Flyingvoice Technology FWR7202 VoIP Wireless Router User Manual
Flyingvoice Technology Co., Ltd. VoIP Wireless Router
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3076231 |
| Application ID | PR0G88n16jcXBA2cB4HUCQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 255.06kB (3188296 bits) |
| Date Submitted | 2016-07-26 00:00:00 |
| Date Available | 2016-07-26 00:00:00 |
| Creation Date | 2016-07-18 15:51:56 |
| Producing Software | doPDF Ver 7.3 Build 391 (unknown Windows version - Version: 6.3.9600 (x64)) |
| Document Lastmod | 2016-07-21 13:38:10 |
| Document Title | User Manual |
Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 The FWR7202 VoIP Wireless Router User’s Guide V1.0 The page 1 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Table of Contents Preface ....................................................................................................................................................................................................................................................................................................................4 LED Indicators and Connectors .............................................................................................................................................................................................................................................................................5 2.1 LED Indicators .......................................................................................................................................................................................................................................................................................6 2.2 Hardware Installation .............................................................................................................................................................................................................................................................................7 Voice Prompt ..........................................................................................................................................................................................................................................................................................................8 Configuring Basic Settings ................................................................................................................................................................................................................................................................................... 11 4.1 Two-Level Management....................................................................................................................................................................................................................................................................... 11 4.2 Accessing Web Page............................................................................................................................................................................................................................................................................. 11 4.2.1 From LAN port ............................................................................................................................................................................................................................................................................. 11 4.2.2 From WAN port............................................................................................................................................................................................................................................................................12 4.3 Webpage ...............................................................................................................................................................................................................................................................................................12 4.4 Setting up the Time Zone .....................................................................................................................................................................................................................................................................13 4.5 Setting up the Internet Connection .......................................................................................................................................................................................................................................................14 4.5.1 Static IP.........................................................................................................................................................................................................................................................................................15 4.5.2 DHCP ...........................................................................................................................................................................................................................................................................................15 4.5.3 PPPoE ...........................................................................................................................................................................................................................................................................................16 4.6 Setting up the Wireless Connection......................................................................................................................................................................................................................................................17 4.6.1 Enable Wireless and Setting SSID ................................................................................................................................................................................................................................................17 4.6.2 Encryption ....................................................................................................................................................................................................................................................................................18 4.7 Register .................................................................................................................................................................................................................................................................................................18 4.7.1 Get the Accounts ...........................................................................................................................................................................................................................................................................18 4.7.2 Connections ..................................................................................................................................................................................................................................................................................19 4.7.3 Configuration SIP from Webpage .................................................................................................................................................................................................................................................19 