Foneric Electronics PM1 VOCOlinc PM1 Smart Outlet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3749239
Application ID	aKVB8PuPQDKdyi/3WnAX0g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	112.45kB (1405664 bits)
Date Submitted	2018-02-11 00:00:00
Date Available	2018-02-11 00:00:00
Creation Date	2018-01-31 16:00:08
Producing Software	福昕PDF编辑器打印机 版本 8.3.0.0331
Document Lastmod	2018-01-31 16:00:08
Document Title	User manual

Model:PM1
Product Overview:
PM1 Wi-Fi Smart Power Outlet can be controlled through Wi-Fi wireless network. You
can switch on/off outlet and monitor its status wirelessly. The built-in night light
provides adjustable and caring white light that eases night time movement. The
built-in power meter allows you to track power consumption of a specific light or
appliance on LinkWise App.
1 LED indicator
2 Power/ Reset Button
3 Nightlight
Wi-Fi/Power status
Quick press to switch on/off
Press & hold for about 5 seconds to factory reset.
All connection data will be cleared. PM1 must be
removed from the app and then added back again.
White light; adjustable brightness on app
LED Status Indication
Status
LED Indicator
Search Wi-Fi
Green light flashing quickly
Adding a device
Green light flashing slowly
A device added successfully
Nightlight flashing slowly 5 times
Discovering a device
Nightlight flashing slowly 5 times
Connected to Wi-Fi (Outlet On)
Green light staying on
Connected to Wi-Fi (Outlet Off)
LED off
Disconnected from Wi-Fi
Red light flashing quickly
Reset
Press & Hold for 5s, then green flashing quickly
OTA in Progress
Red light flash slowly
OTA done
Nightlight flashing slowly 5 times
What’s Included:
PM1 Smart Wi-Fi Outlet
Quick Start Guide
Features:

Smart AC outlets

Energy monitoring

Nightlight

Works with Apple HomeKit

Works with Amazon Alexa

Works with Google Home

Can be applied to local or remote control of appliances such as fans, lights, water
coolers, heaters, rice cookers and more
Electrical Ratings
Smart AC Outlet
Input: AC100~125V, 60Hz
Output: AC100~125V, 10A Max, 1200W Max (Pure Resistive Load)
General use ONLY
Indoor dry location use ONLY
Safety Warnings










Plug directly into electric outlet (not into extension cord)
For indoor use only
Unplug from outlet before cleaning
DO NOT clean with liquid
DO NOT remove ground pin (round pin) as there is risk of electric shock
DO NOT use in wet or damp areas
Keep children away from PM1
DO NOT exceed the recommended electrical ratings
DO NOT use in precision timing applications where inaccurate timing could be
dangerous (sunlamps, saunas, etc.)
DO NOT use with devices that should not be operated unattendedly

After switching off the the main power, DO NOT operate until the main power
indicator goes completely off (about 2 seconds delay)

