Fluke 3000 Fc Users Manual

: Fluke Fluke-3000-Fc-Users-Manual-805313 fluke-3000-fc-users-manual-805313 fluke pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

3000 FC
Wireless Multimeter
Safety Information
Go to www.fluke.com to register your product and find more
information.
A Warning identifies conditions and procedures that are dangerous to
the user.

 Warning
To prevent possible electrical shock, fire, or personal injury:
x

Carefully read all instructions.

x

Use the Product only as specified, or the protection
supplied by the Product can be compromised.

x

Limit operation to the specified measurement
category, voltage, or amperage ratings.

x

Do not use the Product around explosive gas, vapor,
or in damp or wet environments.

x

Do not touch voltages > 30 V ac rms, 42 V ac peak,
or 60 V dc.

x

Do not exceed the Measurement Category (CAT)
rating of the lowest rated individual component of a
Product, probe, or accessory.

x

Measure a known voltage first to make sure that the
Product operates correctly.

x

Do not use, and disable the Product if it is damaged.

x

Do not work alone.

x

Disconnect power and discharge all high-voltage
capacitors before you measure resistance,
continuity, capacitance, or a diode junction.

x

Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes)
to prevent shock and arc blast injury where
hazardous live conductors are exposed.

x

Remove circuit power before you connect the
Product in the circuit when you measure current.
Connect the Product in series with the circuit.

x

Limit operation to the specified measurement
category, voltage, or amperage ratings.

x

Have an approved technician repair the Product.

PN 4466491 May 2014 ©2014 Fluke Corporation. All rights reserved.

x

Do not operate the Product with covers removed or
the case open. Hazardous voltage exposure is
possible.

x

Use only specified replacement parts.

x

Remove the input signals before you clean the
Product.

x

Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.

x

The battery door must be closed and locked before
you operate the Product.

x

Remove the test leads and all input signals before
you replace the batteries or fuses.

x

Do not use the Product if it operates incorrectly.

x

Examine the case before you use the Product. Look
for cracks or missing plastic. Carefully look at the
insulation around the terminals.

x

Use only correct measurement category (CAT),
voltage, and amperage rated probes, test leads, and
adapters for the measurement.

x

Do not use test leads if they are damaged. Examine
the test leads for damaged insulation, exposed
metal, or if the wear indicator shows. Check test lead
continuity.

x

Keep fingers behind the finger guards on the
probes.

x

Do not touch the probes to a voltage source when
the test leads are connected to the current terminals.

x

Replace a blown fuse with exact replacement only
for continued protection against arc flash.

x

Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.

x

Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to chemicals
occurs, clean with water and get medical aid.

x

Connect the common test lead before the live test
lead and remove the live test lead before the
common test lead.

x

Remove all probes, test leads, and accessories that
are not necessary for the measurement.

x

Do not use the TL175 or TP175 test probes in CAT III
or CAT IV environments without the probe tip fully
extended and correct category rating visible in the
window.

x

When the TL175 is used with instruments or other
accessories, the lowest category rating of the
combination applies. One exception is when the
probe is used with the AC172 or AC175.

x

Make sure test leads are firmly connected to
instrument and other accessories.

Symbols
Symbol

Description



Risk of Danger. Important information. See Manual.


T

Conforms to European Union directives
Conforms to relevant North American Safety Standards.

‘

Battery



Hazardous voltage.

<

Conforms to relevant Australian EMC requirements

}

Conforms to relevant South Korean EMC standards.

ˆ

Fuse

CAT III

Measurement Category III is applicable to test and
measuring circuits connected to the distribution part of
the building’s low-voltage MAINS installation.

CAT IV

Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.



K

Double Insulation
This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic household
waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and
Control Instrumentation" product. Do not dispose of this
product as unsorted municipal waste. Go to Fluke’s
website for recycling information.

Safety Specifications
Operating Temperature.....................-10 °C to +50 °C
Operating Altitude .............................d2000 m
7

Frequency Overload Protection ........d10 V-Hz

LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for three years from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions of
operation or handling. Resellers are not authorized to extend any
other warranty on Fluke’s behalf. To obtain service during the
warranty period, contact your nearest Fluke authorized service center
to obtain return authorization information, then send the product to
that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.

11/99

Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2014:03:21 13:51:17-07:00
Create Date                     : 2014:03:21 13:51:17-07:00
Metadata Date                   : 2014:03:21 13:51:17-07:00
Creator Tool                    : Adobe Acrobat Pro 11.0.0
Format                          : application/pdf
Title                           : untitled
Description                     : Safety Information
Creator                         : baron
Document ID                     : uuid:464d1e09-54d3-473a-ab5e-c0376244acfc
Instance ID                     : uuid:c225fb9b-841d-40d4-a1c0-738e99f8a32a
Producer                        : Acrobat Distiller 11.0 (Windows)
Page Count                      : 4
Author                          : baron
Subject                         : Safety Information

EXIF Metadata provided by EXIF.tools