your computer will automatically detect the optical drive type during power on. Set this option to None when your computer is not installed any devices. Press <Esc> to return to the Main Menu.
Notebook User Guide 102  6.3  Using the Advanced CMOS Setup Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot Exit   Item Specific Help        Boot-time Diagnostic Screen  [Disabled] Display the diagnostic  Legacy USB Support  [Enabled]  Screen during boot  LAN Boot Control:  [Disabled]    Lid Wake Function  [Disabled]    Wireless LAN  [Enabled]                           F1 Help  Ç È Select Item   -/+  Change Values  F9  Setup Defaults Esc Exit  Å-->  Select Menu Enter  Select Sub-Menu F10  Save and Exit • Boot-time Diagnostic Screen Lets you display or not display the diagnostic screen by choosing Disabled or Enabled. • Legacy USB Support Enable or disable the USB Bus support when in connection with USB device. • LAN Boot Control: Lets you specify Enabled or Disabled for booting the notebook from Network. • Lid Wake Function
Customizing Your Notebook 6 103  Lets you specify Enabled or Disabled for waking up your NB computer from standby mode by opening your cover (lid).  • Wireless LAN Lets you specify Enabled or Disabled for activating or inactivating Wireless LAN Device function when system is booting.  6.4  Security Menu Setup Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot  Exit       Item Specific Help Supervisor Password Is: Clear User Password Is:  Clear  Supervisor Password      controls access to the  Set Supervisor Password  [Enter] setup utility.  Set User Password  [Enter]          Password on boot  [Disabled]    Fixed disk boot sector  [Normal]         F1  Help  Ç È Select Item   -/+  Change Values  F9 Setup Defaults Esc  Exit  Å--> Select Menu Enter  Select Sub-Menu F10 Save and Exit • Supervisor Password Is Set/Clear selections show that the notebook is under controlled by Supervisor Password or not. • User Password Is Set/Clear selections show that the notebook is under controlled by User Password or not.
Notebook User Guide 104  • Set Supervisor Password Supervisor password gives you the authority in accessing the setup utility. You also need to enter this password in system booting and resuming from suspend mode. When you press <Enter> in this field, the Set Supervisor Password dialog box appears. Enter a new password with up to 8 alpha-numeric characters, and then re-enter it for confirmation. • Set User Password This field is only available when Supervisor Password has set. Enter the user password when boot the system or resume from suspend mode. But if the Write Protect is set in the Fixed disk boot sector field, you should enter a supervisor password to access the fixed disk when boot the system or resume from suspend mode. • Password on Boot If  you set this field to Enabled, your computer will always ask for the password every time you boot your computer. • Fixed Disk Boot Sector If you set this field to Write Protect, the write protect boot sector on hard disk will protect against viruses. In this situation, only the supervisor can access the Boot Sector of fixed disk.
Customizing Your Notebook 6 105  6.5  Using the Boot Setup This item allows you to set the search drive sequence where the system will try to boot up first.   Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot  Exit   Item Specific Help  Boot Device Priority    CD \ DVD BD  Keys used to view or      Hard Drive  configure devices:     Up or Down arrows     Select a device.      <+> and <-> moves     the device up or down.                      F1  Help  Ç È Select Item   -/+  Change Values  F9  Setup Defaults Esc  Exit  Å-->  Select Menu Enter Select Sub-Menu F10 Save and Exit This page allows you to set the search drive sequence where the system will try to boot up first.  To select the boot device, you can use the up or down arrow key, then press <+> to move up the device in the list or press <-> to move down the device in the list. To exit from this menu, press <Esc>.
