Foreign Trade Technocel T120 TYLT Vu Car Charger User Manual ICXXXX TYLT VU CAR Guide ai

Download:
Mirror Download [FCC.gov]
Document ID	2401587
Application ID	Zv7Xm02uw58q70CmCWuylQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.33kB (279136 bits)
Date Submitted	2014-09-25 00:00:00
Date Available	2014-09-26 00:00:00
Creation Date	2014-07-29 15:10:29
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-08-04 08:52:50
Document Title	ICXXXX TYLT VU CAR - Guide.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mdigges

FCC Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Wireless
Charger
ENG PACKAGE CONTENTS
Vu Wireless Car Charger
Vu Power Adapter CLA w/ USB Output
1X Phone Rest Ledge
POSITIONING THE VU
Push in Release Lever Button to release suction cup.
Position VU on chosen flat surface and gently press
down on base while pushing the Release Lever to the
closed position.
POWERING THE VU
Insert the included Power Adapter CLA into your
vehicle’s 12V Cigarette Lighter, then insert the Plug
into the Vu Wireless Car Charger. A white LED will
illuminate when CLA is powered. The additional USB
output will charge an additional smartphone or tablet.
POWERING YOUR QI DEVICE
Place your Qi compatible device on the VU Pad surface
to begin charging.
FRA PACKAGE CONTENTS
Vu Wireless Car Charger
Vu Power Adapter CLA w/ USB Output
1X Phone Rest Ledge
POSITIONING
IONING THE VU
Push in Release
ase Lever Button to release suction
ction cup.
tly press
Position VU on chosen flat surface and gently
se while pushing the RRelease Lever
ever to the
down on base
on.
closed position.
POWERING
RING THE VU
Insert the included
cluded Po
Power Adapter CLA intoo your
Cigarett Lighter, then insert the Plug
vehicle’s 12VV Cigarette
Wi l Car
C Charger. A white LED
ED will
ill
into the Vu Wireless
illuminate when CLA is powered. The additional USB
output will charge an additional smartphone or tablet.
POWERING YOUR QI DEVICE
Place your Qi compatible device on the VU Pad surface
to begin charging.
ITA PACKAGE CONTENTS
Vu Wireless Car Charger
Vu Power Adapter CLA w/ USB Output
1X Phone Rest Ledge
POSITIONING
IONING THE VU
Push in Release
ase Lever Button to release suction
ction cup.
tly press
Position VU on chosen flat surface and gently
se while pushing the RRelease Lever
ever to the
down on base
on.
closed position.
POWERING
RING TH
THE VU
For more information on the Qi, wireless charging, Qi™
Charging Standard and a list of compatible smartphones,
please visit: www.TYLT.com/VÜ
©2014 TYLT. All rights reserved. TYLT® and the TYLT® logo
are registered trademarks of Foreign Trade Corp. Other
marks are the property or their respective owners. ICXXXX
Insert the included
cluded Po
Power Adapter CLA intoo your
Cigarett Lighter, then insert the Plug
vehicle’s 12VV Cigarette
Wi l Car
C Charger. A white LED
ED will
ill
into the Vu Wireless
illuminate when CLA is powered. The additional USB
output will charge an additional smartphone or tablet.
POWERING YOUR QI DEVICE
Place your Qi compatible device on the VU Pad surface
to begin charging.
ADJUSTING THE VU
TENSION NUT - The Tension Nut can be loosened
to adjust angle of the Vu Wireless Charger. Tighten
when desired angle is achieved.
GRIPPING ARMS - Press down on the Gripping
Arms Release Button to expand the gripping arms.
Gently push arms inward toward the center to secure
to your Qi compatible device.
REST LEDGE - To accommodate larger device
sizes, the rest ledge can be repositioned. Press the Foot
Release Button located on the rear of the Vu to release
Phone Rest Ledge. The ledge can be pulled down,
pushed up, or removed entirely.
SPECIFICATIONS - Input: 12V, .75A • Output: 5V, 1A
ADJUSTING THE VU
TENSION NUT - The Tension Nut can be loosened
to adjust angle of the Vu Wireless Charger. Tighten
when desired angle is achieved.
GRIPPING ARMS - Press down on the Gripping
Arms RRelease Button
tton to expand the gripp
gripping arms.
Gently push
pu arms
ms inward toward the cente
center to secure
to your Qi compatible
patible device.
DGE - To accommodate larger device
REST LEDGE
sizes, the rest ledge
edge can be repositioned. Pr
Press the Foot
Release BButtonn located on the rear of the Vu
V to release
Phone Rest Ledge.
dge. The ledge can be pulled down,
pushed up, or removed entirely.
SPECIFICATIONS - Input: 12V, .75A • Output: 5V, 1A
ADJUSTING THE VU
TENSION NUT - The Tension Nut can be loosened
to adjust angle of the Vu Wireless Charger. Tighten
when desired angle is achieved.
GRIPPING ARMS - Press down on the Gripping
Arms RRelease Button
tton to expand the gripp
gripping arms.
Gently push
pu arms
ms inward toward the cente
center to secure
to your Qi compatible
patible device.
DGE - To accommodate larger device
REST LEDGE
sizes, the rest ledge
edge can be repositioned. Pr
Press the Foot
Release BButtonn located on the rear of the Vu
V to release
Phone Rest Ledge.
dge. The ledge can be pulled down,
pushed up, or removed entirely.
SPECIFICATIONS - Input: 12V, .75A • Output: 5V, 1A
LED INDICATOR/TROUBLESHOOTING
While in Standby mode, the LED is OFF. Solid green LED
indicates the VU is delivering full power. Under any
type of error condition, the green LED will begin to
blink. A fast blink indicates a fault. Remove the phone
and place it back on the VU. If problem persists, unplug
the power adapter from the power source and
reconnect it. If the green LED is on but the device does
not charge, there may be a metal object near the coils.
Remove the device and check for foreign metal objects
and place device back on the car mount. This is a safety
