First Computer MB05TW Notebook Computer With 802.11b WLAN Module User Manual 2 of 2

Download:
Mirror Download [FCC.gov]
Document ID	335647
Application ID	7gnIx7YgIMMw4Lof/16v1Q==
Document Description	User Manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	325.18kB (4064754 bits)
Date Submitted	2003-06-26 00:00:00
Date Available	2003-06-26 00:00:00
Creation Date	2003-06-24 14:57:52
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-06-24 15:04:03
Document Title	User Manual 2 of 2

Fun with Multimedia
Using Your Notebook
This chapter describes how to operate the standard
built-in features of the notebook that you normally would
use in your day-to-day computer work. If you are new to
computers and to your operating system, you also need to
read the manual for the operating system on how to work
with your computer. It is very important to familiarize
yourself well with the operating system. The succeeding
chapters not only guide you to go beyond the basics, but
also try other exciting features.
35
N
otebook User Guide
3.1 Starting Your Operating System
The operating system is a must ingredient in using your computer. Without an
operating system, it is like playing chess without the chessboard. It is the
platform for all your software application programs to run on. The most
popular operating system today is Microsoft Windows. You should have
installed one operating system by your dealer unless you are an expert
computer user and would need a more powerful operating system. If you have
an operating system already installed in your computer, then you would be up
and running after you power on your computer and boot up the system. Check
your operating system manual on how to run it.
3.2 Understanding the Keyboard
Functions
Your notebook computer is equipped with an 88 keys keyboard that provides
all the functionality of a full-sized 101 or 102-key IBM keyboard. Aside from
the standard typewriter-layout keyboard of your computer, there are a number
of extra features and function controls on the built-in keyboard including
Windows system hot keys.
36
Fun with Multimedia
1. Function Keys
3. Windows Start Menu Key
5. Windows Shortcut Key
2. Control Keys
4. Control Keys
6. Cursor Control Keys
Keyboard
Key features and operations are described below:
•
Function Keys
Function keys are application-driven, like F1 through F12 can be found on
the keyboard. These keys work together with the Fn key to activate special
functions. Some keys (printed in blue on keypad) are preprogrammed with
dual functions.
•
Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction
with other keys to change their functions. To use control keys, press and
hold the control key while pressing another key. For example, "Press CtrlC" means to hold down the Ctrl key and type the letter C. Key
combinations work especially to the application you are running.
37
N
otebook User Guide
•
38
Windows keys
Use the following two keys to facilitate your work:
➟
Start Menu key
Displays the Start menu.
➟
Shortcut/Application key
Provides quick access to shortcut menus. This key acts like a right
mouse button.
•
Cursor Control keys
Cursor control keys let you position the cursor on the screen where you
want. In the screen, the cursor is a blinking underline, block, or vertical
bar depending on the application. The cursor indicates where the next text
typed is inserted.
•
Typewriter keys
Typewriter keys (also called alphanumeric keys) are used to enter text and
characters. Keys with blue print on them behave differently when
combined with control keys.
Fun with Multimedia
BASIC KEYBOARD FUNCTIONS
Keypad
 key. Execute a command. Within many
text editing application programs, the 
key inserts a hard carriage return, just like what
ordinary typewriter does.
 key. Press this key to cancel or escape
from a command or function.
Enter
Esc
 key. Known as the Insert key. Press this
key to toggle the keyboard data entry from insert
to type over mode.
Insert
NumLk
Shift
PrtSc
SysRq
ScrLk
Backspace
Shift
Shift + key. Known as the Print Screen
key. Press this key to map the whole screen to
share memory for your specific usage.
 key. Known as the Delete key. Press this
key to delete the character to the right of the
cursor, or delete marked texts or items.
Delete
Shift
Function Description
Pause
Break
Shift + key. Press this key to
temporarily halt execution of a command.
Pressing any other key to resume execution of a
command.
 key. Press this key to delete the
character to the left of the cursor.
 key. Press this key in combination with
alphabet letters to produce uppercase letters in
typing. Use this key in combination with those
two-character keys (found on the second row of
the keyboard) to produce the upper marked
keys. Also used in most application program in
39
N
otebook User Guide
Keypad
Function Description
combination with other keys to execute a certain
command.
 key. Press this key to move the cursor to
the next tab stop on the right. This key works
much the same as in ordinary typewriter.
 key. Known as the Control key. Used in
most application program in combination with
other keys to execute a certain command.
Tab
Ctrl
 key. Known as the Alternate key. Used in
most application program in combination with
other keys to execute a certain command.
Alt
Fn
Insert
NumLk
Caps
Lock
Fn
Delete
ScrLk
Fn + key. Activates the embedded
15-key numeric keypad. The keys are color
coded blue.
 key. Used in most application
program to always activate uppercase alphabet
characters.
Fn + key. Used in most
application program to scroll the screen without
having to move the cursor.
CURSOR CONTROL KEYS
Keypad
Function Description
Up arrow key. Moves the cursor up one line at a
time.
40
Fun with Multimedia
Keypad
Function Description
Down arrow key. Moves the cursor down one
line at a time.
Left arrow key. Moves the cursor to the left one
space at a time.
Right arrow key. Moves the cursor to the right
one space at a time.
SCREEN CONTROL KEYS
Keypad
Function Description
Home
 key. Moves the cursor to the
beginning of a screen or line.
PgUp
 key. Moves the cursor up one
screen at a time
PgDn
 key. Moves the cursor down
one screen at a time
End
 key. Moves the cursor to the
end of a screen or line.
WINDOWS HOT KEYS
41
N
otebook User Guide
Keypad
Function Description
 key. Pulls up the Windows Start menu.
 key. Performs a mouse right-click
function for Windows system.
SPECIAL FUNCTION KEYS
The notebook has special system function keys that activate key serving dual
functions. When pressed in conjunction with the  key, these keys set
specific system parameters and are sometimes referred to as "hot keys".
Keypad
Fn
Fn
Fn
Fn
42
F3
Function Description
Enable or Disables the built-in system
speaker.
Mute
F4
Press this key to activate the system into
the suspend mode.
Suspend
F7
Switches display between LCD, CRT, or
LCD and CRT simultaneously.
CRT
F8
Increases the brightness of LCD display
incrementally.
Fun with Multimedia
Keypad
F9
Fn
Function Description
Decreases the brightness of LCD display
incrementally.
3.3 Using the Glide Pad Pointing
Device
Your computer comes with a built-in Glide Pad pointing device that is found
on the center of the palm-rest surface.
The Glide Pad offers a number of options that let you customize how it
functions. To access these options, locate the Control Panel and double click
on the Mouse icon. The options let you control the size and color of the
cursor, cursor speed, the accepted double-click speed, and selection button
orientation.
The Glide Pad works a mouse pointing device replacement that is used under
Windows-based operating system. You can use the standard Microsoft driver
that is compatible with the Glide Pad device and is normally used under
Windows-based operating system. However, if you want to utilize the added
features of the Glide Pad, you may want to try installing its own device driver
that comes with added utilities for enhancing the function of the device.
43
N
otebook User Guide
1. Left Selection Button
3. Right Selection Button
2. Scroll Button
4. Glide Pad
Glide Pad Features
Here how to use the Glide Pad pointing device:
44
1.
The rectangular surface acts like a miniature duplicate of your display
screen. To move the mouse cursor, place the finger lightly on the sensor
pad and move in the desired direction. If you reach the end of the pad, lift
your finger and place it back down on the other side of the pad.
2.
To select an item, click on the item by pressing the left button control or
by simply tapping on the surface once. A light, quick tap always works
best. To execute an item, click the left button twice or do a quick double
tap on the surface.
Fun with Multimedia
3.
To simulate holding the mouse button down (dragging an icon or
selection), use the tap-and-drag gesture. This feels much like a doubleclick, except that the finger remains on the pad after the second tap: Tap,
lift, tap, hold and move. The simulated button remains held as long as the
finger remains on the pad.
4.
To scroll up or down the screen, just slide up or down the scroll button to
move the screen up or down.
☞ Avoid spilling any liquid on the Glide pad surface and always keep the
Glide pad surface and pointing finger dry from sweat built-up. Also do not
expose Glide pad to any magnetic source object.
3.4 Configuring Your Screen Display
The VGA display function of your notebook is based on a high performance
AGP local bus controller and is fully IBM VGA compatible. This controller
offers a large set of extended functions and higher resolutions especially useful
when you are connecting an external high-resolution and high-frequency CRT
or LCD.
Please Refer to Section 5 "Installing the Notebook Device Drivers" of Chapter
2 in this manual for the procedures on how to install the VGA device driver
under Windows. After installing the VGA driver, you would then configure the
display resolution or screen size to match your LCD display panel. This
notebook computer model provides 1024x768 as well as 1280x1024 LCD
panels. You would also probably want to set the amount of color output to
display sharper images and photos.
45
N
otebook User Guide
POSSIBLE DISPLAY CONFIGURATIONS
The table below shows you the possible display resolution you can set when
using either the LCD display or the external monitor (CRT):
Display
Possible Resolution
Maximum Colors
1024x768
XGA LCD
640x480
800x600
1024x768
640x480
800x600
1024x768
1280x1024
640x480
800x600
1024x768
1152 x 768
1280x1024
1400x1050
1800x1440
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
1280x1024
SXGA+ LCD
CRT Only
☞ 65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or
16M colors is equivalent to 32-bit true color.
☞ You can use the  +  hot-key to switch the display between LCD
only, CRT only, or both LCD and CRT display.
CHANGING THE DISPLAY PROPERTIES UNDER WINDOWS
To change the display properties of your screen under Windows system, just
right-click on the desktop area and select Properties or go to the Control Panel
46
Fun with Multimedia
and click on the Display icon. The Display Properties dialog box will appear on
your screen. Click on the Settings tab to set your desired configuration. Make
sure to follow the configuration table above.
☞ If you cannot configure the display properties, change the display driver
first as mentioned on Section 5 "Installing the Notebook Device Drivers" of
Chapter 2 in this manual. Consult your dealer for the latest Windows VGA
driver.
3.5 Knowing the Power Saving
Features
One of the great features in your notebook computer aside from its superior
performance is the ability to save energy power. Your computer is designed to
incorporate intelligent and advanced power management functions that turn
off power of most components when system is idle or not in use. This does
not affect the performance of your system as it monitors the activity of your
computer and resumes power and operating speed when activity is detected.
This feature not only gives you longer battery hours but cooler systems and
components as well. For more information on how to control the power
management features of your computer, refer to Power Management function
in Control Panel of Windows.
The definitions of power management mode are depicted as follows:
Full-On Mode
No device in the system is executed in power management, the system can
respond to all applications at maximum performance.
47
N
otebook User Guide
Suspend to RAM mode
All devices are powered off except the other supporting components and
system memory where your working files are stored. You can activate this
either pressing the power button or setting the Suspend timer on the Power
Management function of the Control Panel in Windows. To resume full-on
state, press the power button.
Suspend to Disk mode
When this mode is activated, the context of the entire system is saved to disk
and all components and devices are powered off, while all clocks are also
stopped (except Real Time Clock or RTC). You can activate this by setting the
Hibernate (Windows 2000/XP) mode on the Power Management function of
the Control Panel in Windows. To resume full-on state, you can press the
power button.
Mechanical off Mode
All power, except the RTC (real time clock), has been turned off from the
system. This includes external AC power source and battery power source.
3.6 Working with the Built-in HDD
Your notebook computer is equipped with a built-in large capacity 2.5 inch
IDE hard disk drive where you store or install your computer operating system
and all application software programs. You need to format the hard disk
before using. The internal hard disk is normally assigned as Drive C after
formatting. Sometimes divided into two partitions, adding a Drive D. Since
your computer supports different hard disk capacities (up to 60 GB), you also
need to setup the disk type first on your computer’s BIOS SETUP program
48
Fun with Multimedia
before formatting the disk drive. Your computer supports Auto-detect hard
disk type, so you do not need to set it manually. Your dealer should already
have done all of this for you. You can refer to Chapter 6 on how to run the
BIOS SETUP program.
You can increase the system’s storage capacity by replacing the standard hard
disk drive with a drive of greater storage capacity.
☞ If you wish to replace your hard disk, contact your local dealer for more
information about this dealer-installable device.
☞ Always turn off your computer first before removing the hard disk drive.
Failure to do so will damage the computer and the hard disk. Avoid jarring
or moving the computer while the hard disk is still being accessed.
3.7 How to Access the Optical Disk
Drive
Your system ships with an optical disk drive installed on the right side of your
computer. You would normally use the drive for installing operating system
and software application programs.
To insert and remove a disc on the drive:
1.
Make sure the computer is turned on. Press the eject button found on the
door cover of the optical disk drive. The CD tray mechanism will pop-out
slightly and slowly pull out the whole length of the tray.
2.
Place the disc on top of the CD tray with the label side facing up. Gently
press the compact disc onto the center spindle to secure the disc.
49
N
otebook User Guide
3.
To remove the disc, press on the center spindle and pull up the disc from
the side until the disc snaps out of the spindle lock.
☞ If the eject function is disabled by software or a power failure occurs, the
Emergency Eject Hole allows you to manually remove a CD from the
reader.
4.
To close the optical disk drive, simply push the CD tray inside. The
optical disk drive LED will activate when the disc is detected. Wait until
the LED has turned off and then start to read the disc.
How to care the CD
When you handle CDs, pay attention to the following guidelines:
•
Always pick up the CD by its edges.
•
Avoid scratching or soiling either side of the CD.
•
Do not write with the hard ball-point pen or apply labels on either side of
the CD.
•
Keep the CD away from direct sunlight or high temperatures.
•
Clean fingerprints or dust from the CD by wiping it with a soft cloth.
The above points also apply to other optical storage media.
50
Fun with Multimedia
☞ The optical disk drive is a Class 1 Laser Product.
3.8 Using PCMCIA Cards
WHAT IS PCMCIA?
PCMCIA or Personal Computer Memory Card International Association is a
non-profit trade association that defines the industry standard for the PC Card
technology. The goal of PCMCIA is to ensure that any PC Card can work in
any mobile computer built with a PCMCIA slot.
To allow manufacturers to add functions and technologies in the PC Card
form factor, PCMCIA has defined two PC Card types:
Type
Type II
Type III
Thickness
5.0 mm
10.5 mm
Sample Devices
Fax/Modem & Network Cards
Hard Disks (ATA Cards)
Type II Cards
Type II card has a thickness of 5.0 millimeters (mm). Type II cards are often
storage or communications devices such as Flash Memory, LAN, and Small
Computer System Interface (SCSI). Typical Type II cards include input/output
(I/O) features such as modems and LANs. The features for Type II Cards
include following characters:
51
N
otebook User Guide
•
Type II Extended Cards
Many PC cards are Type II extended cards. The extended card has an
additional physical component that protrudes beyond the traditional card
size. The extension can be as large as 40 mm deep by 9.65 mm high. This
extension provides room for additional electronics as well as a location for
external connectors. The GPRS card is an example. The extended part is
for additional electronics and antenna.