Notebook User Guide 106  6.6  How to Exit the Setup Program There are two choices to escape from the Setup program.  Phoenix BIOS Setup Utility  Main  Advanced  Security  Boot  Exit    Item Specific Help  Exit Saving Changes  Exit System Setup  Exit Discarding Changes   and save your   Load Setup Defaults   changes to CMOS.  Discard Changes      Save Changes                        F1 Help  Ç È Select Item  F5/F6 Change Values  F9  Setup Defaults Esc Exit  Å-->  Select Menu  Enter Execute Command  F10 Save and Exit • Exit Saving Changes Saves all changes to CMOS while running the BIOS setup program and exit from the system setup program. • Exit Discarding Changes Allows you to discard all changes made while running the BIOS setup program and exit from the system setup program. • Load Setup Defaults Lets you load the default values for all setup items. • Discard Changes Reverts to previously selected settings.
Customizing Your Notebook 6 107  • Save Changes Saves Setup data to CMOS.  6.7  How to Upgrade the BIOS Your computer uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS program. When you update the BIOS, any customized settings you made are lost. To upgrade the BIOS: 1. Insert the BIOS Update diskette into the diskette drive. 2. Power on the system with the diskette in the diskette drive. 3. On the DOS prompt, type the following command.  A:\>Phlash XXXXXX.ROM (BIOS filename)  or A:\>XXXXXX.BAT (Batch file for BIOS file) Press <Enter> to run this BIOS utility. After the system has been successfully run this program, a message similar to the following appears:  Flash memory has been successfully programmed, press any key to restart the system. If the system does not restart, turn it off, then turn on again. 4. Press any key to restart this system. Contact your dealer for the latest BIOS update file.
Using Options 7 109  7 Using Options   This chapter describes the advanced features and expandable architecture in your notebook. You can upgrade your system for specific requirements.
Notebook User Guide 110  System Upgrade This section provides some steps in doing system upgrade for your notebook computer. The upgrade procedures include the following: 7.1 Memory Upgrade Your notebook computer offers 200-pin SODIMM (Small Outline Dual Inline Memory Module) at least 256MB DDR-SDRAM. The memory compartment is located inside your computer. The table below lists the possible combinations of different memory module and memory size.  Please contact dealer for changing or adding DDR-SDRAM module. It is not available for users to change it by themselves. Based Memory  Installing Memory Total 256 MB  0 MB  256 MB 256 MB  256 MB  512 MB 256 MB  512 MB  768 MB 256 MB  1024 MB  1280 MB 512 MB  0 MB  512 MB 512 MB  256 MB  768 MB 512 MB  512 MB  1024 MB 512 MB  1024MB  1536 MB 1024MB 0 MB 1024 MB 1024MB 256 MB 1280 MB 1024MB 512 MB 1536 MB 1024MB 1024MB 2048 MB
Using Options 7 111  INSTALLING MEMORY MODULE Your computer comes with standard 256 MB, 512MB or 1024MB of synchronous DDR SDRAM. You can increase system memory to a maximum of 2048 MB in the system, by installing two small outline double inline memory modules (SO-DIMMs) with installed base memory in the system. The 256MB, 512MB and 1024MB memory modules are available: To install the memory module: 1. Make sure the system is powered off, the battery also is removed and that no peripheral devices are attached. 2. Turn the computer upside-down and locate the screws that secure the DIMM door at the underside of the notebook.  3. Remove the screws and open the DIMM cover by your finger.  4. Locate the memory module into the empty memory module sockets. (Your system comes with one memory module already installed in the socket.)  Avoid touching the exposed components inside the system. Doing so may damage the system.
