Fleetwood Group N240D Low Power RF Transceiver Module User Manual CERTIFICATE OF COMPLIANCE

Download:
Mirror Download [FCC.gov]
Document ID	866966
Application ID	xGyFyjwR7p10HsQOlYo9KQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.3kB (203734 bits)
Date Submitted	2007-11-09 00:00:00
Date Available	2007-11-12 00:00:00
Creation Date	2007-11-05 15:46:04
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-11-05 15:46:26
Document Title	CERTIFICATE OF COMPLIANCE
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	Systems Administrator

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix L:
Client:
Model:
Standards:
FCC/IC ID:
Report #:
Fleetwood Group, Inc.
N240D
FCC 15.247/IC RSS-210
FBRN240D/1859A-N240D
2007270
Manual
Please refer to the following pages.
Page 41 of 45
USER MANUAL
N240D RF Module
©Copyright 2007 Fleetwood Group, Inc., Electronics Division. All rights reserved. Licensed software products are
owned by Fleetwood Group, Inc. or its suppliers and are protected by United States copyright laws and international
treaty provisions.
Fleetwood Group, Inc. products are covered by U.S. and foreign patents, issued and pending. Information in this
publication supersedes that in all previously published material. Specifications and pricing are subject to change
without notice.
Printed in the U.S.A.
Fleetwood Group, Inc.
Electronics Division
11832 James St.
Holland, Michigan 49424
www.fleetwoodgroup.com
www.replysystems.com
Sales: 1-800-257-6390
Technical Service: 1-888-GO-REPLY (467-3759)
Reply® is a registered trademark of Fleetwood Group, Inc.
Other trademarks contained herein are the property of their respective holders.
Revision History:
ii
Rev
Date
Description
10/31/2007
Original
11/01/2007
Updated EN test standards
Table of Contents
1.0 N240D RF MODULE ........................................................................................................................................... 4
1.1 DESCRIPTION ....................................................................................................................................................... 4
1.2 KEYPAD BATTERY REPLACEMENT ....................................................................................................................... 4
1.3 FCC, IC, AND EU COMPLIANCE INFORMATION ................................................................................................... 4
1.4 STANDARDS AND GUIDELINES ............................................................................................................................. 4
1.5 FCC/IC COMPLIANCE .......................................................................................................................................... 5
1.6 EU COMPLIANCE ................................................................................................................................................. 5
1.7 EXPLANATION OF EU RESTRICTIONS ................................................................................................................... 5
1.8 TECHNICAL SPECIFICATIONS................................................................................................................................ 6
iii
1.0 N240D RF Module
1.1 Description
The N240D is a low power wireless response keypad module. It has 14 available inputs, and two available outputs.
The N240D module is used to interact with an audience so they can provide real time feed back to questions. It
communicates at 2.4GHz, GFSK to a base station. The base unit polls keypads, and displays result.
The overall operation of the N240D module is controlled by a microcontroller. This microcontroller is powered
from approximately 3V and uses a 16 MHz reference. The microcontroller handles control of the RF
communications and keypad inputs.
RF communications use the Nordic 2401A 2.4 GHz transceiver. The Nordic chip uses a 16 MHz reference
oscillator that is shared with the microcontroller for TX/RX and is also powered by 3V. The Nordic transceiver uses
an integral PCB inverted F antenna with a gain of approximately 3.6 dBi.
1.2 Keypad Battery Replacement
Each keypad is powered from a single CR2032 Lithium Coin cell battery. The battery is replaceable. To replace
battery, slide out the old battery from its holder, and replace with a new battery noting its polarity. The negative
side of the battery should be facing the PCB.
1.3 FCC, IC, and EU Compliance Information
N240D RF Module
Responsible Party Pertaining to the Declaration of Conformity
Fleetwood Group, Inc.
11832 James Street
Holland, MI 49424
Attn: Product Service Coordinator
Phone: 888-467-3759
1.4 Standards and Guidelines
This device complies with the following European Directives and USA/Canada Regulations:
¾ Directive 1999/5/EC on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity
¾ Directive 2006/95/EC on the harmonization of laws of member states related to electrical equipment
designed for use within certain voltage limits
¾ The USA Federal Communications Commission (FCC) Rules and Regulations
¾ Industry Canada Rules and Regulations
This device complies with the following national and international standards:
¾ EN 301 489-1 V1.6.1: 2005: EMR; EMC standard for radio equipment and services. Part 1: Common
technical requirements.
¾ EN 301 489-3 V1.4.1
¾ EN 300 440-2 V1.1.2
¾ EN 301 489-17 V1.2.1: 2002: EMR; EMC standard for radio equipment and services. Part 17: Specific
conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
¾ EN 300 328 V1.7.1: Electromagnetic compatibility and Radio spectrum Matters (ERM);Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide
band modulation techniques.
¾ EN 60950-1: 2006: Safety of Information Technology Equipment
¾ FCC Part 15B, 15.247: 10-01-2006: Radio Frequency devices: Operation within the bands 902-928 MHz,
2400-2483.5 MHz, and 5725-5850 MHz.
¾
¾
FCC Part 15.249: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, 5725-5875 MHz, and
24.0-24.25 GHz.
IC RSS-210 Issue 7: 2007: Low power license-except radio-communications devices (all frequency
bands): Category 1 equipment.
1.5 FCC/IC Compliance
This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept
any interference, including interference that may cause undesired operation of the device. The user is cautioned that
changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to
operate the device.
1.6 EU Compliance
This device is a 2.4 GHz low power response system controller intended for residential and commercial use in all
EU and EFTA member states except in Bulgaria, France, Italy, Luxembourg, Norway and Romania where restrictive
use applies. See table below for explanation of restrictions.
1.7 Explanation of EU Restrictions
Country:
Bulgaria
France
Italy
Luxembourg
Norway
Romania
Restriction:
Reason/remark
General authorization required
for outdoor use and public
service.
Outdoor use limited to 10 mW Military Radiolocation and Fixed
E.I.R.P. within the band 2454- Service use
2483.5 MHz. Derogation in
French overseas departments of
Guyane and La Réunion: outdoor
use not allowed in band 24002420 MHz
If used outside of own premises,
general authorization is required.
None
General authorization required
for public service
Implemented
This subsection does not apply
for the geographical area within a
radius of 20 km from the centre
of Ny-Alesund
On a secondary basis. Individual
license required. T/R 22-06 not
implemented
Notice
The module may be susceptible to Electrostatic Discharge (ESD) and other similar fast transient events causing
system interruption. Should system interruption occur, remove and replace battery to reset the module.
This equipment shall only be installed and operated with the antenna types shown in this application with gains not
more than those shown for each of the antennas, respectively, and installed with a minimum of 20 cm of separation
distance between the antenna and all persons during normal operation.
1.8 Technical Specifications
Enclosure
Symbol
Min
Value
Typ
Unit
Max
dl
Length
2.77
in.
dw
Width
1.2
in.
dh
Height (Thickness)
.23
in.
Min
Value
Typ
Max
Symbol
VDD
Op temp
Parameter
Parameter
Supply Voltage
USB
Operating Temperature
2.2
3.3
30
Unit
Deg C

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2007:11:05 15:46:26-07:00
Create Date                     : 2007:11:05 15:46:04-07:00
Metadata Date                   : 2007:11:05 15:46:26-07:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Format                          : application/pdf
Title                           : CERTIFICATE OF COMPLIANCE
Creator                         : Systems Administrator
Document ID                     : uuid:192149e1-0af4-4fb8-8c21-1e6b3e089c68
Instance ID                     : uuid:15c45be0-00fb-418d-ab3b-efe72f4859db
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Has XFA                         : No
Page Count                      : 7
Author                          : Systems Administrator

EXIF Metadata provided by EXIF.tools