•
Communication Cards
Both network PC cards and fax/modem cards can use with your
notebook computer. However, if you use built-in LAN/Modem module
of this computer, it is not necessary to use those cards.
•
Storage Cards
When you insert a storage PC card, PC card Adapter for other memory
card (i.e. Compact Flash card, Smart Media card...) or small hard drive
card in the notebook computer, it appears as a unique drive depending on
the type of card you are using.
The following table provides sample drive designations.
Sample Drive Designations
Drive letter
C:
D:
E:
F:
Location/Device
Internal hard disk
Internal hard disk, 2nd partition
CD/DVD/RW/optical disk drive
Slot 0, high-speed memory card
Type III Cards
Type III cards are thicker (10.5 mm) than Type II cards and allow no
extensions. This notebook does not support Type III Card.
52
Fun with Multimedia
WHAT IS CARDBUS?
CardBus is the high-performance 32-bit PCI bus master interface from
PCMCIA. It runs up to 33MHz clock speed and operates at only 3.3V. Your
notebook computer incorporates the CardBus inside the PC card slot. Aside
from 3.3V CardBus PC cards, you can also insert 5V 16-bit PC cards that can
also be detected and used by your computer.
INSERTING AND REMOVING A PCMCIA CARD
Your computer includes hot swapping capability, that allows you to exchange
cards while the computer is turn on and start using it immediately.
Inserting PC Cards
To insert a PC card into the PCMCIA slot:
1.
Locate the PC card slot cover on the left side of the computer.
2.
Insert the side of PC card with the 68-pin socket into the PC slot. The
face label of the card should also be facing up.
3.
When the full length of the card is almost inside the slot, push firmly but
slowly, to ensure full connection with the computer. The PC card will be
detected and once the needed driver is installed, it will generate a beep
sound to indicate that the card is detected.
53
N
otebook User Guide
Removing PC Cards
To remove a PC card from the PCMCIA slot, you should first disable the
PCMCIA card setting in the system as described followings:
54
1.
Double click the PC card icon on the right bottom side of the task bar.
2.
Select the socket from the list that you want to remove, and click Stop
button. The system then disables the function of PCMCIA card.
3.
Then you can remove the inserted PC card, push the button found on the
right side of the PC slot to release the eject button. Then push it again to
release the PC card.
4.
When the PC card has moved out a space out of the slot, hold the edges
of the card and slowly slide it out.
Fun with Multimedia
MAKING PC CARDS WORK
Since PC cards come in different types and brands, making every card work on
your computer may not that be easy. PC cards like network, SCSI or
multifunction cards (MFC) need additional driver installation and configuration
in making the card work. This additional driver may already be built-in under
Windows that Windows will try to detect and prompts you if you want to
install the driver. If the driver is not included under Windows, you will need to
insert the driver CD provided by the PC card manufacturer into the optical
disk drive and install to Windows system. You need to read the manual guide
of the PC card on how to configure and operate the card.
☞ Some PC cards require additional system resources. Before inserting a PC
card you may have to disable either the USB port, or the 56K internal
modem. Check the Windows device manager to ensure that there are no
conflicts of resource amount those devices.
55
N
otebook User Guide
HOT SWAPPING PC CARDS
Just like floppy disk drive, your PCMCIA slots allow you to replace one PC
card with another even while your computer is on. However, you need to
remember the rule that if the PC card is in use, you must not remove it.
☞ PC cards draw power even when not in use. To save energy, press the
button to disconnect the card when it is not in use.
56
Fun with Multimedia
Fun with Multimedia
This chapter lets you make full use of all the
multimedia features of your computer in having fun
and excitement during work or leisure. You will learn
how to mix and match the built-in sound system, use
optical disk drive in creating an exciting full
multimedia presentation.
57
N
otebook User Guide
4.1 Notebook Multimedia Features
Your notebook computer is rich in multimedia features that make your
computing fun, comfortable, exciting and easy. Your computer is well able to
perform all multimedia tasks through the following:
•
Intel® Pentium® M microprocessor powered by Intel® Centrino™
Mobile Technology
•
Up to 1GB DDR SDRAM
•
Optical disk drive for DVD/CD watching/playing and CD making
•
Integrated Intel graphics engine.
•
16-bit Audio Sound System with built-in speaker and microphone.
4.2 Audio Sound System Features
Your computer has a built-in 16-bit stereo sound controller that allows you to
record, store, and playback voice, music and other sound effects with built-in
mixer controls. An integrated full-duplex microphone and twin mini-speakers
are also built-in into your computer to allow you to record and playback sound
anytime and anywhere.
On the right side of your computer, you will find the audio ports that include
the following:
58
•
External 1/8-inch microphone jack that connects external microphone for
recording purpose.
•
Earphone or headphone jack for personal listening.
•
External thumb-wheel volume control.
Fun with Multimedia
4.3 Setting Up the Audio Driver
Properties
Before you can start using the audio capabilities of your computer, you need
first to setup properly the audio driver after installing Windows. If you bought
your computer with Windows pre-installed, it is most likely that your dealer
have configured the sound driver for you. If not, you must refer to Chapter 2
on how to setup the sound drivers for Windows.
4.4 Windows Multimedia Programs
Windows provides several multimedia programs that you can run with the
built-in features of your computer. Pointing the Start button, Programs,
Accessories, then Entertainment, you will find the Multimedia programs
group. (The section below use Window XP as examples)
59
N
otebook User Guide
Figure 4-1 Entertainment Programs Group
The standard multimedia components are as follows:
•
Windows Media Player - for playing sound, video and animation files
•
Sound Recorder - for recording sounds and playback
•
Volume Control - for adjusting the volume of mixer
☞ For more information on how to operate these multimedia components, run
the program and click on the Help menu.
4.5 Recording Sounds
Your computer allows you to record voice and other sounds in several ways
and stores them as files on your hard disk. These voice or sound files can then
60
Fun with Multimedia
be played back through the internal speaker or earphone jack using an external
speaker, headphone, or earphone set. You can also use the files as voice
annotations on many applications for more real presentation. This section will
describe briefly how you can record sounds under Windows operating system.
To record sounds, you need to run the Sound Recorder program from the
Multimedia program groups. The control buttons of the Sound Recorder are
simple to understand which comprise of the Fast Rewind, Fast Forward, Play,
Stop, and Record buttons. Click the Help menu on how to operate the Sound
Recorder.
Figure 4-2 Sound Recorder
The Sound Recorder also allows you to record sound from different input
audio source like the following:
•
From the external microphone
•
From the optical disk drive
Since you could record sound from different input sources, you must first set
the proper audio input recording device under the Recording Control panel.
To do this:
1.
Double-click on the Volume Control on the taskbar or click Start button,
then point to Programs, Accessories, Entertainment and then click on
Volume Control.
61
N
otebook User Guide
2.
Click Properties in the Options main menu.
3.
Click the round button for Recording and tick off each component that
list in the "Shows the following Volume Controls" box.
Figure 4-3 Audio Properties
4.
62
Click OK and the Recording Control dialog box will appear. Here, you
will select the input device for the recording source. If you want to record
from the optical disk drive with audio music, you must click on CD
Player.
Fun with Multimedia
Figure 4-4 Recording Volume Control
USING AN EXTERNAL MICROPHONE
Your computer allows you to connect an external microphone for high quality
recording. The external microphone jack is found on the right side of your
computer. Use only microphone with 1/8-inch mini-jack connector. Follow
the same procedure for recording voice.
