Fleetwood Group V2420G Low Power RF Module User Manual CERTIFICATE OF COMPLIANCE

Fleetwood Group Inc Low Power RF Module CERTIFICATE OF COMPLIANCE

User Manual

Rhein Tech Laboratories, Inc. Client: Fleetwood Group, Inc. 360 Herndon Parkway Model: V2420G Suite 1400 Standards: FCC 15.247/IC RSS-210 Herndon, VA 20170 http://www.rheintech.com FCC/IC ID: FBRV2420G/1859A-V2420G Report #: 2010234 Page 74 of 92 Appendix L: Manual Please refer to the following pages.
USER MANUAL V2420G Module
ii Copyright 2007 Fleetwood Group, Inc., Electronics Division. All rights reserved. Licensed software products are owned by Fleetwood Group, Inc. or its suppliers and are protected by United States copyright laws and international treaty provisions. Fleetwood Group, Inc. products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and pricing are subject to change without notice. Printed in the U.S.A. Fleetwood Group, Inc. Electronics Division 11832 James St. Holland, Michigan 49424 www.fleetwoodgroup.com Sales: 1-800-257-6390 Technical Service: 1-888-GO-REPLY (467-3759) Reply® is a registered trademark of Fleetwood Group, Inc. Other trademarks contained herein are the property of their respective holders. Revision History: Rev Date Description A 3/30/2011 Original
iii Table of Contents 1.0 V2420G MODULE................................................................................................................................................ 4 1.1 DESCRIPTION ....................................................................................................................................................... 4 1.2 POWERING THE V2420G ...................................................................................................................................... 4 1.3 FCC AND IC ......................................................................................................................................................... 4 1.4 STANDARDS AND GUIDELINES ............................................................................................................................. 4 1.5 FCC/IC COMPLIANCE .......................................................................................................................................... 5
4 1.0 V2420G Module 1.1 Description The V2420G is a low power real time locating system Gateway. The V2420G module is used to identify the location of an individual or asset location. It communicates at 2.4GHz to a link module. The overall operation of the V2420G module is controlled by a microcontroller. This microcontroller is powered from an internal regulated supply, and uses a 16 MHz reference. The V2420G module can be powered from an external DC power pack, or POE. The microcontroller handles control of the RF communications, indicator LEDs, Ethernet communications (uses a 25 MHz reference), USB communications, an optional LCD display, and button input. RF communications use a 2.4 GHz transceiver, and RF power amplifier. The transceiver chip uses its own 16 MHz reference oscillator for TX/RX, and is powered by an internal linear regulator. The RF power amplifier is also power by an internal linear regulated supply. The transceiver uses an integral antenna on the PCB or an external antenna. 1.2 Powering the V2420G The V2420G can be powered via POE (Power Over Ethernet) or by an external dc power pack. 1.3 FCC and IC V2420G Module Responsible Party Pertaining to the Declaration of Conformity Fleetwood Group, Inc. 11832 James Street Holland, MI 49424 Attn: Product Service Coordinator Phone: 888-467-3759 1.4 Standards and Guidelines This device complies with the following USA/Canada Regulations:  The USA Federal Communications Commission (FCC) Rules and Regulations  Industry Canada Rules and Regulations This device complies with the following national and international standards:  FCC 15.247 (10-01-09)  IC RSS-210 Issue 8
5 1.5 FCC/IC Compliance This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu