Foneric Technology VP1 VOCOlinc SmartBar Smart Outlet User Manual

Foneric Technology Co.,Ltd. VOCOlinc SmartBar Smart Outlet

User manual

Download: Foneric Technology VP1 VOCOlinc SmartBar Smart Outlet User Manual
Mirror Download [FCC.gov]Foneric Technology VP1 VOCOlinc SmartBar Smart Outlet User Manual
Document ID4112939
Application IDzcKJmVk6R4rynw/EJwXP+A==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.58kB (269746 bits)
Date Submitted2018-12-21 00:00:00
Date Available2018-12-21 00:00:00
Creation Date2018-12-07 17:18:34
Producing Software福昕PDF编辑器打印机 版本 8.3.0.0331
Document Lastmod2018-12-21 08:48:58
Document TitleUser manual

Product Overview:
SmartBar Wi-Fi Smart Power Outlet can be controlled through Wi-Fi wireless network.
You can switch on/off outlet and monitor its status wirelessly on LinkWise App.
1 Power/ Reset Button
Short Press:switching outlets on/off
Press &hold for about 5 seconds: factory reset
2 Status indication LED
Indicate Wi-Fi/Power status
LED Indicators Status
Status
Status indication LED status
Search Wi-Fi
Red Flashing quickly
Adding a device
Red Flashing slowly
A device added Sucessfully
Blue flashing slowly 5 times
Discovering a device
Blue flashing slowly 5 times
Connected to Wi-Fi(Outlet On)
Red stay on
Connected to Wi-Fi(Outlet Off)
Indication LED stay off
Disconnected from Wi-Fi
Blue flashing fastly
Reset
Press & Hold for 5s, then Red flashing fastly
OTA in Progress
Blue Flash slowly
OTA done
Blue flashing slowly 5 times
What’s Included:
Wi-Fi Smart Power Outlet
User Guide
Features:

Independent smart outlets and LED indicators

Work with Apple HomeKit

Work with Amazon Alexa

Can be applied to local or remote control of fans, lights, water coolers, heaters,
and rice cookers etc.
Electrical Ratings
1 x Smart AC Outlet
Input: AC100~125V, 60Hz
Output: AC100~125V, 15A Max, 1800W Max (Pure Resistive Load)
General use
Safty Warnings










Plug directly into electric outlet (not into extension cord)
For indoor use only
Remove Smart Plug from outlet before cleaning
DO NOT clean with liquid
DO NOT remove ground pin (middle pin) as there is risk of electric shock
DO NOT use in wet or damp areas
Keep children away from Smart Plug and outlet
DO NOT exceed the recommended electrical ratings
DO NOT use in precision timing applications where inaccurate timing could be
dangerous
(sunlamps, saunas, etc.)
DO NOT use with devices that should not be operated unattended.

After switching off the the main power, DO NOT operate until the main power
indicator goes completely off (about 2 seconds delay)

DO NOT use the device when the casing is broken
Quick Start Quide
For iOS User
Before starting, make sure your device is connected to Internet.
1.
2.
3.
4.
5.
6.
7.
Download and open the free VOCOlinc LinkWise app from the Apple App Store.
Plug SmartBar into a desired outlet. Press & Hold the Reset Button for about 5
seconds. Once the LED indicator starts blinking Red, it is ready for network setup.
Make sure your iPhone or iPad (version 12.0 or later) is connected to a 2.4GHz
Wi-Fi network. If you are connected to a 5GHz Wi-Fi network, use the router utility
software to turn it off during setup.
Tap “+” on the top left corner and follow the on-screen directions to complete
network setup.
Note: To add more devices (or repeat SmartBar setup process), tap “+” and you
will be asked to scan the setup code or manually enter the setup code.
Select the device from the accessory list. Each accessory has a unique
identification code, e.g., VOCOlinc-XXX-XXXXXX. Make sure the last 6 characters of
the identification code is consistent with the last 6 characters of MAC at the
backside of your SmartBar.
If the screen shows “Couldn’t add VOCOlinc-XXX-XXXXXX”, please refer to the first
FAQ. Please preserve the setup code for future use.
You can assign a name to your device and use this name when speaking to Siri.
For example, if you name your device “printer”, you may wake up Siri and say
“Turn on the Printer”.
Setup customized scenes to control multiple devices with a single command.
For example, if you name the scene that turns off all the lights “I’m going to bed”,
when you wake up Siri and say “I’m going to bed”, it will do the job. The use of a
HomeKit-enabled accessory need the follow permissions:
Settings > iCloud > iCloud Drive > Turn On
Settings > iCloud > Keychain > Turn On
Settings > Privacy > HomeKit > LinkWise > Turn On
Monitor AC status
If the AC outlet insert plug, the outlet icon display a tick.
Legal Information
Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. HomeKit is a trademark of Apple Inc.
Use of the Works with Apple HomeKit logo means that an electronic accessory has
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and
regulatory standards.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.3 or later or an iPad with iOS 12 or later set up as
a home hub.
To control this HomeKit-enabled accessory, iOS 12 or later is recommended.
Operation is Subject to the Following Two Conditions:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the follow two conditions:(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device must not be co-located or operating in conjunction with any other antenna
or transmitter, and must be installed and operated with a minimum distance of 20 cm
between the radiator and user body.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Cet appareil est conforme avec Industrie Canada exempts de licence standard
RSS(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet
appareil ne doit pas provoquer d’interferences et (2) cet appareil doit accepter
toute interference,y compris celles pouvant causer un mauvais fonctionnement de
l’appareil.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Create Date                     : 2018:12:07 17:18:34+08:00
Creator Tool                    : 
Modify Date                     : 2018:12:21 08:48:58+08:00
Metadata Date                   : 2018:12:21 08:48:58+08:00
Keywords                        : 
Producer                        : 福昕PDF编辑器打印机 版本 8.3.0.0331
Document ID                     : uuid:03f67593-13c2-4d34-9c9e-374d3702fba0
Instance ID                     : uuid:51fa1b13-f015-48f2-9572-9fd6cdd7e18d
Page Count                      : 4
Author                          : 
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ARYG-VP1

Navigation menu