USING THE BUILT-IN OPTICAL DISK DRIVE
You would normally use the optical disk drive for recording audio music from
the Audio CD. Follow these steps:
1.
Activate CD Player volume on the Recording Control as discussed earlier.
2.
Run the Sound Recorder program.
3.
Insert the audio CD into the optical disk drive. Unless you have disabled
the CD auto-insertion notification for supporting Suspend mode, the CD
Player should automatically run after you have inserted an audio compact
disc and will start playing the audio CD.
63
N
otebook User Guide
Figure 4-5 Play Audio CD by Windows Media Player
4.
Select the starting point where you want to start recording.
5.
Switch to the Sound Recorder and press the Record button.
6.
Switch immediately to the Windows Media Player and press the Play
button. You can adjust the volume control so you can also hear the music
while in recording.
4.6 Playing Audio and Sound
Your computer has built-in twin speakers to playback audio and sound. You
can also adjust the volume manually by adjusting the thumb-wheel volume
control found on the right side of your computer.
64
Fun with Multimedia
For more quality sound output, you can choose to connect an external
amplified speaker or earphone from headphone jack. Always minimize the
volume first before placing the phone set to your ear.
USING THE WINDOWS MEDIA PLAYER
The easiest way to playback multimedia media files is to run the Windows
Media Player. Follow these steps:
1.
Click on Start, point to Programs, Accessories, and then
Entertainment.
2.
Click on Windows Media Player to start program.
3.
Click on the File menu and select the file you want to play.
4.
When the file is recognized and open, click on the Play button to start
playback.
4.7 Playing Video and MPEG Files
Your computer is capable of running video motion files as well as MPEG
(Motion Picture Expert Group) files on CD, DVD, or CD-RW. By using
software MPEG program, you can watch real full-motion picture on your
computer. You can also run the Windows Media Player under the
Entertainment programs group as well to show all media device programs.
65
N
otebook User Guide
Figure 4-6 Windows Media Player
4.8 Using Rewritable Optical Disk
Drive Function
CD-RW drive is a device that can write digital data to CD-RW and CD-R
compact disk (CD). With this device, you can backup your own data to CD-R
or CD-RW disc for mass data storage and safely retaining. The CD-R disc can
be written several times until the CD-R is full; the CD-RW disc, furthermore,
can write and erase data repeatedly. Please refer to the related user manual
about the CD-RW software.
☞ Please pay attention to the copyright of the software or data you want to
backup. Backup or distribute the software or data might be illegal
according the restriction of the law.
66
Fun with Multimedia
67
Connecting to Peripherals
Connecting to Peripherals
This chapter describes how you attach peripheral
devices to your notebook. You can attach a printer
or mouse; connect an external monitor and
keyboard, or any other peripheral device. You will
learn how to use these peripheral devices with the
step-by-step instructions depicted in this chapter.
69
N
otebook User Guide
5.1 Using the USB Port
USB or Universal Serial Port is a peripheral bus standard developed by
Compaq, DEC, IBM, Intel, Microsoft, NEC and Northern Telecom. Personal
computers equipped with USB will allow computer peripherals to automatically
configure as soon as they are physically attached - without the need to reboot
or run setup. USB will also allow multiple devices to run simultaneously on a
computer, with peripherals such as floppy drive, mouse, digital cameras,
scanners, printers, CD-RW drives, modems, keyboards, games devices and
acting as additional plug-in sites, or hubs.
☞ Depending on your operational requirements, you may need to disable
other ports in order to release system resource for the USB port.
5.2 Using an External Monitor Port
Your computer has a 15-pin Monitor port for supporting any external CRT or
LCD color monitor. You need a display signal cable (usually provided with the
monitor). One end of the cable must have a 15-pin connector for the system.
To connect an external monitor:
1.
70
Turn off your computer and make sure the monitor power switch is
turned off.
Connecting to Peripherals
☞ The notebook computer must be powered off or suspended while the
monitor is being connected. Although you can connect the external Monitor
without power off the computer and the external monitor, however, it is
harmful to both devices and it shortens the life of these devices.
2.
Connect the connector cable of the monitor to the VGA port at the back
of your computer. Secure the cable connection with the screws provided.
3.
Connect the monitor power cable and plug it into a properly grounded
wall outlet.
4.
Turn on the power of the monitor.
5.
Turn on your computer. Both the LCD panel and the monitor screen will
show the display. Your computer is set at default to run at simultaneous
display mode.
6.
If you only want to show the display on the external monitor or projector
and shut off the LCD display, you can use the  +  hot-key to
switch display type between LCD and external monitor. Keep pressing the
hot-key until you get the display to external monitor only.
☞ Refer to Chapter 3 regarding the possible External CRT resolutions and
how to change the display properties.
71
N
otebook User Guide
5.3 Using the IEEE 1394 Port
IEEE 1394 is a new I/O standard that is supported by Win98 (second edition)
or later Windows version. With supporting high-speed transmission and
delivering data at a guaranteed rate, you can record digital video clips and
download them directly via a super-speed IEEE 1394 port at the left of the
notebook. IEEE 1394 becomes an ideal for devices that need to transfer high
speed of data in real-time.
With built-in IEEE 1394 port, this computer enables the peripheral devices in
transmitting digital video data or data backup. To install the IEEE 1394 port
driver, please refer to Win98 (second edition) or later Windows version. The
Windows system will automatically recognize it in installing a suitable driver for
it. For other version of Windows, please visit Microsoft's web site for more
information about it.
Moreover, you should install the driver of peripheral device to connect with
the IEEE 1394 port, for details please refer to the manual that comes with
your peripheral device.
72
Connecting to Peripherals
☞ Please make sure that the external IEEE 1394 HDD box you purchase on
local electronic store should provide external power adapter. There are
different types of IEEE1394 HDD box and hard disk from different
manufactures, the power consumption has varied range. If the power of the
external IEEE 1394 HDD is supplied from the USB of this notebook, it may
not run properly.
5.4 Using the External Audio System
At the right side of your computer, you will find the built-in audio ports. You
can connect Microphone jacks, earphone or powered speaker.
To connect to a audio jack:
1.
Locate the audio port (Microphone, Headphone) that you want to use to
the target device.
2.
Plug the jack into the port on the right side of the system.
☞ If you use external speakers and experience the sound distortion or
feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speakers from each other, moving away the
external audio option from the unit may also help.
5.5 Using the LAN Port
This notebook comes with an internal 10Base-T/100Base-TX LAN module
that connects your computer to other computers/networks through a local
area network (LAN) and supports data transfer rates at 10Mbps and can be up
to 100Mbps. The 10Base-T standard also called Twisted Pair Ethernet is
connected with RJ-45 connectors. The 100Base-TX is based on the older
73
N
otebook User Guide
Ethernet standard. Because it is 10 times faster than Ethernet, it is often
referred to as Fast Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
To connect the twisted-pair cable to your LAN port:
1.
Locate the twisted-pair cable in the accessories box in notebook shipping
carton. Each end of the cable has a RJ-45 connector.
2.
Connect one end of the cable into the network wall outlet or HUB.
3.
Connect the other end of the cable into the computer RJ-45 LAN port.
5.6 Using the Wireless LAN
Wireless LAN is the major breakthrough in computer communication
technology. It lets user connect to the LAN environment without using any
wire to traditional RJ-45 jack. User can enjoy the wireless connection within
the range of Access Point (AP) of LAN.
Access Point (AP) is the wireless transmission and receiving device, it generally
connects to the server of a LAN environment or act as a LAN hub with
wireless connection. Access point can be set in an office environment, airport,
major railway station, etc. that depends on the construction of each country. In
74
Connecting to Peripherals
most case, you probably can use it at office, please consult with the network
department of your company for more details.
