Fluke 373 Users Manual MS3

: Fluke Fluke-373-Users-Manual-807686 fluke-373-users-manual-807686 fluke pdf

Open the PDF directly: View PDF .
Page Count: 2

Manual Supplement

© 2010-2013 Fluke Corporation. All rights reserved..

Manual Title: BP Pump 2 Operator Supplement Issue: 3

Part Number: 2196592 Issue Date: 4/13

Print Date: June 2007 Page Count: 1

Revision/Date:

This supplement contains information

necessary to ensure the accuracy of

the above manual.

BP Pump 2 Operators Manual Supplement

4/13 1

Change #1, 55935

On page 1-11, following Pressure Generation add:

Dynamic NIBP Simulation Repeatability…..2 mmHg (at maximal pulse size

independent of device under

test)

Change #2, 56150, 56170

On page 1-11, under Pressure Measurement, change the

High-Accuracy Version to the following:

High-Accuracy Version…………………….0.7 mmHg (0.09 kPa)

Change #3, 63302, 65378

On page 1-4, delete the entire General Safety Considerations

section.

On page 1-4, in the Symbols Table delete the ETL Symbol and

add:



Conforms to relevant North American Safety Standards.

 Conforms to relevant South Korean EMC Standards.

On page 1-10, following Specifications, delete Mains Voltage,

Environmental Conditions and add the new section:

General Specifications

Power Line .................................................. 100 - 240 V ac 50/60 Hz, 60 VA

Operating Temperature .............................. 15 °C to 40 °C

Storage Temperature .................................. -20 °C to +65 °C

Relative Humidity ........................................ 90 % max

Operating Altitude ....................................... 2000m

Safety .......................................................... IEC 61010-1: CAT II 300 V, Pollution

Degree 2

Electromagnetic Environment ..................... IEC 61326-1: Basic

Electromagnetic Compatibility .................... Applies to use in Korea only. Class A

Equipment (Industrial Broadcasting &

Communication Equipment) [1]

[1] This product meets requirements for industrial (Class A) electromagnetic

wave equipment and the seller or user should take notice of it. This equipment is

intended for use in business environments and is not to be used in homes.