Flying Technology VIVID60B Wireless HandFree - Headset User Manual wireless User s Guide
Flying Technology Co., Ltd. Wireless HandFree - Headset wireless User s Guide
User Manual
Wireless headset
Please fit headset in your " Right ear " like picture
shown.
Wireless Station
Connect your Wireless Station to your mobile phone.
On/Off button
When your phone rings, please press On/Off button,
After conversation please press On/Off again to
switch off to save your batter energy.
Power Indicator:
Red colored LED indicates both Powered on
and Battery has energy.
Wireless Headset
Nokia 6210/62..series
Basic Specification
Transmission Power : 1.0 mW
Transmission Range: 3~5 M
Frequency : 2.4 Ghz
Stand By : 80 Hours
Talking Time: 80 Minutes
May 2001
Charge your Wireless Station
Plug your Phone Charger to one of the
2 charge sockets, you will then charge
your Wireless Station.
Mobile Phone Travel Charger
Mobile Phone Travel Charger
Charge you Headset
Mobile Phone Travel Charger
Charge you Wireless Station and Headset at same time.
Names
Exit
Back
Telecom
Back
Back
Back
Menu
1. Click "Menu"
Select
Options
2. Move down to " Profiles "
3. Then click " Select "
5. Then click " options "
4. High light " Headset "
Headset
Gerneral
Silent
OK
Personalise
6. Press " OK "
Select
Automatic
answer
8. Click " Select "
OK
On
off
9. High Light " ON "
10. Click " OK "
7. Move down to "Automatic
answer "
Additionally, How do I have
"Auto Answer" function ?
Sports Hook:
fasten Sports Hook to the
ears, if more fixedness required.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment
For Receiver :
On the FCC ID Label :
FCC ID + This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
In the User Manual:
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment
For unlicensed low power transmitter:
On the FCC ID Label :
FCC ID + This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
In the User Manual:
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment