Fleetwood Group V2420L Low Power RF Module User Manual CERTIFICATE OF COMPLIANCE
Fleetwood Group Inc Low Power RF Module CERTIFICATE OF COMPLIANCE
User Manual
Rhein Tech Laboratories, Inc.
Client:
Fleetwood Group, Inc.
360 Herndon Parkway
Model:
V2420L
Suite 1400
Standards: FCC 15.247/IC RSS-210
Herndon, VA 20170
http://www.rheintech.com
FCC/IC ID: FBRV2420L/1859A-V2420L
Report #:
2010233
Page 48 of 60
Appendix L: Manual
Please refer to the following pages.
USER MANUAL
V2420L Module
ii
Copyright 2007 Fleetwood Group, Inc., Electronics Division. All rights reserved. Licensed software products are
owned by Fleetwood Group, Inc. or its suppliers and are protected by United States copyright laws and international
treaty provisions.
Fleetwood Group, Inc. products are covered by U.S. and foreign patents, issued and pending. Information in this
publication supersedes that in all previously published material. Specifications and pricing are subject to change
without notice.
Printed in the U.S.A.
Fleetwood Group, Inc.
Electronics Division
11832 James St.
Holland, Michigan 49424
www.fleetwoodgroup.com
Sales: 1-800-257-6390
Technical Service: 1-888-GO-REPLY (467-3759)
Reply® is a registered trademark of Fleetwood Group, Inc.
Other trademarks contained herein are the property of their respective holders.
Revision History:
Rev
Date
Description
A
2/7/2011
Original
iii
Table of Contents
1.0 V2420L MODULE ................................................................................................................................................ 4
1.1 DESCRIPTION ....................................................................................................................................................... 4
1.2 POWERING THE V2420L ...................................................................................................................................... 4
1.3 FCC AND IC ......................................................................................................................................................... 4
1.4 STANDARDS AND GUIDELINES ............................................................................................................................. 4
1.5 FCC/IC COMPLIANCE .......................................................................................................................................... 5
4
1.0 V2420L Module
1.1 Description
The V2420L is a low power real time locating system Link. The V2420L module is used to identify the location of
an individual or asset location. It communicates at 2.4GHz, to a badge module, link module or gateway module.
The overall operation of the V2420L module is controlled by a microcontroller. This microcontroller is powered
from an internally regulated supply, and uses a 16 MHz reference. The V2420L module is powered from AC mains,
and uses an internal AC to 5VDC power module. The microcontroller handles control of the RF communications
and indicator LEDs.
RF communications use a 2.4 GHz transceiver, and RF power amplifier. The transceiver chip uses a 16 MHz
reference oscillator that is shared with the microcontroller for TX/RX, and is also powered by an internally regulated
supply. The RF power amplifier is also power by an internally regulated supply. The transceiver uses an integral
antenna on the PCB.
1.2 Powering the V2420L
The V2420L is powered by the AC mains. To power the module plug the V2420L into an AC receptacle with a
voltage of 100-240Vac and 47-63 Hz.
1.3 FCC and IC
V2420L Module
Responsible Party Pertaining to the Declaration of Conformity
Fleetwood Group, Inc.
11832 James Street
Holland, MI 49424
Attn: Product Service Coordinator
Phone: 888-467-3759
1.4 Standards and Guidelines
This device complies with the following USA/Canada Regulations:
The USA Federal Communications Commission (FCC) Rules and Regulations
Industry Canada Rules and Regulations
This device complies with the following national and international standards:
FCC 15.247 (10-01-09)
IC RSS-210 Issue 8
5
1.5 FCC/IC Compliance
This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. The user is cautioned that changes or
modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.