4.7.4 View the Register Status ...............................................................................................................................................................................................................................................................19 4.8 Make Call .............................................................................................................................................................................................................................................................................................20 4.8.1 Calling phone or extension numbers ............................................................................................................................................................................................................................................20 4.8.2 Direct IP calls ...............................................................................................................................................................................................................................................................................20 4.8.3 Call Hold.......................................................................................................................................................................................................................................................................................21 4.8.4 Blind Transfer ...............................................................................................................................................................................................................................................................................21 4.8.5 Attended Transfer .........................................................................................................................................................................................................................................................................21 4.8.6 Conference ....................................................................................................................................................................................................................................................................................21 Web Configuration ...............................................................................................................................................................................................................................................................................................22 5.1 Login.....................................................................................................................................................................................................................................................................................................22 5.2 Status ....................................................................................................................................................................................................................................................................................................24 5.3 Network&Security ................................................................................................................................................................................................................................................................................25 5.3.1 WAN.............................................................................................................................................................................................................................................................................................25 5.3.2 LAN ..............................................................................................................................................................................................................................................................................................28 5.3.3 DMZ/Port Forward .......................................................................................................................................................................................................................................................................29 The page 2 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.3.4 5.3.5 MAC Clone...................................................................................................................................................................................................................................................................................30 Multi WAN ...................................................................................................................................................................................................................................................................................31 5.4 Wireless ................................................................................................................................................................................................................................................................................................31 5.4.1 Basic .............................................................................................................................................................................................................................................................................................31 5.4.2 Security .........................................................................................................................................................................................................................................................................................33 5.4.3 WMM ...........................................................................................................................................................................................................................................................................................33 5.4.4 WPS ..............................................................................................................................................................................................................................................................................................33 5.4.5 Station list .....................................................................................................................................................................................................................................................................................34 5.4.6 Advanced ......................................................................................................................................................................................................................................................................................35 5.5 SIP Account ..........................................................................................................................................................................................................................................................................................36 5.5.1 SIP Settings ...................................................................................................................................................................................................................................................................................36 5.5.2 FXS ...............................................................................................................................................................................................................................................................................................37 5.5.3 VOIP QoS Setting.........................................................................................................................................................................................................................................................................38 5.6 Phone ....................................................................................................................................................................................................................................................................................................39 5.6.1 Preferences....................................................................................................................................................................................................................................................................................39 5.6.2 Dial Plan .......................................................................................................................................................................................................................................................................................40 5.6.3 Phonebook ....................................................................................................................................................................................................................................................................................41 5.6.4 Call Log ........................................................................................................................................................................................................................................................................................42 5.7 Security .................................................................................................................................................................................................................................................................................................43 5.7.1 Filtering Setting ............................................................................................................................................................................................................................................................................43 5.7.2 DMZ .............................................................................................................................................................................................................................................................................................44 5.7.3 MAC Clone...................................................................................................................................................................................................................................................................................44 5.7.4 Port Forward .................................................................................................................................................................................................................................................................................45 5.7.5 Content Filtering ...........................................................................................................................................................................................................................................................................46 5.8 Administration ......................................................................................................................................................................................................................................................................................47 5.8.1 Mnagement ...................................................................................................................................................................................................................................................................................47 5.8.2 Firmware Upgrade ........................................................................................................................................................................................................................................................................48 5.8.3 Provision .......................................................................................................................................................................................................................................................................................48 5.8.4 SNMP ...........................................................................................................................................................................................................................................................................................50 5.8.5 TR069 ...........................................................................................................................................................................................................................................................................................51 5.9 System Log ...........................................................................................................................................................................................................................................................................................51 5.10 Logout...................................................................................................................................................................................................................................................................................................52 5.11 Reboot...................................................................................................................................................................................................................................................................................................53 Trouble shooting of the guide ...............................................................................................................................................................................................................................................................................54 6.1 Setting your PC gets IP automatically ..................................................................................................................................................................................................................................................54 6.2 Can not connect to the configuration Website ......................................................................................................................................................................................................................................55 