FitLinxx AL Actilink USB Bridge User Manual operational manual

FitLinxx Actilink USB Bridge operational manual

operational manual

© FitSense Technology 2006/2007
The ActiLink PersonalTM
Step 1: Logon to www.actihealth.com.
Step 2: Download the ActiLink Software: Go to the tab marked downloads and click Download ActiLink Software. This will automatically begin the
download process. At the end of the process you will have the icon in your system tray.
Step 3: Plug the ActiLinkTM into an available USB port.
ActiLink Software
The installation of the ActiLink software will put an ActiHealth icon in your notification bar (system tray). This is typically located on the bottom right
hand corner of your Windows Task Bar. See picture below:
With this icon you can click on and it will open your web browser and automatically take you to www.actihealth.com. (If you have previously logged
in an used the remember me check box, this will take you right to your dashboard!)
You can also right click on to get to a list of maintenance options. When the icon is yellow, this indicates there is no Internet connection.
When the icon is white with red, this indicates there is no ActiLinkTM plugged in to your USB.
Disclaimer
The ActiLinkTM is not a medical device. This device is provided for feedback on exercise and routine activity only. FitSense
recommends that you consult a physician before beginning any exercise program or performing strenuous activity.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the
equipment.
Regulatory Information
FCC ID: O9DAP
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Patents
The ActiLinkTM is covered in whole or in part by patents pending.
Specs
USB 1.0/2.0
Battery: N/A
Dimensions: .2.35 x .675” or .3”
Weight: 8 grams
Water Resistant: N/A
Operating Temperature:14F to 104F
Storage Temperature: -4 to 122F
Transmission Distance: Up to 30 ft
Radio Frequency: 2.428Ghz
Compliance: FCC
Limited Warranty
The ActiLinkTM is warranted against defects in material and workmanship for one year after purchase. Defective products will be repaired or replaced.
The warranty does not cover normal wear, damage, loss or commercial use. The warranty is void if the unit is disassembled by anyone other than a
FitSense Authorized Technician.
For any warranty claims please contact your plan administrator.
THE FORGOING IS YOUR SOLE REMEDY UNDER THIS LIMITED WARRANTY. IN NO EVENT WILL FITSENSE TECHNOLOGY INC. BE LIABLE
FOR ANY INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF ABILITY TO USE THE PRODUCT EVEN IF
FITSENSE HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES.
This warranty gives you specific legal rights and you man also have other rights which vary from state to state.

Navigation menu