Fleetwood Group BGEN2-EI Gen2 Base Transceiver User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	656395
Application ID	LDppep7o6X+0QjvPxJ6Ntw==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.76kB (184528 bits)
Date Submitted	2006-05-10 00:00:00
Date Available	2006-05-10 00:00:00
Creation Date	2006-04-04 14:41:33
Producing Software	602Pro PRINT PACK 2002
Document Lastmod	0000-00-00 00:00:00
Document Title	Exhibit D Users Manual per 2 1033 b3

elnstruction cpsRF® GEN2 Response System
User Manual
Model BGEN2EI Base and KGEN2EI Keypad
Frequency 2.4 GHz
The elnstruction cpsRF Model KGEN2EI keypad is a wireless portable device that along with a
base unit Model, BGEN2EI, makes it possible for a number of people to participate
interactively in either a small or large group situation. The product accomplishes this by
sending keypad switch closure information from the keypad to the base unit employing a
wireless transceiver to receive the keypad signal. These signals are processed by the base
unit and delivered to a host computer which allows the responses to be stored, analyzed and if
desired displayed on a video projector for feedback to the group showing the results of their
participation.
The cpsRF GEN2 keypad is housed in a white and blue plastic enclosure similar in
appearance to a small TV remote control device. It is powered by 2 AA battery cells,
eliminating external wires or connections. The keypad uses a membrane switch panel for
numeric entry and utilizes an LCD for entry and base receipt confirmation indicators for the
user.
The system operates on the 2.4 GHz frequency band using frequency hopping spread
spectrum. In Canada, to prevent radio interference to any licensed service sharing this band,
this device is intended to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
“Operation is subject to thefollowing two conditions: (1) this devtce may not cause
interference and (2) this device must accept any interference, including interference that
may cause undesired operation ofthe device. ”
System Setup
1. Unpack the cpsRF base unit and set it on a table or available surface in the vicinity of
where the cpsRF keypads will be used.
2. Plug the USB DC power/data cable into an available USB port on a PC; plug the other end
into the USB port on the cpsRF base.
3. Open the carrying case containing the response keypads and distribute them to the
participants.
4. Turn on the computer and start the application software to control the base unit to poll for
keypad responses. The application software will have its own instructions for using the
system.
Operation
1. Instruct the participants on the usage of the response keypads and procedure for
responding.
Fleetwood Group Inc. FCC ID. FBRLCB‘IDD-EI IC 1859A-HEBEI Pagei of2
File Name. EINB_GEN2_ManuaI.doc Date. 4/4/2006
2. Ask a question and/or send prompts from the base unit for keypad LCD display and allow
enough time (at least 10 seconds) for all participants to respond. A self paced testing
mode is also available.
3. Observe the results on the screen and optionally save the results for later analysis if
desired.
Proceed and repeat the process for the next question.
Continue until all questions are completed.
Analyze the responses for the period and run printouts if desired.
P’P‘P
System Shutdown
Turn off the power to the computer.
Unplug the USB cable from the computer and store it in its carrying case.
Store the cpsRF base in the carrying case.
Collect the cpsRF keypads and return them to the carrying case.
The system is now ready for transporting.
53:59'7N‘
Notice
The base unit and keypads may be susceptible to Electrostatic Discharge (ESD) and
other similar fast transient events causing system interruption. Should system
interruption occur, reboot computer, reset base unit by disconnecting and reconnecting
USB cable and press and hold the join key on non-functioning keypads. Rejoin
keypad if necessary.
Fieetwood Group inc. FCC ID. FBRLCB‘lDD-Ei IC 1859A-HEBEI Page 2 of 2
File Name. EINB_GEN2_ManuaI.doc Date. 4/4/2006

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : 
Create Date                     : 2006:04:04 14:41:33
Producer                        : 602Pro PRINT PACK 2002
Author                          : 
Title                           : 
Subject                         : 
Page Count                      : 2

EXIF Metadata provided by EXIF.tools