Fitcare Electronics HW330 Fitness Wristband User Manual

Shenzhen Fitcare Electronics Co., Ltd Fitness Wristband

User Manual

User ManualHeart Rate Wristband Version: V1.01 Components7 Disclaimer6 Specification12 3 4 57 8 9 10 11 12Main Device Display Pannel2 Points Touch SensorUSB Charging Cable User ManualStrap材料：105克 铜版纸单色颜色：单色双面印刷?QQ Skype WhatsApp √ ×2˝- 3˝100 mm70 mmHW330 中英文使用手册切线：折线:Uawe ManualHeart Rate Wristband / HW330 Version: Jul, 2016User ManualHeart Rate Wristband / HW330 Version: Jul, 201624Find “Moofit” from the App store or scan the following QR code to install the App.● OperationHold the screen to check the messages, slide left / right to switch the pages.● OperationWhen using the training function, please:* Make the sensor on the back cover of the wristband stay firmly with the skin.* Wear the watch 2˝- 3˝ above—not on—your wrist bone; wear it higher on the forearm when using this watch as a heart rate monitor, especially if you have a small wrist.* Touch and hold the screen to enter Training Mode, and open “Training” at the App before the training, when the training is completed, the App will store the training data automatically. (Meanwhile, touch and hold the screen to finish training function in the device).* When not using the “training” in the App, the training mode is also available, slide to check the heart rate, training time, steps, calories, touch and hold the screen to complete the training, the training record will not be saved.● OperationHold the screen to enter application center, slide to check the applications. Touch the screen to open the application, hold the screen to exit the application center.3. Application Center(the following functions need to connect with the App) 4. Training(The following function need to be connected with App)5. Other functionOpen the App, register and log in. Enter device center-add new device -search device. Select “HW330” , then a pairing code will appear in the display, enter this code to the App to start pairing. 3After succeed, you may sync the data by pulling down the page. The App will automatically sync the data.Device management: Enter personal center by touching the icon “ “. In the sub-menu of device management, you may check the current paired device, or delete paired device by sliding to the left and select “delete” ,for Androids, hold the device name to delete. ● Slide on the screen to wake up the display, slide to switch between timing, message, application, training mode, calories, steps. The device will automatically enter power saving mode if no operation within 10 seconds, then the display will be off.Slide: SwitchHold: Enter / Exitapplication centerTouch: Open applicationWireless: Bluetooth >=10mDisplay: OLED resolution 128*32Battery Life: 7 days (2 hours training mode everyday)Sensor: 3 axis g-sensor, optical heart rate sensorTouch Sensor: 2 points touch sensorReminder Type: ViberationCharging: 5V charging cableTurn on the Bluetooth: Setup - Bluetooth - Turn on the BluetoothFirst Time Connection1Do not try to find or pair with the device on this page.3 Download the App 3.1 Connect to the App 4 Buttons and DisplayMeStepsSyncing data....Device ManagementMy DeviceHW385 DeletePair PairSucceedHW330-88SetupBluetooth onLandscape Display(Touch to rotate)Training TimeCalories StepsHeart RatePortrait Display(Touch to rotate)4.1 Functions and operations628/06?2. Messages(the following functions need to connect with the App)1. Main Page(The time will be automatically updatedwhen sync with the App)TimeMessage NumberDateBatterypercentageBluetooth connected /not connected /●The product described is subject to change without prior notice, due to the manufacturer's continuous development program.●Our company makes no representations or warranties with respect to this manual or with respect to the products described herein.●Our company shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.Find the phone (the phone will ring)Remote Camara (the phone needto open the camerafunction)Music Control(the phone need toopen the music App)Wechat Mail MissedCallsOtherMessages" " Incoming Calls Reminder " " Alarm.(Set in the sleep part in the App: Awake time=Alarm viberation reminder)" " Drink Reminder. (Open / close in the App)" " Other Reminder. (Open / close in the App)" " Break Reminder. (Open / close in the App)" " " " steps, calories, this is the data for the intraday (the data uploaded to the clouds when connect to the App).Raising up and rotate your wrist to turn on the display使用手册心率运动手环 版本： V1.01 手环部件 3 下载App1 2 3 4 5 67 8 9 10 11 124 按键及显示主机 腕带USB充电线 使用手册显示区 ● 在黑屏状态 " 滑动屏幕 " 亮屏，再次 " 滑动 " 依次显示时间、信息、应用中心、训练、卡路里、步数。超过10 秒无操作，手环自动进入省电状态，屏幕不再显示。" "步数," "卡路里,实时显示当天数据（与APP 连接后，数据自动同步到 App 在云端保存）。" "来电震动提醒。 ( 需要接 App 使用 )" " 喝水震动提醒，（需在 App 中设置 / 开启）。" " 久坐震动提醒，（需在 App 中设置 / 开启）。" " 计划震动提醒，（需在 App 中设置 / 开启）" " 闹钟提醒。 （在 App 睡眠参数设置：起床时间 = 闹钟震动提醒）?远程照相( 手机需先开启相机 )横屏显示( 单点屏幕切换竖屏 )竖屏显示( 单点屏幕切换横屏 )音乐播放与暂停( 手机需先开启音乐 App)查找手机( 手机发出铃声 )从App商店搜索"MooFit"下载,或者扫描以下二维码安装App。3.1 连接App 进入App 会自动同步数据，也可以手动下拉屏幕刷新同步数据，(手环时间同时也同步）。 3步数正在同步数据.......设备管理： 在App底部，点" "，进入个人中心，在例表中找到 "设备管理 "，可查看当前已连接的设备，左划已连接的设备可删除当前设备(安卓手机长按删除），点击 "添加设备" 搜索添加新设备。4设备管理我的设备HW330 删除我的QQ 微信 Skype WhatsApp 邮件 未接来电 其它消息抬手翻腕，即可亮屏打开手机蓝牙： 设置--蓝牙--打开蓝牙。第一次连接App不要尝试在本页面寻找设备或配对。1打开App,注册填写资料,完成后，进入绑定设备页面，在搜索例表中点击 "HW330"输入手环显示的配对码进行配对。绑定设备 绑定设备2HW330-886 技术说明7 责任声明无线通信： 蓝牙 4.0 距离≥10m显示： OLED 分辨率 128*32电池： 7 天 （每天使用训练模式 2 小时）传感器： 3 轴加速度传感器， 光学心率传感器按键： 2 点触摸按键提醒：提醒振动充电： 5V 专用 USB 充电线●本手册所载资料仅供参考。所述产品可能会因为生产商的持续研发计划而有所变动，毋需事先做出通告。● 本公司一概不就本手册或其所述产品作出任何声明与保证。● 本公司一概不对使用本手册与其所述产品所产生的或与其相关的直接或间接、意外或特殊的损害、损失与费用承担任何法律责任。使用手册心率运动手环/HW330 版本： 2016年7月3. 应用中心 ( 以下功能需要连接 App 使用 ) 4. 训练 ( 以下功能需要接 App 使用 )5. 其它功能4.1 符号功能及操作说明28/06时间显示 蓝牙 连接 / 未连接日期信息数量电量?1. 主页（与 App 同步时自动更新手环时间）2. 信息 ( 以下功能需连接 App 使用 )●操作说明长按屏幕查看信息内容，左右滑动屏幕翻页查看。支持社交类 App 消息震动显示提醒，可在 APP" " 页面例表中找到 " 设备提醒管理 "设置开启 / 关闭。，●操作说明长按屏幕进入手环应用中 ，左右滑动屏幕切换应用 , 单点 屏幕开启应用，长按屏幕退出应用中心。●操作说明使用本品的训练功能时，请注意：a. 手表需紧贴皮肤，使手表背壳的光传感器和皮肤之间接触良好。b. 手表戴在手腕背上的关节后面距离腕骨上方 2˝- 3˝处（ 不能戴在关节上），如果你的手腕很细，将手表戴在位置更高，手臂更粗的位置。（当不使用训练功能时，本品可以像其它款式的手表一样佩戴。）c. 长按屏幕，进入训练模式 ，同时开启 APP " " 页面开始训练。训练结速后，App 自动保存训练记录。（同时需要长按手环屏幕结束训练功能）d. 手环训练在不使用 APP " " 的情况下，也可以用训练功能，训练时滑动屏幕可显示、心率、训练时间、步数、卡路里、（ 长按屏幕结束训练），训练记录不会被保存， √ ×2˝- 3˝2点触摸滑动： 切换页面长按： 进入应用/退出应用单点： 开启应用训练时间卡路里 步数心率100 mm70 mm训练训练我的正面背面5 FAQ1. Open the Bluetooth setting in the phone, select paired device setting to turn on “Input device “ option. (see below picture)2. If the phone doesn’ t have “Input device” option, delete the pairing of the device and smart phone, and pair the device again, then turn on “Input device” option. Please be aware that you need to delete the pairing and pair again in the App.The Remote Camera/ Music Control function not work in Android?BluetoothPaired device(s)Enter Setting Turn On the OptionHW330ConnectedPaired device(s)Configuration itemsInput device5 常见问题 1. 请打开手机上的蓝牙设置，选中以配对的 HW330 的设置开启“输入设备”选项。（见下图）2. 如没有“输入设备”选项的，先取消 HW330 与手机的配对，在重新配对，然后开启“输入设备”选项。注意， App 上也要删除绑定在重新绑定一次。蓝牙已配对设备进入设置 开启选项HW330以连接已配对设备配置项输入设备远程拍照 / 音乐播放功能在安卓系统上无反应时？主机从腕带中取出;1USB 充电线对着主机侧边有金属触点的一面，插进去 ;22 如何充电使用交流电源适配器或电脑上的 USB 接口为其充电。3The host is removed from the wristband;1USB charging line facing the side of the host side of the metal contacts, inserted into;22 How to chargeUse the AC adapter or the USB port on your computer to charge it.31313电源适配器 电脑Power adapter Computer
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu