Fluke 28 Ii Users Manual MS4
2015-09-09
: Fluke Fluke-28-Ii-Users-Manual-805572 fluke-28-ii-users-manual-805572 fluke pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Manual Supplement Manual Title: Part Number: Print Date: Revision/Date: 28 II Ex Calibration Web-Only May 2012 Supplement Issue: Issue Date: Page Count: 4 2/14 2 This supplement contains information necessary to ensure the accuracy of the above manual.. © 2012-2014 Fluke Corporation. All rights reserved. 28 II EX Calibration Manual Supplement Change #1, 62942 On page 8, replace Duty Cycle (Vdc and mVdc) with: Duty Cycle (Vdc and mVdc) Range 0.0 % to 99.9 % Accuracy [1] Within (0.2 % per kHz + 0.1 %) for rise times <1 s. [1] 0.5 Hz to 200 kHz, pulse width >2 s. Pulse width range is determined by the frequency by the frequency of the signal. [2] For 6 V dc range accuracy is unspecified. [2] Under MIN MAX Recording change: From: 250 s (peak) Specified accuracy 100 counts for changes >250 s in duration (add 100 counts for readings over 6000 counts) (add 100 counts for readings in Low Pass mode) [1] To: 250 s (peak) Specified accuracy 200 counts for changes >250 s in duration (add 100 counts for readings over 6000 counts) (add 100 counts for readings in Low Pass mode) [1] On page 14, Step 19 replace the Range: From: 6 V To: 60 V On page 15, Step 44 replace the UUT Measurements: From 44 0.28 nf 0.48 nf 44 0.70 nf 1.10 nf To: Change #2 On page 14, Steps 14, 15 ,16 , 17 & 18 replace the Low Limit and the High Limit with: Low Limit High Limit 99.93 kHz 99.97 kHz 199.48 kHz 199.52 kHz 99.93 kHz 99.97 kHz 99.93 kHz 99.97 kHz 999.8 Hz 1000.2 Hz On page 15, Step 46, replace Low Limit and the High Limit with: Low Limit 9.2 F 11/12 High Limit 9.8 F 1 Manual Supplement 28 II EX Calibration Change #3, 65782 On page 4, in the Symbols table, remove CAT III, CAT IV and CSA C1 and add: Conforms to relevant North American Safety Standards Conforms to relevant South Korean EMC Standards CAT II Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. CAT III Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building’s low-voltage MAINS installation. CAT IV Measurement Category IV is applicable to test and measuring circuits connected at the source of the building’s low-voltage MAINS installation. On page 5, replace Electromagnetic Compatibility and IP Rating with the following, and remove Shock, Safety Compliance and Certifications and add: IP Rating .................................................. IEC60529: IP67 (Non-operating) Safety ....................................................... IEC 61010-1: 600 V CAT IV / 1000 V CAT III, Pollution Degree 2 Electromagnetic Environment ............... IEC 61326-1: Portable Electromagnetic Compatibility .............. In an RF field of 3 V/M, accuracy = specified accuracy +20 counts, except 600 A dc range total accuracy = specified accuracy +60 counts. Temperature not specified Applies to use in Korea only. Class A Equipment (Industrial Broadcasting [1] & Communication Equipment) [1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. Change #4 On page 15, replace step 49 with: 49 VDC Peak Min/Max 6V 6 Vpp, 500 Hz Sq. Wave, DC offset 1 V 2 -1.798 V to -2.202 V 3.797 V to 4.203 V 2/14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : Microsoft Word - MS4.doc Creator : otto Create Date : 2014:01:30 08:18:19-08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2014:01:30 08:18:19-08:00 Producer : Acrobat Distiller 10.1.7 (Windows) Document ID : uuid:7c9fc87d-1d61-4b1d-8904-52741506e56a Instance ID : uuid:e21e24fe-7716-45dc-ac6a-4042cc5309db Page Count : 3 Author : ottoEXIF Metadata provided by EXIF.tools