Fisher Price 71638 Sound & Lights Monitor User Manual 18

Download:
Mirror Download [FCC.gov]
Document ID	171209
Application ID	O7u44O4boxHCWxdzY/mYUA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.04kB (550547 bits)
Date Submitted	2001-09-25 00:00:00
Date Available	2001-09-20 00:00:00
Creation Date	2001-09-14 09:53:08
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2001-09-19 11:38:17
Document Title	(18)
Document Creator	September 14, 2001 (18)
Document Author:	cee3

Fisher—Price“
wind 11 Lights
K MOflltOT
ull
Model Number: 71638
For proper setup and use, please read thus instructions.
Please keep this instruction sheet for future reference,
as it contains important information.
Includes mo AC adaptors to power transmittal and receiver (plug) inw
standard household outlets 420V AC), Receiver also runs on battery
power (9V alkaline battew — not included).
Adult assembly is required to install the battery (if used).
Tool needed for battery installation:
Phillips screwdriver (not included).
IMPORTANT!
A CAUTION
This product cannot replace
responsible adult supervision,
~ This product is not intended to be used as a medical monitor
and its use should not replace adult supervision.
' Test sound reception of receiver before first-time use and
whenever you change location of transmitter.
- To prevent entanglement:
- Never place transmitter in a crib or playpen. Keep transmitter
and receiver our of baby’s reach.
- Never use extension cords with the AC adaptors
- Never use transmitter or receiver near water (ie.: bathtub, sink,
laundry tub or wet basement, etc).
- Always use transmitter and receiver where there is adequate
ventilation.1‘u prevent uverheating, keep transmitter and ieceivei
away from heat sources such as radiators, heat registers, direct sun-
light, stoves,amplifiers, or other appliances which produce heat.
Consumer Information
Occasionally a consumer may experience a problem with one of our
products. If this should happen, please call us toll free, rather than
return this product to the store. Usually, we can solve the problem
over the telephone or send you replacement parts
Please call Fisher-Price® Consumer Relations, toll-free at
1-800-432-KIDS, between 8 AM - 6 PM EST, Monday through Friday
Hearing-impaired consumers usino TTYrT DD equipment,
please call 1-800-382-7470.
Or write to:
FMmr-Pllw’ Consumer Relations
636 Girard Avenue
East Aurora. New York 14052
Care
Excess dirt in transmitter microphone will hamper transmission of sound,
Clean outer surface oftransmitter and receiver with a cloth lightly damp-
ened with a mild cleaning solution.
Never immerse transmitter, receiver or AC adaptors
Receiver Battery Installation (Optional)
9v l6LR61)
°°"‘"’""“’“ °°°’ SHOWN ACTUAL SIZE
~ Locate battery compartment door on bottom of receiver.
' Loosen screw on battery compartment door with a Phillips
screwdriver. Remove battery compartment door.
~ Snap terminals of a fresh, 9V alkaline battery into
receiver connectors,
' Replace battery compartment dootTlghten screw wrth a
Phlllips screwdriver.
Battery Tips
° Remove the battery during long periods of non-use. Always
remove an exhausted battery from the product. Battery leakage
and corrosion can damage this product Dispose of battery safely.
~ Do not dispose of batten; in a fire.The battery may explode
or leak
- Never short circuit the battery terminals.
- A non-recharaeable battery is not to be recharged
' Only a battery of the same or equivalent type as recommended in
the "Battery Installation” instructions is to be used,
. Ira removable rechargeable battery IS usEdl it is only [0 be charged
under adult supervision.
~ A rechargeable battery is to be removed from the product before
it is charged.
- lf you use a battery charger, it should be examined regularly for
damage to the cord, plug. enclosure and other partsr Do not use
a damaged battery charger until it has been properly repaired,
Setup 3 Use
Setup 699 Use
IMPORTANTI Test sound reception of this monitor before first time
use and whenever you change location of transmitter (see page 4).
Set transmitter channel switch to same channel as receiver.
Place transmitter in same room with child Point microphone
directly toward crib or play area.
Unwrap and fulty extend AC adaptor cord for best transmission
insert AC adaptorjack into transmitter socket and plug into
wall outlet.
Rotate transmitter power dial to turn power on. Power
indicator lighst
Place receiver where you will see or hear it.
Unwrap and fully extend AC adaptor cord for best recep-
tioansert AC adaptor jack into receiver socket and plug into
wall outlet.
NotezTo use a W alkaline battery for power source, refer to
“Receiver Battery installation” instructions on page 3.
Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume.
Mal-<2 At‘ adaptnr i: no vAr, finH7, aw input; 9 vnr mnmA mirpl It:
center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.
if you have any questions about this product:
In Canadmcah 1-500-557-7724, or write to: Mattel Canada |nc.,61 55 Freeman! Blvd,
Mississauga, Ontario LSR 3W2.
MW
in Australia, Mattel Australia Pty.Ltd1658 Church Street, Locked Bag lr870.
Richmond, Vlctoria 3121 Australia Consumer Advisory Service 1-800-8410‘51 2 (valid
only in Austraii
Testing Sound Réécption
Test transmitter transmission and receiver reception
each time you change location of use.
Power
Indicator
Place transmitter in room in which
you intend to use it. Rotate transmitter
power dial to turn power on. Power
indicntvr |ight§.Turn on a radio.
Hint: All five dots in receiver
”you rum receiver powerofl 7
noise. Tum volume down on
- if the receiver is too far away i
the transmitter.
- If laud sounds are transmm ‘
Power
Indicator
PowerNolurne
Dial
Place receiver in room in which
you intend to use it. Rotate
power/volume dial to turn power
on. Power indicator lights. Adju>l
receiver location.
- Variable light display lights when
sound is received by receiver:
- One or two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
- If you experience interference
(buzzing or static, etc.) while using
one channel setting, switch both
unih [0 other channel. Selecting
a channel is usually a one time
adjustment.
incrpomr. You will also hear slum
tum transmitter power on.
Problems 61” Solutions
taker
Problems 69° Solutions
PROfiEMS SOLUTIONS
Transmitter power indicator Turn transmitter power on.
not lit. Power indicator lights.
You hear static or buzzmg Make sure channel switches on
from receiver. both transmitter and receiver are
, set to same channel.
Transmitter power indicator Make sure light switch that
not lit. controls power flow to wall
outlet IS on,
Transmitter power indicator Check AC adaptor cord
not lit. plug~to-outlet connection.
Transmitter power indicator Power is off because circuit breaker
not lit. for baby's room is off. Make sure
house fuses and circuit breakers
are On.
You hear static or buzzing and Check all five solutions above.
all five dots lit on receiver: Any one or more of these solutions
should solve the problem.
Hint: If, after checking all ofthae solutions, yau believe that your
AC adaptors are damaged, please call fisher-”ice” at l —800-432-K[DS.
Problems 59” Solutions
PRCQLEM SOLWION
You hear static or buzzing Receiver is out of range of
from recelven transmitter Move receiver
closer to transmitter.
Note: Range varies depend-
ing on mrroundinq condi-
tions such as noise levels,
physica| obstructions and
signal interference.
Hint: If you cannot hear yourchfld Mdfilfifi dots do not light, your
rpraiver battery is weak Rem receiver ' with a fresh, Wall/ruling
battery or use AC adaptor forpowefm ‘ ‘ ‘
Problems 6? Solutions
4}
an
E3
Efl
124 you read
about v”
L ("o
h A
“mum I'H'I'IM
PROBLEM
You can hear conversations or sounds from other homes.
10
”le must
be sum
vmr Armr '
"Wain, Wain
Wah .,"
SOLUTION
There is signal interference due to other nursery monitors on same
channel or cordless telephone user Change channel dials on both
transmitter and receiver to eliminate source of interference.
Hints:
~ Do not use more than one transmitter and one receiver at same time
in same household.
— Always remember that you are using public airwaves when using
your monitor. Conversations, even from rooms near transmitter, may
broadcast to other nursery monitors, radios, cordless telephones, or
scanners outside your home. Topratect privacy of your home, always
turn transmitter off when not in use.
11
FCC Note (United States Only)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installationfflwia equipment generates, uaca and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that Interference will not occur In a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
. Rmrient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected,
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION.Changc> or modifications not expressly approved by the monufne—
turer responsible for compliance could void the user’s authority to operate
the equipment.
Sound‘rl Lights Monitor
Model Numberz71638
nits device complies with Pull |5 pfthe rcc Rules. Operation ls subject to the
following two conditions: (1 )This device may not cause harmful interference
and (2) this device must accept any interference received, including interfer-
ence that may cause undesued operation.
Sound 'n Lights Monitor
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
One (1) Year Limited Warranty
Eisnererice, lncszs Guard Avenue, East Aurora, New York was: warrants lhat the Sound 'n Lighls Monitor W tree
irom all defects in material and workmanship when used under normal conditions for a period olone in year rnrrrr
the ooreorwrelmesnwlo are product ro perform properly,we mlr repair or replace .r at our option flee or
charge.Purchasel is responsible tor shipping the product ll) consumer Realrlons a! the address indicated above and
lovall associated freight and insurance cost Fisher-Price, lne. will bear the cost oi shipping the repaired or replarm
item to yonms warranty is vflld ii the owner repairs or modifies the producl This warranty excludes any llabrlrly
mhflthan mat expressly stated above Intlufllng but not lrmrleo to any Incidental or consequential damages
SOME STATES Do NOT ALLOW m5 EXCLUSION on thlmloN or INCIDENTAL on CONSEQUENTiAt DAMAGES.
SOTHE ABOVE LIerAnoN OR EXCLUSlON MAV No'r APPLY TO vou
mus meANTV am; you sr-tcrrrc tea/u nICNTS, AND you MAY ALSO unvc omen incurs wulcu MIN vAlw
FROM SiflYETO STATE,
Fisheerrice, lnca subfldiary or Mattel, Inc, East Aurora, New York mosz. U s A
ozool ManelJneAll Rights Reserved.
0 and V- designate us trademarks of Mattel, inc.
Printed in China 7l HEW—0920

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : September 14, 2001 (18)
Create Date                     : 2001:09:14 09:53:08
Title                           : (18)
Author                          : cee3
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2001:09:19 11:38:17-04:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools