Fluke Oc4Usb Users Manual
104795-Installationsheet 104795-InstallationSheet 104795-InstallationSheet 095969 Batch8 unilog cesco-content
OC4USB OC4usb__iseng0000
OC4USB to the manual 1d03efd6-f9b5-44ea-811f-310936486738
2015-02-02
: Fluke Fluke-Oc4Usb-Users-Manual-427974 fluke-oc4usb-users-manual-427974 fluke pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
® OC4USB Optical Cable for USB Instruction Sheet Specifications Type of interface: Optically isolated serial to USB adapter Baudrate: 57.6 k Baud max Logic States: SPACE = 0, Light with wavelength 800 nm MARK =1, No light Handshake method: XON/XOFF, Software handshake only Environmental Meets requirements of MIL-T-28800D Type III, Class 3. Temperature Operating: -20 °C to +55 °C Storage: -20 °C to +70 °C Mechanical Cable length: Weight: 1.65 m 0.1 kg Sep 2004 © 2004 Fluke Corporation. All rights reserved. Printed in The Netherlands. All product names are trademarks of their respective companies Using the Interface Cable PC Requirements - USB 1.1 (or higher) port on the PC. - Windows XP/2000/Me/98 Second Edition. Installing the USB-IR cable drivers - Log into an account with Administrator privileges (Windows XP or Windows 2000). - Plug the USB cable into an USB port. - Windows will respond that it has "found new hardware", and the Windows Hardware Wizard dialog will appear. - Insert the CD-ROM with the USB drivers (Included with cable or on FlukeView CD-ROM). - Click the "Next>" button on the Hardware Wizard dialog - The Hardware Wizard will find the drivers on the CD-ROM ("Prolific USB-to-serial bridge" on Windows XP/2000, or "USB to Serial Port" on Windows 98SE/Me). Note: for Windows XP users, you may get a dialog box warning you that this driver "has not passed Windows Logo Testing". Just click the "Continue anyway" button. - The Hardware Wizard will finish, the USB-IR cable drivers have now been installed. - Your PC may need to reboot before the USB-IR cable can be used. Note on Windows XP/2000: if you attach the USB-IR cable to a different USB port on your PC, you will have to repeat the installation of the drivers. Determining the USB-IR Cable's COM port - Attach the cable to the PC. - Go to the Windows Control Panel. - Open the "System Properties" dialog box. - Open the Device Manager: On Windows 2000/XP, click on the "Hardware" tab of the "System Properties" dialog box and click on the "Device Manager" button, On Windows 98SE/Me, click the "Device Manager" tab. - On the "Device Manager" dialog box, look under the "Ports (COM & LPT)" tree. - The COM port associated with the USB-IR cable is listed there, as: "Prolific USB-to-serial bridge" (Windows 2000/XP), "USB to Serial Port" (Windows 98 SE/Me). Changing the COM port # Some programs require COM 1, 2, 3 or 4 and the USB cable is often installed as COM 5 or higher. To change the assigned COM port number, do the following: - Open Device Manager. - On the "Device Manager" dialog box, look under the "Ports (COM & LPT)" tree. - Click on the "Port Settings" tab. Click on the "Advanced" button. - On the bottom left side pull down the bar and select COM 1, 2, 3 or 4 (NOTE: Choose one that dos not say "in use" next to it). Click "OK". - Click "OK" again. Notice that the device will show up as being on the same COM port that it was before (i.e., COM5), but will show up on the new port if you close the Device Manager and open it again. - Close the Device Manager. Limited Warranty & Limitation of Liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke Authorized Service Center to obtain return authorization information, then send the defective product to that Service Center with a description of the problem. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Fluke Corporation P.O. Box 9090 Everett WA 98206-9090 USA. Fluke Industrial B.V. P.O. Box 90 7600 AB Almelo The Netherlands Service Centers To locate an authorized service center, visit us on the World Wide Web: http://www.fluke.com or call Fluke using any of the phone numbers listed below: +1-888-993-5853 in USA and Canada +31-40-2675-200 in Europe +1-425-446-5500 from other countries
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:08:31 09:07:56Z Modify Date : 2004:08:31 11:08:57+03:00 Page Count : 1 Creation Date : 2004:08:31 09:07:56Z Mod Date : 2004:08:31 11:08:57+03:00 Producer : Acrobat Distiller 5.0 (Windows) Author : hnijhuis Metadata Date : 2004:08:31 11:08:57+03:00 Creator : hnijhuis Title : Microsoft Word - oc4usb.doc Has XFA : NoEXIF Metadata provided by EXIF.tools