DO NOT use the device when the casing is broken
Quick Start Guide
For iOS user
1.
2.
3.
4.
5.
6.
Download and open the free VOCOlinc LinkWise app from the Apple App Store.
Plug PM1 into a desired outlet. Press & Hold the Reset Button for about 5
seconds. Once the LED indicator starts blinking green, it is ready for network
setup.
Make sure your iPhone or iPad (version 10.3 or later) is connected to a 2.4GHz
Wi-Fi network. If you are connected to a 5GHz Wi-Fi network, use the router utility
software to turn it off during setup.
Log in or sign up for a VOCOlinc account (required for linking VOCOlince Cloud
and 3rd Party Connection).
Tap “+” on the top left corner and follow the on-screen directions to complete
network setup.
Note: To add more devices (or repeat PM1 setup process), tap “+” and you will be
asked to scan the setup code or manually enter the setup code.
Select the device from the accessory list. Each accessory has an unique
identification code, e.g., Vocolinc-XXX-XXXXXX. Make sure the last 6 characters
of the identification code is consistent with the last 6 characters of MAC at the
backside of your PM1.
If the screen shows “Couldn’t add Vocolinc-XXX-XXXXXX”, please refer to the
first FAQ. Please preserve the setup code for future use.
7.
8.
Note: if you are running a lower version than iOS 11, make sure to swap do step 6
before step 5.
You can assign a name to your device and use this name when speaking to Siri.
For example, if you name your device “printer”, you may wake up Siri and say
“Turn on the Printer”.
Set up customized scenes to control multiple devices with a single command. For
example, if you name the scene that turns off all the lights “I’m going to bed”,
when you wake up Siri and say “I’m going to bed”, it will do the job.
The use of a HomeKit-enabled accessory need the follow permissions:
Settings > iCloud > iCloud Drive > Turn On
Settings > iCloud > Keychain > Turn On
Settings > Privacy > HomeKit >LinkWise> Turn On
For Android user
The Android version of LinkWise is a Cloud-based app, which requires an active
internet connection.
1.
2.
3.
4.
5.
6.
7.
Download and open the free VOCOlinc LinkWise app from the Google Play
Store.
Plug PM1 into a desired outlet. Press & Hold the Reset Button for about 5
seconds. Once the LED indicator starts blinking green, it is ready for network
setup.
Make sure your Android device (version 4.3 or later) is connected to a 2.4GHz
Wi-Fi network. If you are connected to a 5GHz Wi-Fi network, use the router utility
software to turn it off during setup.
Log in or sign up for a VOCOlinc account (required for Alexa/Google
configuration).
Tap “+” on the top left corner and follow the on-screen directions to complete
network setup.
You can assign a name to your device.
In case of setup failure, factory reset the device and repeat steps 2-6.
3rd Party Connection
To Enable Amazon Alexa and/or Google Home, refer to the following instruction.
Enabling Alexa
1. Download and Install the Alexa App and login with your Amazon account.
2. Create an account in the LinkWise App (username and password are case
sensitive) and login to your account.
3. Go to LinkWise App > long press the device icon to enter the menu. Look for
"VOCOlinc Cloud". Tap " " icon to link device to VOCOlinc cloud.

4. Go to User > Amazon Alexa > follow the steps to set up Alexa on the Alexa App or
press “Get Started” to set up Alexa on its webpage.

5. Use VOCOlinc account to enable Alexa skill: VOCOlinc.

6. Discover Devices in the Alexa App.


If you change the name of the device in LinkWise App, you may sync the new
name in the Alexa App by re-discovering devices.
Alexa Skills
1. “Alexa, turn on (name)”
2. “Alexa, turn off (name)”
Enabling Google Assistant
1. Download and install the Google Assistant App and login with your Google
account.
2. Create an account in the LinkWise App (username and password are case
sensitive) and login to your account.
3. Go to LinkWise App > long press the device icon to enter the menu. Look for
"VOCOlinc Cloud". Tap " " icon to link device to VOCOlinc cloud.

DO NOT assign names with similar pronunciation or names such “Outlet 1”, or ”Light
Bulb 1”, etc. It is challenging to control.
4. Go to User > Google Assistant > follow the steps to set up Google on the
Alexa App or press “Get Started” to visit the Google Assistant App.

5. Use VOCOlinc account to enable Google Action: VOCOlinc.
Go to Settings > Home control > Press “+” > Enable action using your VOCOlinc
account.




6. Complete setup

Timer Settings
You may schedule to turn on/off the device at specific times on specific days of the
week,or to slowly wake you up in the morning.
Go to LinkWise APP > Long press the device icon to enter the menu > Look for
“Timer” >Go to settings to create an event > Enable your preferred state for the device
and name the event.

Energy Monitoring
With a built-in energy usage monitoring technology, you can acquire energy usage
report (real-time, daily, monthly, annual) at your fingertips via the free LinkWise app.
Go to LinkWise APP > Long press the device icon to enter the menu > Look for
“Energy”>1. Check real time consumption. 2. Enter per unit energy cost to get a report
on monthly and annual total expenses.

