Fisher Price 77149T Toy Remote Control User Manual manual
Fisher-Price Inc. Toy Remote Control manual
manual
One Year Limited Warranty
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to: Fisher-Price®Consumer Affairs,
636 Girard Avenue, East Aurora, New York 14052.
CANADA, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Questions? 1-800-567-7724. GREAT BRITAIN, Mattel U.K., Ltd., Helpline: 01628 500303.
AUSTRALIA, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
ConsumerAdvisory Service 1-800-800-812 (valid only in Australia).
Printed in China 77149pr-0920
Slithering Jake™
the RC Snake
®
Model Number 77149
Fisher-Price, Inc. 636 Girard Avenue, East Aurora, New York 14052 warrants
to the original owner that the Slithering Jake™the RC Snake®is free from all
defects in material and workmanship when used under normal conditions for a
period of one (1) year from date of purchase.
Should the product fail to perform properly, we will repair or replace it at our
option, free of charge. Purchaser is responsible for shipping the product to
Fisher-Price Consumer Affairs at the address indicated above and for all
associated freight and insurance cost. Fisher-Price will bear the cost of shipping
the repaired or replaced items to you. This warranty is void if the owner repairs
or modifies the product. This warranty excludes any liability other than that
expressly stated above, including, but not limited to, any incidental or
consequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
• Please keep these instructions for future reference.
• Requires four “C” (LR14) batteries for the RC snake and one 9 volt (6LR61)
alkaline battery for the remote (Batteries not included).
• Adult assembly required for battery installation.
• Tool needed for battery installation: Phillips screwdriver (not included).
• Meets requirements of Council Directives - 99/5/EC, 89/336/EEC,
88/378/EEC
• Suitable for use in all EC member states
Rough Comp!
For Approval Only
1
Assembly
•Insert and "snap" the breakaway
tail into the RC snake's body.
• Hint: The RC snake’s breakaway tail
may detach from the body during
play. If this happens, simply insert
and “snap” the breakaway tail into
the body.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion can
damage this toy. Dispose of
battery(ies) safely.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not
to be recharged.
• Only batteries of the same or
equivalent type as recommended in
the "Battery Installation/Replacement"
instructions are to be used.
• If removable rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it should
be examined regularly for damage
to the cord, plug, enclosure and
other parts. Do not use a damaged
battery charger until it has been
properly repaired.
Body Breakaway Tail
1.5Vx 4
“C” (LR14)
Shown Actual Size
9V (6LR61)
Shown Actual Size
Remote RC Snake
Battery Installation
•Hint: The 9 volt (6LR61) battery in the remote has a longer life than the "C"
batteries in the RC snake. You may need to change the "C" batteries more often
than the 9 volt battery.
• When you notice that the RC snake does not respond to the remote, try replacing
the batteries in the RC snake before replacing the batteries in the remote.
•When the RC snake stops working or works erratically, it's time for an adult to
replace the batteries!
• Locate the battery compartment on the bottom of the remote and bottom of
the RC snake.
• Loosen the screw in each battery compartment door with a Phillips
screwdriver. Lift to remove each door. (The screw will remain in each door.)
• Snap the battery into the battery contacts, as shown. Insert the batteries into
the battery compartment.
• Replace each battery compartment door and tighten each screw with a
Phillips screwdriver. Do not over-tighten.
Battery
Compartment
Door
Battery
Compartment
Door
2
3 4
Using the Remote Let's Go
CAUTION
To prevent entanglement, keep hair away from wheels.
•FORWARD: Press and hold the right button on the remote.
•REVERSE: Press and hold the left button on the remote.
On/Off
Button
• Press the on/off button to turn the
RC snake on or off.
Note: The button will light up when
power is on.
To move backward:
• Point the remote at the RC snake,
press and hold the reverse button.
• Slithering Jake™strikes, coils back
into a circle and turns. Watch his
tongue as he strikes!
To change directions:
• Point the remote at the RC snake
and press the reverse button.
Slithering Jake™ coils back into a
circle and turns.
• When Slithering Jake™ is facing
the direction you want to go, press
and hold the forward button on
the remote.
To move Forward:
• Point the remote at the RC snake, press and hold the forward button.
• As Slithering Jake™slithers forward, his tongue moves in and his eyes light up!
Forward
Reverse
Play Safely! Do not operate RC snake in the street.
6
Care
5
• The RC snake works best on smooth, hard surfaces. We do not recommend
use on grass, loose dirt or wet surfaces. For best performance make sure the
transmitter and the receiver are in direct line of sight, free of obstacles.
• If the RC snake operates erratically or does not respond to the remote, move
the RC snake closer to the remote. If the RC snake still fails to respond to the
remote, it’s probably time for an adult to replace the batteries.
• In the unlikely event that use of the remote interferes with normal use of other
remote controlled equipment, such as televisions and stereos, or use of other
electric or battery powered appliances interfere with operation of the RC
snake, do not use both appliances at the same time.
• Do not lift up or carry the RC snake or remote by the antenna.
• Do not leave the remote face down or in a drawer or toy box. Light pressure
on the remote buttons can activate the remote and drain the batteries.
• To clean, wipe all parts with a damp cloth. Never immerse the remote or the
RC snake.
Important Notes FCC Note (United States Only)
Slithering Jake™the RC Snake®
Model Number: 77149
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Slithering Jake™the RC Snake®
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
This device generates and uses radio frequency and if not used properly, may
cause interference to radio and television reception. It has been tested and
found to comply with the limits set by the FCC, which are designed to provide
reasonable protection against such interference.
Caution: FCC Regulations state that changes or modifications to this product
not expressly approved by the party responsible for compliance may void the
user's authority to operate the equipment.