6.3 Forget the Password..............................................................................................................................................................................................................................................................................55 Statement ..............................................................................................................................................................................................................................................................................................................56 The page 3 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 1 Preface Thank you for choosing FW R7202 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection, and provides W i-Fi router function. This manual provides basic information on how to install and connect FW R7202 wireless router with VoIP to the Internet. It also includes features and functions of wireless router with VoIP components, and how to use it correctly. Before you can connect FW R7202 to the Internet and use it, you must have a high-speed broadband connection installed. A high-speed connection includes environments such as DSL, cable modem, and a leased line. FW R7202 wireless router with VoIP is a stand-alone device, which requires no PC to make Internet calls. This product guarantees clear and reliable voice quality on Internet, which is fully compatible with SIP industry standard and able to interoperate with many other SIP devices and software on the market. The page 4 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 2 LED Indicators and Connectors Before you use the high speed router, please get acquainted with the LED indicators and connectors first. The page 5 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 2.1 LED Indicators Front Panel LED PHONE1/2 W LAN LAN 1/2/3/4 W AN Status Explanation Blinking(Green) Not registered. On (Green) Registered On (Green) Wireless access point is ready. Blinking(Green) It will blink while wireless traffic goes through. On (Green) The port is connected with 100Mbps. Off The port is disconnected. Blinking(Green) The data is transmitting. On(Green) The port is connected with 100Mbps. Off The port is disconnected. Blinking(Green) It will blink while transmitting data. The router is powered on and running normally. On(Red) POW ER Off Rear Panel The router is powered off. Interface Description DC 12V1A Connector for a power adapter. PHONE1/2 Connect to the phone. W AN Connector for accessing the Internet. LAN (1/2/3/4) Connectors for local networked devices. The page 6 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 2.2 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. Step 1.Connect Line port to land line jack with a RJ-11 cable. Step 2.Connect the W AN port to a modem or switch or router or Internet with an Ethernet cable. Step 3.Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly. Step 4.Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity. Step 5.Check the Power and W AN, LAN LEDs to assure network connections. The page 7 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 3 Voice Prompt In any circumstance, pressing the following command to enter relevant function. The following table lists command, and description. Voice Menu Setting Options Operation code Contents Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “1”, and FWR7202 report the current WAN port connection type Step 3.Prompt "Please enter password”, user need to input password with end char # if user want to configuration WAN port connection type. The password in IVR is same as the one of WEB login, user can use phone keypad to enter password directly, and the matching table is in Note Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “2”, and FWR7202 report current WAN Port IP Address Step 3.Input the new WAN port IP address and with the end char #, using “*” to replace “.”, user can input 192*168*20*168 to set the new IP address 192.168.20.168 press # key to indicate that you have finished Step 4.Report “operation successful” if user operation properly. Note: If you want to quit by the wayside, press “**”. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “3”, and FWR7202 report current WAN port subnet mask Step 3.Input a new WAN port subnet mask and with the end char # using “*” to replace “.”, user can input 255*255*255*0 to set the new WAN port subnet mask 255.255.255.0 press # key to indicate that you have finished 3) Report “operation successful” if user operation properly. Note: If you want to quit by the wayside, press “**”. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “4”, and FWR7202 report current gateway Step 3.Input the new gateway and with the end char # using “*” to replace “.”, user can input 192*168*20*1 to set the new gateway 192.168.20.1 press # (pound) key to indicate that you have finished 3) Report “operation successful” if user operation properly. Note: If you want to quit by the wayside, press “**”. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “5”, and FWR7202 report current DNS Step 3.Input the new DNS and with the end char # using “*” to replace “.”, user can input 192*168*20*1 to set the new gateway 192.168.20.1 press # (pound) key to indicate that you have finished 3) Report “operation successful” if user operation properly. If you want to quit by the wayside, press “**”. The page 8 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “6”, and FWR7202 report “Factory Reset” Step 3.Prompt "Please enter password", the method of inputting password is the same as operation 1. If you want to quit by the wayside, press “*”. Step 4.Prompt “operation successful” if password is right and then FWR7202 will be factory setting. Step 5.Press “7” reboot to make changes effective. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “7”, and FWR7202 report “Reboot” Step 3.Prompt "Please enter password", the method of inputting password is same as operation 1. Step 4.FWR7202 will reboot if password is right and operation is properly. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “8”, and FWR7202 report “WAN Port Login” Step 3.Prompt "Please enter password", the method of inputting password is same as operation 1. If you want to quit by the wayside, press “*”. Step 4.Report “operation successful” if user operation properly. Step 5.Prompt “1enable 2disable”,choose 1 or 2, and with confirm char # Step 6.Report “operation successful” if user operation properly. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “9”, and FWR7202 report “ WEB Access Port” Step 3.Prompt “Please enter password”, the method of inputting password is same as operation 1. Step 4.Report “operation successful” if user operation properly. Step 5.Report the current WEB Access Port Step 6.Set the new WEB access port and with end char # Step 7. Report “operation successful” if user operation properly. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “0”, and FWR7202 report current Firmware version Notice: W hen using Voice Menu, press * (star) to return the main menu. If any changes made in the IP assignment mode, please reboot the FW R7202 to take the setting into effect. W hen enter IP address or subnet mask, use “*”(Star) to replace “.” (Dot). For example, to enter the IP address 192.168.20.159 by keypad, press these keys: 192*168*20*159,use the #(pound) key to indicate that you have finished entering the IP address. The page 9 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 #(pound) key to i ndicate that you have fi nish entering the IP address or subnet mask W hen assigning IP address in Static IP mode, setting IP address, subnet mask and default gateway is a must. If in DHCP mode, please make sure that DHCP SERVER is available in your existing broadband connection to which W AN port of FW R7202 is connected. The default LAN port IP address of FW R7202 is 192.168.1.1 and do not set the W AN port IP address of FW R7202 in the same network segment of LAN port of FW R7202, otherwise it may lead to the FW R7202 fail to work properly. You can enter the password by phone keypad, the matching table between number and letters as follows: To input: D, E, F, d, e, f -- press ‘3’ To input: G, H, I, g, h, i -- press ‘4’ To input: J, K, L, j, k, l -- press ‘5’ To input: M, N, O, m, n, o -- press ‘6’ To input: P, Q, R, S, p, q, r, s -- press ‘7’ To input: T, U, V, t, u, v -- press ‘8’ To input: W, X, Y, Z, w, x, y, z -- press ‘9’ To input all other characters in the administrator password-----press ‘0’, E.g. password is ‘admin-admin’, press ‘236460263’ The page 10 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 4 Configuring Basic Settings 4.1 Two-Level Management This chapter explains how to setup a password for an administrator/root user and how to adjust basic/advanced settings for accessing Internet successfully. FW R7202 supports two-level management: administrator and user. For administrator mode operation, please type “admin/admin” on Username/Password and click Login button to configuration. W hile for user mode operation, please type “user/user” on Username/Password and click Login button for full configuration. 4.2 Accessing Web Page 4.2.1 From LAN port 1. Make sure your PC have connected to the router’s LAN port correctly. Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of router is 192.168.1.1. For the detailed information, please refer to the later section - Trouble shooting of the guide. 2. Open a web browser on your PC and type http://192.168.1.1. The following window will be open to ask for username and password,and you can choose language. 3. For administrator mode operation, please type “admin/admin” on Username/Password and click Login to configuration. Yet, for root user mode operation, please type “user/user” on Username/Password and click Login for full configuration. The page 11 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. 4. The web page can be logged out after 5 minutes without any operation. 4.2.2 From WAN port 1. Make sure your PC can connect to the router’s W AN port correctly. 2. Getting the IP addresses of W AN port using Voice prompt. 3. Open a web browser on your PC and type http://the IP address of WAN port. The following window will be open to ask for username and password. 4. For administrator mode operation, please type “admin/admin” on Username/Password and click Login to configuration. Yet, for root user mode operation, please type “user/user” on Username/Password and click Login for full configuration. Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. 5. The web page can be logged out after 5 minutes without any operation. 4.3 Webpage The page 12 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 N o. Name Description Navigation bar C l i ck navigation bar, many sub-navigation bar will appear in the place 2 Title Click sub-navigation bar to choose one configuration page Parameter To configuration the parameters Every time making some changes, user should press this button to confirm the changes. After pressing the button, the red will appear to notice rebooting. To cancel the changes. Press it to reboot the router 4.4 Setting up the Time Zone Open Administration/Management webpage as shown below, please select the Time Zone for the router installed and specify the NTP server and set the update interval in NTP synchronization. The page 13 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 4.5 Setting up the Internet Connection Open the Network/WAN webpage as shown below; please select the appropriate IP Mode according to the information from your ISP. There are three types offered in this page, which are Static, DHCP and PPPoE. The page 14 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 4.5.1 Static IP You will receive a fixed public IP address or a public subnet, namely multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you have a public subnet, you could assign an IP address to the W AN interface. IP Address Type the IP address Subnet Mask Type the subnet mask Gateway IP Type the gateway IP address Address Primary DNS Type in the primary IP address for the Server route Secondary DNS Type in secondary IP address for Server necessity in the future 4.5.2 DHCP It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server. The page 15 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the DNS Mode primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Primary DNS Type in the primary IP address for the route Server Secondary DNS Type in secondary IP address for necessity in the Server future 4.5.3 PPPoE PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection. PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection for accessing the Internet. Your service provider will provide you information about user name, password, and authentication mode. The page 16 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Assign a specific valid user name PPPoE Account provided by the ISP Assign a valid password provided by PPPoE Password the ISP Confirm Input the password again Password Set the DNS Mode from Auto and Manual, If user choose manual, you should fill DNS Mode the primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Primary DNS Type in the primary IP address for the Server route Secondary DNS Type in secondary IP address for Server necessity in the future 4.6 Setting up the Wireless Connection To set up the wireless connection, please skip the following steps. 4.6.1 Enable Wireless and Setting SSID Open Wireless/Basic webpage as shown below The page 17 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Click the button to enable or disable wireless. Radio On/Off Press to disable wireless. Press to enable wireless. Network Mode Choose one network mode from the drop down list. Network The name of the wireless name, it can be any text Nmae(SSSID) numbers or various special characters. Multiple SSSD1-3 Set more wireless network. Frequency Choose channel frequency. 4.6.2 Encryption Open Wireless/Security webpage to set the encryption of routers. Choose one SSID from Off-premises 1, off-premises SSID Choice 2 and Premises. Select an appropriate encryption mode to improve the security and privacy of your wireless data Security Mode packets. Each encryption mode will bring out different web page and ask you to offer additional configuration. 