Fisher Price DNV31-15 Smart Toy Bear (DNV31), Smart Toy Panda (DNV30), Smart Toy Monkey (DNV32) User Manual DNV31 0971 1100893774 DOM IS 091115 indd
Fisher-Price Inc. Smart Toy Bear (DNV31), Smart Toy Panda (DNV30), Smart Toy Monkey (DNV32) DNV31 0971 1100893774 DOM IS 091115 indd
User Manual
31
© & ™ Mattel and Smart Toy LLC. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, except as noted.
DNV31-0971
PRINTED IN CHINA 1100893774-DOM
UNITED STATES
1-800-432-5437
Fisher-Price, Inc.
636 Girard Avenue, East Aurora, NY 14052
Hearing-impaired consumers: 1-800-382-7470
CANADA
1-800-432-5437
Mattel Canada Inc.
6155 Freemont Blvd.
Mississauga, Ontario L5R 3W2
Remark:
Revision Date ID# Changes
Primary - pr 06/30/2015 DNV31-0970-1100893774-DOM NA
a 08/05/2015 DNV31-0970-G1-1100893774-DOM Add Apple & Android legal.
b 09/11/2015 DNV31-0971-1100893774-DOM change copy & images.
Read this manual carefully for important safety
information and operating instructions before
using this toy.
Keep these instructions for future reference,
as they contain important information.
Includes 1 non-replaceable 3,7V rechargeable
(LiPo) battery. Battery Capacity: 2000 mAh.
Requires a USB power brick (not included) and
charger cord (included) to charge the battery.
Charging should only be done by an adult. The
charger cord is not a toy.
Wi-Fi enhances real-time play when you download
the parent app.
Frequency: 2,4 GHz
Parent app works with Apple® iPhone®, iPad®
and Android™ devices. For a full list of compatible
devices and to download the app, go to:
http://www.smarttoy.com/app
Apple, iPhone and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Android is a trademark of Google Inc.
456
• Charge the battery until the power button light turns green.
It will remain green until you remove the charger cord from
Smart Toy.
• Once the battery is charged, remove the charger cord from the
socket in Smart Toy. Then remove the charger cord from the
USB brick and unplug the USB brick from the wall outlet.
• A fully charged battery should last for about 3½ hours of
continuous play.
Green: Full Charge
White: Power ON
Red: Low Battery
Yellow: Charging
• Smart Toy’s power is completely OFF in package. To turn power
ON, press and hold the power button for up to 10 seconds until
it lights up. For first time use, Smart Toy will take about a minute
to boot up.
• If Smart Toy is left idle for more than 10 minutes, Smart Toy
enters sleep mode and the power button light turns off. Press
the power button to turn power back ON (and the power button
lights up).
• To turn power completely OFF, press and hold the power button
for up to 10 seconds until the light turns off. When power is
completely OFF, you’ll need to press and hold the power button for
up to 10 seconds until it lights up.
Power Button
• Smart Toy is ready for play right out of the package. For best
performance, fully charge the battery very soon!
1 Open the fasteners on the back of Smart Toy.
2 Plug the smaller end of the charger cord into
Smart Toy’s socket.
3 Plug the other end of the charger cord into a USB brick
(not included).
4 Plug the USB brick into a standard wall outlet. A fully charged
battery may take up to 3 hours.
Hint: You can also plug the charger cord into the USB port in your
computer. A fully charged battery may take up to 8 hours.
1
24
3
USB Brick
(not included)
789
• Hold the card approximately 4 inches (10,2 cm) from
Smart Toy’s nose. You’ll hear a tone when Smart Toy
recognizes it.
Hint: Smart Toy doesn’t like bright or dim light.
4 inches
(10,2 cm)
2 Create a
parent account
1 Download the parent app (go to
http://www.smarttoy.com/app)
and open app
5 Touch the settings
icon on the home page
3 Connect Smart Toy
to the app (Apple®
iPhone®, iPad® screen
shown above)
6 Slide the volume bar4 Create a child account
Here’s how to adjust volume!
• If Smart Toy becomes unresponsive or doesn’t perform as
expected, first try turning power completely OFF (press and hold
the power button for up to 10 seconds until the light turns off)
and then back ON (press and hold the power button for up to 10
seconds). If this doesn’t work, it may be time for a reset. Follow
the instructions below:
- Open the fasteners on the back of Smart Toy.
- Insert a pointed object into the reset hole above the charging
socket. Press until Smart Toy begins talking.
- Remove the pointed object and close the fasteners on the back
of Smart Toy. Resetting Smart Toy will take about 8 minutes.
- After a reset, all of the stored information received will be
erased. You’ll need to re-connect Smart Toy again with the
parent app and be patient as Smart Toy gets reacquainted with
your child.
Choose a Smart Card for a fun activity.
Settings
Volume
Bar
10 11 12
• This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause interference; and (2) This device
must accept any interference, including interference that may cause undesired operation of
the device.
• Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.However, there is
no guarantee that interference will not occur in a particular installation.If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre son fonctionnement.
Adults note: Periodically
examine this battery charger
for damage to the cord,
housing or other parts that
may result in the risk of fi re,
electric shock or injury. If the
battery charger is damaged,
do not use it.
• Protect the environment by not disposing of this product with
household waste (2012/19/EU). Check your local authority for
recycling advice and facilities.
• Smart Toy is surface wash only. Do not immerse.
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Rechargeable batteries are only to be charged under
adult supervision.
• The supply terminals are not to be short-circuited.
• Dispose of batteries safely.
• Do not dispose of this product in a fire. The batteries inside may
explode or leak.
• Smart Toy listens for responses up to 2 feet (61 cm) away!
• Smart Toy responds when tossed in the air.