Flow Fabco Air Nfpa Cylinder Catalogue 1505482246 User Manual

Fabco-Air Nfpa Cylinder Catalogue-1505482246 FABCO-AIR_NFPA_CYLINDER_CATALOGUE-1505482246 FABCO-AIR_NFPA_CYLINDER_CATALOGUE-1505482246 FABCO-AIR NFPA CYLINDER CATALOGUE Cylinders s production assets-flotronics

User Manual: Flow Fabco-Air Nfpa Cylinder Catalogue-1505482246

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Catalog NF-6

NFPA Air Cylinders
Now Includes Optional
Oversize rod information

12-10-11

NFPA Cylinders

The dimensional interchange to NFPA Standards

Cylinder Construction
Head and cap are machined from
solid aluminum bar stock and black
anodized for corrosion resistance.

Pressure rating: 250 psi max.
Temperature limits: –10°F to +165°F.

Tie rods are 100,000 psi minimum
yield steel for maximum holding power.
Threads are rolled for durability.

Lubrication is a high performance synthetic grease
with microscopic PTFE particles in suspension.
Cushion has a flush, retained
adjustment needle.

Buna-N Nitrile Seals standard.

Oversized nonmetallic, composite‡
rod bearing provides maximum
load bearing support and superb
wear resistance for high cycle life.

Polyurethane rod wiper has
excellent abrasion resistance.

Hard (60 Rc) coated I.D. high
strength aluminum alloy tube.

Floating cushion seal design allows
quick full flow to entire piston surface for instant stroke reversal.

Solid aluminum alloy piston is strong, light
weight and carries a wide graphite filled
PTFE wear band to support maximum
load conditions.

Compression type tube
seals are reusable.

Ground and polished high strength
steel piston rod has hard chrome plated
surface to provide maximum cycle life for
bushing and seals.
Port design allows full flow for
optimum cylinder operation.

Bearing retainer ring allows bearing cartridge to be removed without disassembly
of cylinder.

‡
Note: Rod bushing for 1-1/2" & 6" bores with
oversize rod is graphite filled, cast iron material.

Quick Reference
to Mounting Styles

MP1 Fixed Clevis MP2 Detachable Clevis MP3 Fixed Eye
Order Code P1
Order Code P2
Order Code P3

MS1 Angle Mount
Order Code S1

Page 2

MS2 Side Lug Mount
Order Code S2

MXO - Basic Cylinder
Order Code XO

MP4 Detachable Eye
Order Code P4

MS4 Bottom Tapped
Order Code S4

MF1 Head Rectangular
Flange - Order Code F1

MX1 Extended Tie Rods
Both Ends - Order Code X1

MT1 Head Trunnion
Order Code T6

MF2 Cap Rectangular
Flange - Order Code F2

MX2 Extended Tie Rods
Cap End - Order Code X2

MT2 Cap Trunnion
Order Code T7

Specifications subject to change without notice or incurring obligations.

MT4 Mid Trunnion
Order Code T8

MX3 Extended Tie Rods
Head End - Order Code X3

Sleeve Nut Mount
Order Code SN
10-17-12

How to Order

This field can be blank.
(or up to 8 characters max.)

Note: The fields in the model number below this line must be filled.

Model Number

32 XO –

0 6 A 1

E

Cylinder Bore
15 = 1-1/2
20 =
2
25 = 2-1/2
32 = 3-1/4
40 =
4
50 =
5
60 =
6
Order NFPA
Code Mounting
Full inches of stroke
XO . . . . MXO = Basic cylinder - no mount
00 = 0"
F1 . . . . .MF1 = Head rectangular flange
01 = 1"
F2 . . . . .MF2 = Cap rectangular flange
02 = 2"
P1 . . . . .MP1 = Fixed clevis
03 = 3"
P2 . . . . .MP2 = Detachable clevis
48 = 48"
P3 . . . . .MP3 = Fixed eye
99 = 99"(Maximum)
P4 . . . . .MP4 = Detachable eye
Fractional inches of stroke
1
T6 . . . . .MT1 = Head trunnion
A = 0"
T7 . . . . .MT2 = 1 Cap trunnion
B = 1/16"
1
T8 . . . . .MT4 = Mid trunnion
C = 1/8" Rod End Thread Code
X1 . . . . .MX1 = Extended tie rods both ends D = 3/16" 1 = Style #1 Standard male
X2 . . . . .MX2 = Cap end tie rods
E = 1/4" 2 = Style #2 Optional male
X3 . . . . .MX3 = Head end tie rods
F = 5/16" 3 = Style #3 Optional female
6 = Style #6 O.S. rod, Std. male
S1 . . . . .MS1 = Angle mount
G = 3/8"
7 = Style #7 O.S. rod, Opt. male
S2 . . . . .MS2 = Side lug
H = 7/16"
S4 . . . . .MS4 = Bottom tapped, flush mount I = 1/2" 8 = Style #8 O.S. rod, Opt. female
SN
– = Sleeve nut
Port Size & Position Code
J = 9/16"
Position 1
2
3
K = 5/8"
1/8 NPT B
H
N
1
L
=
11/16"
Trunnion pins are removable.
1/4 NPT C
I
O
M = 3/4"
3/8 NPT D
J
P
N = 13/16"
1/2
NPT
E
K
Q
O = 7/8"
3/4 NPT F
L
R
P = 15/16"

C – CT E – A D 0 1 A
Length Extensions (Leave blank if not required)
AD = Rod thread on Head End total “A” Dim (Must specify)
Example = AD01A (Full & fractional length)

CD = Shaft on Head End total “C” Dim (Must specify)
Example = CD02A (Full & fractional length)

AC = Head End total “A” & “C” Dims combined (Must specify)
Specify “A” Dim first, then “C” Dim
Example = AC01A02A (Full & fractional length)

RA = Rod Thread on Cap End Double Rod total "A" Dim
(Must specify) Example = RA01A (Full & fractional length)
RC = Shaft on Cap End Double Rod total "C" Dim
(Must specify) Example = RC02A (Full & fractional length)
RR = Cap End Double Rod total "A & C" Dims combined
(Must specify) Specify “A” Dim first, then “C” Dim
Example = RR01A02A (Full & fractional length)

AR = Rod Thread on Head End total "A" & Rod Thread
on Cap End total "A" Dims combined (Must specify)
Specify Head End “A” Dim first, then Cap End “A” Dim
Example = AR01A02A (Full & fractional length)