This computer integrates built-in IEEE 802.11b or 802.11 a/b wireless LAN
module, with using Intel ® PRO/Wireless network solution by Intel ®
Centrino™ mobile technology. IEEE 802.11b standard supports 11 Mbps
wireless connection speed. You can connect to the wireless LAN Access Point
without insert extra wireless LAN card into the PCMCIA slot.
Wireless LAN module is similar to LAN module. You need to install software
driver before using it. Please refer to chapter 2.5 on how to install the driver.
5.7 Using the Modem Port
This notebook comes equipped with a 56K internal fax/data modem that
allows you to communicate with others via fax, email, or to connect to an
online service or bulletin board.
The built-in fax/data modem provides on standard phone connector.
To connect the analog phone cable to your modem:
1.
Locate the analog phone cable in the accessories box in notebook
shipping carton. Each end of the cable has a RJ-11 connector.
2.
Connect one end of the cable into a standard wall outlet.
3.
Connect the other end of the cable into the computer modem port.
75
N
otebook User Guide
☞ The speed of data transmission is dependent on the quality of telephone
lines. Digitally terminated lines improve the speed of data transmission.
Contact your service provider for more information.
☞ The analog phone cable is an industry standard cable. Longer cables are
available at your local electronics store.
76
Customizing Your Notebook
Customizing Your Notebook
Your computer uses the Phoenix BIOS Setup
program that allows you to set several system
configuration in changing the way your computer
performs. This includes your system time and date,
disk drive configuration and password setup. This
information is then stored in the CMOS RAM and
will remain permanent unless you change it again.
This chapter discusses on how you will activate the
BIOS Setup program and change the system
configuration to suit your desired operation. You
must be careful to set the configuration properly in
order for your computer to run smoothly. If you are
not sure of any settings, contact your dealer.
77
N
otebook User Guide
6.1 Running the BIOS Setup Program
Your computer is likely to have been properly setup and configured by your
dealer prior to delivery. However, you may find it necessary to use the
computer’s BIOS (Basic Input-Output System) Setup program to change
system configuration information, such as the current date and time, or your
hard disk drive type. The Setup program can be accessed when you power on
the system and pressing the  function key.
The settings that you specify within the Setup program are recorded in a
special area memory called the CMOS RAM. This memory is backed up by a
battery so that is will not be erased when you turn off or reset the system.
Whenever you turn on the computer, the system will read the settings stored in
the CMOS RAM and compare them to the equipment check conducted during
the Power On Self Test (POST). If an error occurs, an error message will be
displayed on the screen, and you will then be prompted to run the Setup
Program.
As the POST (Power-On Self Test) executes during the boot up process, the
screen will display the following message:
Press  to Enter SETUP
Press the  key to run the BIOS Setup program. The BIOS Setup
program is organized into five menus which you can select using the <-- and -> keys. To move from one option to another, you use the up and down arrow
keys while using the  and , or <+>and <-> keys to change the
settings. On the right hand side of the screen are some brief help descriptions
of each item you want to change.
On the BIOS Setup program, you will find the following parts on the screen:
78
Customizing Your Notebook
•
Item Specific Help
The right side of the screen. This area describes each parameter and its
available settings.
•
Menu Bar
The top line of the screen. Each of the five selections displays its own
screen.
•
Parameters
The left side of the screen. This area lists the parameters and their current
settings.
•
Key Status Bar
The bottom part of the screen. These lines display the keys available to
move the cursor, select a particular function and so forth.
To exit the BIOS Setup program, simply press the  key and select from
the Exit menu whether you want to Save changes and exit; Discard Changes
and exit.
79
N
otebook User Guide
6.2 Using the Main Menu Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
System Time:
[12 :00 :00]
, ,
System Date:
[02/19/2003]
or  selects
LAN MAC Address
00-40-CA-C3-9A-07
field.
Boot Display Device:
[Both]
Primary Master
[30006MB]
Secondary Master
Installed CD/DVD
System Memory:
640 KB
Extended Memory:
112640 KB
CPU Type:
Intel Pentium-M Processor
CPU Speed:
1300 MHz
BIOS Version:
A.1A-2973-0812
F1 Help
Esc Exit
80
Select Item
--> Select Menu
-/+
Change Values
F9
Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
Customizing Your Notebook
•
System Time
Allows you to change the system time using the hour:minute:second
format of the computer.
Enter the current time for reach field and use the ,
+, or  key to move from one field or back to
another.
You can also change the system time from your operating system.
•
System Date
Allows you to set the system date using the month/date/year format.
Enter the current time for reach field and use the ,
+, or  key to move from one field or back to
another.
You can also change the system time from your operating system.
•
LAN MAC Address
This field reports the MAC address of the LAN module on your
notebook.
•
Boot Display Device
Lets you select the display device.
•
Primary Master
This field display various parameters for the hard disk drive. If type [Auto]
is selected, the system automatically sets these parameters. If type [User] is
selected, Cylinders, Heads and Sectors and other value can be edited.
•
Secondary Master
This field is for information only as the BIOS automatically detects the
optical drive.
•
System Memory
This field reports the amount of base (or conventional) memory found by
the BIOS during Power-On Self-Test (POST).
81
N
otebook User Guide
82
•
Extended Memory
This field reports the amount of extended memory found by the BIOS
during Power-On Self-Test (POST).
•
CPU Type
This field reports the CPU type information detected by the BIOS during
Power-On Self-Test (POST).
•
CPU Speed
This field reports the CPU speed information detected by the BIOS
during Power-On Self-Test (POST).
•
BIOS Version
This field is for information only as the BIOS displays the BIOS version
during the Power-On Self-Test (POST).
Customizing Your Notebook
6.2.1 INTERNAL HDD SUB-MENU
Phoenix BIOS Setup Utility
Main
Advanced
Security
Primary Master: [30006MB]
Type:
Boot
Exit
Item Specific Help
[Auto]
Select the drive type
LBA Format
corresponding to the
Total Sectors:
[58605120]
fixed disk installed
Maximum Capacity:
30006MB
in your system.
Multi-Sector Transfers:
[16 Sectors]
selected, Cylinders,
LBA Mode Control:
[Enabled]
Heads & Sectors are
32 Bit I/O:
[Disabled]
Edited directly.
Transfer Mode:
[FPIO 4/DMA 2]
Ultra DMA Mode:
[Mode 5]
If type USER is
F1 Help
Esc Exit
Select Item
--> Select Menu
-/+
Change Values
F9
Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
Use the Type field to select the drive type installed. You can select different
drive types as CD-ROM, User, Auto or None by pressing  bar. Set
this option to Auto so your computer will automatically detect the drive type
during power on. Set this option to None when your computer is not installed
any devices. Press  to return to the Main Menu.
83
N
otebook User Guide
6.3 Using the Advanced CMOS Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
NumLock
[LockOn]
Embedded Share Memory
[16MB]
Selects Power-on state
for NumLock
Quiet Boot
[Enabled]
Screen Expansion
[Disabled]
Legacy USB Support
[Enabled]
USB 2.0
[Enabled]
PXE OPROM
[Disabled]
Wake on LAN from S5:
[Enabled]
I/O Device Configuration
F1 Help
Esc Exit
84
Select Item
--> Select Menu
-/+
Change Values
F9 Setup Defaults
Enter
Select Sub-Menu F10 Save and Exit
•
Num-Lock
Lets you specify Enabled or Disabled for activating or inactivating NumLock function when system is booting.