Notebook User Guide 112  5. Insert the connector of the memory module into the socket. Make sure the notch of the memory module fits the nose of the socket. y  Hold the memory module at a 30-degree angle and push its  connector into the memory socket of the notebook.  y  Press down on the edge of the memory module until the locking    tabs on both sides is locked. 6. Put the DIMM door back and secure the screw on the DIMM door. 7. Turn the system over. To remove a memory module, push the locking tabs aside from the memory module until the module pops up. Then, remove the memory module.  7.2  Hard Disk Upgrade Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If the volume does not fit your need or it is crashed, you can upgrade it by replacing with new hard disk. Please do the following steps to change it. 1. Remove the screw and open the cover by lifting its upper side cover.  2. Take out the hard disk from the compartment by finger carefully
Using Options 7 113  3. Remove the connector from the hard disk gently. 4. Remove the crane screws located at each side of the hard disk. 5. Rotate and tighten the crane screws to the new hard disk. 6. Attach the connector to the new hard disk precisely. 7. Place the hard disk back to the compartment. 8. Cover the lid, then rotate and tighten the screws. 9. Set the boot device as DVD/CD-RW Combo drive and Primary Master as Auto on BIOS setup menu. Please refer to Chapter 6 about the setting of BIOS setup menu. Then, boot the system by using WinXP CD-ROM and the system will detect the hard disk automatically and prompt you how to format the new disk.   Please tighten the screws located at each side of the hard disk before operating the hard disk. Any vibration may cause damage for the running hard disk.  Please contact dealer or certified technician for changing the hard disk drive. The damage of changing HDD resulting from users may not be under warranty  7.3  Wireless Module Installation  This computer uses mini-PCI wireless LAN module at the bottom of this notebook for wireless connection.    Please contact dealer for adding or changing this module. Any damage that caused by inappropriately adding or changing this module will not be under warranty
Notebook User Guide 114
Caring for Your Notebook 8 115  8  Caring for Your Notebook   Your Notebook PC is a fully IBM compatible portable personal computer with the latest features in mobile computing and multimedia technology. Lightweight and compact, your Notebook PC runs on a whole wide range of general business, personal productivity, and professional applications, it is ideal for use in the office, at home, and on the road. Your Notebook PC also allows you for several levels of customization and expansion that are previously available only on desktop PCs.
Notebook User Guide 116  8.1  Important Safety Instructions Portable computers take the most beating from end users. This section gives you detailed information about how to maintain a safe working environment while using the notebook computer. You can maintain its condition and performance by following these guidelines. Please read it carefully to ensure maximum safety. • Before cleaning the notebook computer, make sure it is disconnected from any external power supplies (i.e. AC adapter, car adapter and so on). • When cleaning, do not use liquid or sprayed detergent for cleaning.  Instead, use moisture sheet or a cloth for cleaning. • The socket-outlet shall be installed near the notebook computer and shall be easily accessible. • Please keep the notebook computer from humidity. • Lay the notebook computer on a reliable surface when installing.  A drop or fall may cause injury. • The openings on the enclosure are for air convection hence the notebook computer can be protected from overheating. DO NOT COVER THE OPENINGS. • Be careful of using power supply. The notebook computer has specific power requirements. • Use only a power adapter approved for use with this notebook computer. • The power adapter may have a 2-prong plug. This is an important safety feature.  A compatible outlet is required. If it is not available, find a qualified electrician to install one.
Caring for Your Notebook 8 117  • While unplugging the power cord, disconnect it by the plug head, not by its wire. • Make sure the socket and any extension cords you may use can support the total current load of all the connected devices. • Though your AC adapter is suitable for universal international voltage, it still requires a stable and continual power supply. Make sure the voltage of the power source when connect the notebook computer to the power outlet. If your are unsure of your local power specifications, consult your dealer or local power company. • Place the power cord in such a way that people can not step on it.  Do not place anything over the power cord. • All cautions and warnings on the notebook computer should be noted. • If the notebook computer is not in use for a long time, disconnect it from mains to avoid possible damage by transient over-voltage. • Never pour any liquid into openings as this may cause fire or electrical shock. • Never open the body of notebook computer. For safety reason, the notebook computer should only be opened by qualified service personnel. • If one of the following situations arises, have the notebook computer checked by service personnel:  The power cord or plug is damaged.  Liquid has penetrated into the notebook computer.  The notebook computer has been exposed to moisture.  The notebook computer has not worked well or you can not get it work according to user’s manual.
Notebook User Guide 118   The notebook computer has dropped and damaged.  The notebook computer has obvious sign of breakage. • Do not leave this notebook computer in an environment unconditioned.  Storage temperature above 60ºC (140ºF) may damage the notebook computer. • An approved power cord has to be used for the notebook computer’s power supply.  For a rated current up to 6A and an equipment weight more than 3 kg, a power cord not lighter than H05VV-F, 2G, 0.75mm2, has to be used. • To avoid any damage happened to the internal device, you should first disconnect the AC adapter and remove the battery pack from the notebook when replacing any internal device. The sound pressure level at the operator's position according to IEC 60704-1 is equal or less than 70dB(A). 8.2  Cleaning Your Computer When it is necessary to clean the plastic case and keyboard, use a soft, lint-free cloth, slightly dampened with a mild detergent solution or use the contents of any commercially available computer cleaning kit. Never use alcohol, petroleum-based solvents, or harsh detergents to clean the notebook. Also never spray any liquids directly on the computer case, keyboard, or screen. If the liquid-crystal display (LCD) screen has become smeared or dusty, clean the screen by first applying a mild glass cleaner to a soft, clean, lint-free cloth, and gently wipe the glass. Never apply liquids directly on the screen surface. Moreover, do not use paper towels to clean the display screen. Paper can scratch the display screen matte.
Caring for Your Notebook 8 119  8.3  Maintaining the LCD Quality When it comes to screen problems, heat plays a big part. After a good working session, the typical routine is to shut the machine and close the cover. But the display surface - no matter what type it is - and the components inside the computer radiates heat; when you close the cover, you trap the heat against the screen. Leave the computer's cover open for about ten minutes while the heat disperses. Make this a habit. You should also enable the power management of your computer to turn off the LCD power and display when the system is in inactivity for some time. Adding screen savers is also acceptable. Follow the safety guidelines mentioned earlier and how to clean your computer. 8.4  Maintaining Your Hard Disk Losing your data has the same consequences as a system break down. Users must make it a habit of doing hard disk maintenance every week or so. Here is some maintenance you could do: • Always back up your data files from your hard disk. • Install the virus detecting program to monitor virus that could tamper your files. • Use SCANDISK once in a while to correct any errors found in the directory and File Allocation Table. This will also free up space from any unused sectors. • Never move or raise the computer while the hard disk is being accessed, most especially don't jar the hard disk as this may cause a hard disk crash.
Notebook User Guide 120  • Use hard disk maintenance programs like Disk Defragmenter of Windows. These reorganize your hard disk by eliminating fragmentation and improving your hard disk access time. • Install a system password in your computer so others won't be able to use the hard disk. 8.5  Battery Care Guidelines The battery pack furnished with the computer requires reasonable care and handling to ensure efficient operation and maximum life. There is a risk of fire and chemical burn if the battery pack is handled improperly. To ensure that the battery pack endures normal life cycle, always observe the following precautions when handling the battery pack: • Handle batteries carefully. Do not try to disassemble, crush, puncture, open, drop, mutilate, short external contacts, disposed of in water or fire, or expose it to temperatures higher than 60 C. • Recharge batteries only as described in this manual and only in ventilated areas. Never use an external charger other than the one supplied with your computer. • Do not leave batteries in hot locations for more than a day or two. • Do not leave your battery in your computer for longer than 1 month without plugging in the power adapter. • Do not leave battery in storage for more than 2 months without recharging it to prevent over discharge. Over discharge will hurt the battery • Dispose dead battery properly to protect the environment. The batteries contain hazardous chemicals and should not be thrown out with household or office trash.
Caring for Your Notebook 8 121  • You should always discharge your battery before recharging it on either of these two conditions: first, this is the first time you start to use your battery; second, you had not charge the battery for more than 2 months. To discharge the battery, please execute the "Battery Refresh" function in the BIOS Setup Utility. 8.6  When You Travel For safety and convenience when traveling, please follow these instructions: • Back up all needed files on your hard disk before traveling. • Recharge your battery overnight to ensure full battery power before you leave. • Don't forget to bring along the AC adapter and extra battery pack. • Try to bring backup software as well. • Check the voltage rating and the outlet type of your destination. If the power cord of the adapter is different, then you need to purchase a suitable one. Consult your dealer. • Carry your computer in its carrying case or in a briefcase. Never check-in the computer as a luggage. • Remember to apply those power saving features and techniques to save battery power.
