FlyDigi Electronics Technology X8 Flydigi X8 Pro Wireless Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3934007
Application ID	pfGwT1g3zwitVF51E87Rcw==
Document Description	User_Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	292.23kB (3652862 bits)
Date Submitted	2018-07-23 00:00:00
Date Available	2018-07-23 00:00:00
Creation Date	2018-03-29 10:05:37
Producing Software	Adobe Acrobat Pro 11.0.0
Document Lastmod	2018-03-29 10:05:37
Document Title	User_Manual
Document Creator	Adobe Acrobat Pro 11.0.0

Flydigi X8 Pro Wireless Controller
User Manual
Model No.: FeiZhi X8 Pro
FCC ID: 2AORE-X8
3. Controller Mode
Bluetooth Mode
Hold and press B+Logo buttons for 5 seconds
Mode
Wireless Android Mode
Hold and press A+Logo buttons for 5 seconds
Xinput Mode
Hold and press X+Logo buttons for 5 seconds
Connection
Method
System
Supported
Device
Supported
2.4G Wireless
Bluetooth
Android
Cellphone/Tablets
TV/Set-top Box/PC
Air Mouse
Experience
Supported
Motion Sensing
Authentic Vibration
Upgrade
Supported
Firmware Upgrade
Note: For mobile games, select Bluetooth mode to play on the cellphone;
For playing Android mobile games on computer simulator, select wireless Android mode;
For computer games, select Xinput mode.
4. Play Games on Android Cellphone and Tablet
(Bluetooth Mode)
1. Download Flydigi Gamepad Assistant
Scan QR code to download and install
2. Connect Controller
Step 1: Turn on power, press and hold Logo button for 5 seconds, then
controller goes into pairing mode (White Logo light flashing). If the light
is not white at this time, press and hold B+Logo buttons in sequence for 5
seconds, then it will be switched back to Bluetooth mode.
Press and hold for 5 seconds
Step 2: Click Settings – Bluetooth on the cellphone , turn on Bluetooth,
click on FeizhiX8 / X8 Pro of the search result and start pairing with
cellphone, after pairing is successful, white Logo light stays steadily on.
Note: For paired controller , it’s only necessary to press Logo button when reconnecting next time, not need to hold.
Click
3.2 Connect Utool in sequence following 1-5 as shown in the figure, red
light stays steadily on.
1 Cellphone
2 Data cable
3 Flydigi Utool
4 Charging plug
5 Socket
3.3 Allow USB debugging on the cellphone, click OK.
3.4 After completing activation, unplug the Flydigi Utool.
5. Play Games on Set-Top Box / Smart TV or PC Android
Simulator
(Wireless Android Mode)
Set-Top Box/Smart TV (TV Game)
1.Search TV app market and install in the TV browser.
2.Download games in the app market and install.
3.Plug receiver into the USB port of set-top box/smart TV.
4.Turn on power of controller, press and hold the A+Logo buttons in
sequence for 5 seconds, the controller will be switched to wireless
Android mode (Yellow Logo light stays steadily on). The controller will
connect to receiver.
A +
Press and hold A + Logo for 5 seconds
Note: If yellow Logo light keeps flashing slowly and unable to connect after switching
to wireless Android mode, the controller needs to be paired to the receiver:
1. First ensure that you have switched to yellow light mode.
2. Restart controller, press and hold Logo button for 5 seconds, the light will flash
quickly and the controller will enter pairing mode. Plug and unplug the receiver once
and keep the controller within 20cm from the receiver. If yellow Logo light flashes
slowly twice, then stays steadily on, it indicates successful pairing.
5. If the controller is not used for a period of time, it will enter standby
mode, press the Logo button again to turn it on.
Air Mouse Function (Only Supports Wireless Android Mode)
Air Mouse is a unique function of Flydigi controller that can utilize
controller to simulate mouse operation, to facilitate users to click like a
mouse anywhere as you wish.
After yellow Logo light stays steadily on, press Logo button to turn on /
off Air Mouse function. After it’s turned on, LT will be left mouse button.
Note: Use center point of controller as the axis, rotate it up and down and side to side,
so you can control the Air Mouse pointer movement.
6. Play Games on Computer
(Xinput Mode)
PC games can support controller without driver.
1. Plug receiver into computer USB port.
2. Turn on power of controller, press and hold the X+Logo buttons in
sequence for 5 seconds, the controller will be switched to Xinput
mode (Blue Logo light stays steadily on). The controller will connect
to receiver.
X +
Press and hold X+Logo buttons for 5 seconds
Note: If Blue Logo light keeps flashing slowly and unable to connect after switching to
Xinput mode, the controller needs to be paired to the receiver:
1. First ensure that you have switched to blue light mode.
2. Restart controller, press and hold Logo button for 5 seconds, the light will flash
quickly and the controller will enter pairing mode. Plug and unplug the receiver once
and keep the controller within 20cm from the receiver. If blue Logo light flashes slowly
twice, then stays steadily on, it indicates successful pairing.
3. If the controller is not used for a period of time, it will enter standby
mode, press the Logo button again to turn it on.
7. FAQ
Light of controller is off
First turn on the power switch and check whether the power is
sufficient. If there is electricity but Logo light is still off, please
contact customer service.
Problem with joystick and button
Controller testing can be done in the Gamepad Assistant.
Joystick calibration: Press and hold menu + back buttons of the
controller at the same time, Logo light flashes slowly twice to
complete calibration.
Shooting center will automatically drift if motion sensing of
controller is used in shooting games
If view angle cannot be controlled after pressing and holding the
LB button and swinging controller, please leave it on the desk for
10 seconds.
What if Utool activation is not successful?
1.The red light is flashing all the time: There may be a problem with
data cable or USB port of the cellphone. Please change and try
again (Some data cables can charge but cannot transmit data.)
2.Blue light is always flashing quickly or it is not on: Make sure USB
debugging is enabled and click OK in the popup box "Allow USB
debugging"; Unplug and plug in USB debugging data cable and
try again.
3.Still unable to activate after red and blue lights are steadily on:
Please restart the cellphone, wait a few minutes to try again.
4.Blue light is flashing slowly: You may have not installed Flydigi
Gamepad Assistant, please return to the first step to install the
App.
8. Performance Parameter
Platform
Supported
Android
Cellphone and tablet with OS of
Android 4.4 or above and Bluetooth
4.0
PC
Windows XP and above version OS
Wireless RF
2.4-2.483GHz, Bluetooth 4.0 BLE
Usage
Distance
>10m
Product Size
155.5x103.5x64.5mm
Operating
Current
Bluetooth
Mode
Operating current <4mA, after
enabling motion sensing, operating
current <8mA; standby current
<15uA
Wireless
Android
Mode
Operating current<8mA, standby
current<15uA
Xinput Mode
Operating current<8mA, standby
current<15uA
Rated Input
Charging Voltage: 5V. Charging current: <120mA
Working
Hours
80 hours under Bluetooth mode (motion sensing not
enabled)
40 hours under wireless Android mode/Xinput mode
Storage
Temperature
-20℃~+80℃
Working
Temperature
-5℃~+50℃
UM7104
Shanghai Flydigi Electronics Technology Co.,Ltd.
www.flydigi.com/en


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:03:29 10:05:37+08:00
Creator                         : Adobe Acrobat Pro 11.0.0
Modify Date                     : 2018:03:29 10:05:37+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:03:29 10:05:37+08:00
Creator Tool                    : Adobe Acrobat Pro 11.0.0
Format                          : application/pdf
Document ID                     : uuid:72364f7e-8097-4c58-ad2c-1f31a8edd430
Instance ID                     : uuid:5c5f549f-2bc7-4999-907a-6f27c77f9b3b
Producer                        : Adobe Acrobat Pro 11.0.0
Page Count                      : 13

EXIF Metadata provided by EXIF.tools