Fluke 1750 B Users Manual

: Fluke Fluke-1750-B-Users-Manual-809082 fluke-1750-b-users-manual-809082 fluke pdf

Open the PDF directly: View PDF .
Page Count: 3

Manual Supplement

© 2012-2014 Fluke Corporation. All rights reserved. 



Manual Title: 1750 Operators Supplement Issue: 5

Print Date: October 2006 Issue Date: 10/14

Revision/Date: 4, 7/11 Page Count: 2

This supplement contains information necessary to ensure the accuracy of the

above manual. This manual is distributed as an electronic manual on the

following CD-ROM:

CD Title: 1750

CD Rev. & Date: 13, 3/2012

CD PN: 2774701

1750 Operator Manual Supplement

6/13 1

Change #1

On page 4, move the first bullet item to the Standard Accessories table:

CS1750/1760 Case Polyester, for Fluke 1750 & 1760 2673962

On page 4, Table 2:

Change:

Personal Digital Assistant (PDA) with USB cable and accessories 2386780

To:

Android based tablet computer- manufacturer and model may vary. Contact Fluke

Change #2

On page 9, delete the Installing the Software and Installing Power View on the PDA sections

and replace with:

For complete instructions on how to install the Android tablet computer, go to the Power

Quality Software Downloads page at www.Fluke.com.

Change #3

On page 4, Table 2, remove the following:

Sets of international ac power plug adapters for the PDA charger 2583479

Change #4

On page 48, under Regulatory Information for Wireless Communication, in the Cautions,

replace the third bullet with:

• FCCID: See rear decal on Fluke 1750 for the appropriate ID.

Change #5, 65922

On page 4, replace the CAT III and CAT IV with the following and add:

 Conforms to relevant South Korean EMC Standards

CAT III Measurement Category III is applicable to test and measuring circuits connected to the

distribution part of the building’s low-voltage MAINS installation.

CAT IV Measurement Category IV is applicable to test and measuring circuits connected at the

source of the building’s low-voltage MAINS installation.

On page 49, under General Specifications remove the Conformance section.

On page 52, under Environmental and Safety Specifications remove Standards

Conformance, EMC and Safety and replace with:

Manual Supplement 1750 Operator

2 10/14

Safety ................................................IEC 61010-1: Installation 300 V CAT II, Measurement 600 V CAT IV / 1000 V

CAT III, Pollution Degree 2

Altitude ...............................................2000 m

IP Rating ............................................IEC 60529: IP30

Electromagnetic Environment............IEC 61326-1: Basic

Electromagnetic Compatibility ...........Applies to use in Korea only. Class A Equipment (Industrial Broadcasting &

Communication Equipment) [1]

[1] This product meets requirements for industrial (Class A) electromagnetic

wave equipment and the seller or user should take notice of it. This

equipment is intended for use in business environments and is not to be

used in homes.

Change #6, 48

On page 5, replace the 5th bullet with:

• Flexible Current Transformers 3210-PR-TF-II 1000 Amp, Flex CT 24 inch, 3310-PR-TF-II 5000 Amp, Flex CT

24 inch, 3312-PR-TF-II 5000 Amp, Flex CT 48 inch.

On pages 4 and 5 remove the following bullets:

• 4006 RPM, Security CBL, Steel, 6 ft. Looped Lockable

• 4003 RPM, Shipping Caddy with Wheels Power Recorder

• 4005 RPM, Shipping Container, Reusable

• Interface and Extension Cables 3570 CT Cable