CR = Shaft on Head End total "C" & Shaft on Cap End
total "C" Dims combined (Must specify)
Specify Head End “C” Dim first, then Cap End “C” Dim
Example = CR01A02A (Full & fractional length)

Magnet
N = No magnet
E = Magnet sensing

4
T
U
V
W
X

Adjustable Air cushions (St'd position Head and Cap = C)
Position
1
2
3
4
No Cushions
A
A
A
A
Head & Cap
B
C
D
E
Head only
F
G
H
J
Cap only
K
L
M
N
Standard port and air cushion adjustment positions
Ports are in position #1 both ends; cushion adjustments are in
position #2 both ends.
Optional position Air cushion adjustment can be located on same
surface as standard size port on 2" bore and larger. For 1-1/2" bore
or for larger ports, consult factory. For Trunnion mounting style, ports
or air cushions can be located at Position 1 or 3 only.
Standard Ports, Diameters, and Rod Threads
St'd Port
Style #1 St'd
Code Bore NPT Position Code Rod Male Thread
15 1-1/2 3/8
D
.625
7/16-20
20
2
3/8
D
.625
7/16-20
25 2-1/2 3/8
D
.625
7/16-20
32 3-1/4 1/2
E
1.000
3/4-16
40
4
1/2
E
1.000
3/4-16
50
5
1/2
E
1.000
3/4-16
60
6
3/4
F
1.375
1-14

Style #2 Opt. Style #3 Opt.
Male Thread Female thread
1/2-20
7/16-20
1/2-20
7/16-20
1/2-20
7/16-20
7/8-14
3/4-16
7/8-14
3/4-16
7/8-14
3/4-16
11/4-12
1-14

(Viton® is a registered trademark of DuPont Corp.)
Sizing Guide – Extend Force (pounds)
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

Piston
Area
1.77
3.14
4.91
8.30
12.57
19.63
28.27

40 50 60
71 88 106
126 157 188
196 245 295
332 415 498
503 628 754
785 982 1178
1131 1414 1696

70
124
220
343
581
880
1374
1979

80
141
251
393
664
1005
1571
2262

Pressure
90 100
159 177
283 314
442 491
747 830
1131 1257
1767 1963
2545 2827

125
221
393
614
1037
1571
2454
3534

150
265
471
736
1244
1885
2945
4241

175
309
550
859
1452
2199
3436
4948

200
353
628
982
1659
2513
3927
5655

250
443
785
1228
2075
3143
4908
7067

Options
XX = No options
BF = Bumper, head end only1 (pg. 10)
Also allows use of
BR = Bumper, cap end only1 (pg. 10)
adjustable air cushions.
CT = Composite cylinder tube
DR = Double rod (pg. 4)
MR = Male rod stud with “KK” thread (pg. 10)
Available only for Style #3 Rod End
SB = Silent seal bumpers (allows use of adjustable
air cushions - pg. 10) Note: 150 psi max., 200°F max.
SR = Stainless steel piston rod
ST = Stainless steel tie rods
VS = Viton® seals (385°F max.)
WS = Metallic rod scraper
Combination Options
BB = Bumpers, head and cap1.
CR = Composite tubing and stainless rod.
CS = Composite tubing and stainless tie rods.
CU = Composite tubing, stainless rod and tie rods.
CD = Double rod and bumper (cap end only).
DB = Double rod and bumper (head & cap end).
DF = Double rod and bumper (head end only).
DM = Double rod and male rod stud (head end only).
DN = Double rod & male rod stud (cap end only).
DO = Double rod & male rod stud (head & cap end).
DS = Double rod and stainless rod.
DT = Double rod and stainless tie rods.
DU = Double rod, stainless rod and stainless tie rods.
SS = Stainless steel rod and tie rods.
WD = Composite tubing, stainless rod, stainless tie rods,
and metallic scraper.
WE = Composite tubing, stainless rod, stainless tie rods,
metallic scraper and Viton seals.
WV = Metallic rod scraper and Viton seals.
Consult factory for additional combination options.
1
OAL increases 0.062 per end.
Piston travel is minimum of specified stroke.

Sizing Guide – Retract Force Deduction (pounds)
Rod
0.625
1.000
1.375
1.750

Rod
Area
0.307
0.785
1.485
2.404

40
12
31
59
96

50
15
39
74
120

60
18
47
89
144

Specifications subject to change without notice or incurring obligations.
1-10-12

70
21
55
104
168

80
25
63
119
192

Pressure
90 100 125
28 31 38
71 79 98
134 148 186
216 240 301

150
46
118
223
361

175
54
137
260
421

200
61
157
297
481

250
76
196
371
601

Page 3

Basic Cylinder Dimensions

MXO - No mount Order Code XO

ZB Plus Stroke
LB Plus Stroke
P Plus Stroke
EE NPTF

(

6TXDUH

(

Y



6TXDUH

F



5'‘

5



5



6TXDUH



 6TXDUH


Rod Ø



Head End View
for 6" Bore and
3-1/4, 4, 5 & 6" Bore
for Oversize Rod

Head End View
1-1/2" thru 5" Bores

K
J

G

WF

Double Rod Cylinder - No mount
Use option code “DR” for double rod cylinder available with the following NFPA mounts:
MXO, MF1, MT1, MT4, MX1, MX3, MS1, MS2, MS4 or non-NFPA SN mount.
(

<

6TXDUH

(



6TXDUH

=03OXV [6WURNH
/'3OXV6WURNH
33OXV6WURNH
((137)

:)
)

)



5'‘

5



5



6TXDUH

5RG‘



 6TXDUH




Head End View
1-1/2" thru 5" Bores

*

Head End View
for 6" Bore and
3-1/4, 4, 5 & 6" Bore
for Oversize Rod

*

.7\S

Approximate Cylinder Weights (pounds)
Per Inch Stroke by
Tube Material

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

Adders for
Adders for Double Rod (DR) Models
Adders for DR – O.S. Rod Models
O.S. Rod
X0
Per Inch
Base Aluminum Steel Composite Base Stroke Additional Base Additional Per Inch Stroke Additional Base Additional Per Inch Stroke
0.64
0.16
0.96
0.16
2.10
0.8
0.16
0.24 0.36 0.23
0.80
0.20
1.12
0.16
2.70
0.8
0.16
0.30 0.45 0.28
1.02
0.26
1.34
0.16
3.60
0.8
0.16
0.30 0.49 0.28
2.15
0.44
2.76
0.20
7.10
1.7
0.20
0.50 0.74 0.47
2.46
0.44
3.07
0.20
9.30
1.7
0.20
0.60 0.99 0.56
3.00
0.68
3.61
0.20
13.00
1.7
0.20
0.60 0.99 0.56
5.32
0.85
6.24
0.24
22.00
2.0
0.24
0.90 1.33 0.83

Basic Dimensions for Single or Double Rod Cylinders (inches)
Bore
11/2"
2"
21 / 2 "
31 / 4 "
4"
5"
6"

Rod
0.625 Standard
1.000 Oversize
0.625 Standard
1.000 Oversize
0.625 Standard
1.000 Oversize
1.000 Standard
1.375 Oversize
1.000 Standard
1.375 Oversize
1.000 Standard
1.375 Oversize
1.375 Standard
1.750 Oversize

E
2.000
2.000
2.500
2.500
3.000
3.000
3.750
3.750
4.500
4.500
5.500
5.500
6.500
6.500

EE
3/8
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4

F
0.000
0.375
0.000
0.000
0.000
0.000
0.000
0.625
0.000
0.625
0.000
0.625
0.625
0.750

G
1.438
1.438
1.438
1.438
1.438
1.438
1.656
1.656
1.656
1.656
1.656
1.656
1.906
1.906

J
0.937
0.937
0.937
0.937
0.937
0.937
1.156
1.156
1.156
1.156
1.156
1.156
1.406
1.406

K
0.250
0.250
0.313
0.313
0.313
0.313
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.500

LB
3.625
3.625
3.625
3.625
3.750
3.750
4.250
4.250
4.250
4.250
4.500
4.500
5.000
5.000

Note1: Bearing retainer is 2.00 Square x 0.375 Thk. "F" dimension

Page 4

LD
4.125
4.125
4.125
4.125
4.250
4.250
4.750
4.750
4.750
4.750
5.000
5.000
5.500
5.500

P
2.250
2.103‡
2.250
2.250
2.375
2.375
2.625
2.625
2.625
2.625
2.875
2.875
3.125
3.125

R
1.428
1.428
1.838
1.838
2.192
2.192
2.758
2.758
3.323
3.323
4.101
4.101
4.879
4.879

RD
N/A
See Note 1

N/A
N/A
N/A
N/A
N/A
3.125
N/A
3.125
N/A
3.125
3.125
3.788

WF
1.000
1.375
1.000
1.375
1.000
1.375
1.375
1.625
1.375
1.625
1.375
1.625
1.625
1.875

Y
1.938
2.460
1.938
2.313
1.938
2.313
2.438
2.688
2.438
2.688
2.438
2.688
2.813
3.063

ZB
4.875
5.250
4.938
5.313
5.062
5.438
6.000
6.250
6.000
6.250
6.375
6.625
7.125
7.375

ZM
6.125
6.875
6.125
6.875
6.250
7.000
7.500
8.000
7.500
8.000
7.750
8.250
8.750
9.250

‡Note: P = 1.955 for double rod

Specifications subject to change without notice or incurring obligations.

1-3-12

Rod End Styles

Standard Rod Diameter
Rod End Style #1

%%XVKLQJ'LD
/$)

1$5RG
7XUQ'RZQ

(Standard Male – KK Thread)

$

Rod End Style #2
(Optional Male – CC Thread)

5RG‘

Oversize Rod Diameter
Rod End Style #6

..RU&&
7KUHDG

(Standard Male – KK Thread)

Rod End Style #7

'
$FURVV)ODWV

5'

&

(Optional Male – CC Thread)

:)

Standard Rod Diameter
Rod End Style #3

%%XVKLQJ'LD
'$FURVV)ODWV

(Optional Female)

Oversize Rod Diameter
Rod End Style #8

5'

1$5RG
7XUQ'RZQ

(Optional Female)

5RG‘
..7KUHDG
$'HSWK
&
:)

Rod End Dimensions (inches)
Bore
Rod
11/2" 0.625 Standard
1.000 Oversize
2" 0.625 Standard
1.000 Oversize
21/2" 0.625 Standard
1.000 Oversize
31/4" 1.000 Standard
1.375 Oversize
4" 1.000 Standard
1.375 Oversize
5" 1.000 Standard
1.375 Oversize
6" 1.375 Standard
1.750 Oversize

KK

CC

7/16-20
3/4-16
7/16-20
3/4-16
7/16-20
3/4-16
3/4-16

1/2-20
7/8-14
1/2-20
7/8-14
1/2-20
7/8-14
7/8-14
11/4-12
7/8-14
11/4-12
7/8-14
11/4-12
11/4-12
11/2-12

1-14
3/4-16

1-14
3/4-16

1-14
1-14
11/4-12

A
0.750
1.125
0.750
1.125
0.750
1.125
1.125
1.625
1.125
1.625
1.125
1.625
1.625
2.000

B
1.125
1.500
1.125
1.500
1.125
1.500
1.500
2.000
1.500
2.000
1.500
2.000
2.000
2.375

C
0.375
0.500
0.375
0.500
0.375
0.500
0.500
0.625
0.500
0.625
0.500
0.625
0.625
0.750

D
0.500
0.813
0.500
0.813
0.500
0.813
0.813
1.125
0.813
1.125
0.813
1.125
1.125
1.500

LAF
1.750
2.500
1.750
2.500
1.750
2.500
2.500
3.250
2.500
3.250
2.500
3.250
3.250
3.875

NA
0.585
0.960
0.585
0.960
0.585
0.960
0.960
1.313
0.960
1.313
0.960
1.313
1.313
1.688

RD
N/A
See Note 1

N/A
N/A
N/A
N/A
N/A
3.125
N/A
3.125
N/A
3.125
3.125
3.788

WF
1.000
1.375
1.000
1.375
1.000
1.375
1.375
1.625
1.375
1.625
1.375
1.625
1.625
1.875

Note 1: Bearing retainer is 2.00 Square x 0.375 Thk. "F" dimension.
Specifications subject to change without notice or incurring obligations.