Notebook User Guide 122
System Specification A 123  APPENDIX A  System Specification  This appendix gives information on the technical  and hardware specifications of your computer. Please note that the information mentioned here may not be exactly the same with your computer as specification is subject to change without notice or modifying this manual. Designed with an advanced modular architecture, your Notebook PC also allows you for several levels of customization and expansion that are previously available only on desktop PCs.
Notebook User Guide 124  PROCESSOR UNIT • AMD TurionTM MT-30~MT-40/AMD SempronTM 2800+ ~ 3400+  • 512KB/1M L2 Cache for AMD TurionTM  Processor 256KB L2 Cache for Mobile SempronTM  Processor  SYSTEM MEMORY • Two 200-pin memory slots   • User-upgradeable to maximum 2GB using 200-pin SODIMM 256MB, 512MB or 1024MB modules    • DDR –333/400 SDRAM modules   LCD DISPLAY • 15.4" WXGA  Color TFT LCD, 1280x800  • 15.4" WSXGA Color TFT LCD, 1680x1050 • Maximum 16M true colors on all LCD display VGA SYSTEM • Integrated ATI RS482M graphic engine   • Simultaneous LCD and external monitor (CRT) display • Maximum 16 million colors on LCD display at 1280x800 or 1680x1050 resolution for 15.4" LCD • Maximum 16 million colors on external monitor or projector at 1280x1024 resolution (Non-Interlaced)
System Specification A 125  STORAGE • 2.5” Format 9.5mm High PATA HDD Module; Bus Mastering, Ultra DMA ATA-133 Support for LBA Scheme • Enhanced IDE bootable DVD/CD-RW Combo drive module • Optional DVD Dual drive  • 4-in-1 (SD, MS, MMC, and MS_Pro) card reader  (BTO) AUDIO SYSTEM • Compliant with Intel HD Audio (Azalia). • H/W Audio Sound Blaster 16 compatible • Built-in dual speakers   • Audio input jacks for microphone (MIC) • Audio output jack for external speaker or headphone (Line-Out) • Digitized audio SPDIF port for high quality signal transmission. • Sound volume adjust by K/B Hot-Keys   EXPRESSCARD One 54mm, 26-pin ExpressCard slot GLIDE PAD  Integrated Glide Pad (Serial/USB mouse) pointing device with 2 click buttons
Notebook User Guide 126  KEYBOARD    • Full-sized 88-keys keyboard with Windows systems hot-keys, inverted T-cursor keys, 6 hot keys, 12 function keys, and embedded numeric keypad   • Provides international language keyboard    FLASH BIOS 512K Flash ROM BIOS for easy BIOS upgrade   I/O PORTS • 1 x TV-Out Port (S-Video)  • 1 x 15-pin VGA port  • 4 x Universal Serial Bus (USB 2.0) • 1 x IEEE 1394 port (BTO)   • 1 x 10Base-T/100Base-TX LAN port  • 1 x 56Kbps v.92 Data/Fax MDC Modem port  WIRELESS DEVICES • IEEE 802.11b/g,  Mini PCI Wireless LAN Solution  AC/DC POWER SUPPLY ADAPTER Universal auto-switching (100V~240V) 65W adapter, 20 Volt  BATTERY    • Rechargeable 6 Cells Li-ion battery pack with Smart Battery function • Approximately 3 Hours (for Battery Mark) Battery Life
System Specification A 127  WEIGHT AND DIMENSION • 357(W) x 259(D) x 25 ~ 34.6(H) mm • Approximately 2.7 kg
Notebook User Guide 128

Navigation menu