Focus Electronic Co RK750 Wireless Keyboard with Trackball User Manual RK750 Vista MCE Spec Model 1

Download:
Mirror Download [FCC.gov]
Document ID	1114161
Application ID	JHdMM4vqWr68BlbX9NONNA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.24kB (840471 bits)
Date Submitted	2009-05-21 00:00:00
Date Available	2009-05-21 00:00:00
Creation Date	2009-04-15 17:56:23
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-04-15 17:56:54
Document Title	RK750 Vista MCE Spec Model (1)
Document Creator	PScript5.dll Version 5.2
Document Author:	wilson

RK-750 User's Manual
\WlfitflufiUfCUU ; ; H‘flfl‘flfl’fl‘flfl’flflfl
Introduction:
RK—750 radio wireless mini keyboard is one of best
computer input devices in the market today.
It combines the convenience of radio frequency
wireless and the trackball with two sets of mouse
keys and scroll wheel.
As no cables connected to the keyboard, YOU can
put it away to save space when you finish usmg it.
RK—75O is ergonomically designed allowing for
comfortable use on table or lap.
Please read carefully the information and instructions
contained in this manual and you are sure obtain a
higher level of computing enjoyment.
Specification:
keyboard:
- 2.4GHz with 8 channels.
- Working Range: 10 meters.
- 4 AA batteries, approx. 3 months battery life
(please only use alkali batteries)
- Compatible with Windows 95/98/Me/NT/2000/XP
and Vista
— Energy saving management.
- 10 million key switch life.
- Number of keys: 86/87 keys, 5 MCE Hot Keys
and 12 Internet/Multimedia Hot Keys.
Trackball:
— Optical trackball
- 800 DPI
- 3 Mouse Buttons
- Scroll Wheel
Installation:
1.Turn on the computer.
2.Plug the RF Receiver of the keyboard into the USB
ports of your computer
3.0pen the battery cover under the keyboard and
place 4 AA batteries inside the battery compartment
Close the battery compartment cover.
4.Setting ID:
a.The distance between keyboard and receiver sure
be in one meter.
b.Press the ID button on the bottom side of the keyboard.
The LED will flashing 3 seconds, indicating that the
USB receiver has detected a signal and that the
keyboard and trackball are ready to use.
ID Button
?°@°<
Keys Description:
Internet Hot Keys: Multimedia Hot Keys:
BackForwardWeb HomeE-Mail ClaIy/PauDse,Sto\7,l|3re—Trackl\.ANTxt—Track
My Computer 0 ume own, 0 ume Up. u e
MCE Hot Keys: Batte Low
My TV/My Vedio/My Picture W
My Music/Live TV Power SW
[—
Mouse Left Key
- F
Scroll Wheel , ,
’ Optical Trackball
Mouse Lelt Key [I
Notice:
1.RF signal LED on the receiver will flash when the
keyboard/trackball is being used.
2.When Battery Low LED lights, it means the
keyboard requires a change of batteries.
Trouble Shooting:
If your keyboard can not work after installation,
please check followings:
a).Make sure you have connected the receiver
correctly to the computer. The receiver has
been properly plugged onto computer’s
USB ports.
b).Make sure you have inserted four AA
batteries into its compartment correctly.
c).lf without any interference, such as other
computer peripherals,the working distance
(the distance between keyboard and the
receiver) is about 10 meters.
d).lf using more than two units and interfere
occurred, please reset ID again.
Notice:
The changes or modifications not expressly approved
by the party responsible for compliance could void
the user authority to operate the equipment.
IM PO RTANT NOTE
To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure
requirements and void user authority to operate the
device.
FCC IN FORMATION
The Federal Communication Commission Radio
Frequency Interference Statement includes the following
paragraph:
The equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause
harmful interference to radio communication. However,
there is no grantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receeiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2009:04:15 17:56:54+08:00
Create Date                     : 2009:04:15 17:56:23+08:00
Title                           : RK750 Vista MCE Spec Model (1)
Author                          : wilson
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 5
Mod Date                        : 2009:04:15 17:56:54+08:00
Creation Date                   : 2009:04:15 17:56:23+08:00
Metadata Date                   : 2009:04:15 17:56:54+08:00

EXIF Metadata provided by EXIF.tools