Page 5

Flange, Clevis & Eye Mounts
MF1 – Head Rectangular Flange Order Code F1

MF2 – Cap Rectangular Flange Order Code F2

)%%ROW3ODFHV

)%%ROW3ODFHV

( 5

( 5
=-3OXV6WURNH
=)3OXV6WURNH

)+

7)
8)

:

)+

7)
8)

Rectangular Flange Mount Dimensions (inches)
Standard Rod
Bore
11/2"
2"
21/2"
1
3 /4"
4"
5"
6"

E
2.000
2.500
3.000
3.750
4.500
5.500
6.500

FB
1/4
5/16
5/16
3/8
3/8
1/2
1/2

FH
.375
.375
.375
.625
.625
.625
.750

R
1.428
1.838
2.192
2.758
3.323
4.101
4.879

TF
2.750
3.375
3.875
4.688
5.438
6.625
7.625

UF
3.375
4.125
4.625
5.500
6.250
7.625
8.625

W
.625
.625
.625
.750
.750
.750
.875

ZF
5.000
5.000
5.125
6.250
6.250
6.500
7.375

Oversize Rod

ZJ
4.625
4.625
4.750
5.625
5.625
5.875
6.625

W
1.000
1.000
1.000
1.000
1.000
1.000
1.125

ZF
5.375
5.375
5.500
6.500
6.500
6.750
7.625

ZJ
5.000
5.000
5.125
5.875
5.875
6.125
6.875

MP1 & MP3 Fixed Clevis and Eye Mounts Order Codes P1 & P3
Pivot pins and retaining rings included.

&'‘

P1 View (Clevis)

&%

/
;&3OXV6WURNH

0

&:

P3 View (Eye)

&%
&:

MP2 & MP4 Detachable Clevis and Eye Mounts Order Codes P2 & P4
Pivot pins and retaining rings included.

)/

&'‘

P2 View (Clevis)

&%

/
;'3OXV6WURNH

0

&:

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

Page 6

CB
0.750
0.750
0.750
1.250
1.250
1.250
1.500

CD
0.500
0.500
0.500
0.750
0.750
0.750
1.000

CW
.500
.500
.500
.625
.625
.625
.750

FL
1.125
1.125
1.125
1.875
1.875
1.875
2.250

L
0.750
0.750
0.750
1.250
1.250
1.250
1.500

M
0.500
0.500
0.500
0.750
0.750
0.750
1.000

Oversize
Rod
XC XD
5.750 6.125
5.750 6.125
5.875 6.250
7.125 7.750
7.125 7.750
7.375 8.000
8.375 9.125

&%
&:

Approximate Cylinder Weights (pounds)

Clevis & Eye Mount Dimensions (inches)
Standard
Rod
XC XD
5.375 5.750
5.375 5.750
5.500 5.875
6.875 7.500
6.875 7.500
7.125 7.750
8.125 8.875

P4 View (Eye)

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

F1
F2
2.70
3.70
5.00
10.30
14.00
20.00
32.00

Per Inch Stroke by Tube Material
P2
P1
P4
P3 Aluminum Steel Composite
0.36
0.23
3.20 2.30 0.24
0.45
0.28
4.10 2.80 0.30
0.49
0.28
5.50 3.70 0.30
0.74
0.47
11.50 7.50 0.50
0.99
0.56
15.50 9.90 0.60
0.99
0.56
20.10 13.30 0.60
1.33
0.83
35.00 23.00 0.90

Specifications subject to change without notice or incurring obligations.

O.S. Rod Adder
Per Inch
Base Stroke
0.8 0.16
0.8 0.16
0.8 0.16
1.7 0.20
1.7 0.20
1.7 0.20
2.0 0.24
1-4-12

Trunnion & Extended Tie Rod Mounts
MX2 – Cap Extended Tie Rods Order Code X2

MX1 – Extended Tie Rods Order Code X1
=-3OXV6WURNH

5
6TXDUH

''

''

:

)+
%%

=-3OXV6WURNH

%%

MX3 – Head Extended Tie Rods Order Code X3
''

5
6TXDUH

5
6TXDUH

%%

Extended Tie Rod Mount Dimensions (inches)

:

Std. Rod

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

)+
%%

BB
1.000
1.125
1.125
1.375
1.375
1.813
1.813

DD
1/4-28
5/16-24
5/16-24
3/8-24
3/8-24
1/2-20
1/2-20

FH
.375
.375
.375
.625
.625
.625
.750

R
1.428
1.838
2.192
2.758
3.323
4.101
4.879

W
.625
.625
.625
.750
.750
.750
.875

ZJ
4.625
4.625
4.750
5.625
5.625
5.875
6.625

O.S. Rod

W
1.000
1.000
1.000
1.000
1.000
1.000
1.125

ZJ
5.000
5.000
5.125
5.875
5.875
6.125
6.875

‡ Note: Trunnion pins are removeable. User should apply
thread locking adhesive on fastener at installation.

MT4 – Mid Trunnion Order Code T8

MT1 – Head Trunnion Order Code T6
TD‡ Dia.

7'Â'LD

7:
7*

TL

XG

7/

UT

;,

70

MT2 – Cap Trunnion Order Code T7

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

TD‡ Dia.

XJ Plus Stroke

TL

6SHFLILHGE\&XVWRPHU

Standard Rod
Oversize Rod
Minimum
XI Min.
XI Max.
XI Max.
Stroke XI Min.
3.063 3.063 + Stroke 3.438 3.438 + Stroke
0
3.188 2.938 + Stroke 3.563 3.313 + Stroke
1/4
3.188 3.063 + Stroke 3.563 3.438 + Stroke
1/8
4.031 3.469 + Stroke 4.281 3.719 + Stroke
9/16
4.031 3.469 + Stroke 4.281 3.719 + Stroke
9/16
4.031 3.719 + Stroke 4.281 3.969 + Stroke
5/16
4.781 3.969 + Stroke 5.031 4.219 + Stroke
13/16

UT

Approximate Cylinder Weights (pounds)

Trunnion Mount Dimensions (inches)

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
1-4-12

TD
1.000
1.000
1.000
1.000
1.000
1.000
1.375

TG
2.500
3.000
3.500
4.250
5.000
6.000
7.000

TL
1.000
1.000
1.000
1.000
1.000
1.000
1.375

TM
2.500
3.000
3.500
4.500
5.250
6.250
7.625

TW
1.250
1.500
1.500
2.000
2.000
2.000
2.500

UT
4.000
4.500
5.000
5.750
6.500
7.500
9.250

Standard
Rod
XG
XJ
1.750 4.125
1.750 4.125
1.750 4.250
2.250 5.000
2.250 5.000
2.250 5.250
2.625 5.875

Oversize
Rod
XG
XJ
2.125 4.500
2.125 4.500
2.125 4.625
2.500 5.250
2.500 5.250
2.500 5.500
2.875 6.125

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

T6
T7
T8
2.60
3.10
4.00
7.50
9.90
13.70
23.00

Specifications subject to change without notice or incurring obligations.

