FlyDigi Electronics Technology X8 Flydigi X8 Pro Wireless Controller User Manual

Shanghai Flydigi Electronics Technology Co., Ltd. Flydigi X8 Pro Wireless Controller User Manual

User_Manual

Flydigi X8 Pro Wireless Controller User ManualModel No.: FeiZhi X8 ProFCC ID: 2AORE-X8
3. Controller ModeModeBluetooth ModeHold and press B+Logo buttons for 5 secondsWireless Android ModeHold and press A+Logo buttons for 5 secondsXinput ModeHold and press X+Logo buttons for 5 secondsConnection Method2.4G Wireless BluetoothSystem Supported AndroidDevice SupportedCellphone/TabletsTV/Set-top Box/PCExperience SupportedAir MouseMotion Sensing Authentic VibrationUpgrade Supported Firmware UpgradeNote: For mobile games, select Bluetooth mode to play on the cellphone;For playing Android mobile games on computer simulator, select wireless Android mode;For computer games, select Xinput mode.
4. Play Games on Android Cellphone and Tablet (Bluetooth Mode)1. Download Flydigi Gamepad Assistant2. Connect ControllerScan QR code to download and install Step 1: Turn on power, press and hold Logo button for 5 seconds, then controller goes into pairing mode (White Logo light flashing). If the light is not white at this time, press and hold B+Logo buttons in sequence for 5 seconds, then it will be switched back to Bluetooth mode.Step 2: Click Settings – Bluetooth on the cellphone , turn on Bluetooth, click on FeizhiX8 / X8 Pro of the search result and start pairing with cellphone, after pairing is successful, white Logo light stays steadily on.Note: For paired controller , it’s only necessary to press Logo button when re-connecting next time, not need to hold.Press and hold for 5 secondsClick
3.2 Connect Utool in sequence following 1-5 as shown in the figure, red light stays steadily on.CellphoneData cableFlydigi UtoolCharging plugSocket12345123453.3 Allow USB debugging on the cellphone, click OK.3.4 After completing activation, unplug the Flydigi Utool.
5. Play Games on Set-Top Box / Smart TV or PC Android Simulator (Wireless Android Mode)Set-Top Box/Smart TV (TV Game)Air Mouse Function (Only Supports Wireless Android Mode)1.Search TV app market and install in the TV browser. 2.Download games in the app market and install.3.Plug receiver into the USB port of set-top box/smart TV.4.Turn on power of controller, press and hold the A+Logo buttons in sequence for 5 seconds, the controller will be switched to wireless Android mode (Yellow Logo light stays steadily on). The controller will connect to receiver.Note: If yellow Logo light keeps flashing slowly and unable to connect after switching to wireless Android mode, the controller needs to be paired to the receiver:1. First ensure that you have switched to yellow light mode.2. Restart controller, press and hold Logo button for 5 seconds, the light will flash quickly and the controller will enter pairing mode. Plug and unplug the receiver once and keep the controller within 20cm from the receiver. If yellow Logo light flashes slowly twice, then stays steadily on, it indicates successful pairing.5. If the controller is not used for a period of time, it will enter standby mode, press the Logo button again to turn it on.Press and hold A + Logo for 5 secondsA+Air Mouse is a unique function of Flydigi controller that can utilize controller to simulate mouse operation, to facilitate users to click like a mouse anywhere as you wish.After yellow Logo light stays steadily on, press Logo button to turn on / off Air Mouse function. After it’s turned on, LT will be left mouse button.
Note: Use center point of controller as the axis, rotate it up and down and side to side, so you can control the Air Mouse pointer movement.PC games can support controller without driver. 1. Plug receiver into computer USB port.2. Turn on power of controller, press and hold the X+Logo buttons in sequence for 5 seconds, the controller will be switched to Xinput mode (Blue Logo light stays steadily on). The controller will connect to receiver. Note: If Blue Logo light keeps flashing slowly and unable to connect after switching to Xinput mode, the controller needs to be paired to the receiver:1. First ensure that you have switched to blue light mode.2. Restart controller, press and hold Logo button for 5 seconds, the light will flash quickly and the controller will enter pairing mode. Plug and unplug the receiver once and keep the controller within 20cm from the receiver. If blue Logo light flashes slowly twice, then stays steadily on, it indicates successful pairing.3. If the controller is not used for a period of time, it will enter standby mode, press the Logo button again to turn it on.Press and hold X+Logo buttons for 5 secondsX+6. Play Games on Computer (Xinput Mode)
7. FAQLight of controller is offFirst turn on the power switch and check whether the power is sufficient. If there is electricity but Logo light is still off, please contact customer service.Problem with joystick and buttonController testing can be done in the Gamepad Assistant.Joystick calibration: Press and hold menu + back buttons of the controller at the same time, Logo light flashes slowly twice to complete calibration.Shooting center will automatically drift if motion sensing of controller is used in shooting games If view angle cannot be controlled after pressing and holding the LB button and swinging controller, please leave it on the desk for 10 seconds.What if Utool activation is not successful?1.The red light is flashing all the time: There may be a problem with data cable or USB port of the cellphone. Please change and try again (Some data cables can charge but cannot transmit data.)2.Blue light is always flashing quickly or it is not on: Make sure USB debugging is enabled and click OK in the popup box "Allow USB debugging"; Unplug and plug in USB debugging data cable and try again.3.Still unable to activate after red and blue lights are steadily on: Please restart the cellphone, wait a few minutes to try again.4.Blue light is flashing slowly: You may have not installed Flydigi Gamepad Assistant, please return to the first step to install the App.1234
Platform SupportedAndroidCellphone and tablet with OS of Android 4.4 or above and Bluetooth 4.0 PC Windows XP and above version OSWireless RF 2.4-2.483GHz, Bluetooth 4.0 BLEUsage Distance >10mProduct Size 155.5x103.5x64.5mmOperating CurrentBluetooth ModeOperating current <4mA, after enabling motion sensing, operating current <8mA; standby current <15uAWireless Android ModeOperating current<8mA, standby current<15uAXinput Mode Operating current<8mA, standby current<15uARated Input Charging Voltage: 5V. Charging current: <120mAWorking Hours80 hours under Bluetooth mode (motion sensing not enabled)40 hours under wireless Android mode/Xinput modeStorage Temperature -20℃~+80℃Working Temperature -5℃~+50℃8. Performance Parameter
UM7104Shanghai Flydigi Electronics Technology Co.,Ltd.www.flydigi.com/en

Navigation menu