Fluke 1507 Users Manual

: Fluke Fluke-1507-Users-Manual-808076 fluke-1507-users-manual-808076 fluke pdf

Open the PDF directly: View PDF .
Page Count: 4

Manual Supplement

© 2005-2014 Fluke Corporation. All rights reserved. 

Manual Title: 1507/1503 Users Supplement Issue: 6

Part Number: 2416013 Issue Date: 10/14

Print Date: June 2005 Page Count: 3

Revision/Date:

This supplement contains information necessary to ensure the accuracy of the

above manual.

1507/1503 Users Manual Supplement

10/14 1

Change #1

On page 4, under Battery Saver (Sleep Mode), replace the last sentence in the first paragraph

with the following:

The Tester comes out of Sleep mode when the rotary switch is turned to off and back on.

On page 24, under Model 1503, replace the Display Range, Output Voltage 500V:

From:

0.1 to 20.00 MΩ

To: 0.01 to 20.00 MΩ

Change #2

On page 5, under Table 2, add the following:

To avoid shock, injury, or damage to the Tester, use only accessories with 1000V CAT III or 600V CAT IV

rating.

Manual Supplement 1507/1503 Users

2 10/14

Change #3

On page 3, add the following to the Symbols table:

 Conforms to relevant South Korean EMC Standards.

 Conforms to CAN/CSA-C22.2 No. 61010-1, second edition, including Amendment 1.

CAT II Measurement Category II is applicable to test and measuring circuits directly to

utilization points (socket outlets and similar points) low-voltage MAINS installation.

CAT III Measurement Category III is applicable to test and measuring circuits connected to th

e

distribution part of the building’s low-voltage MAINS installation.

CAT IV Measurement Category IV is applicable to test and measuring circuits connected at th

source of the building’s low-voltage MAINS installation.

Change #4, 61173

On page 21, under General Specifications, replace Altitude with:

Altitude ......................................................... Operating: 2000 m CAT IV 600 V,Non Operating (Storage): 12,000 m

1507/1503 Users Manual Supplement

10/14 3

Change #5, 64919, 65176, 367

On page 20, under General Specifications, remove Shock, Electromagnetic Compatibility,

Safety, Certifications, and add:

Safety ..................................................................... IEC 61010-1: 600 V CAT IV, Pollution Degree 2

Electromagnetic Environment ............................. IEC 61326-1: Portable

Electromagnetic Compatibility ............................ Applies to use in Korea only.Class A Equipment (Industrial Broadcasting &

Communication Equipment)

This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take

notice of it. This equipment is intended for use in business environments and is not to be used in homes.