X1
X2
X3
2.30
2.80
3.70
7.50
9.90
13.30
23.00

Per Inch Stroke by Tube Material O.S. Rod Adder
Aluminum
0.24
0.30
0.30
0.50
0.60
0.60
0.90

Steel
0.36
0.45
0.49
0.74
0.99
0.99
1.33

Composite
0.23
0.28
0.28
0.47
0.56
0.56
0.83

Per Inch
Base Stroke
0.8 0.16
0.8 0.16
0.8 0.16
1.7 0.20
1.7 0.20
1.7 0.20
2.0 0.24

Page 7

Sleeve Nut, Angle, Lug & Bottom Tap Mounts
Sleeve Nut Mount Order Code SN
/%3OXV6WURNH

)

5

6TXDUH

%47KUHDG

5

%RWK(QGV

6TXDUH

:

SN - Sleeve Nut Mount Dimensions (inches)
Std. Rod

BQ
1/4-28
5/16-24
5/16-24
3/8-24
3/8-24
1/2-20
1/2-20

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

LB
3.625
3.625
3.750
4.250
4.250
4.500
5.000

R
1.428
1.838
2.192
2.758
3.323
4.101
4.879

F
.375
.375
.375
.625
.625
.625
.750

W
.625
.625
.625
.750
.750
.750
.875

O.S. Rod

F
.375
.375
.375
.625
.625
.625
.750

W
1.000
1.000
1.000
1.000
1.000
1.000
1.125

Approximate Cylinder Weights (pounds)

MS1 – Angle Mount Order Code S1

Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

XA Plus Stroke
FH

AT

AH
S

AL

Per Inch Stroke by Tube Material
S4
SN
S1
S2 Aluminum Steel Composite
2.10 2.30 2.70 0.24
0.36
0.23
2.70 2.80 3.70 0.30
0.45
0.28
3.60 3.70 5.00 0.30
0.49
0.28
7.10 7.50 10.30 0.50
0.74
0.47
9.30 9.90 14.00 0.60
0.99
0.56
13.00 13.30 20.00 0.60
0.99
0.56
22.00 23.00 32.00 0.90
1.33
0.83

AL

Base
0.8
0.8
0.8
1.7
1.7
1.7
2.0

Per Inch
Stroke
0.16
0.16
0.16
0.20
0.20
0.20
0.24

MS4 – Bottom Tap Order Code S4

SA Plus Stroke

AO
AB Bolt 6 Places

O.S. Rod Adder

MS2 – Side Lug Order Code S2

71
177DS7.'HHS

;7

61
3OXV6WURNH

6%%ROW
3ODFHV

/+
76
86

67

68
;6

66

6-

3OXV6WURNH

6:

Mounting Dimensions (inches)
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"

AB
3/8
3/8
3/8
1/2
1/2
5/8
3/4

AH
1.188
1.438
1.625
1.938
2.250
2.750
3.250

AL
1.000
1.000
1.000
1.250
1.250
1.375
1.375

Page 8

AO
.375
.375
.375
.500
.500
.625
.625

AT
.125
.125
.125
.125
.125
.188
.188

FH
.375
.375
.375
.625
.625
.625
.750

S
1.250
1.750
2.250
2.750
3.500
4.250
5.250

SA
6.000
6.000
6.125
7.375
7.375
7.875
8.500

XA
Std O.S.
5.625 6.000
5.625 6.000
5.750 6.125
6.875 7.125
6.875 7.125
7.250 7.500
8.000 8.250

LH
1.000
1.250
1.500
1.875
2.250
2.750
3.250

SB
3/8
3/8
3/8
1/2
1/2
3/4
3/4

SJ
.562
.562
.562
.656
.656
.438
.718

SS
2.875
2.875
3.000
3.250
3.250
3.125
3.625

ST SU
.500 1.063
.500 1.063
.500 1.063
.750 1.156
.750 1.156
1.000 0.969
1.000 1.219

SW
.375
.375
.375
.500
.500
.688
.688

TS
2.750
3.250
3.750
4.750
5.500
6.875
7.875

US
3.500
4.000
4.500
5.750
6.500
8.250
9.250

XS
Std O.S.
1.375 1.750
1.375 1.750
1.375 1.750
1.875 2.125
1.875 2.125
2.063 2.313
2.313 2.563

Specifications subject to change without notice or incurring obligations.

NT
1/4-20
5/16-18
3/8-16
1/2-13
1/2-13
5/8-11
3/4-10

SN
2.250
2.250
2.375
2.625
2.625
2.875
3.125

TN
0.625
0.875
1.250
1.500
2.063
2.688
3.250

TK
Std O.S.
0.375 0.313
0.500 0.500
0.625 0.625
0.750 0.750
0.750 0.750
1.000 1.000
1.125 1.125

XT
Std O.S.
1.938 2.313
1.938 2.313
1.938 2.313
2.438 2.688
2.438 2.688
2.438 2.688
2.813 3.063
1-4-12

We Make Specials !
What do you need? Tell us. We'll go to work for you!
• Strokes in decimal increments
or longer than 48" (99" maximum)
• Stop Tubes for longer strokes
• Electroless Nickel Plating
• Extruded Aluminum Cylinder Tube
(Enclosed Tie Rods)
• Hard Chrome Plated I.D. Steel Cyl. Tube
• Custom Rod End Features
• Additional Ports
• Multi-Power® Cylinders (150 psi max)
Fabco-Air attaches multiple pistons to a common shaft and provides internal air passages
through the shaft to all pistons.
Internal baffles divide the cylinder body
into separate sections or stages. When air
pressure is applied to port #2 of the cylinder
illustrated at the right, all three pistons are
pressurized simultaneously nearly tripling
the thrust. Cylinders can be built with up to
four stages enabling thrusts of over 16,000
pounds to be reached!

2

1
Stage 3

1

Stage 2

Stage 1

4

2

• Tandem Cylinders
Tandem cylinders provide nearly twice
the force on an equivalent double acting
cylinder. Two pistons are attached to a common piston rod. Ports 2 and 4 are pressurized simultaneously to nearly double the
extend force. Ports 1 and 3 are pressurized
to double the retract force.

