Flir BelgiumBA LTT Wireless MOB System (tag) User Manual 84196 1

Raymarine UK Ltd. Wireless MOB System (tag) 84196 1

Contents

Registration

1.Do NOT use a sharp object to open the TagDo NOT open a Tag in wet or dirty conditionsPreparing your Tag for useFit BatteryBefore you can use your Tag, you must:Taking care not to disturb other internal components, insert the supplied CR2 3V batteryCR2 3VEnsure correct polarityImportant!2.SnapReplace the Tag back and snap shut3. Use a coin or similar object to open the Tag1. Fit the battery supplied.2. Register the Tag with the LifeTag system on your boat. See overleaf84196_1.fm Page 1 Thursday, March 30, 2006 3:11 PM
Constant RED 1.Alternate RED and GREEN 4.Brief GREEN Flashes2. RED FlashesIMMEDIATELY press and release Tag button, to activate (switch on) the TagWhen you have fitted the Tag battery, bring the Tag near to your LifeTag system Base Station and switch on power to the Base Station.Note: If registration does not start, switch the Base Station off then on again, then repeat steps 2 to 45. When registration is complete, the Tag is operational and ready to be used with your LifeTag system.Check that within the next 15 seconds, registration starts.3.Register TagRegistration must be completed within one minute of switching on power to the Base Unit.ImportantREGISTRATION STARTREGISTRATION COMPLETEPress and release Tag button again.84196_1.fm Page 2 Thursday, March 30, 2006 3:11 PM

Navigation menu