•
Embedded Share Memory
Lets you specify the sharing memory size of the Video chip from DDR
SDRAM. The Default sharing size is 32MB. You should carefully specify
the value, since while the set value is too high, the memory size of your
software application will be reduced.
•
Quiet Boot
Lets you specify the boot screen to Logo screen or POST screen by
choosing Disabled or Enabled, respectively.
Customizing Your Notebook
•
Screen Expansion
Lets you choose full-size screen or reduced size screen for viewing the
display mode.
•
Legacy USB Support
Lets you specify Enabled or Disabled for activating or inactivating Legacy
USB Device function when system is booting.
•
USB 2.0
Lets you specify Enabled or Disabled for activating or inactivating USB
2.0 Device function when system is booting.
•
PXE OPROM
Lets you specify Enabled or Disabled for activating or inactivating PXE
OPROM Device function when system is booting. Please set it to default
value
•
Wake on LAN from S5
Lets you activate or inactivate the LAN function when system is booting
by specifying Enabled or Disabled option. Wake on LAN is a function
that you can boot the system from LAN remotely.
•
I/O Device Configuration
Lets you configure input/output device such as Serial Port, Parallel Port,
and Floppy disk controller.
6.3.1 PERIPHERAL SUB-MENU
P h o e n i x BI O S S e t u p U t i l i t y
Main
Advanced
Security
I/O Device Configuration
Serial port A:
[Auto]
Boot
Exit
Item Specific Help
Configure serial port A
85
N
otebook User Guide
using options:
Parallel port:
[Auto]
Mode:
[Bi-directional]
[Disabled]
No configuration,
[Enabled]
User configuration,
[Auto]
BIOS or OS chooses
configuration,
(OS Controlled)
displayed when
controlled by OS
F1 Help
Esc Exit
86
Select Item
--> Select Menu
-/+
Change Values
F9
Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
•
Serial port A
You can select the Enabled, Disabled, or Auto option for enabled or
disabled the port, or automatically sensed by BIOS or OS.
•
Parallel port
Allows you to select the Enabled, Disabled, or Auto option for enabled or
disabled this port, or automatically sensed by BIOS or OS.
•
Mode
Allows you to select a parallel mode as Bi-directional, EPP or ECP when
the parallel port is configured. When you set the configured parallel port
to Enabled, you need to set the parameter of Base I/O address and IRQ
for this port.
Customizing Your Notebook
6.4 Security Menu Setup
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Supervisor Password Is
Clear
Supervisor Password
User Password Is
Clear
controls access to the
Set Supervisor Password
[Enter]
setup utility.
Set User Password
[Enter]
Set Primary Hard Disk Password
[Enter]
HDD Password Status
Clear
Password on boot
[Disabled]
I/O Security
Modem:
[Enabled]
LAN:
[Enabled]
1394/CARDBUS:
[Enabled]
USB:
[Enabled]
Wireless LAN:
[Enabled]
F1 Help
Esc Exit
Select Item
-/+
--> Select Menu Enter
Change Values
F9
Setup Defaults
Select Sub-Menu F10 Save and Exit
•
Supervisor Password Is
This field will show Set or Clear that means whether this notebook is
controlled by Supervisor Password or not.
•
User Password Is
This field will show Set or Clear that means whether this notebook is
controlled by User Password or not.
87
N
otebook User Guide
88
•
Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming
from suspend mode. When you press  in this field, the Set
Supervisor Password dialog box appears. Enter a new password with up
to 8 alpha-numeric characters, and then re-enter it for confirmation.
•
Set User Password
This field is only available when Supervisor Password has set. Enter the
user password when boot the system or resume from suspend mode. But
if the Write Protect is set in the Fixed disk boot sector field, you should
enter a supervisor password to access the fixed disk when boot the system
or resume from suspend mode.
•
Set Primary Hard Disk Password
This password gives you the authority in accessing the Hard Disk. When
you press  in this field, the Set Supervisor Password dialog box
appears. Enter a new password with up to 8 alpha-numeric characters,
and then re-enter it for confirmation.
•
HDD Password Status
This field will show Set or Clear that means whether this notebook is
controlled by HDD Password or not.
•
Password on Boot
If you set this field to Enabled, your computer will ask for the password
each time you boot your computer.
•
Modem
Lets you specify Enabled or Disabled for activating or inactivating
Modem Device function when system is booting.
Customizing Your Notebook
•
LAN
Lets you specify Enabled or Disabled for activating or inactivating LAN
Device function when system is booting.
•
1394/CARDBUS
Lets you specify Enabled or Disabled for activating or inactivating
1394/CARDBUS Device function when system is booting.
•
USB
Lets you specify Enabled or Disabled for activating or inactivating USB
Device function when system is booting.
•
Wireless LAN
Lets you specify Enabled or Disabled for activating or inactivating
Wireless LAN Device function when system is booting.
89
N
otebook User Guide
6.5 Using the Boot Setup
This item allows you to set the search drive sequence where the system will try
to boot up first.
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
F12 Multi Boot Menu:
[Enabled]
PXE Boot with WOL:
[Disabled]
Keys used to view or
configure devices:
 expands or
collapses devices with
Boot Sequence:
a + or +Hard Drive
 expands
Removable Devices
all
CD-ROM Drive
 enables or
disables a device.
<+> and <-> moves the
device up or down.
F1 Help
Esc Exit
•
90
Select Item
-/+
Change Values
--> Select Menu Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
F12 Multi Boot Menu
Lets you specify Enabled or Disabled for activating or inactivating the
Multi Boot function by pressing F12 function key when system is booting.
Customizing Your Notebook
•
PXE Boot with WOL
This field is for information only as whether the BIOS can automatically
detect the PXE Boot with WOL status or not.
•
Boot Sequence
To select the boot device, you can use the up or down arrow key, then
press <+> to move up the device in the list or press <-> to move down
the device in the list.
6.6 How to Exit the Setup Program
There are two choices to escape from the Setup program.
Phoenix BIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit System Setup
Exit Discarding Changes
and save your
Load Setup Defaults
changes to CMOS.
Discard Changes
Save Changes
F1 Help
Esc Exit
•
Select Item
--> Select Menu
F5/F6 Change Values
F9
Setup Defaults
Enter Execute Command
F10
Save and Exit
Exit Saving Changes
Saves all changes to CMOS while running the BIOS setup program and
exit from the system setup program.
91
N
otebook User Guide
•
Exit Discarding Changes
Allows you to discard all changes made while running the BIOS setup
program and exit from the system setup program.
•
Load Setup Defaults
Lets you load the default values for all setup items.
•
Discard Changes
Reverts to previously selected settings.
•
Save Changes
Saves Setup data to CMOS.
6.7 How to Upgrade the BIOS
Your computer uses EPROM Flash BIOS chip that allows you to easily
upgrade the BIOS program. When you update the BIOS, any customized
settings you made are lost.
To upgrade the BIOS:
1.
Insert the BIOS Update diskette into the diskette drive.
2.
Power on the system with the diskette in the diskette drive.
3. On the DOS prompt, type the following command.
A:\>Phlash XXXXXX.ROM (BIOS filename) or
A:\>XXXXXX.BAT (Batch file for BIOS file)
4.
Press  to run this BIOS utility. After the system has been
successfully run this program, a message similar to the following appears:
Flash memory has been successfully programmed,
press any key to restart the system. If the
system does not restart, turn it off, then turn
on again.
92
Customizing Your Notebook
5.
Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
93
Caring for Your Notebook
Using Options
This chapter describes the most advanced features
and expandable architecture in your notebook. You
can upgrade your memory size to your system for
specific requirements.
