Fleetwood Group E240D Low Power RF Module User Manual CERTIFICATE OF COMPLIANCE

Fleetwood Group Inc Low Power RF Module CERTIFICATE OF COMPLIANCE

User Manual

Rhein Tech Laboratories, Inc. Client:  Fleetwood Group, Inc. 360 Herndon Parkway Model:  E240D Suite 1400 Standards:  FCC 15.249/IC RSS-210 Herndon, VA 20170 ID’s:  FBRE240D/1859A-E240D http://www.rheintech.com Report #:  2012236     Page 35 of 50 Appendix M:  Manual  Please refer to the following pages.
                    USER MANUAL  E240D RF Module
     ii            Copyright 2007 Fleetwood Group, Inc., Electronics Division.  All rights reserved.  Licensed software products are owned by Fleetwood Group, Inc. or its suppliers and are protected by United States copyright laws and international treaty provisions.  Fleetwood Group, Inc. products are covered by U.S. and foreign patents, issued and pending.  Information in this publication supersedes that in all previously published material.  Specifications and pricing are subject to change without notice.  Printed in the U.S.A.  Fleetwood Group, Inc. Electronics Division 11832 James St. Holland, Michigan  49424  www.fleetwoodgroup.com www.replysystems.com  Sales:  1-800-257-6390 Technical Service:  1-888-GO-REPLY (467-3759)   Reply® is a registered trademark of Fleetwood Group, Inc. Other trademarks contained herein are the property of their respective holders.   Revision History:  Rev Date Description A 12/19/2012 Original
       iii Table of Contents  1.0 E240D RF MODULE ............................................................................................................................................ 4 1.1 DESCRIPTION ....................................................................................................................................................... 4 1.2 FCC, IC COMPLIANCE INFORMATION .................................................................................................................. 4 1.3 STANDARDS AND GUIDELINES ............................................................................................................................. 4 1.4 FCC/IC COMPLIANCE .......................................................................................................................................... 5
     iv  1.0 E240D RF Module 1.1 Description The E240D is a low power wireless response keypad module.  The E240D module is used to interact with an audience so they can provide real time feed back to questions.  It communicates at 2.4GHz, GFSK to a base station.    The overall operation of the E240D module is controlled by a microcontroller.  This microcontroller is powered from approximately 3V and uses an internal reference.  The microcontroller handles control of the RF communications and keypad inputs.   RF communications uses a 2.4 GHz transceiver.  The transceiver chip uses a 16 MHz reference oscillator for TX/RX and is also powered by 3V.  The transceiver uses an integral inverted F antenna on the PCB.      1.2 FCC, IC Compliance Information  E240D RF Module Responsible Party Pertaining to the Declaration of Conformity    Fleetwood Group, Inc.   11832 James Street   Holland, MI  49424   Attn: Product Service Coordinator   Phone: 888-467-3759     1.3 Standards and Guidelines This device complies with the following USA/Canada Regulations:  The USA Federal Communications Commission (FCC) Rules and Regulations  Industry Canada Rules and Regulations  This device complies with the following national and international standards:   FCC  Part  15.249  (10-01-11):  Operation  within  the  bands  902-928  MHz,  2400-2483.5 MHz,  5725-5875 MHz, and 24.0-24.25 GHz.  IC RSS-210 Issue 8: Low power license-exempt radio-communications devices (all frequency bands): Category 1 equipment.
       5  1.4 FCC/IC Compliance Changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device.   This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).   Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device  must accept any interference, including interference that may cause undesired operation of the device.    Le présent appareil est conforme aux la Partie 15 des règlements de la FCC et CNR d'Industrie Canada  applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:  (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu