Fluke 353 True Rms 2000 A Brochure

: Fluke Fluke-353-True-Rms-2000-A-Brochure-807538 fluke-353-true-rms-2000-a-brochure-807538 fluke pdf

Open the PDF directly: View PDF .
Page Count: 2

771/772/773 Milliamp

Clamp Meter

Product category/

major features General benefits Specific benefits Value 771 772 773

Measure mA signals for

PLC and control

system\analog I/O without

breaking the loop

Measures low level

dc current

Correlate process indication

with real physical value

Saves process downtime–

and money for

automation professionals •••

Measure output signals

from transmitters without

breaking the loop

Maintain and troubleshoot

process and automation

equipment without

breaking the loop

No disruption to the process Saves process downtime–

and money for instrumenta-

tion professionals •••

Detachable clamp with

extension cable

Measurements in

tight locations

Enables measurements in

difficult situations

Measurements can be

quickly carried out •••

Source, simulate and

measure mA signals in

circuit (break the loop)

Confirm non-contact

measurement. Have the

next tool in hand

for troubleshooting

(source simulate)

Eliminates need to return to

shop to get a loop calibra-

tor for troubleshooting after

finding a bad signal with

non-contact measurement

Helps speed up loop

troubleshooting–

saves time and money • •

Source and measure V dc Troubleshoot voltage input

and output devices

Measure presence of 24 V

loop power. Measure 1 to 5

or 0 to 10 V process signals.

Eliminates need to return to

shop to get a voltage source

tool or a DMM.

Saves time and money.

•

4 to 20 mA in/out Dual channel mA source

and measurement for

troubleshooting

Source 4 to 20 mA sig-

nals into valves and signal

conditioners and simultane-

ously measure 4 to 20 mA

positioning output signals.

Quick troubleshooting

of devices with mA

inputs and outputs.

Save time and money.

•

4 to 20 mA scaled output Scaled mA output

provides a mA signal output

representative of the

measured mA value

Connect a logging DMM and

log the mA signal without

breaking the loop

Troubleshoot and

document intermittent

or erratic 4 to 20 mA

loop signals.

•

Loop power supply Power a transmitter Substitute testing of the

installed 24 V loop power

supply. Power a transmitter

and measure its mA output

signal for troubleshooting.

Eliminates need to return to

shop to get a power supply.

Saves time and money. • •

Dual backlit display with

both mA measurement and

percent of 4 to 20 mA span

Clear measurement

presentation

Quick measurement

evaluation

Saves time, saves money

•••

Measurement Spotlight Illuminates hard to see wires

in dark enclosures

Measurement process is

easier and quicker

Saves time •••

Measure up to 99.9 mA

range non-contact

Wide range of measurements Measures 10 to 50 mA sig-

nals in older control systems

Only one instrument needed

for multiple applications •••

Automatic power off After 15 minutes and

2 minute automatic off for

backlight and spotlight

Saves battery life Saves money on batteries

•••

The Fluke mA Clamp Meters will save you time

and money. These charts show you how based

on features/benets and then in dollars and cents.

771 772 773

Activity for cost savings

Savings per

occurrence

Occurrences

per month

Assumed

labor* cost/hr Total monthly savings

Time saved not having to remove a

wire and break the loop for mA

measurements

0.1 hour 25 $75 $188 $188 $188

Time saved not needing to call the

control room to isolate a loop so the

loop can be broken without process

disruption

0.1 hour 10 $150 $150 $150 $150

Time saved testing analog I/O on a PLC

not needing to check measurements on

a console

0.1 hour 20 $75 $150 $150 $150

Money saved by eliminating catastroph-

ic plant outage caused by accidentally

opening a critical loop

$10,000

or more

0.01 $100 $100 $100

Time saved by not having to return

to the shop for a mA loop calibrator

to troubleshoot a loop

0.5 hour 6 $75 $0 $225 $225

Time saved troubleshooting devices

with mA inputs and outputs

0.5 hour 4 $75 $0 $0 $150

Repair of intermittent or erratic 4 to

20 mA loops

1 hour 1 $75 $0 $0 $75

Totals $588 $813 $1,038

*Estimated US rate

In dollars and cents it doesn’t take

long to cover the cost of the tool

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675 200 or

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

©2009 Fluke Corporation.

Specifications subject to change without notice.

Printed in U.S.A. 3/2009 3462502 D-EN-N Rev A

Modification of this document is not permitted

without written permission from Fluke Corporation.

Fluke. Keeping your world

up and running.®