4.7 Register 4.7.1 Get the Accounts FW R7202 have 2 phone port, you can use it to make SIP call, and before registering, you should get the SIP account from you administrator or provider. The page 18 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 4.7.2 Connections Connect FW R7202 to the Internet properly 4.7.3 Configuration SIP from Webpage Step 1.Open SIP Account/Line 1 webpage, as the picture i n the right side. Step 2.Fill the SIP Server domain and SIP Server address (which get from you administrator or provider) into Domain Name parameter, into SIP Server Step 3.Fill account which get from you administrator into Display Name parameter, Phone Number parameter, and Account parameter. Step 4.Fill password which get from you administrator into Password parameter. Step 5.Press Note: if there is changes effective. button in the bottom of the webpage to save changes. , please press button to make 4.7.4 View the Register Status To view the status, please open Status webpage and view the value of register status. The value is registered like the following picture which means FW R7202 have registered normally and you can make calls. The page 19 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 4.8 Make Call 4.8.1 Calling phone or extension numbers To make a phone or extension number call: a) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) have public IP addresses, or b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) can be connected through a router using public or private IP addresses. To make a call, first pick up the analog phone or turn on the speakerphone on the analog phone, input the IP address directly, end with #. 4.8.2 Direct IP calls Direct IP calling allows two phones, that is, an ATA with an analog phone and another VoIP Device, to talk to each other without a SIP proxy. VoIP calls can be made between two phones if: a) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) have public IP addresses, or b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) can be connected through a router using public or private IP addresses. The page 20 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 To make a direct IP call, first pick up the analog phone or turn on the speakerphone on the analog phone, Input the IP address directly, with the end “#”. 4.8.3 Call Hold W hile in conversation, pressing the “*77” to put the remote end on hold, then you will hear the dial tone and the remote party will hear hold tone at the same time. Pressing the “*77” again to release the previously hold state and resume the bi-directional media. 4.8.4 Blind Transfer Assuming that call party A and party B are in conversation. A wants to Blind Transfer B to C: Step 1.Party A dials “*78” to get a dial tone, then dials party C’s number, and then press immediately key # (or wait for 4 seconds) to dial out. Step 2.A can hang up. 4.8.5 Attended Transfer Assuming that call party A and B are in conversation. A wants to Attend Transfer B to C: Step 1.Party A dial “*77” to hold the party B, when hear the dial tone, A dial C’s number, then party A and party C are in conversation. Step 2.Party A dial “*78” to transfer to C, then B and C now in conversation. Step 3.If the transfer doesn’t success, then A and B in conversation again. 4.8.6 Conference Assuming that call party A and B are in conversation. A wants to add C to the conference: Step 1.Party A dial “*77” to hold the party B, when hear the dial tone, A dial C’s number, then party A and party C are in conversation. Step 2.Party A dial “*88” to add C, then A, B and C now in conference. The page 21 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5 Web Configuration This chapter will guide users to execute advanced (full) configuration through admi n mode operation. 5.1 Login Step 1.Connect the LAN port of the router to your PC Step 2.Open a web browser on your PC and type in http://192.168.1.1. The window will ask for typing username and password. And you can choose language, too. W hen login successfully, the webpage shows the basic information about the router, such as the current W AN IP, DNS server IP, W AN port connection mode, W AN link status, wireless SSID, wireless channel and F/W version Step 3.Please type “admin/admin” on Username/Password for administration operation. Now, the Mai n Screen will appear like below. The page 22 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 The page 23 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.2 Status This webpage shows the status information about product information, Network and system. It shows the basic information of the product, such as product name, serial number, MAC address, hardware version and software version. It also shows the information of Link Status, W AN Port Status, and LAN Port Status. And it shows the current time and the runni ng time of the product. The picture in the right side is the FW R7202’s Status webpage. The page 24 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.3 Network&Security You can configuration the W AN port, LAN port, DDNS, Multi W AN,DMZ, MAC Clone,Port Forward and so on in these two bars. 5.3.1 WAN This page allows you to set W AN configuration with different modes. Use the Connection Type drop down list to choose one W AN mode and then the corresponding page will be displayed. Static IP: You will receive a fixed public IP address or a public subnet, namely multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you have a public subnet, you could assign an IP address to the W AN interface. IP Address Type the IP address Subnet Mask Type the subnet mask Gateway IP Type the gateway IP address Address Primary DNS Type in the primary IP address for the route Server Secondary DNS Type in secondary IP address for necessity in the Server future DHCP : It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server. The page 25 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the DNS Mode primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Type in the primary IP address for the Primary DNS Server route Type in secondary IP address for Secondary DNS Server necessity in the future PPPoE: PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection. PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection for accessing the Internet. Your service provider will provide you information about user name, password, and authentication mode. The page 26 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 PPPoE Account Assign a specific valid user name provided by the ISP PPPoE Password Assign a valid password provided by the ISP PPPoE Auto-Dial If or not enable PPPoE Password. Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS DNS Mode address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Primary DNS Server Type in the primary IP address for the route Secondary DNS Server Type in secondary IP address for necessity in the future DDNS Setting Use the drop down list to select one DDNS Provider DDNS Provider domain DDNS Account Fill in the DDNS account. DDNS Password Fill in the DDNS Password. DDNS Name Fill in the DDNS name. The page 27 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.3.2 LAN LAN Port: The most generic function of router is NAT. W hat NAT does is to translate the packets from public IP address to local IP address to forward the right packets to the right host and vice versa. Type in local IP address for connecting to a local private Local IP Address network (Default: 192.168.1.1) Type in an address code that determines the size of the Local Subnet Mask network. (Default: 255.255.255.0/ 24) If or not enable DHCP server. Local DHCP Server DHCP Server: Router has a built-in DHCP server that assigns private IP address to each local host. DHCP stands for Dynamic Host Configuration Protocol. The router by factory default acts a DHCP server for your network so it automatically dispatch related IP settings to any local user configured as a DHCP client. It is highly recommended that you leave the router enabled as a DHCP server if you do not have a DHCP server for your network. Local DHCP Server If or not enable DHCP server. DHCP Starting Enter a value of the