3

1

• 3-Position Cylinders
3-Position cylinders are generally used
when three distinct rod positions are
required from a single cylinder body. Two
cylinders are assembled tip-to-tail with a
common center head. Using cylinders with
two different strokes (the shorter located on
the rear cylinder), enables the front rod to
be extended from “home” to a positive midposition or to full extension.

• Back-to-Back Cylinders
Here two cylinders are mounted back-toback. They can have the same or different
strokes and can be operated independently.
This assembly enables you to have four
combinations of rods extended or retracted.
12-10-11

4

2
CYL. 1

CYL. 2
3

CYL. 1

Specifications subject to change without notice or incurring obligations.

CYL. 2

Page 9

Options

Magnetic Piston: Option -E
• Option -E consists of a magnet
affect the strength of the piston magnet
bonded into the piston head. When
therefore affecting sensor actuation and
the piston magnet moves past an
piston position indication. Labels noting
external sensor, the magnetic field
this are affixed to the cylinder.
activates the sensor without physi• Mounting – The sensor is attached to
cal contact.
a 2-part clamp that attaches rigidly to a
• Reliability – The annular piston
tie rod and can be positioned anywhere
magnet is permanently bonded into
along the length of the cylinder for very
a groove in the piston. It is a polarprecise signaling.
ized permanent magnet of rubber
• Two sensor styles are used – (a) the
bonded barium ferrite that is very
9-2A197 Series for 1-1/ 2" thru 4"
stable and is not affected by shock.
bores requires a tie rod clamp, and (b)
Under normal usage it will remain
the 749 Series which accommodates
magnetized indefinitely.
the larger diameter tie rods of the 5" and
• Warning – External magnetic
6" bores with an integral clamp.
fields and/or ferrous objects may
Order Sensors, Sensor Clamps and Cables Separately. See page 13 for details.

Male Rod Thread Stud: Option -MR
$6WXG/HQJWK
5RG

/RFWLWHŠ

..7KUHDG
$

1R5HOLHI
1R:HDNQHVV

A high strength stud is threaded into
the female rod end and retained
with thread locking adhesive. This
method eliminates the small diameter
thread relief normally required when
machining male threads. It provides
a much stronger rod end which can
be repaired, rather than replacing
the complete rod, should the stud
become damaged.

A
2A
Part No.
KK
0.75
1.50
NMR - 7/16-20 7/16-20
3/4-16
1.13
2.25
NMR - 3/4-16
1.63
3.25
NMR - 1-14
1-14
2.00
4.00
NMR - 11/4-12 11/4-12
Also available separately for individual
installation.
Available only with Style #3 or #8 Rod End.

Rubber Bumpers Options: Head -BF‡, Cap -BR, Head & Cap -BB
A donut or pad of rubber is bonded
in place to act as the piston stop and
absorb the impact of the piston. This
reduces noise and absorbs energy.

Cylinder length will increase .062" per bumper so that the piston will
travel a minimum of specified stroke.
• Operating Temperature: –20° to 220°F.
‡
Note: –BF not available 1-1/2" bore with oversize rod.
–BF not available 1-1/2" bore with adjustable air cushion.
–BF not available 2" bore with adjustable air cushion & oversize rod.

Silent Seal Bumpers: Option -SB
Attached to the piston, these bumpers reduce the noise
caused by the impact of the piston against the end cap.
Standard adjustable air cushions may be used in conjunction
with these silent seal bumpers to further reduce end of stroke
noise and impact while giving deceleration benefits.
• Available 1-1/2" thru 5" bores only.
• Operating Temperature: –20° to 200°F.
• Operating Pressure to 150 psi.
Page 10

Static Stroke Length Reduction (inches)
Bore
11/2"
2"
21/2"
31/4"
4"
5"

0 psi
.106
.090
.201
.160
.150
.219

Specifications subject to change without notice or incurring obligations.

20 psi
.056
.070
.166
.102
.085
.158

40 psi
.028
.046
.122
.082
.065
.099

60 psi
.018
.037
.071
.048
.031
.053

80 psi
0
.018
.008
.038
.005
.015

100 psi
0
0
0
0
0
0
10-17-12

Accessories

Rod Clevis
NRC-7/16-20
NRC-1/2-20
NRC-3/4-16
NRC-7/8-14
NRC-1-14
NRC-11/4-12
NRC-11/2-12

Rod Thread
7/16-20
1/2-20
3/4-16
7/8-14
1-14
11/4-12
11/2-12

Accessories Guide
to Part Numbers

Bore
11/2, 2, 21/2
31/4, 4, 5
6

Mount
MP1 & MP2 Clevis
MP1 & MP2 Clevis
MP1 & MP2 Clevis

Eye Bracket
NEM-11/2
NEM-11/2
NEM-31/4
NEM-6
NEM-6
NEM-10
NEM-12
Eye Bracket
NEM-11/2
NEM-31/4
NEM-6

Pivot Pin
NPP-0.500
NPP-0.500
NPP-0.750
NPP-1.000
NPP-1.000
NPP-1.375
NPP-1.750
Pivot Pin
NPP-0.500
NPP-0.750
NPP-1.000

Rod Eye
NRE-7/16-20
NRE-1/2-20
NRE-3/4-16
–
NRE-1-14
NRE-11/4-12
NRE-11/2-12

Clevis Bracket
NPM-11/2
NPM-11/2
NPM-31/4
–
NPM-6
NPM-10
NPM-12

Mount
MP3 & MP4 Eye
MP3 & MP4 Eye
MP3 & MP4 Eye

Clevis Bracket
NPM-11/2
NPM-31/4
NPM-6

Clevis Bracket – Pivot pin NOT included
''+ROHV 

05

Part No.
NPM-11/2
NPM-31/4
NPM-6
NPM-10
NPM-12

&: &% &:

0

&'

)/

/5

)

5
(

''+ROHV 

&%

5
(

CB
0.750
1.250
1.500
2.000
2.500

CD
0.500
0.750
1.000
1.375
1.750

CW
0.500
0.625
0.750
1.000
1.250

E
2.500
3.500
4.500
5.000
6.500

DD
3/8-24
1/2-20
5/8-18
5/8-18
7/8-14

F
.375
.625
.750
.875
.875

FL
1.125
1.875
2.250
3.000
3.125

LR
0.500
1.063
1.250
1.875
2.000

M
0.500
.750
1.000
1.375
1.750

MR
0.563
1.063
1.125
1.750
1.875

R
1.625
2.563
3.250
3.810
4.950

Eye Bracket
05

0
/5

&'

)/
5
(

5
(

)

Part No.
NEM-11/2
NEM-31/4
NEM-6
NEM-10
NEM-12

CB
0.750
1.250
1.500
2.000
2.500

Rod Clevis – Pivot pin NOT included
(5

&'¡

&;

+H[)ODWV

Rod Eye

&:

&%

$

..7KUHDG

(5

&$

&'
$
&$&'

1-3-12

KK

A
0.750
0.750
1.125
1-14 1.625
11/4-12 2.000
11/2-12 2.250
7/16-20
1/2-20
3/4-16

CA
1.500
1.500
2.063
2.813
3.438
4.000

E
2.500
3.500
4.500
5.000
6.500

F
.375
.625
.750
.875
.875

A
0.750
0.750
1.125
1.625
1.625
2.000
2.250

FL
1.125
1.875
2.250
3.000
3.125

CB
0.750
0.750
1.250
1.500
1.500
2.000
2.500

CD
0.500
0.500
0.750
1.000
1.000
1.375
1.750

LR
0.750
1.250
1.500
2.125
2.250

CE
1.500
1.500
2.375
3.125
3.125
4.125
4.500

M
0.500
0.750
1.000
1.375
1.750

MR
0.563
0.875
1.250
1.625
2.125

CW
0.500
0.500
0.625
0.750
0.750
1.000
1.250

CX
1.000
1.000
1.250
1.500
1.500
2.000
2.375

R
1.625
2.563
3.250
3.810
4.950

ER
0.500
0.500
0.750
1.000
1.000
1.375
1.750

..

7KUHDG

Pivot Pin
[&'

Part No.
NRE-7/16-20
NRE-1/2-20
NRE-3/4-16
NRE-1-14
NRE-11/4-12
NRE-11/2-12

DD
.406
.531
.656
.656
.906

Part No.
KK
NRC-7/16-20 7/16-20
NRC-1/2-20 1/2-20
NRC-3/4-16 3/4-16
NRC-7/8-14 7/8-14
NRC-1-14
1-14
NRC-11/4-12 11/4-12
NRC-11/2-12 11/2-12

&:

&(

CD
0.500
0.750
1.000
1.375
1.750

(Includes retaining rings)

CL

&%

CB
0.750
0.750
1.250
1.500
2.000
2.500

CD
0.500
0.500
0.750
1.000
1.375
1.750

CDø
ER
0.625
0.625
0.875
1.188
1.563
2.000

Part No.
NPP-0.500
NPP-0.750
NPP-1.000
NPP-1.375
NPP-1.750

Specifications subject to change without notice or incurring obligations.

CD
0.500
0.750
1.000
1.375
1.750

CL
1.875
2.625
3.125
4.125
5.125
Page 11

Accessories
Alignment Couplers
Alignment couplers can be used in both push or
pull applications. Linear couplers can
prevent binding caused by misalignment and
allow a greater tolerance between the cylinder
centerline and the mating part.
Cylinder rod thread extension must be standard
length for use with these couplers.

)ORDW

)ORDW
%

A
7/16-20
1/2-20
3/4-16
7/8-14
1-14

11/4-12
11/2-12

B
11/4
11/4
13/4
13/4
21/2
21/2
31/4

Seal Kits – Standard Rods
Bore

11/2"
2"
21/2"
31/4"
4"
5"
6"

Single Rod
Part No.
N-11/2- -SK
N-2- -SK
N-21/2- -SK
N-31/4- -SK
N-4- -SK
N-5- -SK
N-6- -SK

) 'LD
(

*

ƒ6SKHULFDO0RYHPHQW
Part Number
NCP- 7/16-20
NCP- 1/2-20
NCP- 3/4-16
NCP- 7/8-14
NCP-1-14
NCP-11/4-12
NCP-11/2-12

$7KUHDG

Double Rod
Part No.
N-11/2- D-SK
N-2- D-SK
N-21/2- D-SK
N-31/4- D-SK
N-4- D-SK
N-5- D-SK
N-6- D-SK

C
2
2
25/16
25/16
215/16
215/16
43/8

D
1/2
1/2
1/2
1/2
1/2
1/2
13/16

E
3/4
3/4
11/8
11/8
15/8
15/8
21/4

$7KUHDG('HHS
+$FURVV)ODWV

'
&
F
5/8
5/8
31/32
31/32
13/8
13/8
13/4

G
1/2
1/2
13/16
13/16
15/32
15/32
11/2

H
1
1
11/2
11/2
21/4
21/4
3

Max. Pull
Load lbs.
2,535
3,500
8,750
9,750
16,125
19,600
34,000

Rod Bushings
(Includes standard seals
for the bushing only.)

Rod Dia.
5 /8"
1"
13/8"
13/4"

Part No.
N-0.625-BK
N-1.000-BK
N-1.375-BK
N-1.750-BK

Insert “H” or “C” at
for cushion at head
end or cap end, or “HC” for both ends.
Leave blank if none.
For Viton® seal kits add suffix “V” to part
numbers above. Consult factory for pricing
specific Viton® kit part numbers.
For oversize rod seal kits, add Suffix
"OS" to the part numbers above.

Page 12

Specifications subject to change without notice or incurring obligations.

1-3-12

Magnetic Sensors & Mounting Clamps

Warning!

Temperature Range:

Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of
sensors. See wiring diagrams included with each sensor.

–20° to + 80°C (–4° to + 176°F)

Sensors for 1-1/2" to 4" Bores
9-2A197 Series Sensor &
Clamp for 1-1/2" to 4" Bores.
Order clamps separately.

