Food Saver Mini Plus Users Manual FS/QuikTips/420 V1

V420 to the manual cea02d29-b4fc-483a-aff1-6ecff7260f84

: Food-Saver Food-Saver-Mini-Plus-Users-Manual-343307 food-saver-mini-plus-users-manual-343307 food-saver pdf

Open the PDF directly: View PDF .
Page Count: 4

Features

For important safety information and helpful tips, please refer to the FoodSaver Reference Guide

included in your kit. Questions? Visit us at www.foodsaver.com or call 1-800-777-5452 (U.S.) or

1-877-804-5383 (Canada). Get tips on vacuum packaging and order FoodSaver accessories.

QuickStart

V420/Mini Plus

Shown Mini Plus; V420 operates in the same manner.

Indicator Light

Open/Cancel Button

Accessory Port

Accessory Hose

D

C

B

A

Vacuum Channel

Rubber Gasket

Sealing Strip

G

F

E

Features of Your FoodSaver Appliance

Note: This appliance is a compact design that saves counter space.

It can be used with pint-size and quart-size FoodSaver Bags, and 6-inch

and 8-inch FoodSaver Rolls, plus any FoodSaver accessory.

Bags & Rolls

1. Place item(s) into bag, allowing at least 3 inches of

space between bag contents and top of bag.

2. Open appliance lid and place open end of bag

down into Vacuum Channel (E).

3. Close lid.

4. To begin vacuum process, press down firmly on

lid with both hands and hold. Motor and Indicator

Light (A) will turn on as vacuum process begins.

5. When motor and light turn off, release lid.

Vacuum process is complete. Indicator Light

will blink for 5 seconds as a reminder to press

Open/Cancel Button (B).

6. Press Open/Cancel Button to open lid and

remove bag. Refrigerate or freeze if needed. (See

FoodSaver Reference Guide for food safety tips.)

Tip: The Open/Cancel Button can also be used to

cancel vacuum process mid-way and open lid.

Note: Let appliance cool down for 20 seconds

after each use.

1. Cut enough bag material from roll to hold item

to be vacuum packaged, plus 3 inches. Be sure to

cut straight.

2. Open appliance lid and place one end of bag

material across Sealing Strip (G), not over

rubber gasket (F).

3. Close lid.

4. Press down firmly on lid with both hands and

hold. Motor and Indicator Light (A) will turn on

as bag is being sealed.

5. When motor and light turn off, release lid.

Indicator Light will blink for 5 seconds as a

reminder to press Open/Cancel Button (B).

6. Press Open/Cancel Button to open lid and

remove bag.

Now you are ready to vacuum package with your

new bag (see below).

Getting Started

Registering your appliance is quick and easy at www.foodsaver.com.

How to Make a Bag from a FoodSaver Roll

How to Vacuum Package with FoodSaver Bags

Place Bag on Sealing Strip Press and Release Lid

Place Bag in Vacuum Channel Press and Release Lid

Press Open/Cancel Button

Press Open/Cancel Button

g

Accessories

FoodSaver Accessory Guidelines

FoodSaver Accessories

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

1. Always leave at least one inch of space between

contents and rim.

2. Wipe rim of canister, container or bottle to ensure

it is clean and dry.

3. Place lid on canister or container, or place stopper

in bottle.

4. For accessories with a large knob on lid, turn knob

toVacuum. Vacuum package using instructions

below. When vacuum process is complete, turn

knob to Closed before removing Accessory Hose.

5. For accessories without a large knob on lid,

vacuum package using instructions below.

How to Open FoodSaver Accessories after Vacuum Packaging

FoodSaver Vacuum Packaging Canisters

(without large knob on lid)

To release vacuum and open, push gray rubber

button on lid.

FoodSaver Bulk Canisters and Quick Marinators

(with large knob on lid) and Universal Lids

To release vacuum and open, turn knob on lid

to Open.

FoodSaver Jar Sealer with Mason Jars

For use with Ball®and Kerr® brand Mason jars.

IMPORTANT: Do NOT use screw bands when

vacuum packaging jars. To open, wedge spoon

between Mason jar lid and highest part of threaded

rim. Twist spoon gently to release vacuum.

FoodSaver Bottle Stoppers

To release vacuum and open, twist and pull up on

Bottle Stopper.

How to Vacuum Package with FoodSaver Accessories

1. Prepare container according to FoodSaver

Accessory Guidelines above.

2. Insert one end of Accessory Hose (D) into

Accessory Port (C) on appliance. Insert other

end into port on accessory. Twist gray tab while

inserting to ensure a tight fit.

3. To begin vacuum process, press down firmly on

lid with both hands and hold. Motor and Indicator

Light (A) will turn on as vacuum process begins.

4. When motor and light turn off, release lid. Vacuum

process is complete.

5. Gently twist and remove Accessory Hose from

accessory and appliance.

6. To test vacuum, simply tug on accessory lid.

It should not move.

Note: For important tips on using accessories

with different foods, please refer to the FoodSaver

Reference Guide.

Insert Accessory Hose Press and Release Lid

Tips for Successful Vacuum Packaging

For more usage tips and safety information, please refer to the FoodSaver Reference Guide or visit our website at www.foodsaver.com.

General Tips

Removing Air from a Bag

If appliance lid is locked, press Open/Cancel

Button (B) to open lid.

Sealing a Bag

Make sure you’ve placed the bag in the proper place.

When making a bag from a roll, make sure end of cut

piece is on Sealing Strip (G), not over rubber gasket

(F) or in Vacuum Channel (E).

Prevent moisture or liquid from being pulled into

the Vacuum Channel or trapped in the seal. Either

pre-freeze moist foods such as raw meat for 1-2

hours before vacuum packaging, or place a folded

paper towel between food and end of bag to absorb

excess liquids. Just be sure to leave at least 3 inches

between paper towel and end of bag so that bag

seals properly with paper towel inside.

Make sure you give appliance time to cool down.

Wait at least 20 seconds between seals. Under very

heavy usage, appliance will shut off automatically to

prevent overheating. If it does, wait 20 minutes to

allow appliance to cool off.

Make sure you’ve placed the bag in the proper

place. When vacuuming packaging, make sure open

end of bag is inside Vacuum Channel (E).

Check for wrinkles in the bag along the Sealing

Strip. Wrinkles in seal may cause leakage and allow

air to come back into bag. Check for wrinkles in bag

along Sealing Strip (G) before closing lid and vacuum

packaging. If you find wrinkles after sealing bag,

simply cut bag open and vacuum package again.

If motor runs for more than 30 seconds without

stopping, you may need to adjust bag and try again.

If you are making initial seal on a piece of bag material

with two open ends, make sure bag is placed on

Sealing Strip, not on rubber gasket (F). If you are

vacuum packaging with a bag, make sure open end is

placed down inside Vacuum Channel and make sure

Accessory Hose (D) is not attached. If you are vacuum

packaging with an accessory, check Accessory Hose in

appliance lid and in accessory to ensure a tight fit.

Copyright © 2004 Tilia, Inc. All rights reserved. This material may not be reproduced or redistributed in any fashion without the express written consent of Tilia, Inc.

FoodSaver and the Freshness Shield logo are trademarks or registered trademarks of Tilia Int’l, Inc. in the United States and other countries. All other trademarks

are property of their respective owners. Tilia, Inc. and Tilia Int’l, Inc. are Jarden companies.This product is protected by one or more of the following Patents:

U.S. RE 34,929; 4,660,355; 4,941,310; 5,655,357; 6,058,998; 6,256,968; Canada 1,315,746; and their equivalent international patents.

First Printing: 6/2004 Item # T180-00210-000 (06/04)