Factory Resetting
Resetting the device can help you troubleshoot any issues you may have. To reset it
to factory defaults,press & hold main power button for about 5 seconds.
Firmware Update
To gain better experience with PM1, we strongly recommend that you update the
firmware whenever updates with all the latest improvement and fixes are available:
1. Launch LinkWise.
2. Long press device icon to enter the menu.
3. Look for “Firmware update” and tap it, and then tap “Update”.
*Only the devices that are currently reachable and have an available update will
prompt firmware update notice.
*It is important to leave the LinkWise app running while it finishes updating the device.
Try not to minimize the app, close the app, or interrupt the update to prevent
problems.
FAQ
Q1. Why did I fail to add my PM1 to the LinkWise App?
1.
2.
3.
4.
5.
6.
Make sure your accessory is powered on and nearby.
If you use a dual 2.4G/5G network router, please turn off the 5G network. Connect
your phone with 2.4G network and add the device again.
Make sure that the router setting meets the relevant requirements. The device
only supports the mode of WPA/WPA2-PSK.
Make sure that the Status indication LED (green light) flashes quickly. If not,
please press & hold the Reset Button for about 5s to restore factory settings.
Select the accessory shown on screen, then scan the setup code (XXX-XX-XXX)
which can be found on the device, instruction manual or inner packaging.
If the app prompts “Couldn’t add VOCOlinc-PM1-XXXXXX” after you scanning
the setup code:
(1)
(2)
(3)
(4)
7.
Close the app
Reboot the phone
Restore to factory settings
Add the device again
If the app prompts “The setup code is incorrect” , please
(1) Double check whether the setup code input is right or not; or try manually
entering the setup code.
(2) If the last 6 characters of the identification code is not consistent with the last
6 characters of MAC located at the bottom of your PM1, please report this
issue by sending a message to support@VOCOlinc.com along with the last
6 characters of the identification code.
8.
If the app prompts “This accessory isn’t compatible with your Wi-Fi router.”, It
means the router is currently working under the 5GHz network, please refer to
step 2.
Q2. How can I recover connection of the device?
1. Modification of the router configuration/settings will cause non-resumable
disconnection of the device. Delete and add the devices again after factory reset
following steps in Q1.
2. Unstable network signal could cause disconnection of the device. Wait for about 2
minutes for automatic re-connection. If the connection does not resume after
awhile, power off PM1 and then put it back on. It shall re-connect automatically.
3. If the above is not effective, delete and add the devices again after factory reset
following steps in Q1.
If you have more questions, please feel free to contact us: support@vocolinc.com.
Q3. The device works normally after restoring factory settings or
unplugging/plugging, but it occasionally gets disconnected from the network
and cannot be recognized.
1. Make sure the number of Wi-Fi connected devices is within the wireless network
capacity of your router. Otherwise, please replace with another router.
2. Reconnect your iOS devices to Wi-Fi and make sure your Wi-Fi signal is strong
enough.
3. Wait until the network is fixed if your router performs poorly in wireless networks
that might result from network congestion.
4. Check the router setting and see if there is any limit to the number of simultaneous
client connections.
5. Restart your HomeKit accessory or restore your HomeKit accessory to factory
settings, and add your HomeKit accessory to the VOCOlinc LinkWise app.
6. Update LinkWise App and product firmwares to the latest version.
Q4. Why am I not able to login to my VOCOlinc account?
username and password are case sensitive in VOCOlinc account system. Pay
attention to the upper/lower-case of the user name and password when you
login/sign up to the LinkWise app.
System Requirement:
Mobile device running iOS10.3+ or Android 4.3+
-
Existing Wi-Fi network
Stable Internet (For Android LinkWise & Alexa)
Legal Information
Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. HomeKit is a trademark of Apple Inc.
Use of the Works with Apple HomeKit logo means that an electronic accessory has
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and
regulatory standards.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.3 or later or an iPad with iOS 10.3 or later set up
as a home hub.
To control this HomeKit-enabled accessory, iOS 10.3 or later is recommended.
FCC Declaration
Caution:
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse
y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce
que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’
antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au
moins 20 cm des personnes pendant son functionnement

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 15
Author                          : 
Create Date                     : 2018:01:31 16:00:08+08:00
Creator                         : 
Modify Date                     : 2018:01:31 16:00:08+08:00
Producer                        : 福昕PDF编辑器打印机 版本 8.3.0.0331
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools