Fleetwood Group IQK1000-9SS Reply IQ Keypad Transceiver User Manual IQK1000 Manual

Download:
Mirror Download [FCC.gov]
Document ID	327526
Application ID	ONIOhFkOQQrtsj56v0jpbg==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.87kB (110848 bits)
Date Submitted	2003-05-23 00:00:00
Date Available	2003-05-21 00:00:00
Creation Date	2003-04-22 18:23:34
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-04-22 18:23:34
Document Title	Microsoft Word - IQK1000_Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	harryd2k

Reply IQ User Manual
System Setup
1. Unpack the Reply IQB500 base unit and set it on a table or available surface in the
vicinity of where the Reply IQK1000 Response Keypads will be used.
2. Plug the AC power module into the Reply IQ base DC input jack.
3. Plug the AC line cord from the power module into a 115 VAC power circuit.
4. Turn on the power switch of the Reply IQ base unit.
5. Plug either the RJ45 supplied cable into a network port, if Ethernet connection
selected (or directly to a PC via a crossover cable), or a standard DB9 to DB9 RS232
cable into a COM port (usually Com1 or Com2) if serial connection selected.
6. Open the carrying case containing the response keypads and distribute them to the
participants.
7. Turn on the computer and start the application software to control the base unit to
poll for keypad responses. Each application software will have its own instructions for
using the system.
Operation
1. Instruct the participants on the usage of the response keypads and procedure for
responding.
2. Ask a question and allow enough time (at least 10 seconds) for all participants to
respond.
3. Observe the results on the screen and optionally save the results for later analysis if
desired.
4. Proceed and repeat the process for the next question.
5. Continue until all questions are completed.
6. Analyze the responses for the period and run printouts if desired.
System Shutdown
1.
2.
3.
4.
5.
6.
7.
Turn off the power to the computer.
Turn off the power to the Reply IQ base unit.
Unplug the data cable from the computer and store it in its carrying case.
Unplug the AC line cord from the power module and store both in the carrying case.
Store the Reply IQ in its carrying case.
Collect the keypads and return them to their carrying case.
The system is now ready for transporting.
Fleetwood Group Inc.
File Name: IQK1000_Manual
FCC ID: FBRIQK1000-9SS
User Manual
Page 1 of 3
Date: 4/22/2003
Reply IQ Keypad Operation
The reply IQ keypad has 5 basic modes of operation: Single-Digit Entry, Multi-Digit
Entry, Moment to Moment Entry, Speed Scoring, and the Options menu. From a
power-off state, simply press any key to turn the keypad power on. The REPLY IQ Logo
along with the keypad’s address and channel will be displayed briefly and then the
keypad will enter normal operation in the mode most recently used.
Single Digit Entry Mode
In this mode, only one key press can be sent at a time. Simply press one of the numeric
keys (0-9), and the number will be displayed in the center of the screen. The key shown
on the screen will be sent to the base during the next polling interval. When the number
clears from the screen, the base has successfully received the data.
Multi Digit Entry Mode
In Multi Digit mode, the user can send a response up to 16 characters. When the base
is polling, data is sent from the keypad every time a new key is pressed. There is a
maximum of 16 characters that can be sent. If the SEND key is pressed when 15
characters or less have been entered, the display will get “grayed” out and all further
keypresses will be locked out except “C” and “Í“. When the base confirms that it got
the data, the entry will be cleared, and data entry will begin again.
Moment to Moment Entry Mode
Moment to Moment mode allows the user to record their opinion of a certain event in the
form of Very bad, bad, indifferent, good, or excellent”. In this mode a “ -- - 0 + ++”
appears just above the 5 softkeys. Now press the key that corresponds to the desired
opinion, and the display will be highlighted above the softkey to indicate a keypress
happened. Information on when the key was pressed, and what value was entered gets
stored in a buffer and sent to the base on the next polling interval.
The keypad is able to store up to 128 different keypresses without ever hearing a polling
command from the base station. However, since opinion based data can be entered
quickly, measures must be taken to prevent this 128 entry buffer from filling up
completely. The base can set the keypad to several different “resolution” settings to
prevent too much data from being stored. If multiple keys are pressed during the set
resolution time, the keypresses are averaged into one response. Using a ¼ second
resolution will provide the greatest accuracy, but also generates the most data from a
keypad. This should only be used with small groups of keypads. Resolutions of up to
10 seconds are reserved for very large numbers of keypads, where the time between
polling messages is longer.
Speed Scoring Mode
Speed scoring mode operates similar to multi digit mode with the exception of a timestamped response. The group being polled will attempt to answer a question at the
same time. Based on the time-stamped responses from each keypad, it is possible to
determine which keypad was pressed first down to the nearest 1/20 second.
Speed Scoring is set up by the base station. Unlike Multi Digit mode, the maximum
number of characters is selectable from 1-16. There is also the option of whether to
Fleetwood Group Inc.
File Name: IQK1000_Manual
FCC ID: FBRIQK1000-9SS
User Manual
Page 2 of 3
Date: 4/22/2003
record the time stamp on either the last key pressed or time stamp on the SEND key
only.
Options Menu
To access the Reply IQ keypad configuration menu, press “Í” and “1” at the same time
when the keypad is any of the modes listed above. The following menu will appear:
___________________________
|OPTIONS
| ________ _________ |
||1:Single||5:Address||
||2:Multi ||6:Channel||
||3:Moment||7:POWER ||
||4:Speed ||Send:Exit||
| -------- --------- |
|_____________________|
The menu keys perform the following functions:
KEYS 1-4: Manually switch the keypads into Single, Multi, Speedscoring, or Moment to
moment entry modes. Any special options such as maximum number of characters will
have to be set by the base.
KEY 5: Set the keypad address. Another screen will appear asking you to enter the new
keypad number. Enter a number from 1 to 1500 followed by the SEND key. If a 4 digit
number (ex: 1500) is entered, the address will be updated automatically without
pressing the SEND key.
KEY 6: Use the 1 and 3 keys to lower and raise the channel number. When the channel
you want is displayed, press 0 to restart the keypad on the new channel.
KEY 7: Completely turn off the power to the keypad. When the keypad is off, press any
key to turn the keypad on again.
SEND KEY: Exit back to regular operation mode.
Fleetwood Group Inc.
File Name: IQK1000_Manual
FCC ID: FBRIQK1000-9SS
User Manual
Page 3 of 3
Date: 4/22/2003

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:04:22 18:23:34-04:00
Modify Date                     : 2003:04:22 18:23:34-04:00
Page Count                      : 3
Creation Date                   : 2003:04:22 22:23:34Z
Mod Date                        : 2003:04:22 22:23:34Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : harryd2k
Metadata Date                   : 2003:04:22 22:23:34Z
Creator                         : harryd2k
Title                           : Microsoft Word - IQK1000_Manual.doc

EXIF Metadata provided by EXIF.tools