FitLinxx A Bluetooth Activity Sensor User Manual
FitLinxx Bluetooth Activity Sensor
User Manual.pdf
Pebble Display
To show your daily progress anytime
Quickly tap the Pebble 5 times
with the pads of your ngers
Sequence of lights
Activity Status Sync Status
50% of your
goal achieved
Minimal progress
toward your goal
Pulsing = at least
5 minutes of
data stored
Solid = recent
successful
data sync
Wearing Your Pebble
Running, indoor biking and elliptical
Note: Pebble must be secure
Syncing Pebble Data
The Pebble will sync data when it is
“awake” and near a wireless SyncPoint
To wake the Pebble and sync activity data
Walk near a SyncPoint
Quickly tap the Pebble 5
times with the pads of your
ngers near a SyncPoint
OR
Replacing Your Battery
1.
4.
3.
5.
2.
CR 2032
+
CR 2032
+
CR 2032
+
CR 2032
+
Turn the clip
counterclockwise
Remove the
battery door
Use tool or device clip to
remove the old battery
Wait 60 seconds
Insert the new
battery under tab
Replace the
battery door
Turn clockwise
For more information regarding use, care, or servicing, please contact:
FitLinxx, Inc.
3 Enterprise Drive
Suite 401
Shelton, CT 06484
United States of America
Email: helpdesk@tlinxx.com
Use of this product is subject to the FitLinxx End User License Agreement (EULA): http://www.tlinxx.net/terms.htm
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operations. Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the devices.
Patent information can be found at http://www.tlinxx.net/patents.htm.
European Wireless EU Declaration of Conformity: This wireless device complies with the specications EN 300 440-2, EN 301-489,
and EN 60950 following the provisions of the R&TTE Directive.
Warning: Risk of explosion if battery is replaced by an incorrect type. Please dispose of used batteries in accordance with your
local environmental laws and guidelines.
Specications subject to change without notice.
© 2013 FitLinxx. All rights reserved. FitLinxx, the Fitlinxx logo, and Pebble are trademarks of FitLinxx, Inc.
Pebble and FitLinxx Quick Reference Guide
Working properly
Not working properly
100%
Step 1: Install FitLinxx Connect
• Go to www.tlinxx.com/start
to download the FitLinxx Connect
installer
• Follow the on-screen instructions
to set up FitLinxx Connect and add
your devices
• Validate the SyncPoint connection
status in the system tray or Mac Dock
Step 2: Clip your Pebble on and go!
• Clip the Pebble on your shoe for
best accuracy, or your waistband,
belt, pocket or bra for good
accuracy
• Walk within range of a working
Personal SyncPoint to sync
your data
• Tap the Pebble quickly 5
times to activate the display
Scan to see Pebble videos:
Before you begin:
You must set up a FitLinxx
account at your tness facility
AND register on the FitLinxx
member website before
installing FitLinxx Connect.
Please see your facility sta
for more information on
getting set up on FitLinxx.
Here is what you will need
to continue:
A Pebble® activity tracker
A Personal SyncPoint
Your FitLinxx online
username and password