IP address pool for the DHCP server to start Address with when issuing IP addresses. If the LAN Interface IP DHCP Ending Enter a value of the IP address pool for the DHCP server to end The page 28 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Address with when issuing IP addresses. Primary/Secondary Input the primary or secondary DNS IP address. DNS You must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Primary DNS Server. If your ISP does not provide it, the router will automatically apply default DNS Server IP address: 202.96.134.33 to this field. You must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Server. If your ISP does not provide it, the router will automatically apply default DNS Server IP address: Secondary DNS 202.96.128.86 to this field. If both the Primary IP and Secondary IP Address fields are left empty, the router will assign its own IP address to local users as a DNS proxy server and maintain a DNS cache. Client Lease Time It allows you to set the leased time for the specified PC. 5.3.3 DMZ/Port Forward DM Z DMZ Enable If or not enable DMZ. DMZ Host IP Enter the private IP address of the DMZ host Address The page 29 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Port Forward 5.3.4 MAC Clone Some ISPs will require you to register your MAC address. If you do not wish to re-register your MAC address, you can have the router clone the MAC address that is registered with your ISP. To use the Clone Address button, the computer viewing the W eb-base utility screen will have the MAC address automatically entered in the Clone W AN MAC field. The page 30 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Step 1.Press button to clone the currently PC MAC address to router’s Internet port. Step 2.Press Step 3.Press button to save the changes button to make changes effective 5.3.5 Multi WAN Note: Muti-wan only used in WAN connection mode,not in LTE mode 5.4 Wireless 5.4.1 Basic The page 31 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 Select Radio On to enable the wireless, select Radio Off Radio On/Off to disable wireless. Network Mode Choose one network mode from the five types. The name of the wireless name, it can be any text SSID numbers or various special characters. The default SSID is "Wireless_7202". Multiple User can set multiple SSID. SSID1-3 broadcast(SSID) If or not enable SSID broadcast. The page 32 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.4.2 Security Choose one SSID from SSID, Multiple SSID1, SSID Choice Multiple SSID2 and Multiple SSID3. Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Security Mode Each encryption mode will bring out different web page and ask you to offer additional configuration. 5.4.3 WMM 5.4.4 WPS W PS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of W PA and W PA2. It is the simplest way to build connection between wireless network clients and vigor router. Users do not need to select any encryption mode and type any long encryption passphrase to setup a wireless client every time. He/she only needs to press a button on wireless client, and W PS will connect for client and router automatically. The page 33 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 WPS If or not enable WPS. Press the button to apply. 5.4.5 Station list The page 34 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.4.6 Advanced The page 35 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.5 SIP Account 5.5.1 SIP Settings The page 36 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.5.2 FXS The page 37 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.5.3 VOIP QoS Setting The page 38 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.6 Phone 5.6.1 Preferences The page 39 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.6.2 Dial Plan The page 40 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.6.3 Phonebook The page 41 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.6.4 Call Log The page 42 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.7 Security 5.7.1 Filtering Setting The page 43 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.7.2 DMZ 5.7.3 MAC Clone The page 44 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.7.4 Port Forward The page 45 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.7.5 Content Filtering The page 46 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.8 Administration 5.8.1 Mnagement The page 47 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.8.2 Firmware Upgrade 1) Choose upgrade file type from Image File and Dial Rule 2) Press 3) Press to browser file. to start upgrading. 5.8.3 Provision Please refer to the provision user manual to test provision. The page 48 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 The page 49 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.8.4 SNMP The page 50 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.8.5 TR069 5.9 System Log If you enable the system log in Status/syslog webpage, you can view the system log in this webpage. The page 51 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.10 Logout Press the logout button to logout, and then the login window will appear. The page 52 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 5.11 Reboot Press the Reboot button to reboot FW R7202. The page 53 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 6 Trouble shooting of the guide 6.1 Setting your PC gets IP automatically Following are the process of setting your PC gets IP automatically Step 1.Click the “begin” Step 2.Select “control panel”, then double click “network connections” in the “control panel” Step 3.Right clicks the “network connection” that your PC uses, select “attribute” and you can see the i nterface as picture 1: Step 4.Select “Internet Protocol (TCP/IP)”, click “attribute” button, and you can see the interface as following Picture 2 and you should click the “Get IP address automatically”. Picture 1 Picture 2 The page 54 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 6.2 Can not connect to the configuration Website Solution: Check if the Ethernet cable is properly connected, then Check if the URL is right wrote, the format of URL is: http:// the IP address: 8080, 8080 must be added, then Check if the version of IE is IE8, or use other browser such as Firefox or Mozilla, then Contact your admi nistrator, supplier, or ITSP for more information or assistance. 6.3 Forget the Password If user changed the password and then forgot, you can not access to the configuration website. Solution: To factory default: press reset button 10s. The page 55 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 7 Statement FCC Radiation Exposure Statement FlyingVoice Technology Ltd. Declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, many cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The page 56 of 57 Revision time: 2016-02-24 18:00 Copy Right 2016 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.0 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. The page 57 of 57 Revision time: 2016-02-24 18:00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Create Date : 2016:07:18 15:51:56+08:00 Modify Date : 2016:07:21 13:38:10+08:00 Metadata Date : 2016:07:21 13:38:10+08:00 Producer : doPDF Ver 7.3 Build 391 (unknown Windows version - Version: 6.3.9600 (x64)) Format : application/pdf Document ID : uuid:866e10cc-33f9-48fe-8eb3-5e743c20cc30 Instance ID : uuid:feba407f-7f56-4df4-89e7-4b3e7a2ac7bf Page Layout : OneColumn Page Mode : UseNone Page Count : 57EXIF Metadata provided by EXIF.tools