95
N
otebook User Guide
7.1 System Upgrade
This section provides some steps in doing system upgrade for your notebook
computer. The upgrade procedures include the following:
MEMORY UPGRADE
Your notebook computer offers 200-pin SODIMM (Small Outline Dual Inline
Memory Module) at least 128MB DDR-SDRAM. The memory compartment
is located on the bottom of your computer. The table below lists the possible
combinations of different memory module and memory size.
☞ Please contact dealer for changing or adding DDR-SDRAM module. It is
not available for users to change it by themselves.
96
Based Memory
Installing Memory
Total
128 MB
0 MB
128 MB
128 MB
128 MB
256 MB
128 MB
256 MB
384 MB
128 MB
512 MB
640 MB
256 MB
0 MB
256 MB
256 MB
128 MB
384 MB
256 MB
256 MB
512 MB
256 MB
512 MB
768 MB
512 MB
0 MB
512 MB
512 MB
128 MB
640 MB
Caring for Your Notebook
Based Memory
Installing Memory
Total
512 MB
256 MB
768 MB
512 MB
512 MB
1024 MB
INSTALLING MEMORY MODULE
Your computer comes with standard 128MB, 256MB or 512MB of
synchronous DDR SDRAM . You can increase system memory to a maximum
of 1024 MB in the system, by installing one small outline double inline memory
modules (SO-DIMMs) with installed base memory in the system.
The 128MB, 256MB or 512MB memory module are available:
To install the memory module:
1.
Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2.
Turn the computer upside-down and locate the screw that secures the
DIMM door at the underside of the notebook.
3.
Remove the screw and open the DIMM cover by your finger.
97
N
otebook User Guide
4.
Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
☞ Avoid touching the exposed components inside the system. Doing so may
damage the system.
5.
Insert the connector of the memory module into the socket. Make sure
the notch of the memory module fits the nose of the socket.
Hold the memory module at a 30-degree angle and push its
connector into the memory socket of the notebook.
Press down on the edge of the memory module until the locking
tabs on both sides is locked.
6.
Put the DIMM door back and secure the screw on the DIMM door.
7.
Turn the system over.
To remove a memory module, push the locking tabs aside from the memory
module until the module pops up. Then, remove the memory module.
7.2 Hard Disk Upgrade
This section provides the steps in upgrading the hard disk for your notebook
computer. The upgrading procedures include the following:
UPGRADE HARD DISK
Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If
the volume does not fit your need or it is crashed, you can upgrade it by
replacing with new hard disk. Please do the following steps to change it.
1.
98
Remove the screws and open the cover by lifting its upper side cover.
Caring for Your Notebook
2.
Take out the hard disk from the compartment by finger carefully
3.
Remove the crane screws located at each side of the hard disk.
4.
Remove the connector from the hard disk gently.
5.
Attach the connector to the new hard disk precisely.
6.
Rotate and tighten the crane screws to the new hard disk.
7.
Place the hard disk back to the compartment and push the hard disk
forward into the connector side of the computer until the hard disk is
attached to the computer.
8.
Cover the lid, then rotate and tighten the screws.
9.
Set the boot device as optical disk drive and Primary Master as Auto on
BIOS setup menu. Please refer to Chapter 6 about the setting of BIOS
setup menu. Then, boot the system by using WinXP CD-ROM and the
system will detect the hard disk automatically and prompt you how to
format the new disk.
☞ Please tighten the screws located at each side of the hard disk before
operating the hard disk. Any vibration may cause damage for the running
hard disk.
99
N
otebook User Guide
☞ Please contact dealer or certified technician for changing the hard disk
drive. Any damage that caused by inappropriately adding or changing this
HDD will not be under warranty
7.3 Wireless Module Installation
This computer uses Intel ® PRO/Wireless 802.11b or 802.11 a/b wireless
LAN module for wireless connection.
☞ Please contact dealer for adding or changing this module. Any damage that
caused by inappropriately adding or changing this module will not be under
warranty
100
Caring for Your Notebook
Caring for Your
Notebook
Your Notebook PC is a fully IBM compatible
portable personal computer with the latest features in
mobile computing and multimedia technology.
Lightweight and compact, your Notebook PC runs on
a whole wide range of general business, personal
productivity, and professional applications, it is ideal
for use in the office, at home, and on the road.
Your Notebook PC also allows you for several levels
of customization and expansion that are previously
available only on desktop PCs.
101
N
otebook User Guide
8.1 Important Safety Instructions
Portable computers take the most beating from end users. This section gives
you detailed information about how to maintain a safe working environment
while using the notebook computer. You can maintain its condition and
performance by following these guidelines. Please read it carefully to ensure
maximum safety.
102
•
Before cleaning the notebook computer, make sure it is disconnected
from any external power supplies (i.e. AC adapter, car adapter and so on).
•
When cleaning, do not use liquid or sprayed detergent for cleaning.
Instead, use moisture sheet or a cloth for cleaning.
•
The socket-outlet shall be installed near the notebook computer and shall
be easily accessible.
•
Please keep the notebook computer from humidity.
•
Lay the notebook computer on a reliable surface when installing. A drop
or fall may cause injury.
•
The openings on the enclosure are for air convection hence the notebook
computer can be protected from overheating. DO NOT COVER THE
OPENINGS.
•
Be careful of using power supply. The notebook computer has specific
power requirements.
•
Use only a power adapter approved for use with this notebook computer.
•
The power adapter may have a 2-prong plug. This is an important safety
feature. A compatible outlet is required. If it is not available, find a
qualified electrician to install one.
Caring for Your Notebook
•
While unplugging the power cord, disconnect it by the plug head, not by
its wire.
•
Make sure the socket and any extension cords you may use can support
the total current load of all the connected devices.
•
Though your AC adapter is suitable for universal international voltage, it
still requires a stable and continual power supply. Make sure the voltage of
the power source when connect the notebook computer to the power
outlet. If your are unsure of your local power specifications, consult your
dealer or local power company.
•
Place the power cord in such a way that people can not step on it. Do not
place anything over the power cord.
•
All cautions and warnings on the notebook computer should be noted.
•
If the notebook computer is not in use for a long time, disconnect it from
mains to avoid possible damage by transient over-voltage.
•
Never pour any liquid into openings as this may cause fire or electrical
shock.
•
Never open the body of notebook computer. For safety reason, the
notebook computer should only be opened by qualified service personnel.
•
If one of the following situations arises, have the notebook computer
checked by service personnel:
➟
The power cord or plug is damaged.
➟
Liquid has penetrated into the notebook computer.
➟
The notebook computer has been exposed to moisture.
➟
The notebook computer has not worked well or you can not get it
work according to user’s manual.
103
N
otebook User Guide
➟
The notebook computer has dropped and damaged.
➟
The notebook computer has obvious sign of breakage.
•
Do not leave this notebook computer in an environment unconditioned.
Storage temperature above 60ºC (140ºF) may damage the notebook
computer.
•
An approved power cord has to be used for the notebook computer’s
power supply. For a rated current up to 6A and an equipment weight
more than 3 kg, a power cord not lighter than H05VV-F, 2G, 0.75mm2,
has to be used.
•
To avoid any damage happened to the internal device, you should first
disconnect the AC adapter and remove the battery pack from the
notebook when replacing any internal device.
The sound pressure level at the operator's position according to IEC 60704-1
is equal or less than 70dB(A).
8.2 Cleaning Your Computer
When it is necessary to clean the plastic case and keyboard, use a soft, lint-free
cloth, slightly dampened with a mild detergent solution or use the contents of
any commercially available computer cleaning kit.
Never use alcohol, petroleum-based solvents, or harsh detergents to clean the
notebook. Also never spray any liquids directly on the computer case,
keyboard, or screen. If the liquid-crystal display (LCD) screen has become
smeared or dusty, clean the screen by first applying a mild glass cleaner to a
soft, clean, lint-free cloth, and gently wipe the glass. Never apply liquids
directly on the screen surface. Moreover, do not use paper towels to clean the
display screen. Paper can scratch the display screen matte.
104
Caring for Your Notebook
8.3 Maintaining the LCD Quality
When it comes to screen problems, heat plays a big part. After a good working
session, the typical routine is to shut the machine and close the cover. But the
display surface - no matter what type it is - and the components inside the
computer radiates heat; when you close the cover, you trap the heat against the
screen. Leave the computer's cover open for about ten minutes while the heat
disperses. Make this a habit.
You should also enable the power management of your computer to turn off
the LCD power and display when the system is in inactivity for some time.
Adding screen savers is also acceptable.
Follow the safety guidelines mentioned earlier and how to clean your
computer.
8.4 Maintaining Your Hard Disk
Losing your data has the same consequences as a system break down. Users
must make it a habit of doing hard disk maintenance every week or so. Here is
some maintenance you could do:
•
Always backup your data files from your hard disk.
•
Install the virus detecting program to monitor virus that could tamper
your files.
•
Use SCANDISK once in a while to correct any errors found in the
directory and File Allocation Table. This will also free up space from any
unused sectors.
•
Never move or raise the computer while the hard disk is being accessed,
most especially don't jar the hard disk as this may cause a hard disk crash.
105
N
otebook User Guide
•
Use hard disk maintenance programs like Disk Defragmenter of
Windows. These reorganize your hard disk by eliminating fragmentation
and improving your hard disk access time.
•
Install a system password in your computer so others won't be able to use
the hard disk.
8.5 Battery Care Guidelines
The battery pack furnished with the computer requires reasonable care and
handling to ensure efficient operation and maximum life. There is a risk of fire
and chemical burn if the battery pack is handled improperly.
To ensure that the battery pack endures normal life cycle, always observe the
following precautions when handling the battery pack:
106
•
Handle batteries carefully. Do not try to disassemble, crush, puncture,
open, drop, mutilate, short external contacts, disposed of in water or fire,
or expose it to temperatures higher than 60 C.
•
Recharge batteries only as described in this manual and only in ventilated
areas. Never use an external charger other than the one supplied with your
computer.
•
Do not leave batteries in hot locations for more than a day or two.
•
Do not leave your battery in your computer for longer than 1 month
without plugging in the power adapter.
•
Do not leave battery in storage for more than 2 months without
recharging it to prevent over discharge. Over discharge will hurt the
battery
•
Dispose dead battery properly to protect the environment. The batteries
contain hazardous chemicals and should not be thrown out with
household or office trash.
Caring for Your Notebook
•
You should always discharge your battery before recharging it on either of
these two conditions: first, this is the first time you start to use your
battery; second, you had not charge the battery for more than 2 months.
To discharge the battery, please execute the "Battery Refresh" function in
the BIOS Setup Utility.
8.6 When You Travel
For safety and convenience when traveling, please follow these instructions:
•
Backup all needed files on your hard disk before traveling.
•
Recharge your battery overnight to ensure full battery power before you
leave.
•
Don't forget to bring along the AC adapter and extra battery pack.
•
Try to bring backup software as well.
•
Check the voltage rating and the outlet type of your destination. If the
power cord of the adapter is different, then you need to purchase a
suitable one. Consult your dealer.
•
Carry your computer in its carrying case or in a briefcase. Never check-in
the computer as a luggage.
•
Remember to apply those power saving features and techniques to save
battery power.
107
System Specification
APPENDIX A
System Specification
This appendix gives information on the technical
and hardware specifications of your computer. Please
note that the information mentioned here may not be
exactly the same with your computer as specification
is subject to change without notice or modifying this
manual.
Designed with an advanced modular architecture,
your Notebook PC also allows you for several levels
of customization and expansion that are previously
available only on desktop PCs.
109
N
otebook User Guide
PROCESSOR UNIT
•
Intel ® Pentium ® M processor by Intel ® Centrino™ mobile technology
•
Above 1.3 GHz Intel ® Pentium ® M CPU
•
1024KB integrated L2 cache for the processor
SYSTEM MEMORY
•
Two 200-pin memory slots
•
User-upgradeable to maximum 1024MB using 144-pin SODIMM 128MB,
256MB and 512MB modules
•
PC-266 DDR SDRAM modules
LCD DISPLAY
•
15" XGA (1024x768) or SXGA+ (1280 X 1024) Color TFT LCD
•
Maximum 16M true colors on all LCD display
VGA SYSTEM
110
•
Integrated Intel graphic engine
•
Simultaneous LCD and external monitor (CRT) display
•
Maximum 16 million colors on LCD display at 1280 x 1024 resolution for
15" LCD
•
Maximum 16 million colors on external monitor or projector at 1280 x
1024 resolution (Non-Interlaced)
System Specification
STORAGE
•
2.5” Format 9.5mm High HDD Module; Bus Mastering, Ultra DMA
ATA-100 Support for LBA Scheme
•
Enhanced IDE bootable optical disk drive
AUDIO SYSTEM
•
Full-duplex 16-bit stereo speaker with wavetable support
•
H/W Audio Sound Blaster 16 compatible
•
Built-in dual speakers
•
Audio input jacks for microphone (MIC)
•
Audio output jack for external speaker or headphone (Line-Out)
•
Built-in Thumb Wheel Volume Control
PCMCIA
•
32-bit CardBus PCI Local Bus PCMCIA controller
•
Supports 2 x Type II PC cards
•
Supports 32-bit Cardbus Cards, and 16-bit PC Cards
GLIDE PAD
Integrated Glide Pad (Serial/USB mouse) pointing device with left, right and
scroll buttons.
KEYBOARD
•
Full-sized 88-keys keyboard with Windows systems hot-keys, inverted Tcursor keys, 6 hot keys, 12 function keys, and embedded numeric keypad
111
N
otebook User Guide
•
Provides international language keyboard
FLASH BIOS
512K Flash ROM BIOS for easy BIOS upgrade
I/O PORTS
•
3 x Universal Serial Bus (USB 2.0) (1 set for U-Disk only)
•
1 x 15-pin VGA (CRT)
•
1 x IEEE 1394 port
•
1 x LAN port
•
1 x Modem port
WIRELESS DEVICES
•
802.11b or 802.11 a/b Wireless LAN (Intel ® PRO/Wireless network
solution by Intel ® Centrino™ mobile technology)
AC/DC POWER SUPPLY ADAPTER
Universal auto-switching 60W (100V~240V) adapter
BATTERY
112
•
Rechargeable 8 Cells Li-ion battery pack or 4 Cells slim battery pack with
Smart Battery function
•
Above 4 hours of usage with 8 Cells Li-ion battery pack (when run ZD
Battery Mark diagnostic program)
System Specification
WEIGHT AND DIMENSION
•
330 x 281 x 28.7mm (front) -32.7mm
•
6 lbs, 2.8kg
113

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2003:06:24 15:04:03+08:00
Create Date                     : 2003:06:24 14:57:52+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 79
Mod Date                        : 2003:06:24 15:04:03+08:00
Creation Date                   : 2003:06:24 14:57:52+08:00
Metadata Date                   : 2003:06:24 15:04:03+08:00

EXIF Metadata provided by EXIF.tools