feature and normal operation.
CARE AND MAINTENANCE
GENERAL: Keep Device Dry. Do NOT expose the device
to liquids. If device gets wet, immediately unplug it
and allow it to dry. Do not disassemble or attempt
repair. Do not store the device in high or low
temperatures.
SUCTION CUP: Place Suction Cup Base on dry, clean,
flat surfaces. The sticky suction will adhere to
LED INDICATOR/TROUBLESHOOTING
While in Standby mode, the LED is OFF. Solid green LED
indicates the VU is delivering full power. Under any
type of error condition, the green LED will begin to
blink. A fast blink indicates a fault. Remove the phone
sists, unplug
and place it back on the VU. If problem persists,
dapter from the power sou
the power adapter
source and
reconnect it. If the green LED is on but the device does
here may be a metal object near
ar the coils.
co
not charge, there
etal objects
Remove the device and check for fo
foreign metal
vice back on the car mount.
and place device
Thisis is a safety
feature and normal operation.
CARE AND MAINTE
MAINTENANCE
GENERAL: Keep
eep Device
Devi Dry. Do NOT exposee the dev
device
to liquids. If device ge
gets wet, immediately unplug it
and allow it to dry. Do not disassemble or attempt
repair. Do not store the device in high or low
temperatures.
SUCTION CUP: Place Suction Cup Base on dry, clean,
flat surfaces. The sticky suction will adhere to
LED INDICATOR/TROUBLESHOOTING
While in Standby mode, the LED is OFF. Solid green LED
indicates the VU is delivering full power. Under any
type of error condition, the green LED will begin to
blink. A fast blink indicates a fault. Remove the phone
sists, unplug
and place it back on the VU. If problem persists,
dapter from the power sou
the power adapter
source and
reconnect it. If the green LED is on but the device does
here may be a metal object near
ar the coils.
co
not charge, there
etal objects
Remove the device and check for fo
foreign metal
vice back on the car mount.
and place device
Thisis is a safety
feature and normal operation.
CARE AND MAINTE
MAINTENANCE
GENERAL: Keep
eep Device
Devi Dry. Do NOT exposee the dev
device
to liquids. If device ge
gets wet, immediately unplug it
and allow it to dry. Do not disassemble or attempt
repair. Do not store the device in high or low
temperatures.
SUCTION CUP: Place Suction Cup Base on dry, clean,
flat surfaces. The sticky suction will adhere to
• Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
To comply with FCC and other RF exposure requirements,
please maintain a distanceof 20cm between the charger
and your body when in use.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Changes or modifications made to this equipment not
expressly approved by the manufacturer may void the FCC
authorization to operate this equipment.
FCC ID: SZQ-T120
windshields and most dashboards.To remove, push in
the Release Lever Button, then pull up on the Suction
Cup Pull Tab. To clean the sticky suction cup, remove
the base from the phone mount. Run the sticky suction
cup under warm tap water. You may also use a mild
soap and gently rub off debris. Remove any residue
and let it air dry.
CAUTION
The Vu Wireless Car Charger is for charging
wireless charging enabled and Qi™ Charging
Standard compatible smartphones only.
The charging unit should only be used at
normal indoor room conditions.
The Vu Wireless Car Charger may become hot
during charging. Avoid direct contact with
highly flammable materials.
windshields and most dashboards.To remove, push in
the Release Lever Button, then pull up on the Suction
Cup Pull Tab. To clean the sticky suction cup, remove
the base from the phone mount. Run the sticky suction
cup under warm tap water. You may also use a mild
soap and
a gently rubb off debris. Remove any residue
and let it air dry.y.
CCAUTION
The Vu Wireless
eless Car Charger is for charging
char
wireless charging
wir
arging enabled and Qi™ Ch
Charging
Standard compatible
ompatible smartphones on
only.
The charging unit should only be use
used at
normal indoor room conditions.
The Vu Wireless Car Charger may become hot
during charging. Avoid direct contact with
highly flammable materials.
windshields and most dashboards.To remove, push in
the Release Lever Button, then pull up on the Suction
Cup Pull Tab. To clean the sticky suction cup, remove
the base from the phone mount. Run the sticky suction
cup under warm tap water. You may also use a mild
soap and
a gently rubb off debris. Remove any residue
and let it air dry.y.
CCAUTION
The Vu Wireless
eless Car Charger is for charging
char
wir
arging enabled and Qi™ Ch
wireless charging
Charging
Standard compatible
ompatible smartphones on
only.
The charging unit should only be use
used at
normal indoor room conditions.
The Vu Wireless Car Charger may become hot
during charging. Avoid direct contact with
highly flammable materials.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mdigges
Create Date                     : 2014:07:29 15:10:29-07:00
Modify Date                     : 2014:08:04 08:52:50+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:08:04 08:52:50+08:00
Format                          : application/pdf
Title                           : ICXXXX TYLT VU CAR - Guide.ai
Creator                         : mdigges
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Document ID                     : uuid:57bccd0a-8be6-434a-9635-acec6ed3cb40
Instance ID                     : uuid:a4a29bed-b94b-44ad-b316-d5dd1dbcc9c0
Page Count                      : 1

EXIF Metadata provided by EXIF.tools