FitLinxx CS Wireless Digital Scale User Manual Exhibit D Users Manual per 2 1033 b3

FitLinxx Wireless Digital Scale Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

YES! NO!
The ActiPed™, the ActiLink™, and the ActiScale™ automatically work together to give you and your health care
provider a complete record of your activity and weight to help you stay on track to achieve your program goals. The
devices communicate wirelessly through your computer to a secure website that keeps you connected to your health
care provider. Please follow the steps below for setting up each device.
how to get started
setting up the devices
The ActiPed™ The ActiLink™ The ActiScale™
Step 1: Put on the ActiPed
Remove from package—the ActiPed is a small, black device (about the
size of a stack of quarters). Clip the ActiPed onto footwear of choice.
The unique clip allows for quick and easy placement of the ActiPed on
different pairs of shoes.
Wearing the ActiPed
l The ActiPed must be attached to footwear. (i.e. ActiPed cannot be
put on belts, handbags, watches, headwear, etc.)
l The ActiPed must be:
l TOP-MOUNTED (not on the side of the footwear or at angle)
l FLAT against the shoe
l SNUG (the device should not move freely on the shoe)
l If using lace shoes: place clip under as many laces as possible and
towards the lower portion of your footwear. We recommend at least
two points where the laces cross for best results
l For non-lacing shoes: mount the clip with the open end pointing
down towards the toe
Step 3: Setting up the ActiScale
Remove all packaging and place the scale on a hard and even surface for
accurate results.
l Place the scale within 100 feet of the computer where the ActiLink
is installed
l Quickly and firmly tap the center of the scale platform with your
foot to activate the digital display
l When “0.0” appears in display window, step onto scale. Do not
step onto scale until “0.0” appears in window
l Stand on platform without shifting or moving until weight is
displayed (4 - 5 seconds)
l Step off the scale. After stepping off the scale, the weight reading
will remain on the display for approximately 10 seconds indicating
that it has been captured. If your weight reading does not remain on
the scale display for 10 seconds after you step off, step back on the
scale and wait for the reading to lock in
Using the ActiScale
l Do not use on carpet
l Make sure your scale is set to measure in “lb” (kg/st/lb switch on
back of scale should be set to “lb”)
l Place the scale on a flat surface for accurate operation and safety
l The scale is designed to work in most households where the scale
and computer are in different rooms or on different floors. The scale
can be placed up to 100 feet from your computer. The distance
will vary depending on the number of walls, ceilings, and floors
between the scale and the ActiLink
l Maximize your range by keeping as much unobstructed space as
possible between the ActiLink and the scale. For best results, avoid
metal objects between the scale and ActiLink. Install the ActiLink in
a USB port that is free of obstacles such as cables, metal objects,
power strips, etc. If your USB port is in a confined area with lots of
interference, you may want to purchase a USB extension cable
Please Note:
Digital display automatically turns off after several seconds.
Step 2: Connect the ActiLink to your computer
Remove the ActiLink from package – the ActiLink is a small, black stick
about 2.5” long.
l Plug the ActiLink into the USB port on your computer
l In a web browser, type in the web address provided in your
welcome email and follow the instructions to safely download the
client software. The installation of files will not harm your computer
and should take no longer than 3 minutes
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause undesired operations. Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the devices.

Navigation menu