9 Foot Prewired Sensor

Quick Disconnect Sensor

Quick Disconnect Sensor
Shown in Clamp

LED Lighted Magnetic Piston Position Sensors: Bores 1-1/2" – 4"
Product 9 ft. Prewired P/N Quick Discon. P/N
Electrical Characteristics
5-120 VDC/VAC, 0.5 Amp Max., 10 Watt Max., SPST N.O., 3.5 Voltage Drop
Reed Switch 9-2A197-1004
9-2A197-1304
Sourcing, PNP, 6-24 VDC, 0.5Amp Max., 1.0 Voltage Drop
Electronic 9-2A197-1033
9-2A197-1333
Sinking, NPN, 6-24VDC, 0.5Amp Max., 1.0 Voltage Drop
Electronic 9-2A197-1034
9-2A197-1334

9-2A197 Series Sensor Mounting Clamps – Part Number 800-200-000

Sensors for 5" and 6" Bores
749 Series Sensor with Integral Clamp (shown prewired)

LED Lighted Magnetic Piston Position Sensors: Bores 5" – 6"
Product 9 ft. Prewired P/N Quick Discon. P/N
Electrical Characteristics
5-240 VDC/VAC, 1 Amp Max., 30 Watt Max., SPST N.O., 3.0 Voltage Drop
Reed Switch 749-000-004
749-000-504
Sourcing, PNP, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop
Electronic
749-000-531
749-000-031
Sinking, NPN, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop
Electronic
749-000-532
749-000-032

Female Cordsets

Female Cordsets for
9-2A197 Series
Quick Disconnect Sensors
Female Cordsets available
in 1, 2, & 5 meter lengths

12-10-11

Female Cordsets for
749 Series
Quick Disconnect Sensors

Length 1 Meter 2 Meter 5 Meter Length
Part No. CFC-1M CFC-2M CFC-5M Part No.

2 Meter

5 Meter

CFC-2M-12

CFC-5M-12

Specifications subject to change without notice or incurring obligations.

Page 13

1 Year Limited Warranty for Catalog #NF-6 Products
Subject to the following conditions, FABCO-AIR, Inc., warrants to its immediate purchaser (Purchaser) that at the time
of shipment this product is free and clear of all liens and encumbrances, is free from defects in material and workmanship
and will conform to samples if the order is based on samples, or to FABCO-AIR's applicable product specifications, or
to Purchaser's written specifications to the extent they have been accepted in writing by FABCO-AIR. All products are
subject to FABCO-AIR's normal manufacturing and commercial variations and practices. THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN,
WHETHER EXPRESSED OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Purchaser's
exclusive remedy, and FABCO-AIR's sole liability under this warranty is expressly limited to the correction, replacement
or refund of purchase price, at FABCO-AIR's option, of products which are returned freight prepaid, accompanied by
proof of purchase and written claim of defect, and upon which inspection by FABCO-AIR and in FABCO-AIR's sole
judgement do not comply with this warranty.
All warranties made by FABCO-AIR or imposed on FABCO-AIR by law shall expire one (1) year from date of shipment by FABCO-AIR.
This warranty does not cover and no warranty is made with respect to: (A) failures not reported to FABCO-AIR within
the period specified above; (B) failure or damage due to misapplication, misuse, abuse, improper storage or handling,
abnormal conditions of temperature, water, dirt, corrosive substances, or other contaminants; (C) products which have
been repaired with parts or materials not furnished or approved by FABCO-AIR or by anyone other than FABCO-AIR
or its authorized representative or products which have been in any way tampered with or altered; and (D) products
damaged in shipment or storage or otherwise without fault of FABCO-AIR.
Limitations on Liability
FABCO-AIR's total responsibility for any claims, damages, losses or liabilities related to the product covered hereunder
shall not exceed the purchase price of such product. In no event shall FABCO-AIR be liable for any special, indirect,
incidental or consequential damages of any character, including, but not limited to, loss of use of productive facilities
or equipment, lost profits, property damage, transportation, installation or removal or lost production whether suffered
by Purchaser or any third party. FABCO-AIR disclaims all liability for any and all costs, claims, demands, charges,
expenses or other damages, either direct or indirect, incident to all property damage arising out of any cause of action
based on strict liability. This warranty gives you specific legal rights and you may have other rights from state to state.

Page 14

Specifications subject to change without notice or incurring obligations.

12-10-11

Specifications subject to change without notice or incurring obligations.

Page 15

Fabco-Air Product Catalog Library

Cylinders, Valves
and Accessories
Catalog #CV9

Pancake® II Air Cylinders
Catalog #Pan2-2

Square Pancake® II
Air Cylinders
Catalog #SqPan2

ISO 6431 Cylinders
Catalog #FAQR-09

Twin Rod, Non-Rotating
Air Cylinders - Catalogs
#FDF-09 & #FDXS-09

High Closing Force
Angular Grippers
Catalog #FKHC-10

Multi-Power® Air Presses
Catalog #FP16

Swing Clamps
Catalog #SC-DB04

Linear Slides - 6 Families
Catalog #LS-03

Compact Finger Slides
Catalog #FDH-10

ISO 6432 Cylinders
Catalog #FAE-09

Stopper Cylinders
Catalog #ST-SC

NAMUR Solenoid Valves
Catalog #FVEN-10

Global Series™ Metric
Air Cylinders
Catalog #GC-15

Air Pilot and
Solenoid Valves
Catalog #FVA.E-09

Air Table Slides
Catalog #FGXS-10

Wide & Narrow Parallel
Grippers - Catalogs
#FKHZ-10 & #FKHQ-10

Toggle Type
Angular Grippers
g #FKHT-10
Catalog

Modular Air Preparation
System - FRLs
Catalog #FRL-06

Guided Motion
Air Cylinders
Catalog #FGM-10

Pneumatic Rotary
Actuators
Catalog #FRA.C-09

Stainless Steel Body
Air Cylinders
Catalog #SSB-03

Pneumatic & Hydraulic
Swing Clamps
Catalog #FML.H

Wide Opening
Parallel Grippers
Catalog #FKHL-10

Original Pancake®
Air Cylinders
Catalog #CV9

Pneumatic
Crimping Tools
Catalog #FCT-JY07

Magnetically Coupled
Rodless Air Cylinders
Catalog #FGYBR-11

Magnetically Coupled
Rodless Slides
Catalog #FGYS-11

Angular Grippers
Catalog #FKA-09

3 Series of Angular &
Parallel Motion Grippers
Catalog #GR8

FABCO-AIR, Inc. • 3716 N.E. 49th Avenue • Gainesville, FL 32609 • Tel (352) 373-3578
• Fax (352) 375-8024 • E-Mail: service@fabco-air.com • Web Site: www.fabco-air.com
1-30-12

Page 16

Specifications subject to change without notice or incurring obligations.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.4 (Macintosh)
Modify Date                     : 2012:10:24 12:53:08-04:00
Create Date                     : 2012:10:24 12:53:08-04:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:c22ecbed-f516-be4d-aa89-af5111b01336
Instance ID                     : uuid:4f3d6c73-2549-4a45-aed6-54584c0953bd
Page Count                      : 16

EXIF Metadata provided by EXIF.tools